I would like to flash the carbon rom
this is my first time to flash a rom
do i have to flash a kernel first and root it first?
can someone tell me the step that i need to do?
Androidtso1 said:
I would like to flash the carbon rom
this is my first time to flash a rom
do i have to flash a kernel first and root it first?
can someone tell me the step that i need to do?
Click to expand...
Click to collapse
Root it first with dorimanx or philz kernel.
I think you want carbon android 4.4.x version? If you flashed a dorimanx kernel, flash a kitkat compatible CWM
Follow installation steps on the carbon thread.
Christiaan91 said:
Root it first with dorimanx or philz kernel.
I think you want carbon android 4.4.x version? If you flashed a dorimanx kernel, flash a kitkat compatible CWM
Follow installation steps on the carbon thread.
Click to expand...
Click to collapse
Carbon ROM with Android 4.3.1. this is what i found to flash.
Androidtso1 said:
Carbon ROM with Android 4.3.1. this is what i found to flash.
Click to expand...
Click to collapse
Then just.
Root it with dorimanx or philz kernel.
Then follow installation steps on the carbon thread.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
Then just.
Root it with dorimanx or philz kernel.
Then follow installation steps on the carbon thread.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
OMG. i rooted it with dorimanx,
and then it just keep rebooting and cant get into the page.
only showing the logo of the dorimanx.
should i keep go on installing the carbon rom?
or i should do something to fix it back first
Androidtso1 said:
OMG. i rooted it with dorimanx,
and then it just keep rebooting and cant get into the page.
only showing the logo of the dorimanx.
should i keep go on installing the carbon rom?
or i should do something to fix it back first
Click to expand...
Click to collapse
Don't know what version you flashed and what rom Android version you're now running. But I believe the v8 tar version is the one for Android 4.1.2.
Just flash carbon.
You did make a backup?
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
Don't know what version you flashed and what rom Android version you're now running. But I believe the v8 tar version is the one for Android 4.1.2.
Just flash carbon.
You did make a backup?
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
finally im in the carbon system now.
and i solve most of my problems too.
Im so happy about that.
thank you.
the last question is.
how can i sure my kernel are correct version.
after flashing the rom
can i flash the kernel again?
also, how can i unroot it as some of the apps require that no being rooted
Androidtso1 said:
finally im in the carbon system now.
and i solve most of my problems too.
Im so happy about that.
thank you.
the last question is.
how can i sure my kernel are correct version.
after flashing the rom
can i flash the kernel again?
also, how can i unroot it as some of the apps require that no being rooted
Click to expand...
Click to collapse
Read the threads of your rom and the kernel you want. Find out what Android and Mali version your rom is using and find the kernel that you need. If you don't know what your doing, stick to the kernel that comes with the rom.
Why do you want to unroot it? Of you want an other custom rom you need to root it again. You can't root it for some apps and unroot it for the other.
And please add [SOLVED] to the thread title
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
And please add [SOLVED] to the thread title
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
And give Christiaan91 a dozen of Thanks for helping you out
Related
As title says, is it possible to flash stock firmware(just firmware, not kernel or modem) as second rom, using Siyah kernel and CWM?
Which way, please?
Thank you!
P.S.: I just have dual boot with Sammy as second ROM, I have to update it...
The dualboot guide is in the Siyah thread
As I said, I just have dualboot. I need to flash an updated kernel to second rom, but I don't have a CWM package.
How to create it?
you want to flash a .tar firmware to the second rom?
swap ROMs, flash via odin, swap back.
But FYI, flashing ELLA will change your bootloader permanently and you probably won't be able to use triangle away
gpvecchi said:
As I said, I just have dualboot. I need to flash an updated kernel to second rom, but I don't have a CWM package.
How to create it?
Click to expand...
Click to collapse
Download a stockrom from Wanam thy are cwm package and can be flash tro second rom utilities in Stweaks.
http://forum.xda-developers.com/showthread.php?p=27255513
Verzonden door mijn GT-I9300 met xda premium
I'm going to install Paranoid Android 4.3 on my Galaxy S2. Please suggest a Kernel.
http://forum.xda-developers.com/showthread.php?t=2020336
Stock only atm.
andrewwright said:
Stock only atm.
Click to expand...
Click to collapse
I didn't get you. you meant the sock kernel?
Yes no options for other kernels. Stock only on 4.3 atm. Give it time and you will have a choice.
andrewwright said:
Yes no options for other kernels. Stock only on 4.3 atm. Give it time and you will have a choice.
Click to expand...
Click to collapse
Thanks for the quick reply.!
Heard this from another thread, to install Paranoid, you don't need to root. Is it true.!?
caspertechno said:
I didn't get you. you meant the sock kernel?
Click to expand...
Click to collapse
As for now after flashing the ROM don't change it. Just use what is bundled along
caspertechno said:
Thanks for the quick reply.!
Heard this from another thread, to install Paranoid, you don't need to root. Is it true.!?
Click to expand...
Click to collapse
Root is already done on custom roms. 4.3 has developers options and root in there. If you dont see dev options tap build about 5 times and it will come up in menu.
Edit: do you mean your on stock rom and no root? If so yes you need to root first. Sorry haven't read posts to well today.
What firmware do you have? Gb/ics/jb?
caspertechno said:
Thanks for the quick reply.!
Heard this from another thread, to install Paranoid, you don't need to root. Is it true.!?
Click to expand...
Click to collapse
ROM = Root, you will need root
andrewwright said:
Root is already done on custom roms. 4.3 has developers options and root in there. If you dont see dev options tap build about 5 times and it will come up in menu.
Edit: do you mean your on stock rom and no root? If so yes you need to root first. Sorry haven't read posts to well today.
What firmware do you have? Gb/ics/jb?
Click to expand...
Click to collapse
Yes, I'm on stock ROM. I'm on JellyBean 4.1.2.
For stock jb root use philz kernel. Any new one will do. Btw you do have a i9100 model?? Makes a dif it its a p or g and so on model. Your new to all this yes??
yo andrewwright, which rom and kernel are you on ?
andrewwright said:
For stock jb root use philz kernel. Any new one will do. Btw you do have a i9100 model?? Makes a dif it its a p or g and so on model. Your new to all this yes??
Click to expand...
Click to collapse
I had rooted an HTC Desire, for Cyanogen. First with Samsung and Paranoid. Btwn I have i9100 model.
So pick say lss philz zip and flash that in recovery. Make sure you put it on ext sd and go to recovery and then update. Reboot and root with cwm recovery is done. Then follow op in pa for how to install pa rom.
Im on biftor v11 with apollo kernel.
andrewwright said:
So pick say lss philz zip and flash that in recovery. Make sure you put it on ext sd and go to recovery and then update. Reboot and root with cwm recovery is done. Then follow op in pa for how to install pa rom.
Im on biftor v11 with apollo kernel.
Click to expand...
Click to collapse
Thanks. Will give it a try.!
Heyyy, so i just came back to android and felt like flashing some kitkat roms so as to enjoy those cool features kitkat offers..i'm currently running stock 4.1.2 JB.
as far as im concerned, first i should flash a rooted+cwm kernel through odin (which i flashed latest siyah for JB)... that went smooth and i got rooted and got cwm, problem is when i want to actually install any rom... I continually get "installation aborted" and the only way to make my phone usable again is to flash a stock firmware through odin.
any ideas ? thanks !
PD: I tried installing the "kitkat cwm compatible" thingy both through odin and through cwm, it did flash correctly, but phone fails to boot. if you dont get this last thing.. its this: http://forum.xda-developers.com/showthread.php?t=2546597
hope anyone out there can give me a hand since im tired of running stock :'(
check the OP again
have you read the OP before flashing KK custom rom. maybe u miss some part to flash it.
You can flash philz kernel on to of your stock JB to get root and recovery (no need to use Odin, you can flash through standard recovery). Then do a backup of your rom and after that flash a cwm-recovery >6.0.4.x (this is needed to be able to install s KitKat ROM). Boot directly after flashing into that recovery, wipe system and data and install KitKat.
Sent from my Nexus 7 using xda app-developers app
AndDiSa said:
You can flash philz kernel on to of your stock JB to get root and recovery (no need to use Odin, you can flash through standard recovery). Then do a backup of your rom and after that flash a cwm-recovery >6.0.4.x (this is needed to be able to install s KitKat ROM). Boot directly after flashing into that recovery, wipe system and data and install KitKat.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the info, i went to the philz kernel thread but i cannot seem to know which file should i download, he says i should look at the kernel code or something like that but i fail to find such thing, any idea ? pleasee. thanks
Poroto said:
Thanks for the info, i went to the philz kernel thread but i cannot seem to know which file should i download, he says i should look at the kernel code or something like that but i fail to find such thing, any idea ? pleasee. thanks
Click to expand...
Click to collapse
Look in settings - about phone (or take a screenshot and post it here)
Christiaan91 said:
Look in settings - about phone (or take a screenshot and post it here)
Click to expand...
Click to collapse
There goes the screenshot! Thanks!
Poroto said:
There goes the screenshot! Thanks!
Click to expand...
Click to collapse
I've got more information there.
Do you know what firmware you installed?
Or you can flash dorimanx kernel through Odin. It also gives you root access. Download this:
Kernel_Dorimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
If you don't know how to flash it through Odin, look in the op of the dorimanx kernel thread. Just above the download links it's explained.
After that follow the instructions from AndDiSa by flashing a kitkat compatible cwm etc.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
I've got more information there.
Do you know what firmware you installed?
Or you can flash dorimanx kernel through Odin. It also gives you root access. Download this:
Kernel_Dorimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
If you don't know how to flash it through Odin, look in the op of the dorimanx kernel thread. Just above the download links it's explained.
After that follow the instructions from AndDiSa by flashing a kitkat compatible cwm etc.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
i did that and now im running kitkat resurrection remix ! thanks a bunch !!
Solved .
Poroto said:
i did that and now im running kitkat resurrection remix ! thanks a bunch !!
Solved .
Click to expand...
Click to collapse
Good to hear. Please add [SOLVED] to the thread title.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
Good to hear. Please add [SOLVED] to the thread title.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
Done.
Hi mates,I downloaded the new version or beanstalk rom (kk rom) goes in recovery..wiped cache and dalvik,once i try to flash the rom an error occured (status 7) so i can't countinued..then i tried to reboot normally but the device stuck at the boot initial logo and self-reboot into recovery..also tried to do a restore BUT MD5 mismatched!What to do now?
Also did a factory reset but no luck.
anto989 said:
Hi mates,I downloaded the new version or beanstalk rom (kk rom) goes in recovery..wiped cache and dalvik,once i try to flash the rom an error occured (status 7) so i can't countinued..then i tried to reboot normally but the device stuck at the boot initial logo and self-reboot into recovery..also tried to do a restore BUT MD5 mismatched!What to do now?
Also did a factory reset but no luck.
Click to expand...
Click to collapse
to solve Rom Installation Aborted Status 7 follow this effective solution
http://youtu.be/NRVov2baCP8
For admins
I'M NOT SPAMMING PLEASE DONT BLOCK ME FOR SHARING THE LINK ,JUST DELETE THIS POST IF YOU WANT ,PLEASE PLEASE PLEASE PLEASE PLEASE ♥ ♥ ♥
anto989 said:
Hi mates,I downloaded the new version or beanstalk rom (kk rom) goes in recovery..wiped cache and dalvik,once i try to flash the rom an error occured (status 7) so i can't countinued..then i tried to reboot normally but the device stuck at the boot initial logo and self-reboot into recovery..also tried to do a restore BUT MD5 mismatched!What to do now?
Also did a factory reset but no luck.
Click to expand...
Click to collapse
Next time read before doing things!
Before flashing a kitkat rom you had to flash a kitkat compatible cwm.
Search for this and flash it. After that reboot into recovery and flash beanstalk.
And next time, please read.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
Next time read before doing things!
Before flashing a kitkat rom you had to flash a kitkat compatible cwm.
Search for this and flash it. After that reboot into recovery and flash beanstalk.
And next time, please read.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
I was already on kk beanstalk..I only had to update the newest release.
Can I use odin to flash a stock rom ( 4.1.2 for example)?
i'm unable to Mount usb storage via recovery
anto989 said:
I was already on kk beanstalk..I only had to update the newest release.
Click to expand...
Click to collapse
Did you use dorimanx?
Anyway flash the compatible CWM and flash beanstalk again. Should work
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
Did you use dorimanx?
Anyway flash the compatible CWM and flash beanstalk again. Should work
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
now I try..i'm on dori,yes
anto989 said:
now I try..i'm on dori,yes
Click to expand...
Click to collapse
Dorimanx kernels can't flash kitkat roms without changing the updater-script. If you don't know how you can change the updater-script, flash the kitkat compatible CWM before flashing beanstalk.
problem solved!thank u christiaan91!
anto989 said:
problem solved!thank u christiaan91!
Click to expand...
Click to collapse
Please add [SOLVED] to the thread title.
Dori kernal cant flash kk roms
Try to flash beanstalk rom with thiss recovery
http://d-h.st/gTF
Is there a special procedure I need to upgrade to a Kit-kat rom?
I'm running 4.3 rom (Jellybam) however when trying to to upgrade to their 4.4 build I had a status 7 error. Then I Tried tamskeys CM11 build and the install aborted also, I don't know the cause for these failed installs.... Please help..
Thank You
shaz20 said:
Is there a special procedure I need to upgrade to a Kit-kat rom?
I'm running 4.3 rom (Jellybam) however when trying to to upgrade to their 4.4 build I had a status 7 error. Then I Tried tamskeys CM11 build and the install aborted also, I don't know the cause for these failed installs.... Please help..
Thank You
Click to expand...
Click to collapse
Update to latest recovery
Verstuurd vanaf mijn GT-I9300 met Tapatalk
Thank you, but sorry I should have mentioned I'm already up to date on my recovery (CMW 6.0.4.6)
shaz20 said:
Thank you, but sorry I should have mentioned I'm already up to date on my recovery (CMW 6.0.4.6)
Click to expand...
Click to collapse
Flash this one:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300
And than try this awesome rom: http://forum.xda-developers.com/showthread.php?t=2603155
Sent from my GT-I9300 using Tapatalk
Thank you for your quick help you guys rock I'll try those when I have time and get back to ya'll, Maybe the weekend
Thanks again