someone pls help me my wifi is NOT turning on when i chek my wifi on its says ERROR and also my wifi mac address is not shown ,i am facing this problem after installing cwm recovery .my device is sony ericson live with walkman wt19i.
thank in advance........
flash
first backup all ur data and do a soft reset if not do a factory reset at last still not working flash original .ftf firmware files from flastool,,hit thanks if it helps u,,:good:
Flash rom
slogger001 said:
first backup all ur data and do a soft reset if not do a factory reset at last still not working flash original .ftf firmware files from flastool,,hit thanks if it helps u,,:good:
Click to expand...
Click to collapse
this is not a good idea to flash phone for such a this type of prob. i am facing same prob but not getting the right solution. I hope i will get soon.
hmmmm...
andronath said:
this is not a good idea to flash phone for such a this type of prob. i am facing same prob but not getting the right solution. I hope i will get soon.
Click to expand...
Click to collapse
look I'm saying that flashing is a last option if soft and hard reset work if u give ur phone to service center they will do this also ,but if u don't want to flash u can use Sony update service
abhisjekjsr2009 said:
someone pls help me my wifi is NOT turning on when i chek my wifi on its says ERROR and also my wifi mac address is not shown ,i am facing this problem after installing cwm recovery .my device is sony ericson live with walkman wt19i.
thank in advance........
Click to expand...
Click to collapse
andronath said:
this is not a good idea to flash phone for such a this type of prob. i am facing same prob but not getting the right solution. I hope i will get soon.
Click to expand...
Click to collapse
to you both:
what rom??
what kernel??
without this info we cant help u.
mostly ur problem is: wrong kernel OR on ics mosttimes: forget wifi modules for custom kernel...
wifi related problem
hey gys can anyone tell me how to fix this problem,
actually my wifi is not working and i want to flash a official rom(2.3.4 gb) but when ever i connect my mobile with usb in fast mode the flashtool give meesege that ur device is connect in fastboot mode but after 1 min. it's disconnect itself and says connect ur device .....so what to do for this ......
and i have already install adb &fastboot driver from flash tool>driver......
Rom and Kernel Version
bejunk said:
to you both:
what rom??
what kernel??
without this info we cant help u.
mostly ur problem is: wrong kernel OR on ics mosttimes: forget wifi modules for custom kernel...
Click to expand...
Click to collapse
Hi bejunk,
Mine phone is a chines mtk series and its rom is 4.2.2; kernel version is 3.4.5 ([email protected]#1)
abhisjekjsr2009 said:
hey gys can anyone tell me how to fix this problem,
actually my wifi is not working and i want to flash a official rom(2.3.4 gb) but when ever i connect my mobile with usb in fast mode the flashtool give meesege that ur device is connect in fastboot mode but after 1 min. it's disconnect itself and says connect ur device .....so what to do for this ......
and i have already install adb &fastboot driver from flash tool>driver......
Click to expand...
Click to collapse
do it like this: 1. prepare all stuff in flashtool (rom etc). UNTIL it says (shows) to connect ur phone. power off phone. now u need to connect it with FLASHMODE (green led lit) , NOT FASTBOOT MODE (blue led), to d so HOLD vol down PRESSED while connecting to pc. NOTE: on other phones models it canm be a other botton to press use google to find out, as example on a arc its the menu button.
andronath said:
Hi bejunk,
Mine phone is a chines mtk series and its rom is 4.2.2; kernel version is 3.4.5 ([email protected]#1)
Click to expand...
Click to collapse
uhhm, sry but now i cant help you :crying::crying:, but i really want.. the problem is i have no experience of this device, also i guess you installed a custom rom for ur device. at best 1st: check on your romthread/site if wifi is fixed there. secondly if no fix, post a message to the dev of your rom. like said cant help even if i want. may u need a specific kernel for your rom to get wifi work, so better check your rom thread. sry:crying:
2011 xperia device wifi issue
hey can i flash rom in flashmode if yes then pls tell me the full process.
thanks
abhisjekjsr2009 said:
hey can i flash rom in flashmode if yes then pls tell me the full process.
thanks
Click to expand...
Click to collapse
only stock rom. look on aneels honami rom thread for the link 'how to get back to stock ics'
abhisjekjsr2009 said:
someone pls help me my wifi is NOT turning on when i chek my wifi on its says ERROR and also my wifi mac address is not shown ,i am facing this problem after installing cwm recovery .my device is sony ericson live with walkman wt19i.
thank in advance........
Click to expand...
Click to collapse
try to change kernel or flash wifi modules
wifi problem
from where do i get wifi module pls give me the link.....
thanks
Related
Hi
After installing the 2.2.1 froyo_Achotjan ROM on my Sony Ericsson X10i, I am unable to use my Wifi. whenever I switch on wifi, it says "error"...
any solution to this? did I forget to install something, or did I install something wrong? I followed all the instructions in the guide...
thanks
dev tools
have u tried in menu > dev tools bad behavior> crash the system server???
wait for reboot and try it again
what baseband r u using?
tell us if that works 4 u
salu2
installing full
don't forget the steps 4 installation
install first the rom
REBOOOOOOOT
And after reboot install via recovery the fix
if u don't install the fix u wont have the wifi working
and if u install fix at the same session that u installed the rom u will lose the settings.apk
tell us how do u solve ur problem
sal2
I tried that...the bad behavior...it scans for networks, but refuses to pick up my router. then it automatically switches off my wifi. when I try again...I get "error". When I try to do bad behavior again, it doesn't work.
I installed this baseband: "Achotjan_v01.4_baseband_54/55/58_Full " from the guide
but in my phone, under baseband, it says "unknown" after installation
baseband
u installed a option of rom that use the 54-58 baseband
but before installing that rom u should check what baseband r u using...
and after that u could choose what version use...
wait
read this maybe could help u
http://forum.xda-developers.com/showpost.php?p=10879528&postcount=3
the rtf files that u cluod need u can find them here
http://forum.xda-developers.com/showthread.php?t=960527
i'm using the achotjan 2.2 1.4
with the baseband .58
flash u x10 with that baseband and maybe ur problem get solved
georgegon60 said:
don't forget the steps 4 installation
install first the rom
REBOOOOOOOT
And after reboot install via recovery the fix
if u don't install the fix u wont have the wifi working
and if u install fix at the same session that u installed the rom u will lose the settings.apk
tell us how do u solve ur problem
sal2
Click to expand...
Click to collapse
ok...i will try again...thank you
before
before do anything i RECOMEND U
flash ur phone with .58 baseband
achotjan says that his rom works better with .58
baseband works 4 all the wireless conectivity so wifi could be affected if are using diferent baseband
i'm using the .58 and my x10 works great with achotjan 2.2 vers 1.4
salu2
thank you...it is working...followed your above steps...
ur welcome
your welcome we are here 4 help us...
don't forget to thank achotjan 4 his wonderful rom
hi I had the same exact problem. so since i am already on 2.2.1 am I suppose to go back to 2.1 , i had 2.1.54, so how do I exactly downgrade it back?
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
i think you must reinstall firmware
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
did you flash a kernel when you installed the rom?
if yes then you must have flashed one for the wrong device, please chaeck otherwise flashing original firmware will make everything all right
So you think is software problem? Right?
ok i will flash a new kernel and other rom lets see what happend
Thanks
R10MaRiOo said:
So you think is software problem? Right?
ok i will flash a new kernel and other rom lets see what happend
Thanks
Click to expand...
Click to collapse
best way to check, flash original firmware!
this thread has ftf if you don't have it
http://forum.xda-developers.com/showthread.php?t=1568792
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
R10MaRiOo said:
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
Click to expand...
Click to collapse
installing a ftf is like reverting it to a stock stage, if your phone was working then, it should work now. are you sure you installed sk17 and not st17?
i cannot think of any other reason for this..
R10MaRiOo said:
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
Click to expand...
Click to collapse
Try flashing Stock firmware 5 to 6 times. I read somewhere that some times touch drivers are lost which can only be restored by flashing stock again and again
You can also refer this thread
OMG!! i flashed it six times and the screen doesnt work )=
Maybe if i install a rom from another model like mini or live with walkman
I thought that because whent the problem starts i change my build prop to make run a wt19 rom! with the boot_official_port_mango kernel, maybe my phone thinks its another phone xD
Well, you can always restore your phone with the Sony app and start again.
Anyway, I don't think its a good idea to try to use a ROM made for another device.
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
R10MaRiOo said:
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
Click to expand...
Click to collapse
On PC Companion, start the "Support Zone" and you can restore from here. I think Sony dont support SEUS anymore, but you can find it in some forums or download sites.
R10MaRiOo said:
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
Click to expand...
Click to collapse
here's SEUS
http://dl.dropbox.com/u/63607856/temp/Update_Service_Setup-2.11.7.13.exe
btw i am not sure that SEUS works with unlocked bootloaders, still no harm in trying.. good luck
Fix
Try the fix from here
It helps me.
Thanks Kobzar666
But its is a fix for st15
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
so i have to interchange i mean
-STEP 1: Install lastest firmware .62 for sk17i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (st15i)
-STEP 3: Then again flash lastest firmware .62 for st17i
someone can upload HYBROM v10
the files in the official post are private
Doesn't have to be Hybrom v10. It is a rare solution anyway...
Sent from my Xperia Live using xda premium.
so i can flash any rom just have to be be for st15??
Something like that happened to me with an X8 with unlocked bootloader and custom ROM.
Everything was fine for a month and then literally out of nowhere the phone s speaker stopped working! Just like that! No alarms,no ringing...nothing!
Before throwing away the phone,I gave it a shot and re flashed stock locked bootloader and ROM and everything started working again!
I then sold it and got a mini! :-D
N.
Sent from one of my 4 iPads.
I Fix It!!
Thanks for everyone who try to helps me, I fix it flashing it with wotan server, yes i have to buy a credit! But now everything works again
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
Try to reflash firmware via wotan client
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
bekris56 said:
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
Click to expand...
Click to collapse
Did you unlock bootloader on official way or via testpoint?
Flash the stockrom and see what happens...
I think that was via testpoint..i dont know for sure because one of my friends did it...i searched all similar posts but i cant use flashtool!it stuck on screen that says to plug in my phone!
bekris56 said:
I think that was via testpoint..i dont know for sure because one of my friends did it...i searched all similar posts but i cant use flashtool!it stuck on screen that says to plug in my phone!
Click to expand...
Click to collapse
So you install the latest flashtool version. Afterwards you download the gingerbread (or ics) ftf for your device. You install all drivers from flashtool installation folder> drivers. Now you launch flashtool, click on the flash, select flashmode and choose the ftf. Now turn phone off, hold volume up and while holding plug in pc. Don't turn phone on, just connect while holding volume down. Flashtool will automaticly flash the ftf.
Just restart and see what happens
bekris56 said:
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
Click to expand...
Click to collapse
flashing another device rom to ur made this problem..bcz when u do it the the touch drivers are replaced screwing ur touch screen digitizer...
try flashing hybrom v16 GB of sk17i and flash to stock lww rom after that....
is it still dont work u have to replace ur touchscreen digitizer.
mihahn said:
So you install the latest flashtool version. Afterwards you download the gingerbread (or ics) ftf for your device. You install all drivers from flashtool installation folder> drivers. Now you launch flashtool, click on the flash, select flashmode and choose the ftf. Now turn phone off, hold volume up and while holding plug in pc. Don't turn phone on, just connect while holding volume down. Flashtool will automaticly flash the ftf.
Just restart and see what happens
Click to expand...
Click to collapse
I did it....still the same problem...!
bekris56 said:
I did it....still the same problem...!
Click to expand...
Click to collapse
So you stuck there, on the latest flashtool build. Reinstall it and try again, it must work!
mihahn said:
So you stuck there, on the latest flashtool build. Reinstall it and try again, it must work!
Click to expand...
Click to collapse
You mean to flash 2 times the same ftf?
Oh so you mean you have installed stock firmware and touch isn't working anyway? There are some threads about how to fix touchscreen with hybrom (like sandy7 said)
Sent from my SK17i running Jelly Bean via CM10
sandy7 said:
flashing another device rom to ur made this problem..bcz when u do it the the touch drivers are replaced screwing ur touch screen digitizer...
try flashing hybrom v16 GB of sk17i and flash to stock lww rom after that....
is it still dont work u have to replace ur touchscreen digitizer.
Click to expand...
Click to collapse
if you have a link for hybrom v16 i would be thankfull to you!!and one more question,i must flash hybrom and let the phone boot?or no?
Hello, I have done the same with these two roms and I have the same problem. I can not operate the touchscreen phone. Please cant you help me?
Sorry for my english. I am Spanish.
LLoSER said:
Hello, I have done the same with these two roms and I have the same problem. I can not operate the touchscreen phone. Please cant you help me?
Sorry for my english. I am Spanish.
Click to expand...
Click to collapse
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
hit thanks if I've helped!
sent from my smultron
gouthamthemostwanted said:
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
hit thanks if I've helped!
sent from my smultron
Click to expand...
Click to collapse
Hi, first thanks for your help.
But I've done what I mentioned twice and the touch screen is still not working. Can you think of any other solution?. thanks
bekris56 said:
if you have a link for hybrom v16 i would be thankfull to you!!and one more question,i must flash hybrom and let the phone boot?or no?
Click to expand...
Click to collapse
search xda for the tut how to solve ur problem....
and hybrom link u can find it here http://forum.xda-developers.com/showthread.php?t=1879666
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
bekris56 said:
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
Click to expand...
Click to collapse
Hello, I have the same problem as you with the mini st15i. Could you tell me all the steps to make it work?
Thanks in advance.
need help with my wt19i
i have the same problem too :crying: last night i've flashed wrong cusrom (should have known it for mini pro) but mine is wt19i and the touchscreen was never responding ever since. I've tried so many ways in i.e :
http://forum.xda-developers.com/showthread.php?t=1856334
http://forum.xda-developers.com/showthread.php?t=1927058
http://forum.xda-developers.com/showthread.php?t=1779023
http://forum.xda-developers.com/showthread.php?t=1721331
none worked for me. Not even partially . Been tried using rage kernel 2.6, 2.7, X-kernel, KrSH kernel. Hybrom v10, v12 minipro, v12 lww. but it just can't boot seems like i'm desperate right now. Do i have to keep flashing again and again? bcause i see some comments about just tried to keep flashing to their devices and sometime it could magically turn the touchscreen to work
Hybrom v12
bekris56 said:
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
Click to expand...
Click to collapse
I searched for hybrom v12 mini pro for about half an hour, if you know the right method and link kindly reply me asap and with full instructions. I am also Lww user and facing same touch screen issue.
I will appreciate your concern.
Thanks.
Help me with this method
https://forum.xda-developers.com/xperia-mini/help/tp-firmware-config-file-to-fix-t3704805
Hi everybody, I'm Luis and this is my first post
I have a problem with my phone:
few days ago I installed this rom on my Xperia Mini Pro:
http://forum.xda-developers.com/showthread.php?t=2002376
After install the rom, the touch screen is not working anymore :crying:
I did some things to solve my problem but the touch screen doesn't work:
factory reset
restore with cwm
flash my XMP with flashtool using GB and ICS roms
reinstall the firmware with SEUS
but the touch screen is dead, the home and power buttons are working, the back and menu buttons are dead too.
my phone has a locked bootloader
Can somebody help me please?
PD: Sorry for my bad english :silly:
i have the same problem too man...
i'm still waiting any man can help us...
echo juned said:
i have the same problem too man...
i'm still waiting any man can help us...
Click to expand...
Click to collapse
Yes I know bro, there are more with the same problem for this FK rom
if u guys had made a backup in recovery before flashing u cud have restored it.
i assume u havent done so . therefore use flashtool to flash new firmware or simply try installing a new ROM and see if TS is working !
MoonBlade said:
if u guys had made a backup in recovery before flashing u cud have restored it.
i assume u havent done so . therefore use flashtool to flash new firmware or simply try installing a new ROM and see if TS is working !
Click to expand...
Click to collapse
I did, but the touch screen doesn't work. Another idea?
i dunno if this will help but see solutions in this thread...
http://forum.xda-developers.com/showthread.php?t=1721331
i tried rooting my xu ics 4.0.4 b.10 but as shown in pic it dint happen...wats d problem?? even in flashtool my device doesnt get identified automatically and i have to manualy select XU but when i do it it shows android version 2.3.4 eventhough i have ics
pls help...thnx in advance...
adyt5 said:
i tried rooting my xu ics 4.0.4 b.10 but as shown in pic it dint happen...wats d problem?? even in flashtool my device doesnt get identified automatically and i have to manualy select XU but when i do it it shows android version 2.3.4 eventhough i have ics
pls help...thnx in advance...
Click to expand...
Click to collapse
Is your USB debugging On.It can be found in developer's options...
akp.ajinkya said:
Is your USB debugging On.It can be found in developer's options...
Click to expand...
Click to collapse
yes usb debugging on,non-market apps install on....evrything perfct still it is happening like dis...
All the drivers installed for your phone?
Sent from my Jellybean Xperia S
Ben36 said:
All the drivers installed for your phone?
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
yupp....still like dis...(
adyt5 said:
i tried rooting my xu ics 4.0.4 b.10 but as shown in pic it dint happen...wats d problem?? even in flashtool my device doesnt get identified automatically and i have to manualy select XU but when i do it it shows android version 2.3.4 eventhough i have ics
pls help...thnx in advance...
Click to expand...
Click to collapse
From the pic it seems that there are more than one devices connected to your PC.Unplug all devices connected via USB and try to root again.
akp.ajinkya said:
From the pic it seems that there are more than one devices connected to your PC.Unplug all devices connected via USB and try to root again.
Click to expand...
Click to collapse
nope man id connected only my xu still coming like this...flashed many times still this persists...wat to do..??
adyt5 said:
nope man id connected only my xu still coming like this...flashed many times still this persists...wat to do..??
Click to expand...
Click to collapse
Reflash the ftf file to your phone,if the problem persists(i.e version is shown as 2.3.x)then flash a different ftf to your phone.
I think the error is occuring because version appears as 2.3.x may be due to some kernel issues.
akp.ajinkya said:
Reflash the ftf file to your phone,if the problem persists(i.e version is shown as 2.3.x)then flash a different ftf to your phone.
I think the error is occuring because version appears as 2.3.x may be due to some kernel issues.
Click to expand...
Click to collapse
i reflashed many times still it occurs like that...different ftf means wat?? shud i flash gb ftf??
adyt5 said:
i reflashed many times still it occurs like that...different ftf means wat?? shud i flash gb ftf??
Click to expand...
Click to collapse
Well i was saying to try ftf for a different region but yep you can try flashing GB ftf too,even i got a weird problem with my touchscreen,it wasn't working after a bad rom flash(not ftf),i tried flashing ICS rom,but it didn't regain functionality.So i placed my last bet on GB ftf and it did work and then i flashed back to ICS.Now its problem free.
So yes..try flashing gb firmware...switch on your phone...then flash ICS firmware and then try rooting.
Gud luck.
akp.ajinkya said:
Well i was saying to try ftf for a different region but yep you can try flashing GB ftf too,even i got a weird problem with my touchscreen,it wasn't working after a bad rom flash(not ftf),i tried flashing ICS rom,but it didn't regain functionality.So i placed my last bet on GB ftf and it did work and then i flashed back to ICS.Now its problem free.
So yes..try flashing gb firmware...switch on your phone...then flash ICS firmware and then try rooting.
Gud luck.
Click to expand...
Click to collapse
ok thnx a lot.. after trying will tell u...
akp.ajinkya said:
Well i was saying to try ftf for a different region but yep you can try flashing GB ftf too,even i got a weird problem with my touchscreen,it wasn't working after a bad rom flash(not ftf),i tried flashing ICS rom,but it didn't regain functionality.So i placed my last bet on GB ftf and it did work and then i flashed back to ICS.Now its problem free.
So yes..try flashing gb firmware...switch on your phone...then flash ICS firmware and then try rooting.
Gud luck.
Click to expand...
Click to collapse
hey i flashed gb world version even then flashtool wasnt identifying it n was showing 2.3.4 dn i flashed french ics even in dat one it dint show up...wat to do?? is there a solution or i shud go to sony service ccentre??
adyt5 said:
hey i flashed gb world version even then flashtool wasnt identifying it n was showing 2.3.4 dn i flashed french ics even in dat one it dint show up...wat to do?? is there a solution or i shud go to sony service ccentre??
Click to expand...
Click to collapse
Hmm...you going to service center and telling them that you are going to root...no,not gonna work.
Have you tried from another PC?
http://forum.xda-developers.com/showthread.php?t=2028139
try this method my friend
akp.ajinkya said:
Hmm...you going to service center and telling them that you are going to root...no,not gonna work.
Have you tried from another PC?
Click to expand...
Click to collapse
no ill tell them to install gb on my phone n at home ill upgrade thru pcc n dn root..
XrhstosDrouggos said:
http://forum.xda-developers.com/showthread.php?t=2028139
try this method my friend
Click to expand...
Click to collapse
tried to do this method but it doesnt workout...dnt knw wat to do...
thnks..
adyt5 said:
no ill tell them to install gb on my phone n at home ill upgrade thru pcc n dn root..
Click to expand...
Click to collapse
Give one last shot to PCC or SUS:flash GB ftf then upgrade it to ICS via PCC/SUS.
And have you tried from another PC?
alaaasss....rooted my xu... i flashed d stok kernel again n dn tried rooting with v15 binary n it worked..
hey how to verify that i ave installed cwm correctly n how to enter recovery mode for nandroid bakup??
i tried it( press volume up key when sony logo appers) but is not hapenning...
adyt5 said:
hey how to verify that i ave installed cwm correctly n how to enter recovery mode for nandroid bakup??
i tried it( press volume up key when sony logo appers) but is not hapenning...
Click to expand...
Click to collapse
Its vol down for cwm.
Sent from my ST27i