Hello,
i just flashed CarbonRom (from here: http://forum.xda-developers.com/showthread.php?t=2447870) KitKat 4.4.2
Did full wipe, installed GApps, everything works fine but USB Debugging is disabled.
I checked everything under Settings but I can't find any point under settings. Normally it's under security oder developer but neither are there.
Anyone has a idea?
Thanks for your help
Greetings
xfd123 said:
Hello,
i just flashed CarbonRom (from here: http://forum.xda-developers.com/showthread.php?t=2447870) KitKat 4.4.2
Did full wipe, installed GApps, everything works fine but USB Debugging is disabled.
I checked everything under Settings but I can't find any point under settings. Normally it's under security oder developer but neither are there.
Anyone has a idea?
Thanks for your help
Greetings
Click to expand...
Click to collapse
In settings>about>software information>build number
keep tapping that until it says u as developer
After that enable it from settings> developer options
thank you very much that solved the problem
Only thing that I can say is... LoL :laugh:
And thx of course
Related
Hey everyone! I flashed a ROM this morning and it failed. One thing leading to the next I ended up with no OS on my phone and USB Debugging turned off. Now I want to turn on USB Debugging but the only menus I can access from the phone are "Recovery" and "Bootloader." Is there anyway to turn it on or am I screwed. Also, I kinda regret messing with all of these ROMs and rooting my phone so iif you guys can give me a link to a ROM that doesn't make any major changes to your phone here, that would be great. Or the original ROM that came with the phone would be good. Thanks in advance.
Forgot to mention. My phones a HTC One S Tmobile carrier. Thanks in advance.
Hi,
Well as far as i know the USB Debugging is an option that you can set on Android Settings. So if your os wont boot, then you can't enable it.
Anyway you should include your phone spec, so the experienced users can provide help with your ROM needs. Like if you got a samsung, you might be able to find your stock firmware on sammobile.com/firmwares
Hope this helps.
SmithFunk said:
Hi,
Well as far as i know the USB Debugging is an option that you can set on Android Settings. So if your os wont boot, then you can't enable it.
Anyway you should include your phone spec, so the experienced users can provide help with your ROM needs. Like if you got a samsung, you might be able to find your stock firmware on sammobile.com/firmwares
Hope this helps.
Click to expand...
Click to collapse
Thanks I forgot to put it up. I thought I put it in the title turns out I didn't.
Hi, I have installed the [ROM] Lenovo P780 Pre-rooted Official ROMs for Flash Tool with TWRP and now I do not find the "USB Debugging" option in the App option of System Settings. Instead appear a list of the applications installed where I can select any app change options.
This ROM comes configured to Root as default.
Saloiche said:
Hi, I have installed the [ROM] Lenovo P780 Pre-rooted Official ROMs for Flash Tool with TWRP and now I do not find the "USB Debugging" option in the App option of System Settings. Instead appear a list of the applications installed where I can select any app change options.
This ROM comes configured to Root as default.
Click to expand...
Click to collapse
I don't know if it is like other roms, but perhaps you may wanna try to go to the About phone and tapping 7 times on the "Build number" option to enable the Development settings menu.
rovama said:
I don't know if it is like other roms, but perhaps you may wanna try to go to the About phone and tapping 7 times on the "Build number" option to enable the Development settings menu.
Click to expand...
Click to collapse
You, sir... are a god!
Thanks!!
UranusHertz said:
You, sir... are a god!
Thanks!!
Click to expand...
Click to collapse
I'm glad that worked for you. I found that solution some time ago in this community
Thank you Rovama!. Works great.
Lenovo P780 USB driver
Saloiche said:
Thank you Rovama!. Works great.
Click to expand...
Click to collapse
Debugging is not working in my phone. I am not able to debug in my P780 as i could not find Driver "Lenovo P780". Do you have any idea about lenovo mobile usb drivers?
thank you very much it's really help me :laugh:
Hi, friend
first, i apology for my english
OK, the problem is
original rom P780 have developer mode at setting menu and i check "always mode" mean when i charging it,the display always on
then i upgrade rom without uncheck "always mode"
and new rom has no developer mode, it's gone
Now i can't change that. my display always on all night
how i do?
adb command or somthing but not root my phone plz
gorngame said:
Hi, friend
first, i apology for my english
OK, the problem is
original rom P780 have developer mode at setting menu and i check "always mode" mean when i charging it,the display always on
then i upgrade rom without uncheck "always mode"
and new rom has no developer mode, it's gone
Now i can't change that. my display always on all night
how i do?
adb command or somthing but not root my phone plz
Click to expand...
Click to collapse
Go to Version Infos, tap build number 7 times to re-enable Developer mode.
soralz said:
Go to Version Infos, tap build number 7 times to re-enable Developer mode.
Click to expand...
Click to collapse
thanks
hello guys m using Huawei Mediapad 7 Youth but its USB debugging option is disabled
please please help me to enable it so i can root it
its showing all that options but m unable to enable it
You mean it's disabled in the "Developer options" menu? Have you enable "developer options" yet?
It's a little trickier than that.
You have to tap the "Build number" in about phone several times.
If you pay attention, there is a counter which flashes up telling you hou many more times you need to tap.
mru55 said:
It's a little trickier than that.
You have to tap the "Build number" in about phone several times.
If you pay attention, there is a counter which flashes up telling you hou many more times you need to tap.
Click to expand...
Click to collapse
i know about that
usb debugging options are already available but are "DISABLED" m unable to ENABLE it
guide me that one please
Developer options.
Slider to on.
Then check USB debugging.
If you lose debugging when you close the screen, then you have probably disabled it with some security / anti-theft software such as Avast.
I was pretty sure you did, hence my question. Correct me if I'm wrong but you are running a custom ROM, aren't you? So, you must have rooted the phone before. If this problem is happening with this ROM only, then it is probably a compatibility problem. Have you asked for help on the ROM's thread here on XDA? Perhaps the developer can help you. I wish I could help you further but I have never used that ROM.
Its custom rom installed with security they disabled usb debugging, please help me to enable or root it
Sorry, you have to talk to the custom ROM people.
mru55 said:
Sorry, you have to talk to the custom ROM people.
Click to expand...
Click to collapse
they wont allow
any other option to root?
l2adiant said:
they wont allow
any other option to root?
Click to expand...
Click to collapse
Try a root software that runs directly from you phone, not your pc. It is a long shot, but worth trying. Otherwise, I guess you should consider changing to a less restricted ROM.
Alexei Volkoff said:
Try a root software that runs directly from you phone, not your pc. It is a long shot, but worth trying. Otherwise, I guess you should consider changing to a less restricted ROM.
Click to expand...
Click to collapse
tell me which software to use???? any suggestion?
or tell me how to install custom recovery without usb debug ?
Factory reset, or download an official Huawei ROM and install following the instructions.
l2adiant said:
tell me which software to use???? any suggestion?
or tell me how to install custom recovery without usb debug ?
Click to expand...
Click to collapse
Sorry, I can't recommend any specific app because I have never tried one first hand. You should ask for the opinion of people who have used these apps, here on XDA. As for the second question, I'm afraid I can't help you either.
However, the best solution is to stick to official ROMs. There are so many apps to customize so many different aspects of official ROMs that I've never felt the need to install custom ROMs in any of my phones. Pursuing this path of trying to root a ROM which the original developer doesn't want to be rooted is just a bag of hurt. It's not worth the trouble, IMO.
Good luck
The Youth was sort of the successor of the original MP, which I have, and which was better.
I think it has a locked Bootloader, but there probably is a solution here on XDA to unlock and root it, and probably a custom recovery, but no custom roms.
Is there an Oreo ROM for MATE LITE???Thx
zajcnr1 said:
Is there an Oreo ROM for MATE LITE???Thx
Click to expand...
Click to collapse
Not yet, unfortunately. Not even in internal testing build that I've seen so far.
duraaraa said:
Not yet, unfortunately. Not even in internal testing build that I've seen so far.
Click to expand...
Click to collapse
Hi, i bought 5 credits yesterday to flash firmware on fh. But i was unable to download the firmware let alone flash. The instructions for firmware flashing takes me back to rebranding instructions. My Mate 10 Alp 29 is already rebranded by the seller. The Hisuite version recommended to use did not work with my phone. It couldn't get connected with the phone no matter how much I tried.
thanks for the reply
peepee999 said:
Hi, i bought 5 credits yesterday to flash firmware on fh. But i was unable to download the firmware let alone flash. The instructions for firmware flashing takes me back to rebranding instructions. My Mate 10 Alp 29 is already rebranded by the seller. The Hisuite version recommended to use did not work with my phone. It couldn't get connected with the phone no matter how much I tried.
Click to expand...
Click to collapse
You need to remove whatever the newer version of HiSuite you used installed from the phone, and you need to enable USB debugging. It will definitely connect if you do it right.
duraaraa said:
You need to remove whatever the newer version of HiSuite you used installed from the phone, and you need to enable USB debugging. It will definitely connect if you do it right.
Click to expand...
Click to collapse
Ok but even the firmware i selected to download won't show up to be downloaded
peepee999 said:
Ok but even the firmware i selected to download won't show up to be downloaded
Click to expand...
Click to collapse
It has to be connected to download the firmware you selected... I'm not really sure what you're doing, so maybe contact FH support for further instructions, by email.
duraaraa said:
It has to be connected to download the firmware you selected... I'm not really sure what you're doing, so maybe contact FH support for further instructions, by email.
Click to expand...
Click to collapse
The Hisuite version refused to connect with my phone even after following the instructions u gave me above.
peepee999 said:
The Hisuite version refused to connect with my phone even after following the instructions u gave me above.
Click to expand...
Click to collapse
For it to connect, you need to make sure:
1. ADB is working (HiSuite will connect over ADB, not over HDB!!)
2. Any HiSuite software installed on the phone has been uninstalled.
It will definitely connect under the right conditions.
duraaraa said:
For it to connect, you need to make sure:
1. ADB is working (HiSuite will connect over ADB, not over HDB!!)
2. Any HiSuite software installed on the phone has been uninstalled.
It will definitely connect under the right conditions.
Click to expand...
Click to collapse
Please where do i enable ADB
peepee999 said:
Please where do i enable ADB
Click to expand...
Click to collapse
Tap the build number in about phone 7 times to enable developer mode. From developer options enable usb debugging.
peepee999 said:
Please where do i enable ADB
Click to expand...
Click to collapse
Settings -> System -> Developer Options -> turn on "USB debugging" and "OEM unlocking".
You have to activate the Developer Options first by taping 7 times on the build number but since you're on XDA you probably already know that.
Regards,
Safe
duraaraa said:
Tap the build number in about phone 7 times to enable developer mode. From developer options enable usb debugging.
Click to expand...
Click to collapse
So what's the next step after choosing the firmware
peepee999 said:
So what's the next step after choosing the firmware
Click to expand...
Click to collapse
Google for "updating android n huawei devices to android o using funkyhuawei"
You can see the instructions on the first hit for how to use HiSuite to install a firmware.
Maybe this work, but I have no idea...
https://www.needrom.com/download/huawei-mate-10-lite/
TheGamer69 said:
Maybe this work, but I have no idea...
https://www.needrom.com/download/huawei-mate-10-lite/
Click to expand...
Click to collapse
dont try it. its fake..