Hello !
First, thanks for all the job making each time ^^
Second, my problem ...
I just flash omega v17 AOKP on Samsung Galaxy S3 and he don't reboot ...
When he reboots after the installation, I got the black screen with Samsung galasy s3 for 10 seconds and then, the phone goes back in the recovery mode.
And idea ?
Wipe phone factory reset read the rom install instructions .
JJEgan said:
Wipe phone factory reset
Click to expand...
Click to collapse
Done
read the rom install instructions .
Click to expand...
Click to collapse
Already done
I did everything step by step ...
Edit: I took the 4.4 android instead of the 4.3, maybe is it the reason ?
I'm trying the 4.3 and post backup
Edit 2: I tryed version 4.3 and it works. So new question, what should I do for installing the version 4.4.2 ?
94882383 2411
JessX said:
Done
Already done
I did everything step by step ...
Edit: I took the 4.4 android instead of the 4.3, maybe is it the reason ?
I'm trying the 4.3 and post backup
Edit 2: I tryed version 4.3 and it works. So new question, what should I do for installing the version 4.4.2 ?
Click to expand...
Click to collapse
up
Related
HyDrOG3N-ICS 10.04
http://forum.xda-developers.com/showthread.php?t=1530179
This is ROM is not working on my device, please can anyone help. when i flash it with wipin factory reset & system format after i rebooted the device but the rom is not getting load only startup screen appearing.
My firmware is : XXLA4
Android Version : 2.3.6
Please help me!
if u want to try aokp rom then resurrection rom 1.3 is also good which is customized using aokp and cm9.
CaptaiN Gosh said:
HyDrOG3N-ICS 10.04
http://forum.xda-developers.com/showthread.php?t=1530179
This is ROM is not working on my device, please can anyone help. when i flash it with wipin factory reset & system format after i rebooted the device but the rom is not getting load only startup screen appearing.
My firmware is : XXLA4
Android Version : 2.3.6
Please help me!
Click to expand...
Click to collapse
Usual reason is you are not following the instructions go back and read them then flash again . Make sure you are flashing a zip via CWM recovery .
possibly you would be better flashing a GB rom as a learning point first .
jje
Are you wiping data?
Sent from my GT-I9100 using xda premium
How long did you wait?
It takes the phone a couple of minutes to boot after a wipe.
JJEgan said:
Usual reason is you are not following the instructions go back and read them then flash again . Make sure you are flashing a zip via CWM recovery .
possibly you would be better flashing a GB rom as a learning point first .
jje
Click to expand...
Click to collapse
Yes...i did follow those instruction correctly. but its not working... , i realy like that rom.
macho3215 said:
Are you wiping data?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes am wiping data & formatting the system only.
thelossa said:
How long did you wait?
It takes the phone a couple of minutes to boot after a wipe.
Click to expand...
Click to collapse
I waited more than 5 mins...
MyLifeRocks10 said:
if u want to try aokp rom then resurrection rom 1.3 is also good which is customized using aokp and cm9.
Click to expand...
Click to collapse
thankz bro..ill try that also...!
Hi Guys
Help needed!!!
1) I rooted my Phone with Oden v 1.85
2) Installed Recovery-cwmtouch-6.0.3.1
3) Then installed FoxHound 4.1.2 XXEMA2 Jelly Bean Custom ROM on my Galaxy S3
This was all not that difficult. But can someone please help me in telling me the process to remove FoxHound and revert back to stock SAMSUNG ROM? I have already downloaded the stand alone ROM from SAM Mobile. What do I do with the CWM Touch that is installed on the phone and how do i revert to standard ROM? Would be much appreciated since i am not very good at this
Thanks beforehand
Aquacile said:
Hi Guys
Help needed!!!
1) I rooted my Phone with Oden v 1.85
2) Installed Recovery-cwmtouch-6.0.3.1
3) Then installed FoxHound 4.1.2 XXEMA2 Jelly Bean Custom ROM on my Galaxy S3
This was all not that difficult. But can someone please help me in telling me the process to remove FoxHound and revert back to stock SAMSUNG ROM? I have already downloaded the stand alone ROM from SAM Mobile. What do I do with the CWM Touch that is installed on the phone and how do i revert to standard ROM? Would be much appreciated since i am not very good at this
Thanks beforehand
Click to expand...
Click to collapse
Please read the faqs and guides first .
See return to stock for warranty post in General section .
jje
just flash a stock rom from desktop odin. you really should concentrate on basics
sent from my GT-I9300 running CM10.1 RC4.4 by Temasek
sriram231092 said:
just flash a stock rom from desktop odin. you really should concentrate on basics
sent from my GT-I9300 running CM10.1 RC4.4 by Temasek
Click to expand...
Click to collapse
Found the Unroot page here http://forum.xda-developers.com/showthread.php?t=1710613, however I have one question! After step 7 must the Phone be in Download mode (Reboot: Home,Lock and Volume Down) to proceed to step 8?
Aquacile said:
Found the Unroot page here http://forum.xda-developers.com/showthread.php?t=1710613, however I have one question! After step 7 must the Phone be in Download mode (Reboot: Home,Lock and Volume Down) to proceed to step 8?
Click to expand...
Click to collapse
Yes download mode .
jje
JJEgan said:
Yes download mode .
jje
Click to expand...
Click to collapse
Okay followed the Procedure but after first reboor Device stays Loops on Samsung Logo, what now guys, do i put it in download mode agian and resend the Stock firmware with Odin or recovery mode ....then?
Aquacile said:
Okay followed the Procedure but after first reboor Device stays Loops on Samsung Logo, what now guys, do i put it in download mode agian and resend the Stock firmware with Odin or recovery mode ....then?
Click to expand...
Click to collapse
Fixed Thanks
Guys I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits. I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen. So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard. It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package. Thank you. Looking forward to an earlier response sorry if i had posted in a wrong section. i am new to the forum
machokingjim said:
Guys I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits. I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen. So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard. It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package. Thank you. Looking forward to an earlier response sorry if i had posted in a wrong section. i am new to the forum
Click to expand...
Click to collapse
ok donw get worry u have to update cwmr to the latest version so u dont get that annoing 7 error
btw i succeded instal cyanogen and omega with twrp...allso got 7 error on cyanogen mod with cwmr
Laurentiu27 said:
ok donw get worry u have to update cwmr to the latest version so u dont get that annoing 7 error
btw i succeded instal cyanogen and omega with twrp...allso got 7 error on cyanogen mod with cwmr
Click to expand...
Click to collapse
so it doesnt matter what type of kernel we are using??
and now i tried flashing a paranoid rom and it is returning E:signature verification failed. please help me with something. Thank you
the kernel will flash with new ROM so the old kernel isn't important, it's delete in flash process.
I've the same problem whit cwmr6, but using cwmr 5.5 it seems resolved.
Cornhelius said:
the kernel will flash with new ROM so the old kernel isn't important, it's delete in flash process.
I've the same problem whit cwmr6, but using cwmr 5.5 it seems resolved.
Click to expand...
Click to collapse
so what can i do for now to gain my access to the phone? It doesnt show me anything except for the boot screen.
problem solved
Hii!! :laugh:
I hope I am not making an error by posting here, I am a little new to here so be king please :angel:
I just want to install Philz CMW6 on my I9100G so I can install a kitkat custom ROM; I have been facing problems with this, I tried many ROMs ( CM11 unofficial, SuperNexus, SlimRom, OmniROM .. ) but I failed everytime, I realized that my CWM was not suitable. So I started looking for it I found a good thread http://forum.xda-developers.com/showthread.php?t=2201860 after installing the CWM it goes right installing ROMs but got stuck into bootloop.
So, if someone can give me the .tar.md5 file I can flash using Odin or maybe another thing to take care of.
Thank you
PS: I had CM 10.2
Running official stock ROM : JB 4.1.2
thesm said:
Hii!! :laugh:
I hope I am not making an error by posting here, I am a little new to here so be king please :angel:
I just want to install Philz CMW6 on my I9100G so I can install a kitkat custom ROM; I have been facing problems with this, I tried many ROMs ( CM11 unofficial, SuperNexus, SlimRom, OmniROM .. ) but I failed everytime, I realized that my CWM was not suitable. So I started looking for it I found a good thread http://forum.xda-developers.com/showthread.php?t=2201860 after installing the CWM it goes right installing ROMs but got stuck into bootloop.
So, if someone can give me the .tar.md5 file I can flash using Odin or maybe another thing to take care of.
Thank you
PS: I had CM 10.2
Running official stock ROM : JB 4.1.2
Click to expand...
Click to collapse
Try this steps:
1. Use the method in this thread (http://forum.xda-developers.com/showthread.php?t=2365701) to flash JB stock + root. note that it's better to flash the kernel via recovery after it's on your external sd-card or sideload with adb. This way you don't get the triangle warning and no binary count.
2. Download the kitkat compatible CWM from here: (http://downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip)
3. Flash the CWM and reboot to recovery (advanced -> reboot recovery)
4. Flash your Kitkat rom (with all the necessary wipes of course )
PureMind0 said:
Try this steps:
1. Use the method in this thread (http://forum.xda-developers.com/showthread.php?t=2365701) to flash JB stock + root. note that it's better to flash the kernel via recovery after it's on your external sd-card or sideload with adb. This way you don't get the triangle warning and no binary count.
2. Download the kitkat compatible CWM from here: (http://downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip)
3. Flash the CWM and reboot to recovery (advanced -> reboot recovery)
4. Flash your Kitkat rom (with all the necessary wipes of course )
Click to expand...
Click to collapse
I tried this but I got stuck on boot again, and knowing that the CWM that you gived don't work :/ ( my model is I9100G I think that this is the reason ).
I have read somewhere that maybe the wipe data / factory reset is the source of problem. I am not sure where I am doing wrong
thanks
thesm said:
I tried this but I got stuck on boot again, and knowing that the CWM that you gived don't work :/ ( my model is I9100G I think that this is the reason ).
I have read somewhere that maybe the wipe data / factory reset is the source of problem. I am not sure where I am doing wrong
thanks
Click to expand...
Click to collapse
oh then I've missed the G :\
in that case you should probably try this thread http://forum.xda-developers.com/showthread.php?t=2199288
stock firmwares for i9100G
PureMind0 said:
oh then I've missed the G :\
in that case you should probably try this thread http://forum.xda-developers.com/showthread.php?t=2199288
stock firmwares for i9100G
Click to expand...
Click to collapse
Hi again!
I flashed stock ROM 4.1.3 and my phone's is going good. but I'm having troubles to go back to CM I don't see what the problem is but I think to change the phone, maybe it's enough for it
And I think about buying a tablet, what do you think Nexus 7 or Samsung Tab 3 ?
thesm said:
Hi again!
I flashed stock ROM 4.1.3 and my phone's is going good. but I'm having troubles to go back to CM I don't see what the problem is but I think to change the phone, maybe it's enough for it
And I think about buying a tablet, what do you think Nexus 7 or Samsung Tab 3 ?
Click to expand...
Click to collapse
Ask here
http://forum.xda-developers.com/showthread.php?t=1846277
Sent from my GT-I9100 using Tapatalk 2
hey guys,
Well i wanted to install CM 11 nightly ( also tried snapshot cm11), but when it was preparing to install it came up with an Status 7 error.
I have tried to intall it fo over 8 timesnow.
Als what happend, when i get the error and then reboot the phone, i only can get back into CMW and not into the android version intalld on it, so i installed stock android back to t and tired and tried and tied again... .
But i canot find an fix it ..
I am trying to root the Phone now,, and guess what.. i cannot get it rooted... HELP!?
Can someone help me please to fix this poblem?
hoenens said:
hey guys,
Well i wanted to install CM 11 nightly ( also tried snapshot cm11), but when it was preparing to install it came up with an Status 7 error.
I have tried to intall it fo over 8 timesnow.
Als what happend, when i get the error and then reboot the phone, i only can get back into CMW and not into the android version intalld on it, so i installed stock android back to t and tired and tried and tied again... .
But i canot find an fix it ..
I am trying to root the Phone now,, and guess what.. i cannot get it rooted... HELP!?
Can someone help me please to fix this poblem?
Click to expand...
Click to collapse
Almost every kernel dev provides a .tar version of his kernel for initial rooting / custom recovery install.
Per example apolo, gustavo and dorimanx.
Grab one of these, flash trough Odin and start from there.
Hint, you need at least CWM 6.0.45 for installing cm11.
Regards.
Tapatalked from my Galaxy SII
Y u no guys read op?
Imo if u read u will be safe.
It has been said several times that u need latest cwm for installing kitkat.
Sent from my GT-I9100 using Tapatalk 2
Where to get this latest version of CMW?
hoenens said:
Where to get this latest version of CMW?
Click to expand...
Click to collapse
Flash any cm10.2 rom
Sent from my GT-I9100 using Tapatalk 2
Fixed!
Ok,, i don't know how i did it.. but i got it fixd now i have the latest nighly installed without anyproblem
hoenens said:
Ok,, i don't know how i did it.. but i got it fixd now i have the latest nighly installed without anyproblem
Click to expand...
Click to collapse
Good! Now please add [SOLVED] in your title and spell Status right please