i tried to install 9.43 kernel (dorimanx) via odin but it gave me the yellow triangle.. i used the program triangle away but after reboot phone doesn't boot (stuck at i9100 logo).. and i must reflash the 9.43 via odin.. then boot.. (but with triangle)
how can i solve this?
djsolidsnake86 said:
i tried to install 9.43 kernel (dorimanx) via odin but it gave me the yellow triangle.. i used the program triangle away but after reboot phone doesn't boot (stuck at i9100 logo).. and i must reflash the 9.43 via odin.. then boot.. (but with triangle)
how can i solve this?
Click to expand...
Click to collapse
Hmm.. triangle away has always worked whenvever i use it.
If you want to get rid of it that badly i suggest you go back to stock (to remove it) and then flash a custom recovery.. and then flash PhilZ kernel. It wont affect the triangle.
TheGovernment said:
Hmm.. triangle away has always worked whenvever i use it.
If you want to get rid of it that badly i suggest you go back to stock (to remove it) and then flash a custom recovery.. and then flash PhilZ kernel. It wont affect the triangle.
Click to expand...
Click to collapse
can you suggest me a custom recover and give me the link for philz kernel? thank you!
Depending your rom kernel code, you can find his thread here
Please help me. My Galaxy S2 show Yellow triangle on Start Logo.And then stuck at Logo.What can i do.
If your phone is stock & isn't rooted, boot into recovery - factory reset. If your phone is rooted & is running stock earlier or older than Android 4.0.4, boot into recovery - factory reset. If your phone is running rooted stock Android 4.0.4 or if the factory reset doesn't work in other examples, get stock rom from Samfirmware, flash with Odin in download mode.
'My Galaxy S2 show Yellow triangle on Start Logo.And then stuck at Logo.What can i do' doesn't even make it remotely easy to give you help. I reckon I've done a pretty fair job given that though. If you want help in future, you need to tell us everything about your phone (rom, Android version, etc) & what you've been doing with it recently.
Related
Is there a way to reflash a new Clockwork Mod recovery over the recovery image on my SG2?
What has happened is I flashed my Chainfires Root KF2 with CWM
Then I flashed the original Firmware KF2 over the top to get rid of the Yellow !
The CWM (as stated in the Chainfire post) may not work properly due to reflashing over it with another firmware (my 2nd flash)... I get this weird
can't access CSC system/csc issue... when i boot into recovery mode.
I was thinking if I could reflash a version of CWM over the top it might fix up the issue...
Any ideas? is it possible?
Cheers
unrealtb said:
Is there a way to reflash a new Clockwork Mod recovery over the recovery image on my SG2?
Yes
Then I flashed the original Firmware KF2 over the top to get rid of the Yellow !
Did instructions not tell you to flash kernel not firmware .
That fails do a wipe of phone put a stock full firmware on and start again is often the easy way as it clears all and even better if you format the phone before flashing .
jje
Click to expand...
Click to collapse
Oh so if i do the process again, but instead of reflashing stock the firmware I reflash the kernal at the end to get rid of the !.
Sorry i am a newb, I come from a modding a motorola backflip... seemed so much easier...
Sorry my bad... I did Flash CF-Root Firmware
and then flashed the orginal Kernel over the top....
So i did it correctly the first time...
If you get rid of the yellow triangle, just buy a jig at ebay (around 5 €). After plugging the jig on your phone it will boot in download mode and all download count data will be deleted.
For me it removed the yellow triangle at the boot screen (Kernel: CF-Root 4.0 KF2).
ok fellas go easy on me this is my first post....so....
I rooted my s4 using the odin/motochopper method worked great. I flashed twrp easy stuff. Now, When I try and flash a new rom the yellow triangle of irritation keeps stopping me. I have used the yellow triangle application and i confirmed in download mode that my flash counter was reset to 0. when I boot directly baack to my recovery, wipe, flash the yellow trangle still pops up. after much research Im going to assume my device automatically sets the flash count because i still have a custom recovery. Am I right? or am i using the yellpw triangle app incorrectly? how do you flash a recovery with odin? where the heck can i find one????? A step by step would of how to flash everything back to stock and ill root again using a different method or just how to permanente bypass of the samsung doucheness would be awesome. thank you in advance
Hi,
I've tried to install CWM on Galaxy i9100 and got a yellow triangle. So I re-flashed via odin the 4.1 and got it back.
But I want to know how to install CWM and a custom ROM without get this yellow triangle.
Thanks!
iAndroider said:
Hi,
I've tried to install CWM on Galaxy i9100 and got a yellow triangle. So I re-flashed via odin the 4.1 and got it back.
But I want to know how to install CWM and a custom ROM without get this yellow triangle.
Thanks!
Click to expand...
Click to collapse
You can just ignore the yellow traingle. Only if you want to send it for repair or something, then you need to remove it and put the counter back to 0. If you want to know how to do this, use search.
Christiaan91 said:
You can just ignore the yellow traingle. Only if you want to send it for repair or something, then you need to remove it and put the counter back to 0. If you want to know how to do this, use search.
Click to expand...
Click to collapse
But with this triangle it doesn't boot! Only download mode and recovery :/
iAndroider said:
But with this triangle it doesn't boot! Only download mode and recovery :/
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2462575
flashing a custom kernel (.tar file only) via Mobile Odin won't let that triangle show up ever again.
Sent from the little guy
Philz and apolo kernel can be flashed with odin without increasing flash counter 》》no yellow triangle
After flashing one of them flash any kernel/recovery/rom you want
Sent from my GT-I9100 using XDA Premium 4 mobile app
Or use Triangle Away. With the PhilZ Kernel, however, the flash counter does not increase.
Hi.
Im kinda new with root, cwm and roms. But I've stucked in with one thing. I've got i9100 intl. I've wanted to install CM10.2 but, anytime i try to replace 3e with cwm, after reboot still 3e starts, so I can't go any further. In mid 2013 I've replaced old 4.0.4ICS with noncarrier XEO (Poland) 4.1.2 Samsung orginal. I've used Odin, and everything works fine. But now I would like to learn more about roms, but can't, couse cwm won't replace orginal 3e. If I did something wrong, please point me.
pag-r said:
Hi.
Im kinda new with root, cwm and roms. But I've stucked in with one thing. I've got i9100 intl. I've wanted to install CM10.2 but, anytime i try to replace 3e with cwm, after reboot still 3e starts, so I can't go any further. In mid 2013 I've replaced old 4.0.4ICS with noncarrier XEO (Poland) 4.1.2 Samsung orginal. I've used Odin, and everything works fine. But now I would like to learn more about roms, but can't, couse cwm won't replace orginal 3e. If I did something wrong, please point me.
Click to expand...
Click to collapse
install dorimanx kernel v8.43 via odin
24064552635
Ok. I will try, but what if I would like to test cm? Is this mean I can't install cwm recovery at all? Im new, like I've wrote, but not new in Linux. I thought that, if I can install cwm recovery that I would install anyrom I wish. But I will try with dorinmanx anyway.
//edit
Kernel installed successfully. Does it mean, I can try to install cwm recovery or CM? How to remove yellow triangle which appears on the start?
pag-r said:
Kernel installed successfully. Does it mean, I can try to install cwm recovery or CM?
Click to expand...
Click to collapse
Along with the kernel you should have a custom recovery installed, now, and proceed to mount any custom ROM you want to try out.
How to remove yellow triangle which appears on the start?
Click to expand...
Click to collapse
Q4: When I turn my phone on, I see a yellow triangle. What is it and how can I get rid of it?
It will appear if you have flashed a non-official kernel from download mode. If you flash kernels using CWM recovery, Mobile Odin etc. you won't get this yellow triangle.
The easiest ways to remove it are to use the app Triangle Away OR use a USB Jig.
Click to expand...
Click to collapse
Thanks for help. Installing dorimanx kernel with cwm gives me oportunity to test CM and many others. Actually I need to export/import full contact list and text messages from stock to CM or any other rom and lastly be happy to use random rom.
Thanks again.
hi all,
i just purchased this S2 I9100 handset from one of my freind..he had rooted and installed some kitkat resurrenction mix custom rom which i did not like
i flashed cwm through odin but when it rebooted in yellow traingle..i cna go into cwm recovery mode by presiing (vol up+power+home), yellow triangle appears briefly and then cwm menu appears..but when i select REBOOT SYSTEM it again goes into yellow traiangle..
i have searched on net and right now downloading stock rom from sammy I9100XWLST FOR indian s2 i9100LKAINU
my question is if i just flash this rom thru odin will the triangle go away? odin or copy to sd card and flash via cwm?
or do i have to download kernel seperately also,..where do i find if yes?
thanks
dheerpat said:
hi all,
i just purchased this S2 I9100 handset from one of my freind..he had rooted and installed some kitkat resurrenction mix custom rom which i did not like
i flashed cwm through odin but when it rebooted in yellow traingle..i cna go into cwm recovery mode by presiing (vol up+power+home), yellow triangle appears briefly and then cwm menu appears..but when i select REBOOT SYSTEM it again goes into yellow traiangle..
i have searched on net and right now downloading stock rom from sammy I9100XWLST FOR indian s2 i9100LKAINU
my question is if i just flash this rom thru odin will the triangle go away? odin or copy to sd card and flash via cwm?
or do i have to download kernel seperately also,..where do i find if yes?
thanks
Click to expand...
Click to collapse
i had the same problem after install CWM for first time in my phone, i solve this installing triangle away
TriangleAway v3.26
sorry for bad english
kimera_v4 said:
i had the same problem after install CWM for first time in my phone, i solve this installing triangle away
TriangleAway v3.26
sorry for bad english
Click to expand...
Click to collapse
HI KIMERA,
how do i install the apk when the handset is not booting beyond yellow traiangle at all
dheerpat said:
HI KIMERA,
how do i install the apk when the handset is not booting beyond yellow traiangle at all
Click to expand...
Click to collapse
hmm... your phone is soft bricked....flash the stock rom, root your phone, install and execute triangle away, this should fix your problem
sorry for bad english
If you still want to, you can remove this triangle. But it's not doing any harm, so you can leave it like it is. Just so you know.