My xperia neo v wont go beyond sony logo...
My phone has a locked bootloader ,Clockwork recovery+rooted.I was using stock sony rom 4.04 ics .587
I accidently tried to install a rom that requires unlocked bootloader(iam an idiot) ,So now my phone wont boot up not even in recovery....
I remember that while installing the wrong rom..it showed "installation aborted"
What should i do now.....help:crying:.................do you think my bootloader may be messed up
>>Should i flash 4.04 rom myself using flashtool...(update) iam unable to flash anything
When you go into flashmode (back button + power) do your LED blink?
As I can see you have Windows 8 are you sure you have properly drivers installed?
Try redownloading the ftf, seems like the problem is in ur ftf cause when it loads the loader it aborts it
mati865 said:
When you go into flashmode (back button + power) do your LED blink?
As I can see you have Windows 8 are you sure you have properly drivers installed?
Click to expand...
Click to collapse
No..led becomes blue for fastboot mode(pressing menu while connecting usb) and green for flash mode(back button while connecting usb)......I think it may be due to drivers.(win 8.1 has some compability issues as I have heard)
TakuyaZ said:
Try redownloading the ftf, seems like the problem is in ur ftf cause when it loads the loader it aborts it
Click to expand...
Click to collapse
Yup problem solved...i had driver problem.My phone is up and working fine thanks...
Related
I have rooted my phone,and insttalled CWM.Further when i m trying to flash by CWM the touch screen is not working.Cannot install http://forum.xda-developers.com/showthread.php?t=1748576
Navigate with volume +/-, select with Home
Feanor88 said:
Navigate with volume +/-, select with Home
Click to expand...
Click to collapse
Yes.But there is a agree option i cannot mark that.Is any thing wrong with my fone???
Mmm... I don't know. I successfully managed to install exMIUI and MiniCMSandwich without using the touchscreen. I don't think CyanogenTimescape has a different installer, but you should aske in the proper ROM thread. Anyway, I'll probably try to install it today... I'll let you know.
When select boxes surges in aroma installer you have first to selct that box, and for that you don't use the touchscreen but the volume +/-!
And to select that box you have to click the volume + key, and when in the box, you can select the option you want with the volume -/+, and then returns down to the "next" button.
I think is that you are asking, and if so, there is nothing wrong with your touchscreen!
mp_ruda said:
When select boxes surges in aroma installer you have first to selct that box, and for that you don't use the touchscreen but the volume +/-!
And to select that box you have to click the volume + key, and when in the box, you can select the option you want with the volume -/+, and then returns down to the "next" button.
I think is that you are asking, and if so, there is nothing wrong with your touchscreen!
Click to expand...
Click to collapse
I have managed this prob myself!!!thnx,,,,
Sent from my ST15i using xda app-developers app
hello friends
I'm new here, I have ST15i ROOTED only with locked bootloader...
how can I install cwm - and how to enter cwm mode
AROMA screen calibration
juabhi said:
I have managed this prob myself!!!thnx,,,,
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
i have the same problem hope you can help me
i unlocked the bootloader of my st15i phone then proceed on rooting my device
i manage to downgrade it to GB from ICS with no problem at all
i flash NEROICS but i didnt notice that this ROM already includes aroma on it
meaning to say i put in NEROICS ROM and AROMA installer separately on my sdcard
i managed to flash NEROICS ROM with no problem at all then i restarted my device and went to CWM to flash AROMA installer
it asked me to calibrate the screen which i did then all of a sudden calibration fails
so the screen didn't respond as expected now and the only thing which i can do toi set it up is to use the vol up and down and the menu key
after setting it up still the screen didn't work as expected
i tried formatting the system dalvic cache sd card etc via cwm and try putting in new ROM but still the same
i choose to relock the bootloader and put back the stock ROM hoping that PC companion or SEUS might fix the problem with my screen
but unfortunately when i restarted the phone its all black screen
SEUS and PC Companion able to detect my device but in PC Companion it recognized my phone but not its model (SONY XPERIA PHONE Connected)
i cant use my phone now and stuck in a blackscreen and SEUS or PC Companion wont help me at all
i cant root my st15i now as i relock its bootloader and icant unlock the bootloader because my phone displays just a blackscreen..and i no longer have the box of it and i cant find any alternative way to find its imei and unlock the bootloader..
pls help
Kian0926 said:
i have the same problem hope you can help me
i unlocked the bootloader of my st15i phone then proceed on rooting my device
i manage to downgrade it to GB from ICS with no problem at all
i flash NEROICS but i didnt notice that this ROM already includes aroma on it
meaning to say i put in NEROICS ROM and AROMA installer separately on my sdcard
i managed to flash NEROICS ROM with no problem at all then i restarted my device and went to CWM to flash AROMA installer
it asked me to calibrate the screen which i did then all of a sudden calibration fails
so the screen didn't respond as expected now and the only thing which i can do toi set it up is to use the vol up and down and the menu key
after setting it up still the screen didn't work as expected
i tried formatting the system dalvic cache sd card etc via cwm and try putting in new ROM but still the same
i choose to relock the bootloader and put back the stock ROM hoping that PC companion or SEUS might fix the problem with my screen
but unfortunately when i restarted the phone its all black screen
SEUS and PC Companion able to detect my device but in PC Companion it recognized my phone but not its model (SONY XPERIA PHONE Connected)
i cant use my phone now and stuck in a blackscreen and SEUS or PC Companion wont help me at all
i cant root my st15i now as i relock its bootloader and icant unlock the bootloader because my phone displays just a blackscreen..and i no longer have the box of it and i cant find any alternative way to find its imei and unlock the bootloader..
pls help
Click to expand...
Click to collapse
Flash with flashtool my friend here is complete Guide
daydu19 said:
Flash with flashtool my friend here is complete Guide
Click to expand...
Click to collapse
but my problem my friend is i can no longer proceed on the process as my BOOTLOADER is now locked again and my phone is completely blank black screen
i dont have my IMEI number coz i no longer have the box with me..
Kian0926 said:
but my problem my friend is i can no longer proceed on the process as my BOOTLOADER is now locked again and my phone is completely blank black screen
i dont have my IMEI number coz i no longer have the box with me..
Click to expand...
Click to collapse
just remove your battery and IMEI number is right there bro
daydu19 said:
just remove your battery and IMEI number is right there bro
Click to expand...
Click to collapse
i managed to unlock the bootloader anf flash it with .62 firmware and the st15i is now working again however the touch and softkeys are not working and i wasnt able to turn on the USB debugging..i cant proceed on rooting the phone that will enable me to go to cwm..please help
Kian0926 said:
but my problem my friend is i can no longer proceed on the process as my BOOTLOADER is now locked again and my phone is completely blank black screen
i dont have my IMEI number coz i no longer have the box with me..
Click to expand...
Click to collapse
Flashing via flashtool doesn't need you to turn your phone on.So,Download an official firmware from the thread "daydu19: has given and try to flash with flashtool. Flashtool needs your phone to be off and volume down key pressed when you connect your phone to your PC. If it fails,try "6. Turning the "brick" into a smartphone" from the thread. Link: http://forum.xda-developers.com/showthread.php?t=1568792
Official firmwares Flashing with flashtool guide: http://forum.xda-developers.com/showthread.php?t=1695514
juabhi said:
I have rooted my phone,and insttalled CWM.Further when i m trying to flash by CWM the touch screen is not working.Cannot install http://forum.xda-developers.com/showthread.php?t=1748576
Click to expand...
Click to collapse
I finally managed it with the volume buttons, though it was hard, moving blindly.
On most screens, one time volume up ends you on the 'next' button, so when you press the power button, you progress to the next screen.
Hi.I flashed FireDroid 1.2 for Locked bootloader on my Xperia U yesterday but now i cant get back to stock.
I cant flash stock rom over flashtool because i get error flashing,flashing aborted error every time.
And i cant repair it over PC Companion because i wont detect my phone.
Please help me to get back to stock
robimarko said:
Hi.I flashed FireDroid 1.2 for Locked bootloader on my Xperia U yesterday but now i cant get back to stock.
I cant flash stock rom over flashtool because i get error flashing,flashing aborted error every time.
And i cant repair it over PC Companion because i wont detect my phone.
Please help me to get back to stock
Click to expand...
Click to collapse
Post screenshot for flashtool error
For pc companion, go to setting - storage - press menu - (something like computer connection) - choose mtp mode
Never say 'thanks', but HIT it!
robimarko said:
Hi.I flashed FireDroid 1.2 for Locked bootloader on my Xperia U yesterday but now i cant get back to stock.
I cant flash stock rom over flashtool because i get error flashing,flashing aborted error every time.
And i cant repair it over PC Companion because i wont detect my phone.
Please help me to get back to stock
Click to expand...
Click to collapse
Make sure u r connecting the phone properly
While connecting just press the volume down button and keep it pressed until u see green light after connecting usb
NO NEED TO PRESS POWER BUTTON ALONG WID VOLUME DOWN
Or if you can get into fastboot, you need to flash a stock based kernel. CM uses a different kernel which is why you're having problems.
Help I accidentally flashed a wrong kernel to my xperia SOLA MT27i. It won't turn on now and PC can't detect it either.
Please advise.
melvinpetix said:
Help I accidentally flashed a wrong kernel to my xperia SOLA MT27i. It won't turn on now and PC can't detect it either.
Please advise.
Click to expand...
Click to collapse
I suppose the phone is off now?
If so try: download stock ROM and put it in flashtool/firmware, start flashtool, choose the stock rom with wipe data, vol - and put USB in so you can enter flashtool mode and flash official ROM.
mirost1 said:
I suppose the phone is off now?
If so try: download stock ROM and put it in flashtool/firmware, start flashtool, choose the stock rom with wipe data, vol - and put USB in so you can enter flashtool mode and flash official ROM.
Click to expand...
Click to collapse
I've tried connecting sola to PC but it seems like flashtool can't detect it. Is there other way to connect it to PC so flashtool can detect the device? I already downloaded stock firmware
Still no luck
1) Hold power + vol up until you feel the phone vibrates 3 times.
Quickly hold power down, and shove the USB wire in.
It should detect your phone in flashboot now.
2) Alternatively, after the phone vibrates 3 times, keep a hold on vol up to get it into fastboot. Then flash the correct kernel for the rom you have.
Note that ICS, GB and CM roms all use a different kernel. Make sure you have the right one.
3) Lastly, if your phone's bootloader is still locked, you can just repair using SUS.
Hi I'm BrianXYap New to XDA. So I recently just rooted my Sk17i but didn't unlock boot loader. I was trying to install cm10 on my Sk17i.It obviously failed so I gave up. (Using CWM) when I clicked reboot system, I was stuck at the Sony Ericsson logo . I tried to Go to the recovery mode or any other modes but they don't work. Can You DEV's Help me? also when I plug it in to my computer it doesn't charge for some reason. there is also no LED notification light, is it because of the failed Flash caused all these things to happen? Help!
Flash stock ftf Rom via flashtool.
And cm10 needs unlocked boot loader to flash it's custom kernel.
an0nym0us_ said:
Flash stock ftf Rom via flashtool.
And cm10 needs unlocked boot loader to flash it's custom kernel.
Click to expand...
Click to collapse
heres links - http://forum.xda-developers.com/showthread.php?t=1568792
Flashtool method
Download the correct firmware file for your phone at the bottom of the post.
Make sure Flashtool is installed.
Place downloaded firmware file(.ftf format) in Flashtool\firmwares(by default C:\Program Files\Flashtool) folder.
Start Flashtool.
Click the lightning button and choose Flashmode.
Firmware should appear there, if you have it in correct folder. Choose it.
Turn off your phone, connect USB cable to computer, then press Volume Down button and connect USB cable to your phone.
Flashtool should detect your phone and starts flashing. Follow the instructions.
When it says „Flashing completed“, unplug your phone and turn it on.
Click to expand...
Click to collapse
THe Problem is I can't do volume down combination. It still stucks at the logo
Uninstall everything on the PC related to your Phone then start from scratch.
Sent from Myushi
BrianXYap said:
THe Problem is I can't do volume down combination. It still stucks at the logo
Click to expand...
Click to collapse
What volume combination and stuck at the logo mean? You do flashing firmware via flashtool with device off.
It said connect USB cable and then power + vol - .I did it but nothing happened. It's still at the logo. I installed an official firmware once and a blue led indicator showed up. Now it doesn't .
Be sure that the phone is off then plug the usb cabl and hold volum down key in the same time and your in flash mod then open flashtool and see videos on youtube on how to flash ftf files using flashtool and that should be over
Sent from my SK17i using xda app-developers app
BrianXYap said:
It said connect USB cable and then power + vol - .I did it but nothing happened. It's still at the logo. I installed an official firmware once and a blue led indicator showed up. Now it doesn't .
Click to expand...
Click to collapse
do you really want a cm10 rom? then unlock your bootloader (but be mindful that you may lose your warrant and bad things might happen to your phone) here's the tut http://forum.xda-developers.com/showthread.php?t=1879750
after you unlock your bootloader
flash your kernel through flashtool
then install cm10 rom
but if you want to go back to your stock rom
you need flashtool and obviously your stock rom (ftf file)
click the lightning-like button then choose flashmode
select the rom then you'll be prompted to connect your phone
hold the power button and volume down button at the same time until the led light is blue.
wait to complete and your back to your original rom
i hope it helped you
please help!
i was flashing the official pacman rom for xperia u. then i connected my phone to the computer to fastboot the cm kernel.
but the flashtool says that drivers need to be installed. i have installed the drivers but the problem still persists.
i tried to goto the cwm but after i keep pressing the vol down button, the led flashes but nothing comes. its a black screen.
now i'm not able to do anything to the phone not even abble to flash stock ftf!
Please help!
vinayakagarwal1996 said:
please help!
i was flashing the official pacman rom for xperia u. then i connected my phone to the computer to fastboot the cm kernel.
but the flashtool says that drivers need to be installed. i have installed the drivers but the problem still persists.
i tried to goto the cwm but after i keep pressing the vol down button, the led flashes but nothing comes. its a black screen.
now i'm not able to do anything to the phone not even abble to flash stock ftf!
Please help!
Click to expand...
Click to collapse
Press volume up | power key untill you feel 3 vibrations then try to power up again.
EDIT: have you installed flash mode and fastboot drivers mode drivers too?
ChikeD said:
Press volume up | power key untill you feel 3 vibrations then try to power up again.
EDIT: have you installed flash mode and fastboot drivers mode drivers too?
Click to expand...
Click to collapse
Or remove the battery you may need to open pc device manager and manualy uninstall the drivers and make sure u manualy install the right ones
Sent from my Xperia U using xda app-developers app
ChikeD said:
Press volume up | power key untill you feel 3 vibrations then try to power up again.
EDIT: have you installed flash mode and fastboot drivers mode drivers too?
Click to expand...
Click to collapse
i tried but felt only 1 vibration which powered up the device and got stuck on kernel.
vinayakagarwal1996 said:
i tried but felt only 1 vibration which powered up the device and got stuck on kernel.
Click to expand...
Click to collapse
Wait untill you feel 3 vibrations.
What firmware you had when you installed the rom and can you give the link to the thread of the rom you installed?
Do you have ftf to original formware?
One vibration reboot, three power off.
After you will switch off, try flash tft then.
Sent from my Xperia Sola using xda app-developers app
ChikeD said:
Wait untill you feel 3 vibrations.
What firmware you had when you installed the rom and can you give the link to the thread of the rom you installed?
Do you have ftf to original formware?
Click to expand...
Click to collapse
Actually before that i was trying to port a rom but it didnt work out.
so i flashed the pacman rom http://forum.xda-developers.com/showthread.php?t=2372433
in this i had to fastboot the boot.img which i then was unable to.
and before that i had the same rom installed. i have the original ftf.
i instaled the latest flashtool. it says the drivers arent installed but they are.
windows says unable to install drivers.
after i press the vol up and power, after 1 vibration it goes to kernel. i waited for 5 min pressing the buttons but nothing happened.
when on kernel, flashtool says device connected in usb debugging off.
Thanks for your help!
in the flashtool, i chose the log level to debug.
then my phone was able to get to the fastbot mode and i successfully fastbooted the correct cm kernel and booted up the rom!
vinayakagarwal1996 said:
Actually before that i was trying to port a rom but it didnt work out.
so i flashed the pacman rom http://forum.xda-developers.com/showthread.php?t=2372433
in this i had to fastboot the boot.img which i then was unable to.
and before that i had the same rom installed. i have the original ftf.
i instaled the latest flashtool. it says the drivers arent installed but they are.
windows says unable to install drivers.
after i press the vol up and power, after 1 vibration it goes to kernel. i waited for 5 min pressing the buttons but nothing happened.
when on kernel, flashtool says device connected in usb debugging off.
Click to expand...
Click to collapse
Did you replace the kernel image before installing? Realy weird why the didn't fo it themselves.
No ppoint to try booting the phone.
You have removable battery so try to remove it for a minute, put it back and see if you can connect in flash mode and flash original formware.
BTW what do you mean by "goes to kernel?" recovery?
ChikeD said:
Did you replace the kernel image before installing? Realy weird why the didn't fo it themselves.
No ppoint to try booting the phone.
You have removable battery so try to remove it for a minute, put it back and see if you can connect in flash mode and flash original formware.
BTW what do you mean by "goes to kernel?" recovery?
Click to expand...
Click to collapse
sorry. i may be wrong. i meant the first image that comes when you boot like fxp logo/sony/samusung logo
btw i have fixed the problem as stated in my above post.
and i have now reflashed it.