So I installed this ROM and tried to update my CWM using this. After I flashed the zip I rebooted my phone and now it won't start. I tried Power + Vol Up but the phone won't respond. I also tried charging, connecting to PC and trying to get into flash mode or fastboot mode but still no response. Help please? :/
@nycdream you realised you flashed an optimus 4x recovery? OP said you must fastboot the kernel inside the rom zip. Ok so you checked that you have proper drivers?
Sent from my Xperia P using Tapatalk
AndroidNoob69 said:
@nycdream you realised you flashed an optimus 4x recovery? OP said you must fastboot the kernel inside the rom zip. Ok so you checked that you have proper drivers?
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
I did. That was stupid on my part Android drivers? I do have them on my pc. I tried opening my phone and removing the battery flex but still won't boot.
nycdream said:
I did. That was stupid on my part Android drivers? I do have them on my pc. I tried opening my phone and removing the battery flex but still won't boot.
Click to expand...
Click to collapse
Ok so reinstall the flashmode and fastboot drivers and try to flash. Whats the response when you try to connect it in any mode?
Sent from my Xperia P using Tapatalk
AndroidNoob69 said:
Ok so reinstall the flashmode and fastboot drivers and try to flash. Whats the response when you try to connect it in any mode?
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
none. no LED's, nothing. is this beyond hope?
I suspect you might have screwed your boot partition up.
Sent from my Xperia P using Tapatalk
AndroidNoob69 said:
I suspect you might have screwed your boot partition up.
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
Well what can I do to fix this?
Did you try to flash the official firmware
Sent from my Xperia P using xda app-developers app
KiyazumiJr said:
Did you try to flash the official firmware
Sent from my Xperia P using xda app-developers app
Click to expand...
Click to collapse
He cant even get into flash mode or fastboot case his S1 Boot Partition is messed up.
Sent from my Xperia P using Tapatalk
You realy shouldn't flash the zip, fastboot would probably give you an error.
The zip wites to /dev/block/mmcblk0p1 which I don't know what it is for but probably shouldn't be touched.
fastboot had probably give you error
ChikeD said:
You realy shouldn't flash the zip, fastboot would probably give you an error.
The zip wites to /dev/block/mmcblk0p1 which I don't know what it is for but probably shouldn't be touched.
fastboot had probably give you error
Click to expand...
Click to collapse
But I already did Is my phone beyond hope of repairing?
nycdream said:
But I already did Is my phone beyond hope of repairing?
Click to expand...
Click to collapse
I would think so, not without special equipment and Sony's "bios".
I don't think they can repair such damage at service centers, though you can ask.
Related
Hi, I read the 'existing users' installation instructions on the Sspeed ICS rom and installed the rom without installing the ics rom and kernel (I was tired). When booting, I go in a bootloop with the doomkernel screen. I can access recovery fine.
When holding vol+ and connecting to PC the phone goes back into it's bootloop and does not boot into fastboot.
When holding vol- and connecting to PC the phone flashes the green led and then boots into bootloop.
Any help would be greatly appreciated.
Thank you
Press Vol up + power button for 15 sec till you get 3 vibrations,then use flashtools to flash stock firmware.
Sent from my LT26i using Tapatalk 2
gm007 said:
Press Vol up + power button for 15 sec till you get 3 vibrations,then use flashtools to flash stock firmware.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Hi, thanks for the quick reply. I have tried this before. When it gets to the screen saying connect your phone, when I hold Vol- and plug in it flashes green and then boots to doomlord screen, then loops.
Did you tried to flash the stock kernel with fastboot?
Try to install the drivers from flashtools folder.
Sent from my LT26i using Tapatalk 2
gm007 said:
Did you tried to flash the stock kernel with fastboot?
Try to install the drivers from flashtools folder.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Ive installed the xperia s, flashmode and fastboot drivers from the folder. Will fastboot work if the blue led does not come on?
tucka20 said:
Ive installed the xperia s, flashmode and fastboot drivers from the folder. Will fastboot work if the blue led does not come on?
Click to expand...
Click to collapse
No fastboot wont work if the blue led is not showing.
Did you tried to repair via pcc or sus?
Sent from my LT26i using Tapatalk 2
gm007 said:
No fastboot wont work if the blue led is not showing.
Did you tried to repair via pcc or sus?
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Forgot to mention the phone has an unlocked bootloader so don't think that will work. Is that correct?
tucka20 said:
Forgot to mention the phone has an unlocked bootloader so don't think that will work. Is that correct?
Click to expand...
Click to collapse
Yes bad idea.
Do you have the latest flashtools??
Try another firmware.
Sent from my LT26i using Tapatalk 2
gm007 said:
Try another firmware.
Click to expand...
Click to collapse
...And another section.
i flashed my phone with xperia S with cm9 a few days back, after some random boots it the mobile network used to go off " no service"...so i tried restoring back using cwm.while restoring it gave me an error "can't mount /data! and can't mount /system!"i made the backup soon after unlocking my boot loader (before installing cm9)...any idea what should i so?
like a douche though i tried updating via the zip method with cm9 again but there is a boot loop at cm9 logo and it doesn't go beyond that....sorry for the noobness...its my first android phone...
Flash your stock ROM using Flashtool.
Felimenta97 said:
Flash your stock ROM using Flashtool.
Click to expand...
Click to collapse
the problem is i can only access the recovery. i have downloaded the stock firmware in ftf format ...but how to use that in the flashtool? i mean when i try to flash it , it asks me to unplug the device, hold back button and connect...but with the xperia s how is that possible?
akshatverma73 said:
the problem is i can only access the recovery. i have downloaded the stock firmware in ftf format ...but how to use that in the flashtool? i mean when i try to flash it , it asks me to unplug the device, hold back button and connect...but with the xperia s how is that possible?
Click to expand...
Click to collapse
Hold the volume down button.
Sent from my LT26i with Tapatalk 2
thanks a ton for ur help...literally spent the whole night into it..
akshatverma73 said:
thanks a ton for ur help...literally spent the whole night into it..
Click to expand...
Click to collapse
Haha. No problem
Sent from my LT26i with Tapatalk 2
Felimenta97 said:
Haha. No problem
Sent from my LT26i with Tapatalk 2
Click to expand...
Click to collapse
the problem still persists tough ,i can't install ne custom roms...when i try restoring i get the same error "cant mount /system! "
Hi people... i have some serious problems... i have flashed recovery somehow...and It works.. everything els i want to flash-something I can flash something not (error 7.. installation aborted),But every time after flashing rom or kernel my phone is black,nothing happens,one vibration and than nothing..black screen,dead phone..can˙t enter recovery or even see boot logo... where is the problem? please help me because I run seus,root,xrec about 8 times a day to fix/solve this problem
piponxs said:
Hi people... i have some serious problems... i have flashed recovery somehow...and It works.. everything els i want to flash-something I can flash something not (error 7.. installation aborted),But every time after flashing rom or kernel my phone is black,nothing happens,one vibration and than nothing..black screen,dead phone..can˙t enter recovery or even see boot logo... where is the problem? please help me because I run seus,root,xrec about 8 times a day to fix/solve this problem
Click to expand...
Click to collapse
There is high chances of a system file being corrupted. Use flashtool to flash ftf fw. Then install any pre rooted kernel through command prompt using fastboot method.
Sent from my LT26i using Tapatalk 2
I forgot to tell, I cant enter fastboot mode... Phone keeps turning on after blue LED comes up,and somehow I can flash dualcore rom somehow... Only that rom but without kernel ofcourse
Sent from my LT26i using xda app-developers app
milton.bain said:
There is high chances of a system file being corrupted. Use flashtool to flash ftf fw. Then install any pre rooted kernel through command prompt using fastboot method.
Can you please give me link for working flashtool, can I use flashtool for x10?
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Sent from my LT26i using xda app-developers app
piponxs said:
I forgot to tell, I cant enter fastboot mode... Phone keeps turning on after blue LED comes up,and somehow I can flash dualcore rom somehow... Only that rom but without kernel ofcourse
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Install usb s1_fastboot drivers.
Sent from my LT26i using Tapatalk 2
Hi,
I recently tried installing JB rom into Xperia U and I forgot to flash JB kernel beforehand. Now the phone is into bootloop and restarts after dispalying sony logo in every five seconds. I am unable to enter recovery mode or safe mode. I tried installing stock ftf from flashtool but in vein.. thr phone just keeps restarting. Please help in solving the same.
anusgh said:
Hi,
I recently tried installing JB rom into Xperia U and I forgot to flash JB kernel beforehand. Now the phone is into bootloop and restarts after dispalying sony logo in every five seconds. I am unable to enter recovery mode or safe mode. I tried installing stock ftf from flashtool but in vein.. thr phone just keeps restarting. Please help in solving the same.
Click to expand...
Click to collapse
Keep the flashing process ready in the pc, remove the battery, put it back and try flashing.
Sent from my Xperia U using xda app-developers app
mrmbk said:
Keep the flashing process ready in the pc, remove the battery, put it back and try flashing.
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
Tried the same... but getting same error.... restarts every 5 seconds...
Man first try to flashing any kernel or custom kernel include cwm...
If cant run using flashtool.
Try find many tool in dev section..
Sent From C6603 Using xda premium
Originally Posted by mrmbk
Keep the flashing process ready in the pc, remove the battery, put it back and try flashing.
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
Tried the same... but getting same error.... restarts every 5 seconds...
Click to expand...
Click to collapse
Try entering fastboot and flash a custom kernel.
Sent from my Xperia U using xda app-developers app
while i install the chainfire3d,the phone suddenly shut down and bootloop,stucked at the sony icon screen and loop again,when i try to connect the usb cable ,the computer cannot detect my phone,HELP ME OUT !
alphaprosper12 said:
while i install the chainfire3d,the phone suddenly shut down and bootloop,stucked at the sony icon screen and loop again,when i try to connect the usb cable ,the computer cannot detect my phone,HELP ME OUT !
Click to expand...
Click to collapse
Chainfire 3D is incompatible with our phone. Download flashtool and ftf ROM and reflash it, you will be all right.
My device is not detected by my computer so i can't use flashtool
maxld said:
Chainfire 3D is incompatible with our phone. Download flashtool and ftf ROM and reflash it, you will be all right.
Click to expand...
Click to collapse
Maybe this chainfire3d driver crash my device ,that makes the phone can't detected while using usb cable?!
Does anyone have an debris file idea,flash the debris file at the sdcard?ok?
alphaprosper12 said:
Maybe this chainfire3d driver crash my device ,that makes the phone can't detected while using usb cable?!
Click to expand...
Click to collapse
Switch off the phone first. Then flash ftf via flash mode. Use the hard reset button to switch off phone
Sent from my C6833 using XDA Premium 4 mobile app
Yod did make a nandroid backup before flashing a driver that says it may render the phone unbootable?
You should beable to entre recovery if you have a nandroid backup, will save doing a full wipe with a FTF
Sadman Khan said:
Switch off the phone first. Then flash ftf via flash mode. Use the hard reset button to switch off phone
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Did u have flashable c6802 ftf?
blueether said:
Yod did make a nandroid backup before flashing a driver that says it may render the phone unbootable?
You should beable to entre recovery if you have a nandroid backup, will save doing a full wipe with a FTF
Click to expand...
Click to collapse
I don't have a nandroid backup,but i am very appreciate with that.
alphaprosper12 said:
Did u have flashable c6802 ftf?
Click to expand...
Click to collapse
Look around jn the forums. You'll find many
Sent from my C6833 using XDA Premium 4 mobile app
Thank you for your reply I have restore my phone now.
Sent from my C6802 using XDA Free mobile app
Sadman Khan said:
Switch off the phone first. Then flash ftf via flash mode. Use the hard reset button to switch off phone
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I also have the same problem. My C6833 is stucked in boot loop after trying to install chainfire 3d. I cant flash it with flashtool because it says that my phone is locked. btw I use the flashtool given by sony. TY please help me with my problem.
I have trouble using Androxyde's. It says "drivers need to be installed on connected device."