For some reason, the auto rotate function has stopped working. I'm rooted on a stock 4.4 Rom. The situation occurred after I was removing some bloat ware using titanium backup. I first assumed I must have dropped it, causing sine damage to one or more of the sensors. I've downloaded numerous sensor testing apps and checked *#0*#, and saw that all the sensors are working (or reporting they're working at least.). What can I do to get auto screen rotation working again, without having to use a third party app?
aimgrabber said:
For some reason, the auto rotate function has stopped working. I'm rooted on a stock 4.4 Rom. The situation occurred after I was removing some bloat ware using titanium backup. I first assumed I must have dropped it, causing sine damage to one or more of the sensors. I've downloaded numerous sensor testing apps and checked *#0*#, and saw that all the sensors are working (or reporting they're working at least.). What can I do to get auto screen rotation working again, without having to use a third party app?
Click to expand...
Click to collapse
Please show me your about phone...
Sent from my SM-N900P using Xparent BlueTapatalk 2
micmars said:
Please show me your about phone...
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OK...
aimgrabber said:
View attachment 2665432
Click to expand...
Click to collapse
Alright, you're rooted, running a stock kernel and everything is in alignment (baseband, ROM build number, &c).
Try factory resetting your device, and perhaps installing a stock DeOdex or Odex rom on the dev forum, and see if that doesn't get you back.
I appreciate you showing the screen, but it provides some info that many do not state in their initial post.
I assume you've checked all of the normal places in settings (i think there is a toggle in the pulldown menu for autorotae on/off)).
Good luck, definitely sucks.
micmars said:
Alright, you're rooted, running a stock kernel and everything is in alignment (baseband, ROM build number, &c).
Try factory resetting your device, and perhaps installing a stock DeOdex or Odex rom on the dev forum, and see if that doesn't get you back.
I appreciate you showing the screen, but it provides some info that many do not state in their initial post.
I assume you've checked all of the normal places in settings (i think there is a toggle in the pulldown menu for autorotae on/off)).
Good luck, definitely sucks.
Click to expand...
Click to collapse
I've done a factory reset, and the problem persists. I've made sure the screen rotate toggle is on, and in apps like YouTube where orientation is forced into landscape, if I turn the phone horizontal, the orientation will change. It seems like I just can't get the screen to change into landscape automatically.
So...
aimgrabber said:
I've done a factory reset, and the problem persists. I've made sure the screen rotate toggle is on, and in apps like YouTube where orientation is forced into landscape, if I turn the phone horizontal, the orientation will change. It seems like I just can't get the screen to change into landscape automatically.
Click to expand...
Click to collapse
So, it works in-app for YouTube when forced (say a video on an app when viewed from the play store), but not when in, say, the stock phone app? Please confirm same.
micmars said:
So, it works in-app for YouTube when forced (say a video on an app when viewed from the play store), but not when in, say, the stock phone app? Please confirm same.
Click to expand...
Click to collapse
I just tried the youtube app, When I put the phone in lanscape orientation, there is no change in the screen. If I tap the enlarge button for the youtube app, it will be forced into landscape mode. From there, when I put the phone back into portrait position, it will automatically change, as if the phone was working normally.
What about the Phone App
aimgrabber said:
I just tried the youtube app, When I put the phone in lanscape orientation, there is no change in the screen. If I tap the enlarge button for the youtube app, it will be forced into landscape mode. From there, when I put the phone back into portrait position, it will automatically change, as if the phone was working normally.
Click to expand...
Click to collapse
It would be helpful to know the details requested; namely, your phone app (stock phone, nothing else, not concerned with YouTube at the moment, as we can tackle that later).
Thanks!
WAIT i know your issue.....did you delete the samsung hub apk? write back i can fix your issue in 5 minutes no need to reset anything.
do this
1 extract libgnustl_shared.so from system>lib of your rom's zip.
2. Copy and paste to System>>lib and change permission to rw-r--r--
3. Reboot
dont ask me why but deleting hub deletes that lib. its need for auto rotation. i did the same thing.took me forever to figure that out .
kaos420 said:
WAIT i know your issue.....did you delete the samsung hub apk? write back i can fix your issue in 5 minutes no need to reset anything.
Click to expand...
Click to collapse
Crap, I actually did, pretty much right before the problem occurred.
aimgrabber said:
Crap, I actually did, pretty much right before the problem occurred.
Click to expand...
Click to collapse
yup see my reply to fix it. you know about permissions and how to extract right?
kaos420 said:
yup see my reply to fix it. you know about permissions and how to extract right?
Click to expand...
Click to collapse
Permissions I know, extracting not so much. Hate to ask for more help, but how does one do that?
aimgrabber said:
Permissions I know, extracting not so much. Hate to ask for more help, but how does one do that?
Click to expand...
Click to collapse
here
download that and move it over and change permissions reboot. then report back. match permissions of the other libs for reference.
kaos420 said:
here
download that and move it over and change permissions reboot. then report back. match permissions of the other libs for reference.
Click to expand...
Click to collapse
THANK YOU! This was driving me beyond crazy, and I was on the second step of requesting a replacement when you replied! You're awesome!
aimgrabber said:
THANK YOU! This was driving me beyond crazy, and I was on the second step of requesting a replacement when you replied! You're awesome!
Click to expand...
Click to collapse
No problem
happy it helped
Sent From My 0x1 Note 3.i love tep....
---------- Post added at 08:53 PM ---------- Previous post was at 08:48 PM ----------
@kennyglass123 can we get this marked as solved
Sent From My 0x1 Note 3.i love tep....
aimgrabber said:
THANK YOU! This was driving me beyond crazy, and I was on the second step of requesting a replacement when you replied! You're awesome!
Click to expand...
Click to collapse
Swweeeet same thing happened to me! Thanks for the help you guys
kaos420 said:
No problem
happy it helped
Sent From My 0x1 Note 3.i love tep....
---------- Post added at 08:53 PM ---------- Previous post was at 08:48 PM ----------
@kennyglass123 can we get this marked as solved
Sent From My 0x1 Note 3.i love tep....
Click to expand...
Click to collapse
Nicely done sir.
Sent from my SM-N900P using Xparent BlueTapatalk 2
micmars said:
Nicely done sir.
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
Sorry this is my first help post, do I need to do anything mark it as solved?
aimgrabber said:
Sorry this is my first help post, do I need to do anything mark it as solved?
Click to expand...
Click to collapse
Edit the first post select go advanced and add a (solved) to the front of title.
Sent From My 0x1 Note 3.i love tep....
kaos420 said:
WAIT i know your issue.....did you delete the samsung hub apk? write back i can fix your issue in 5 minutes no need to reset anything.
do this
1 extract libgnustl_shared.so from system>lib of your rom's zip.
2. Copy and paste to System>>lib and change permission to rw-r--r--
3. Reboot
dont ask me why but deleting hub deletes that lib. its need for auto rotation. i did the same thing.took me forever to figure that out .
Click to expand...
Click to collapse
Worked perfectly. Thanks. As a note, the file was missing on my phone. I had to download a copy from github.com. I used Root Browser app to to move from Download folder to System/lib folder, then long pressed on file to open menu where the permissions settings were located. Checking the appropriate boxes set permissions to rw-r--r-- combo.
Related
Hi guys,
Recently my S3, when charging, does not have its screen turned off. It was not the case when I got my phone but is happening the last few days.
Not sure what went wrong, but currently I am on XXALF6 + Siyah 1.2.6.
Any clues?
truewt said:
Hi guys,
Recently my S3, when charging, does not have its screen turned off. It was not the case when I got my phone but is happening the last few days.
Not sure what went wrong, but currently I am on XXALF6 + Siyah 1.2.6.
Any clues?
Click to expand...
Click to collapse
Check your screen time out?
Sent from my GT-I9300 using Tapatalk 2
barondebxl said:
Check your screen time out?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Set to 30 seconds, but it does not turn off only when charging.
Pretty sure something went wrong either through flashing the firmware/kernel :/
Had the same problem. Solved it by downloading "extended controls" and there is an option that keeps the screen on while charging...switch this off. Something must have triggered it but there is no option in the standard Galaxy menu to switch it off.
thanks man! how the hell did that setting turned up :/
I noticed this after updating my EC. It's on by default.
Fulaeetoy said:
I noticed this after updating my EC. It's on by default.
Click to expand...
Click to collapse
Bloody hell. ive been figuring out whats wrong. extended control is messing up SGS 3 settings.
fugato44 said:
Bloody hell. ive been figuring out whats wrong. extended control is messing up SGS 3 settings.
Click to expand...
Click to collapse
Hahaha same here, was pissed off the whole 3 says =p
Sent from my GT-I9300 using Tapatalk 2
The stock ICS at least has an option to keep the screen on during charging (Settings -> Developer options), maybe this option somehow got turned on? Samsung has, for some reason, decided to hide this option from the stock ROM, though, but maybe some apps (such as Extended Controls) still can enable it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can someone tell me where this option is in EC, I can't find it...
edit: nvm, it's a switch you have to add, I was looking for a program setting ^^
ninjafox said:
Can someone tell me where this option is in EC, I can't find it...
edit: nvm, it's a switch you have to add, I was looking for a program setting ^^
Click to expand...
Click to collapse
Correction: you have to add it as a toggle in the widget. Once the widget has been added to your homescreen, you can toggle it off.
cydiamante said:
Had the same problem. Solved it by downloading "extended controls" and there is an option that keeps the screen on while charging...switch this off. Something must have triggered it but there is no option in the standard Galaxy menu to switch it off.
Click to expand...
Click to collapse
Hey dude, thanks for this, I have referenced it in a post where I asked the same question. I hope people give you some thanks for this. I had already extended controls installed but never thought to use that toggle. Did you have the program installed before it happened, maybe there is something to do with the S3 and this tool that triggers it?
Syl
The screen on triggered when I tried to use a non original HDMI cable from Ebay.
screen stays on all the time
apologies in advance for being new and potentially asking something stupid! I have a similar problem, however my screen is staying on all the time - when not charging.
I have set screen timeout to 30 seconds and tested with the smart stay setting both on and off. I am running the stock 4.04 ICS rom:
Baseband version - I9300BULG2
restarting the phone doesnt appear to help (it did once, but after a while it was back to staying awake.). Currently the smart stay option is on, but I noticed that the little eye icon that normally pops up to check if you are looking at phone never appears, so I am assuming the phone "thinks" its being actively used.
In an attempt to try to fix problem, I removed all widgets from the home screens but that does not appear to have helped. Wondered if anyone else had this problem?
ch00w00 said:
apologies in advance for being new and potentially asking something stupid! I have a similar problem, however my screen is staying on all the time - when not charging.
I have set screen timeout to 30 seconds and tested with the smart stay setting both on and off. I am running the stock 4.04 ICS rom:
Baseband version - I9300BULG2
restarting the phone doesnt appear to help (it did once, but after a while it was back to staying awake.). Currently the smart stay option is on, but I noticed that the little eye icon that normally pops up to check if you are looking at phone never appears, so I am assuming the phone "thinks" its being actively used.
In an attempt to try to fix problem, I removed all widgets from the home screens but that does not appear to have helped. Wondered if anyone else had this problem?
Click to expand...
Click to collapse
Dude, i believe there is a setting that you can find in extended controls, irs called "Screen Always on" install extended controls from play store and create a widget to disable this and you should be sorted.
Sent from my GT-I9300 using XDA Premium HD app
---------- Post added at 01:27 PM ---------- Previous post was at 01:26 PM ----------
ch00w00 said:
apologies in advance for being new and potentially asking something stupid! I have a similar problem, however my screen is staying on all the time - when not charging.
I have set screen timeout to 30 seconds and tested with the smart stay setting both on and off. I am running the stock 4.04 ICS rom:
Baseband version - I9300BULG2
restarting the phone doesnt appear to help (it did once, but after a while it was back to staying awake.). Currently the smart stay option is on, but I noticed that the little eye icon that normally pops up to check if you are looking at phone never appears, so I am assuming the phone "thinks" its being actively used.
In an attempt to try to fix problem, I removed all widgets from the home screens but that does not appear to have helped. Wondered if anyone else had this problem?
Click to expand...
Click to collapse
Let me know if this helps you out.
Sent from my GT-I9300 using XDA Premium HD app
SyLvEsTeR20007 said:
Dude, i believe there is a setting that you can find in extended controls, irs called "Screen Always on" install extended controls from play store and create a widget to disable this and you should be sorted.
Sent from my GT-I9300 using XDA Premium HD app
---------- Post added at 01:27 PM ---------- Previous post was at 01:26 PM ----------
Let me know if this helps you out.
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
Ah, I thought from previous comments that this might only fix if the problem only occurred when the phone was charging. I will go give it a try now. thanks
ch00w00 said:
Ah, I thought from previous comments that this might only fix if the problem only occurred when the phone was charging. I will go give it a try now. thanks
Click to expand...
Click to collapse
The answer for the previous question also applies as there is a different widget toggle for that one too.
Sent from my GT-I9300 using XDA Premium HD app
---------- Post added at 02:38 PM ---------- Previous post was at 02:38 PM ----------
ch00w00 said:
Ah, I thought from previous comments that this might only fix if the problem only occurred when the phone was charging. I will go give it a try now. thanks
Click to expand...
Click to collapse
Let me know pleasr buddy
Sent from my GT-I9300 using XDA Premium HD app
I am new here, and currently having the same problem most others are -- the screen lighting up like a Citi Field night game once fully charged.
I just bought Extended Controls. I see a widget with a brightness button, I selected it, but have no idea how to program it so that my phone doesn't light up in the middle of the night once charging is complete.
Can some kindly provide some instructions on how to program the widget?
Thanks
NJRonbo said:
I am new here, and currently having the same problem most others are -- the screen lighting up like a Citi Field night game once fully charged.
I just bought Extended Controls. I see a widget with a brightness button, I selected it, but have no idea how to program it so that my phone doesn't light up in the middle of the night once charging is complete.
Can some kindly provide some instructions on how to program the widget?
Thanks
Click to expand...
Click to collapse
Dude, read this thread, the answer is there. Basicly, add a toggle called "stay awake" and you should notice that its got a green line under it. Press the toggle to turn it off and your good to go.
Sent from my GT-I9300 using XDA Premium HD app
SyLvEsTeR20007 said:
The answer for the previous question also applies as there is a different widget toggle for that one too.
Sent from my GT-I9300 using XDA Premium HD app
---------- Post added at 02:38 PM ---------- Previous post was at 02:38 PM ----------
Let me know pleasr buddy
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
thanks for your help. I installed the widget and the "Screen Always On" wasnt enabled... however I have since found the problem. I noticed the phone was getting pretty hot when apparently idle, so figured something was constantly running even though it didnt seem to be, The culprit was a samsung app which I installed, tested (thought was a bit pointless), then forgot about. It was called "Drivelink" anddownloaded from samsung app store. I wont make that mistake again!
thanks for your help though... That app looks pretty useful so happy to have been pointed in it's direction!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I need someone to be my guinea pig and give this build a try. I no longer have the device but think this great device deserves this great ROM.
Your warrenty is now void blah blah. You know the deal. Please hit me with some feedback on bugs. Thanks
Download link: http://d-h.st/u2g
Rev. 2 http://d-h.st/mId
Not sure if this will fix dpi issue. I dont have a hdpi.conf file that doesn't have a nav bar. Might need to make one if this doesn't work.
Rev. 3 http://d-h.st/qI6
A attempt to get hardware button layout straightened out. DPI issue unresolved. Use Hybrid settings.
Rev. 4 http://d-h.st/iqW
Possible dpi fix.
Rev. 4 http://d-h.st/rzS
Finally figured out what the real dpi is. Should be allset. check gps to see if recent cm sources fixed issue.
Rev. 5 http://d-h.st/8xn
2.9.5 updates.
Gapps http://goo.im/devs/daxmax/xylon/gapps
RBMacGregor said:
I need someone to be my guinea pig and give this build a try. I no longer have the device but think this great device deserves this great ROM.
Your warrenty is now void blah blah. You know the deal. Please hit me with some feedback on bugs. Thanks
Download link: http://d-h.st/u2g
Gapps http://goo.im/devs/daxmax/xylon/gapps
Click to expand...
Click to collapse
I'm downloading now, will throw you some feedback after I have it installed
EDIT: Ok here's my review, first thing off the bat I noticed was the screen size was too big, tried setting the DPI value in build.prop and reboot but it stayed the same. Everything else seemed to run really smooth otherwise, if you can change the DPI to the s2 default I think this rom would then be superb I also wouldn't mind helping you troubleshoot, I'm not a noob to this sort of stuff, so just let me know, I restored my backup but I also have a backup of this rom too...
Im more than willing to help test.I recently gave up a much more "powerful" and well known newer device in favor of a new i777.I am at your disposal
Sent from my SGH-I777 using xda app-developers app
goldeneagle1972 said:
I'm downloading now, will throw you some feedback after I have it installed
EDIT: Ok here's my review, first thing off the bat I noticed was the screen size was too big, tried setting the DPI value in build.prop and reboot but it stayed the same. Everything else seemed to run really smooth otherwise, if you can change the DPI to the s2 default I think this rom would then be superb I also wouldn't mind helping you troubleshoot, I'm not a noob to this sort of stuff, so just let me know, I restored my backup but I also have a backup of this rom too...
Click to expand...
Click to collapse
Great thanks guys. Im gonna get some time tomorrow and we can dive in and get this puppy working well.
bob24260 said:
Im more than willing to help test.I recently gave up a much more "powerful" and well known newer device in favor of a new i777.I am at your disposal
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help. I think I found the deep and will try and get another build up tomorrow.
RBMacGregor said:
Thanks for the help. I think I found the deep and will try and get another build up tomorrow.
Click to expand...
Click to collapse
Cool, I'll be looking for it to test for ya
goldeneagle1972 said:
Cool, I'll be looking for it to test for ya
Click to expand...
Click to collapse
Alrighty guys I have another attempt in o.p. Let me know how it goes.
Got this up and running right now and it works great, no force closes or bugs . Can make calls and use Wi-Fi. One thing though when it first boots up you need to go to the hybrid setting and change the dpi and your set. Also one thing, you cannot press and hold the capacitive keys for different commands they can only be.set for one touch action and there is no option in the setting to add the search key so it's basically blank. I'll post a screen shot after I test it out more.
Here you go
alexisprz said:
Got this up and running right now and it works great, no force closes or bugs . Can make calls and use Wi-Fi. One thing though when it first boots up you need to go to the hybrid setting and change the dpi and your set. Also one thing, you cannot press and hold the capacitive keys for different commands they can only be.set for one touch action and there is no option in the setting to add the search key so it's basically blank. I'll post a screen shot after I test it out more.
Click to expand...
Click to collapse
Thanks for getting back to me. The new repository has a whole new way of dealing with hardware keys Im still working it out. Were any of them set to anything at first boot? Also I tried to set the dpi to 213 I take it that didn't stick? Do you remember what it was at before you changed it?
Edited for content
alexisprz said:
Got this up and running right now and it works great, no force closes or bugs . Can make calls and use Wi-Fi. One thing though when it first boots up you need to go to the hybrid setting and change the dpi and your set. Also one thing, you cannot press and hold the capacitive keys for different commands they can only be.set for one touch action and there is no option in the setting to add the search key so it's basically blank. I'll post a screen shot after I test it out more.
Click to expand...
Click to collapse
http://d-h.st/qI6 Tried setting hardware soft keys correctly.
The capacitive keys were as follows menu was set as menu, home to home, back to back, and search key is blank but does vibrate when touch. In then setting for the keys I can change the normal key presses but you cannot set the long press key options since they wont work.
The DPI was set to 360 for system and apps, all I did was enable the hybrid mode, rebooted, changed DPI to 213 system and 215 apps and made sure to change the ui mode to phone. It can change to phablet and tablet modes as well. The only issue I have is the search key , and long presses that don't work yet.
This rom so far is awesome and runs smoothly, also battery drain is non existing, though I do have a extended battery, but thanks and let me know if you need more info.
You have a new beta tester! I'll get some screenies for you soon.
Edit:
Initial DPI needs to be lowered. I think it's defaulting to around 350. Should be the low 200's.
Is there a reason Play Store isn't included?
Also, and you may know this, GPS is broken due to upstream CM changes. Might want to note that in OP as this is a feature a lot of people rely on. Maps seems to work, but other apps that use location can't get a lock.
RBMacGregor said:
http://d-h.st/qI6 Tried setting hardware soft keys correctly.
Click to expand...
Click to collapse
The keys now work, I can set all of them including the search key and long pressing works as well.
RBMacGregor said:
Thanks for getting back to me. The new repository has a whole new way of dealing with hardware keys Im still working it out. Were any of them set to anything at first boot? Also I tried to set the dpi to 213 I take it that didn't stick? Do you remember what it was at before you changed it?
Click to expand...
Click to collapse
When I tested first release build.prop said it was at 180...
EDIT: Gonna test new build, will respond back shortly...
EDIT 2: Ok you guys may have noticed that the Play Store displays too big when you load it up, to fix that just go to DPI Groups in Hybrid Properties, then add Google Play Store to the 213 DPI Group and that will fix it, I've also got my system DPI screen size fixed This rom is shaping up to be pretty good, nice job RBMacgregor
IconRunner said:
You have a new beta tester! I'll get some screenies for you soon.
Edit:
Initial DPI needs to be lowered. I think it's defaulting to around 350. Should be the low 200's.
Is there a reason Play Store isn't included?
Also, and you may know this, GPS is broken due to upstream CM changes. Might want to note that in OP as this is a feature a lot of people rely on. Maps seems to work, but other apps that use location can't get a lock.
Click to expand...
Click to collapse
If the play store is not included its to keep the peace with google. They have done a lot for us and doing what they ask is the least we can do. It was in there at one point but may be pulled. As for the gps I was not aware its broken. I'm not too familiar with this device I'm just trying to get this build straightened out for my girlfriend who has the phone. Do you know what the deal is with gps? Is there a fix available or a commit I can revert?
alexisprz said:
The keys now work, I can set all of them including the search key and long pressing works as well.
Click to expand...
Click to collapse
Great that's what I was hoping you would say.
goldeneagle1972 said:
When I tested first release build.prop said it was at 180...
EDIT: Gonna test new build, will respond back shortly...
EDIT 2: Ok you guys may have noticed that the Play Store displays too big when you load it up, to fix that just go to DPI Groups in Hybrid Properties, then add Google Play Store to the 213 DPI Group and that will fix it, I've also got my system DPI screen size fixed This rom is shaping up to be pretty good, nice job RBMacgregor
Click to expand...
Click to collapse
What was the dpi set at in later builds? I dont have a file I need for hdpi no navigation devices but It must have worked or been in the old repo at one point. Im gonna try and dig into it and see what I can find. Other than stock dpi and gps everything else is hunky dory? system dpi should be 213
Ok. I don't think this will do it but I need someone to install this and tell me if there is a nav bar along with hardware soft buttons. http://d-h.st/iqW
p.s. well done guys thanks for the help.
“On the fly battery mod”
http://forum.xda-developers.com/showthread.php?t=2141193
Stand alone Battery bar w/ options
http://forum.xda-developers.com/showthread.php?t=2294344
Clock status bar mod
http://forum.xda-developers.com/showthread.php?t=2109973
Custom Settings Tab
http://forum.xda-developers.com/showthread.php?t=2166315
AOSP Lockscreen
http://forum.xda-developers.com/showthread.php?t=2372721
Real time Status bar Transparency
http://forum.xda-developers.com/showthread.php?t=2215199
Screw IT! Just go to his page! Thank you DIDACT
http://forum.xda-developers.com/search.php?searchid=252792121
ALL other TUTORIALS
http://forum.xda-developers.com/showthread.php?t=2488033 Thanks ficeto!
http://forum.xda-developers.com/showthread.php?t=2548857
http://forum.xda-developers.com/showthread.php?t=2493701
http://forum.xda-developers.com/showthread.php?t=2576153
http://forum.xda-developers.com/showthread.php?t=2193735
http://forum.xda-developers.com/showthread.php?t=2011503
http://forum.xda-developers.com/showthread.php?t=2029902
http://forum.xda-developers.com/showthread.php?t=2562788
http://forum.xda-developers.com/showthread.php?t=2279039
http://forum.xda-developers.com/showthread.php?t=2449815
http://forum.xda-developers.com/showthread.php?t=2409951
http://forum.xda-developers.com/showthread.php?t=2254022
http://forum.xda-developers.com/showthread.php?t=2331236
http://forum.xda-developers.com/showthread.php?t=2514703
http://forum.xda-developers.com/showthread.php?t=2175891
http://forum.xda-developers.com/showthread.php?t=2472009
http://forum.xda-developers.com/showthread.php?t=2038675
http://forum.xda-developers.com/showthread.php?t=2075885
http://forum.xda-developers.com/showthread.php?t=1573032
http://forum.xda-developers.com/showthread.php?t=2073370
http://forum.xda-developers.com/showthread.php?t=2120008
http://forum.xda-developers.com/showthread.php?t=1599758
http://forum.xda-developers.com/showthread.php?t=2594659
http://forum.xda-developers.com/showthread.php?t=2544381
My permission for N3 features..
http://forum.xda-developers.com/showthread.php?t=2565674
Our first ROM with Rom Control ALREADY introduced!
http://forum.xda-developers.com/showthread.php?t=2392332
I want this thread to be a General Q&A for N3BULA. All questions can be asked here about this rom. Please feel free to ask anything here and leave the main thread for development and fixes. I and Deck will be in here as much as possible to help but we do expect people to help each other as well. I will also update this page with fixes listed in the OP! Thanks guys for your support and ENJOY!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Initial SetUp
Make sure you have rom on extsdcard! In recovery wipe everything, data, system, cache, delvik, factory reset, then FORMAT DATA...
I have flashed this 6 times with wiping everything except formating data and No Air Cmd.. 3 times in a row with formating data and all 3 WITH Air cmd.
If your loading up the rom for the first time and your sitting at the verizon screen....it will be a while, you have to think about it like this
-VM is being built for the first time
-The rom just got ODEXED so it has to build the data cache as well
Honestly first boot after the install takes about 8-9 minutes. Best way to tell your phone is still on the right track, if your on the verizon screen, and your LED is lit up blue it is still building everything for initial boot. Once the BLUE led light goes out, you will be booting into system momentarily at the welcome screen. Please be patient
If your having trouble with air command, BEFORE YOU EVEN DO ANYTHING OR TOUCH ANYTHING. goto settings after the setup WITH THE S PEN STILL IN THE PHONE. click menu, switch to tabbed view, goto controls, turn on air view and air command, and THEN pull out the pen and test it. DO NOT CHANGE ANY OTHER SETTINGS OR ENABLE AIR COMMAND ON THE STANDARD SETTINGS VIEW UNTIL YOU HAVE GONE TO TABBED VIEW AND TURNED THEM ON WITH THE PEN STILL IN THE HOLSTER FROM BOOT UP. Thank you for reading
Reporting a bug/fc..
So here is what I need in order to help. Download a logcat application from the market. Do what you have to in order to reproduce the issue. Load the logcat to either pastebin or drop box and paste the link. We cannot fix issues based on pictures (unless theme related). We also need the following information.
-Clean or dirty install?
-Recovery used?
-Stock app?
-Reproducible?
-Frequency?
We will be updating the OP of both the Rom thread and this Q&A thread with this information. Without this information we are shooting blind and it slows down the troubleshooting process. This should be a prerequisite for any bug report
Why doesn't Wifi work or in setup it just sits there?
Before installing this rom you MUST FLASH THE MJ9 OTA firmware released by beans for ODIN ONLY.
This will ensure proper functionality of your phone and this ROM. This rom requires an updated pit, TZ, Hidden, params and modem to function the way it was meant to.
The only way to get these updated is via odin flash.
Also well before flashing this rom, please remove all files you would like to keep a copy of from internal storage.
Switching to 4.3 from 4.1.2 changes quite a bit, including the location of the internal SD cards memoryblock.
You will need to wipe Internal SD
Why isn't GPS working?
You need to flash MinorFixV1.zip in top header, under Downloads. Sorry it was a bug we didn't catch believe it or not..HAHA
Why doesn't Air Command work?
A few things you need to try..Did you guys wipe data and internal sd? Then make sure you go into settings>menu key>select tab view>Controls>turn ON Air Command. Still not working? Turn everything off in on the spen page as well as air command and air view....reboot and renable if it doesnt work.. Boot into recovery and dont wipe. Install the rom, in aroma chose to wipe data.
Where is Xposed?
Settings>Menu>Switch to tab view> Device Tab > Custom Apps
For those of you who Have a Galaxy Gear and want to sync weather!
Unfortunately I haven't figure out what the interaction is between the widget and the gear. The only way to have weather update on your gear is to use the Note 2 weather widget...not the Note 3. So I will be posting a flashable zip momentarily that will move you to the note 2 4.3 widget and clear the data for the app.
Download the Weather Widget for gear fix from the DevDB Downloads tab!
For those of you that want to use S Health! And want to use it with their Gear!
YOU CANNOT HAVE THE INCLUDED XPOSED MULTIWINDOW MANAGER TURNED ON OTHERWISE S HEALTH WILL CRASH
Now the bigger question, we all want custom apps in multiwindow, best way is to either use gravity box, OR set the apps you want then disable the module.
Now then...I've included the Basic Launch APK of S Health from the note 3 with the rom....however?!? You all want the new update and features so download this and install as a regular APK!
Download by clicking Downloads on the DEVDB Tab, S health apk
Once this is installed you'll have all 3 widgets, as well the pedometer should work. And it will sync with your galaxy gear. Just remember - Multiwindow managers are a no no!
Where is Note 3 Walls?
Here..
Why doesn't Air Gestures>Finger Air View>Signature Unlock work?
These are things that will never work. Air Gestures not going to happen.. Finger Air View no sensor.. Signature Unlock..really? Would you really use it? Or is it just cool to do once
Where is page buddy?
Page buddy is removed in the 4.3 note 3 launcher, page buddy service is changed.
Galaxy Gear not sending pictures over to the N2?
Change the amount of times it autosyncs the photos a day through gear manager. It auto syncs on first connect...then stock is once a day...you can also share your photos through the gallery by clicking on a photo on the gear.
Why isn't Xposed themes not working?
Xposed...zip themes wont work. We basically did this because we want to protect what we spent SO MUCH TIME creating. So the ROM was reOdexed upon creating. Sorry..
This damn Rom keeps telling me my internet connection is unstable and shows me a voicemail icon!
his seems to be with all OTA roms. Easy to get rid of the notification. Goto Wifi settings hit menu, click advanced, turn off wifi notifications
S Translator not recognizing voice?
DL this thanks @turbo50t
Where do you get the MJ9 OTA firmware released by beans for ODIN ONLY and a guide on how to install it?
Click Here and here is Beans Official Thread for instructions on "how to ODIN FLASH" please use the Search tab on XDA.
Can I change the overall dpi of this rom?
Yes you can to a certain point. You can install Xposed Module: App Settings..There is also a thread HERE where @Pafcholini has modded some apps.. PLEASE make sure you back up whatever you change..and REMEMBER some apps may not work for you..
Click to expand...
Click to collapse
reserved
hey L8
i got a question.
I was trying to use the mobile printing using the gallery and the samsung stock browser and got this error message and print just hangs in the notification. I was able to find my printer ok after connecting to my home wifi network.
Does mobile print work with this rom? im not sure if it is just me.
monkeyass408 said:
hey L8
i got a question.
I was trying to use the mobile printing using the gallery and the samsung stock browser and got this error message and print just hangs in the notification. I was able to find my printer ok after connecting to my home wifi network.
Does mobile print work with this rom? im not sure if it is just me.
Click to expand...
Click to collapse
I personally have not tried it. I am currently without my phone until the end or the beggining of next week. If you could pull a log that would help out a lot so we can see what is going on. Thank you!
monkeyass408 said:
hey L8
i got a question.
I was trying to use the mobile printing using the gallery and the samsung stock browser and got this error message and print just hangs in the notification. I was able to find my printer ok after connecting to my home wifi network.
Does mobile print work with this rom? im not sure if it is just me.
Click to expand...
Click to collapse
The reason this may not work is because the browser is not stock. Its S Browser from note 3. I have no way to confirm this is the reason its not working due to not having a printer...lol
lacoursiere18 said:
I personally have not tried it. I am currently without my phone until the end or the beggining of next week. If you could pull a log that would help out a lot so we can see what is going on. Thank you!
Click to expand...
Click to collapse
Deckoz2302 said:
The reason this may not work is because the browser is not stock. Its S Browser from note 3. I have no way to confirm this is the reason its not working due to not having a printer...lol
Click to expand...
Click to collapse
here is the logcat. sorry it took a while was afk.
let me know if i pulled it right. first time lol
update: even though the from the browser and the gallery i was able to scan for the correct printer when connected through wifi i dont think samsung has the drivers for my printer. I tried printershare app in the playstore and it printed with a generic printer driver. (didnt have the exact brother printer driver)
lol just learned how to use google cloud print. So easy =). Ditching samsung print
lacoursiere18 said:
I want this thread to be a General Q&A for N3BULA. All questions can be asked here about this rom. Please feel free to ask anything here and leave the main thread for development and fixes. I and Deck will be in here as much as possible to help but we do expect people to help each other as well. I will also update this page with fixes listed in the OP! Thanks guys for your support and ENJOY!
Click to expand...
Click to collapse
Thanks for this. Since I'm new to xda I could not comment on op. Everything about this rom is awesome. Even with the small bugs this still is one of the best TW 4.3 roms out there. Keep up the good work guys.
Great Rom!!
Hey! I love this rom. The only thing i'm missing is the quick controls in the stock browser. Is there a way I can get that feature back?
Droid187 said:
Hey! I love this rom. The only thing i'm missing is the quick controls in the stock browser. Is there a way I can get that feature back?
Click to expand...
Click to collapse
you can move back to the note 2 browser if you would like. But you will loose smart scroll(if that even matters to you lol)
GPS is working
I got the gps to lock right after the update!!!! Thanks for all the hard work.
Deck and l18 you guys truly made a awesome rom. I have no reason to get the note 3 now!! Just time to wait for the note 4.
Deck and L18, just wanna say you guys rock:thumbup: After following your instructions and a few dirty flashes and the latest fix, Everything works flawlessly!
I bought my Note 2 a few weeks before the Note3 came out and now I get the best of both worlds
Thanks again for the many hours and hard work you and your other dev. helpers have put into making this awesome Rom happen!!!
Sent from my SCH-I605 using xda app-developers app
Hey thanks for the awesome rom guys!! Loving it so far!!
Question.. Is there a way to turn off usb debugging? I need it off in order for my time Warner app to work. Thanks in advance!
Thumprxl said:
Hey thanks for the awesome rom guys!! Loving it so far!!
Question.. Is there a way to turn off usb debugging? I need it off in order for my time Warner app to work. Thanks in advance!
Click to expand...
Click to collapse
settings > about phone > click build number 7 times. back up, goto developer options, disable usb debugging
Deckoz2302 said:
settings > about phone > click build number 7 times. back up, goto developer options, disable usb debugging
Click to expand...
Click to collapse
Thanks for the quick response... You guys rock!!
4.1.2 to 4.4.2 to 4.3
I went from 4.12 to CM11 4.4.2 do I have to Odin back to 4.1.2 to flash this rom. BY the way I used casual to unlock bootloader initially.
How do we get rid of the snote pop up on the double tap home screen? Bc I have both action memo and snote.
Sent from my SM-N900V using xda app-developers app
05Warrior said:
How do we get rid of the snote pop up on the double tap home screen? Bc I have both action memo and snote.
Sent from my SM-N900V using xda app-developers app
Click to expand...
Click to collapse
goto lockscreen settings
I didn't see the option in lockscreen to get rid of the snote pop up. It's when I double tap the home screen after unlocking the phone.
Sent from my SM-N900V using xda app-developers app
I didn't skip settings and had the n3 features and now they are gone. Any idea on how to get them back?
Sent from my SCH-I605 using xda app-developers app
Need some help
1)
anyone of you guys notice that in /storage there are two files "0" and "legacy" that is pretty much the exact identical version of the /storage/sdcard0
i had this same issue with skynote before too. I could have sworn that i wiped my internal storage before flashing this rom too but the file system is out of whacked. I dont get it.
Please let me know if you guys are having the same thing or not. Thanks
Update: must have done something wrong with wiping internal storage during flashing. Gonna Do a fresh flash.
2)
i always get the android is updating "nebula is updating" message when i boot up the phone. (maybe because i messed with a system app or wipe dalvic cache)
i get so frustrated when this happens...
anyone know how to stop that message at boot going on every time i reboot?
i really dont want to reflash nebula rom =(
Update: going to fresh flash again cause i looked and looked. Next time i mess with system apps im gonna nandroid a clean good copy. Ahh the hours of person settings touch down the drain ;:head palm:;
3) update
well this one i found out wanam does. remaps the double click home botton to any app i want =) and can disable wake home when screen is off. Found out that wanam doesnt replace the my magazine with double tap home. Depending on the speed of the double home tap I still get my magazines lol
(i was trying to get the xposed additions pro version to work so i played with system app and replacing it with the pro because the pro version app on the market doesnt replace the xposed additions in system apps/ update the module- lead to problem number 2 lol)
Scratch what I said above... wanam did remap my double tap home button to any app to want but I found out that pressing home on you home page brings up my magazimes. Grr... this stinks lol.
update 2:
im so stupid. in my magazine when you go to settings there is an option to disable pressing the home key to open my magazines lol!!!
thanks
well i think i just answered all my questions myself hahaha thanks for nothing guys!!! jk. Hope this helps someone.
Seeing as how I hate waiting for Carriers to release updates to system ROM for features that others have before us, I present to all users, ways to get around the wait and get to the features, removing the waiting. Power to the Users!
Click to expand...
Click to collapse
This is in beta testing of Wifi Calling, the link below is for beta test 1.0, please report issues and whatnot
Disclaimer:
Click to expand...
Click to collapse
You accept all responsibility for your device. Do not whine about explosions, gaining self-awareness, stupidity. Always do backup before any and all MODs. Be smart and flash on.
Changelog:
Click to expand...
Click to collapse
EDIT 5/29: Initial Release of beta to public, beta 1.0
Downloads:
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23501681358539735 - WifiCalling b1.0
http://www.androidfilehost.com/?fid=23501681358539806 - WifiCalling b1.1
Yes sir, good deal bro. Will check it out.
Nice work. As always
Sent from my SM-G900P using Tapatalk
Will this mod interfere with hotspot/DL booster?!
Joe0113 said:
Will this mod interfere with hotspot/DL booster?!
Click to expand...
Click to collapse
It shouldn't, no files overlap in mod yet. If it works, profit and I'll release stable. If not, I'll work.
Tried but constant fc wiped cache dalvic reboot etc but still just fc
So exactly how do u enable this? Is there an on off toggle?
Sent from my SM-G900P using XDA Premium 4 mobile app
Use quick tile mod I posted in general. To activate, use sqlite editor. Go to setting storage -> settings.db -> search "vo" in global/system (whichever). One of those should pop up vowifi or something. Set it to 1 I believe and should walk through activation process when click again. If not, I'll keep up files in next beta
OP Updated, try beta 1.1
RevelationOmega said:
Use quick tile mod I posted in general. To activate, use sqlite editor. Go to setting storage -> settings.db -> search "vo" in global/system (whichever). One of those should pop up vowifi or something. Set it to 1 I believe and should walk through activation process when click again. If not, I'll keep up files in next beta
OP Updated, try beta 1.1
Click to expand...
Click to collapse
Went to settings.db then system and searched "vo" and vowifi or anything like that did not pop up. Flashed the mod but have no way of testing it! :/
Also I have the WifiCalling quicksetting toggle but it takes me to DL Booster lol...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from a Galaxy 5 light years away
I found it I think!! You need to search in "global" for it show up!
Sent from a Galaxy 5 light years away
Got it
Sent from a Galaxy 5 light years away
Joe0113 said:
Got it
Sent from a Galaxy 5 light years away
Click to expand...
Click to collapse
Very good, knew it was there. Did this work though? Toggle in settings via my other secsettings mod but does it activate process?
RevelationOmega said:
Very good, knew it was there. Did this work though? Toggle in settings via my other secsettings mod but does it activate process?
Click to expand...
Click to collapse
I need all the sprint APKs if you happen to have them. Bc when I dial *2 to go the sprint service thing in the phone it doesn't work... Neither does hands free activation... It just gets stuck there..
Edit: it's called "Sprint zone"
Edit 2: Actually I don't think that matters lol... You should ask slesh bc apparently in his new ROM he has it working! Maybe just ask him for a flashable?!
Sent from a Galaxy 5 light years away
Joe0113 said:
I need all the sprint APKs if you happen to have them. Bc when I dial *2 to go the sprint service thing in the phone it doesn't work... Neither does hands free activation... It just gets stuck there..
Edit: it's called "Sprint zone"
Sent from a Galaxy 5 light years away
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23501681358539883 sprint zone apk.
Let me know man
WiFi calling closes and will not turn on
So I tried this out using v1.1 and made the change in sqlite. When I first boot my phone I get two FC's from WiFi Calling and when I open WiFi calling and try to turn it on it just sits there and never turns on.
One other thing I just noticed is that when I go back into sqlite and look at the value of com.oem.smartwifisupport.vowifi_pref_state it has a value of 0 even though I changed it to 1. Every time I reboot and check the value it is set to 0.
If you happen to know how I can get the value to stick please let me know. That may be why this isn't working for me.
jmolhava said:
So I tried this out using v1.1 and made the change in sqlite. When I first boot my phone I get two FC's from WiFi Calling and when I open WiFi calling and try to turn it on it just sits there and never turns on.
One other thing I just noticed is that when I go back into sqlite and look at the value of com.oem.smartwifisupport.vowifi_pref_state it has a value of 0 even though I changed it to 1. Every time I reboot and check the value it is set to 0.
If you happen to know how I can get the value to stick please let me know. That may be why this isn't working for me.
Click to expand...
Click to collapse
I'll be sure to look into it now. Thanks for report
jmolhava said:
So I tried this out using v1.1 and made the change in sqlite. When I first boot my phone I get two FC's from WiFi Calling and when I open WiFi calling and try to turn it on it just sits there and never turns on.
One other thing I just noticed is that when I go back into sqlite and look at the value of com.oem.smartwifisupport.vowifi_pref_state it has a value of 0 even though I changed it to 1. Every time I reboot and check the value it is set to 0.
If you happen to know how I can get the value to stick please let me know. That may be why this isn't working for me.
Click to expand...
Click to collapse
And FYI - I am on a stock rooted ROM
Wifi calling draining the hell outta my battery. Drained 13% while I was sleeping.
Sent from a Galaxy 5 light years away
RevelationOmega said:
http://www.androidfilehost.com/?fid=23501681358539883 sprint zone apk.
Let me know man
Click to expand...
Click to collapse
Joe0113 said:
I need all the sprint APKs if you happen to have them. Bc when I dial *2 to go the sprint service thing in the phone it doesn't work... Neither does hands free activation... It just gets stuck there..
Edit: it's called "Sprint zone"
Edit 2: Actually I don't think that matters lol... You should ask slesh bc apparently in his new ROM he has it working! Maybe just ask him for a flashable?!
Sent from a Galaxy 5 light years away
Click to expand...
Click to collapse
Sleshepic told me where to put the zone.apk and it goes in system/priv-app.
Sent From My Galaxy S5 Far Far Away
Joe0113 said:
I need all the sprint APKs if you happen to have them. Bc when I dial *2 to go the sprint service thing in the phone it doesn't work... Neither does hands free activation... It just gets stuck there..
Edit: it's called "Sprint zone"
Edit 2: Actually I don't think that matters lol... You should ask slesh bc apparently in his new ROM he has it working! Maybe just ask him for a flashable?!
Sent from a Galaxy 5 light years away
Click to expand...
Click to collapse
Me and splesh were working on this long before. I knew of it working in mystery rom before I even released this. This is working for temp fixes for AND2 ROM, stock (for now) and future possible fixes if needed.
I'll poke my head in here soon to help if I can. I can write a script that will force the entry in the SQL database as well if that will help.
If you get stuck somewhere or need help with something, let me know.
Cheers - TD
---------- Post added at 05:31 PM ---------- Previous post was at 04:46 PM ----------
Does the download booster need to be installed from the other thread before this one?
[Mod][Testing] Enable "Trusted Face" (face unlock) on lollipop
Recently TBO came out with a blacked out gapps, it also came with a folder called "optional", and it had files for enabling face unlock! I went ahead and gave it a shot putting them in their right olaces, rebooted, and trudted face showed up in smart lock under security, and i was able to set it up as well! I can now turn on my screen, then hold my phone up to my face and the fingerprint unlock will turn into a swipe and im in!
I went ahead and packaged the files separately in a flashable zip, available here, you may need to clear caches after flashing. This does work on touchwiz lollipop, I'm not sure about kitkat, it may also work on other lollipop roms, i dont have any devices to test it on though.
Here is a screenshot of the setting
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and a video demonstrating it working
As you can see, the lockscreen is there and then switches to swipe. I havent tested it with other lockscreen types but i'd assume it'd look similar.
Its kind of finnicky and so far i havent found it to be very practical, maybe you all will have better success, still pretty neat.
Sent from my SM-G900A using Tapatalk
this don`t for TW. THIS FOR AOSP, please specify on title.
Rakuu said:
Recently TBO came out with a blacked out gapps, it also came with a folder called "optional", and it had files for enabling face unlock! I went ahead and gave it a shot putting them in their right olaces, rebooted, and trudted face showed up in smart lock under security, and i was able to set it up as well! I can now turn on my screen, then hold my phone up to my face and the fingerprint unlock will turn into a swipe and im in! I went ahead and packaged the files separately in a flashable zip, available here. Here is a screenshot of the setting
and a video demonstrating it working
As you can see, the lockscreen is there and then switches to swipe, i havent tested it with other lockscreen types but i'd assume it'd look similar. Its kind of finnicky and so far i havent found it to be very practical, maybe you all will have dome success, still pretty neat.
Sent from my SM-G900A using Tapatalk
Click to expand...
Click to collapse
I went and flashed it on my s5 running the MOAR 6.2 rom (5.0 lollipop). at first it gave me a system ui error. I flashed it again and same thing. tried it one more type but this time I remembered to wipe the caches...
other then my errors, this works like 80% of the time. nice man. hopefully you can get it to work 110%.
Borfas said:
this don`t for TW. THIS FOR AOSP, please specify on title.
Click to expand...
Click to collapse
its funny how a senior member at xda cant tell the difference between a Samsung lockscreen and an ASOP lockscreen. SMH
AV1d said:
I went and flashed it on my s5 running the MOAR 6.2 rom (5.0 lollipop). at first it gave me a system ui error. I flashed it again and same thing. tried it one more type but this time I remembered to wipe the caches...
other then my errors, this works like 80% of the time. nice man. hopefully you can get it to work 110%.
its funny how a senior member at xda cant tell the difference between a Samsung lockscreen and an ASOP lockscreen. SMH
Click to expand...
Click to collapse
I didn't actually test this to be quite honest, flashfire wouldnt flash any of the gapps package so i moved the files manually and that worked, i assumed a zip doing the same thing would work fine but that seems to be incorrect, thanks for testing though, i guess i'll add it to the main post.
Also yes, this works on touchwiz, i have a G900A which is unable to even install anything other than TW. The only reason I was looking for something like this is because samsung removdd faceunlock from touchwiz.
Sent from my SM-G900A using Tapatalk
Rakuu said:
I didn't actually test this to be quite honest, flashfire wouldnt flash any of the gapps package so i moved the files manually and that worked, i assumed a zip doing the same thing would work fine but that seems to be incorrect, thanks for testing though, i guess i'll add it to the main post.
Also yes, this works on touchwiz, i have a G900A which is unable to even install anything other than TW. The only reason I was looking for something like this is because samsung removdd faceunlock from touchwiz.
Sent from my SM-G900A using Tapatalk
Click to expand...
Click to collapse
I've found that(suprise suprise) using the improve recognition feature helps quite a bit, just use it everywhere you gk from a few different angles and stuff, i've gotten it where as long as the lightings ok it unlocks even when i'm looking down at the phone.
Sent from my Tw5ted SM-G900A using Tapatalk
Flashed in SS and cleared cache, rebooted fine. I go inst Security>Smart Lock but it looks grey out. I have my lockscreen set to Swipe\No Security. Should the lockscreen be set to something different?
...... I enabled FingerPrint and it worked!!! on TMS 2.something ...
jimwick said:
Flashed in SS and cleared cache, rebooted fine. I go inst Security>Smart Lock but it looks grey out. I have my lockscreen set to Swipe\No Security. Should the lockscreen be set to something different?
...... I enabled FingerPrint and it worked!!! on TMS 2.something ...
Click to expand...
Click to collapse
You have to have some kind of lock already set, having swipe will not work as it needs something to fall back on.
Sent from my Tw5ted SM-G900A using Tapatalk
Going to try the voice later tonight if I can, did anyone test that yet?
jimwick said:
Going to try the voice later tonight if I can, did anyone test that yet?
Click to expand...
Click to collapse
I havent tried it, it uses google now though from what i read, i think it recognizes you saying ok google or it just uses that sample you record saying it to compare to you talking and unlocks.
Sent from my Tw5ted SM-G900A using Tapatalk
I read that too, i use Google Now so setting it up should be no problem, i just have to resetup my voice profile. Just trying to finish working for today...
This doesn't seem to work for the S5 Active (rooted G870A running lollipop update OF3 courtesy @muniz_ri), neither manually installing the apk, nor flashing the zip via flashfire worked - manual install the first time made it show in the smartlock menu screen but gave the "unfortunately... stopped" message when trying to use it, and after flashing, it wasn't in the menu anymore at all, and a second try at manual install said it had installed, but it still wasn't actually there in the choices.
Did you check permissions? Sometimes ff doesn't set them correctly.
SM-G870A Peace
berniesteven said:
Did you check permissions? Sometimes ff doesn't set them correctly.
SM-G870A Peace
Click to expand...
Click to collapse
No, I didn't, only made the basic attempts to install. Also, I'm enough newbie to things Android that I wouldn't know what to check the permissions of (e.g. which components, if there are multiple components, I understand an apk is analogous to a zip file or archive), or what they should be (or should have been) set to vs. what they were....
mtpmd said:
No, I didn't, only made the basic attempts to install. Also, I'm enough newbie to things Android that I wouldn't know what to check the permissions of (e.g. which components, if there are multiple components, I understand an apk is analogous to a zip file or archive), or what they should be (or should have been) set to vs. what they were....
Click to expand...
Click to collapse
OK. I didn't try to install. Maybe I will.
SM-G870A Peace
Enabling this mod will disable Smart Stay!
Hi, any news for samsung users TW?
Regards
wawis said:
Hi, any news for samsung users TW?
Regards
Click to expand...
Click to collapse
Mind explaining? This mod works on stock TW if thats what you're asking.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Rakuu said:
Mind explaining? This mod works on stock TW if thats what you're asking.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Click to expand...
Click to collapse
It works great for me. I'm on PhoeniX Rom 5.5 ?
Nice but not working 100% thnx
Sent from my SM-G928F using Tapatalk