Hello, I have problem with Point of View ProTab 25XXL tablet
after too many pattern attempts I need factory reset (disabled usb tethering setting and wifi off). When I get to android system recovery I can't do anything. I'm trying volume up/down buttons but I'm still on "reboot system now"
When I push volume down button, nothing happens:
(sorry, tablet is a bit dirty )
dsc_1117.jpg
and when I push volume up button, just this screen:
dsc_1118.jpg
Help please...
Thank you
Nidecker8 said:
Hello, I have problem with Point of View ProTab 25XXL tablet
after too many pattern attempts I need factory reset (disabled usb tethering setting and wifi off). When I get to android system recovery I can't do anything. I'm trying volume up/down buttons but I'm still on "reboot system now"
When I push volume down button, nothing happens:
(sorry, tablet is a bit dirty )
dsc_1117.jpg
and when I push volume up button, just this screen:
dsc_1118.jpg
Help please...
Thank you
Click to expand...
Click to collapse
try to flash stock recovery
Vaibhav Chauhan said:
try to flash stock recovery
Click to expand...
Click to collapse
Hi, I'm a newbie for Android world. Can you tell me more info about that? I don't know what is stock recovery and where can I find it?
....I think this would be important: I tried something already and I found this instructions:
downloads. pointofview-online. com /Tablets/10%20Inch%20Tablets/TAB-PROTAB25XXL/Firmware%20upgrade%20instructions%20TAB-PROTAB25XXL%20v1. pdf
(sorry I can't send normal url)
So on page 5, a tried to install that driver but windows did not allow me to install it. I have windows 8.1 and I'm administrator but i can't install that driver - I think it is important if I want flash - or am I wrong?
Nidecker8 said:
Hi, I'm a newbie for Android world. Can you tell me more info about that? I don't know what is stock recovery and where can I find it?
....I think this would be important: I tried something already and I found this instructions:
downloads. pointofview-online. com /Tablets/10%20Inch%20Tablets/TAB-PROTAB25XXL/Firmware%20upgrade%20instructions%20TAB-PROTAB25XXL%20v1. pdf
(sorry I can't send normal url)
So on page 5, a tried to install that driver but windows did not allow me to install it. I have windows 8.1 and I'm administrator but i can't install that driver - I think it is important if I want flash - or am I wrong?
Click to expand...
Click to collapse
stock recovery is recovey mode in your device given by company but you can flash custom recovery like cwm
all device have their different recovery & you can't flash another device's recovery
you should have device drive installed on your computer
Vaibhav Chauhan said:
you should have device drive installed on your computer
Click to expand...
Click to collapse
This error always....what should I do? In that error, there are not described the details what is wrong
/EDIT:
..and that driver is downloaded from:
downloads. pointofview-online. com (without spaces, sorry)
>> tablets >> 10 inch tablets >> TAB-PROTAB25XXL >>TAB-PROTAB25XXL_V1.0-1.1_20130103.zip
Nidecker8 said:
This error always....what should I do? In that error, there are not described the details what is wrong
/EDIT:
..and that driver is downloaded from:
downloads. pointofview-online. com (without spaces, sorry)
>> tablets >> 10 inch tablets >> TAB-PROTAB25XXL >>TAB-PROTAB25XXL_V1.0-1.1_20130103.zip
Click to expand...
Click to collapse
i don't understand the language in pic
but i think this is not currect derivers package or may be currupted
Vaibhav Chauhan said:
i don't understand the language in pic
but i think this is not currect derivers package or may be currupted
Click to expand...
Click to collapse
I tried unofficial driver and it works! Great, thank you very much!
Nidecker8 said:
I tried unofficial driver and it works! Great, thank you very much!
Click to expand...
Click to collapse
your welcome
Hi, I have the same problem, what drivers you used please? I tried android and adb worked. Thank you.
how bring this in fastboot mode
Related
Dear All,
So here goes the first unofficial ROM (thanks to Ukrainen) for Penta IS709C. Its a Jellybean 4.2.2. and even though is still in very early phase of testing, sharing it for others to try. I am not a developer but if you find any issues, please let me know and I'll forward them to the developer...
Use it at your own risk. All your existing data will be lost and I am not responsible if you brick your device (however will try and help you bring it back to the state you purchased it in, but no guarantees)
This is what you need to do:
1) Download the zip file from here: https://docs.google.com/file/d/0B5T-ylTRyyKdczY3Y1A1VTZXUms/edit?usp=sharing
2) Extract it to your desktop or any other loaction on your PC/ Desktop you prefer
3) In the folder 'CustomRom4.2.2forPentaIS709C', right click on RKtool.exe and click run as administrator (on Windows 7, figure out your self for any other OS)
4) Put your tab in flash mode [switch it off, press and hold the menu button (middle button of the 3 buttons below the camera) and then insert the usb cable already connected to your PC]
5) Your PC will install its drivers automatically, it auto driver installation fails...go to device manager on your PC and you'll find your device in other devices. Right click on it, click on update driver software, click browse my computer...and then point to the drivers section of folder 'CustomRom4.2.2forPentaIS709C'.
6) After driver update Click on EraseIDB of RKtool.exe window and wait for it to complete
7) Click on Run (You need not do anything after this step, just sit and enjoy)
8) Your tab will reboot once the above step is completed and the recovery system will do some formatting.
9) It will reboot once again and within next 5-10 min you'll have a working Android 4.2.2. on your PentaIS709C.
If you want CWM Recovery (thanks to Fun_), after completion of above steps (i.e. update to 4.2.2) download the zip file from here: https://docs.google.com/file/d/0B5T-ylTRyyKdcUlBMVFab3ZIY1U/edit?usp=sharing, unzip it, put yoour tab in flash mode, open RKtool.exe, uncheck all the boxes except for recovery, point the path for recovery to the recovery.img of unzipped CWM folder and click run. Your tab will reboot after completion, do a manual reboot if tab is hanged at boot logo for more than 5 minutes and you'll have the CWM recovery on your device.
Enjoy....
Known issues:
1) Camera is not working....
2) With the tab in portrait mode, if we touch and hold any icon, the screen gets inverted...
I deserve a thanks if I've helped you ever.... Please click thanks if you agree...
All the best
Hi,
It would be nice if any specific advantage of upgrade to Jelly bean in Penta IS709C.
Is there any fix for Camera issue reported in the article?
It has all the conventional advantages of Jelly Bean
Try this link:
http://www.android.com/about/jelly-bean/
Camera issue is still not resolved...
Regards,
Please click thanks if I've helped you ever
skyblueman said:
Hi,
It would be nice if any specific advantage of upgrade to Jelly bean in Penta IS709C.
Is there any fix for Camera issue reported in the article?
Click to expand...
Click to collapse
Nothing Happens
I tried installing custom rom on my device (IS709C), but it get stuck in recovery mode and after some time reboots in normal mode.
amit_aks_007 said:
Dear All,
So here goes the first unofficial ROM (thanks to Ukrainen) for Penta IS709C. Its a Jellybean 4.2.2. and even though is still in very early phase of testing, sharing it for others to try. I am not a developer but if you find any issues, please let me know and I'll forward them to the developer...
Use it at your own risk. All your existing data will be lost and I am not responsible if you brick your device (however will try and help you bring it back to the state you purchased it in, but no guarantees)
This is what you need to do:
1) Download the zip file from here: https://docs.google.com/file/d/0B5T-ylTRyyKdczY3Y1A1VTZXUms/edit?usp=sharing
2) Extract it to your desktop or any other loaction on your PC/ Desktop you prefer
3) In the folder 'CustomRom4.2.2forPentaIS709C', right click on RKtool.exe and click run as administrator (on Windows 7, figure out your self for any other OS)
4) Put your tab in flash mode [switch it off, press and hold the menu button (middle button of the 3 buttons below the camera) and then insert the usb cable already connected to your PC]
5) Your PC will install its drivers automatically, it auto driver installation fails...go to device manager on your PC and you'll find your device in other devices. Right click on it, click on update driver software, click browse my computer...and then point to the drivers section of folder 'CustomRom4.2.2forPentaIS709C'.
6) After driver update Click on EraseIDB of RKtool.exe window and wait for it to complete
7) Click on Run (You need not do anything after this step, just sit and enjoy)
8) Your tab will reboot once the above step is completed and the recovery system will do some formatting.
9) It will reboot once again and within next 5-10 min you'll have a working Android 4.2.2. on your PentaIS709C.
If you want CWM Recovery (thanks to Fun_), after completion of above steps (i.e. update to 4.2.2) download the zip file from here: https://docs.google.com/file/d/0B5T-ylTRyyKdcUlBMVFab3ZIY1U/edit?usp=sharing, unzip it, put yoour tab in flash mode, open RKtool.exe, uncheck all the boxes except for recovery, point the path for recovery to the recovery.img of unzipped CWM folder and click run. Your tab will reboot after completion, do a manual reboot if tab is hanged at boot logo for more than 5 minutes and you'll have the CWM recovery on your device.
Enjoy....
Known issues:
1) Camera is not working....
2) With the tab in portrait mode, if we touch and hold any icon, the screen gets inverted...
I deserve a thanks if I've helped you ever.... Please click thanks if you agree...
All the best
Click to expand...
Click to collapse
Did you click on Erase IDB?
Hi Danish,
Did you click on Erase IDB before flashing the files?
Regards,
Please click thanks if I've helped you ever
danish1994 said:
I tried installing custom rom on my device (IS709C), but it get stuck in recovery mode and after some time reboots in normal mode.
Click to expand...
Click to collapse
works like a charm
:good:
Thanks for the post.
followed the instruction and now i have Android version 4.2.2
This method works fine.
sir please wifi not working after that
wifi not working sir please help me sir please thank you
Sir
Successfully uploaded the custom rom on my tab.But I am not able to enable wifi on it.Nothing is happening when I enable wifi in the settings menu.I need your help regarding this.
Hi sir
I have penta is701x I can't instol twrp/cwm recavry please sir help me
How can I instil any recavry ??????
there is a driver problem in my win 10 pc........how can i solved it
Hello
Im the owner of a brand new Xperia z tablet from China where Google is not welcome anymore. I try to install the Google apps ( play store mainly) on my tablet but was not able to succeed. Can anyone help me?
The model is sgp 311
Android version : 4.1.2
Kernel: 3.4.0-g298631f-02047-gec59411
Build model : 10.1.c.0.370
Thanks for your precious help
yi_wei said:
Hello
Im the owner of a brand new Xperia z tablet from China where Google is not welcome anymore. I try to install the Google apps ( play store mainly) on my tablet but was not able to succeed. Can anyone help me?
The model is sgp 311
Android version : 4.1.2
Kernel: 3.4.0-g298631f-02047-gec59411
Build model : 10.1.c.0.370
Thanks for your precious help
Click to expand...
Click to collapse
did u try installing them from Here
im not sure which one, its either the date gapps-jb 12-12-13 or gapps-jb 13-3-3 for the xtz
Hello arcsuser,
Thanks for your help,
I have downloaded the zip file as proposed.
unfortunately I was not able to install it because I don't have the root access on my tablet.
If there is a way to install the zip file without the recovery mode I'd be glad to know it.
if not, I will have to go through the process.
thanks again for your help.
let me know if there is a way without the root mode
:good:
yi_wei said:
Hello arcsuser,
Thanks for your help,
I have downloaded the zip file as proposed.
unfortunately I was not able to install it because I don't have the root access on my tablet.
If there is a way to install the zip file without the recovery mode I'd be glad to know it.
if not, I will have to go through the process.
thanks again for your help.
let me know if there is a way without the root mode
:good:
Click to expand...
Click to collapse
U want to install it without root, i dont think thats possible,
Anyway have you try installing it as a normal apks? If it still doesnt install then i guess you really have to be rooted..
How about, get root, install apps, then unroot.. I dont think the apps are affected. Im not sure just give it a try
Sent from my SGP311 using xda app-developers app
arcsuser said:
U want to install it without root, i dont think thats possible,
Anyway have you try installing it as a normal apks? If it still doesnt install then i guess you really have to be rooted..
How about, get root, install apps, then unroot.. I dont think the apps are affected. Im not sure just give it a try
Sent from my SGP311 using xda app-developers app
Click to expand...
Click to collapse
Actually I have now the same question than "OP" on the recovery mode. I have now rooted the device the "super user app" is available and activated.
but I still can't access the recovery mode. I have tried the key combination mentioned in your post to "OP". then I referred to the post from DooMLoRD "All the info you need before you begin" with the Xperia Z tablet where the recovery mode is described.
I have the sony screen displayed, then I press volume up, the boot is going the normal way.
I tried with the usb cable connected to the PC, then it goes directly to the Xperia logo.
I tried the normal reboot (one light falshing) and the hard reboot (3 lights flashing) I do not have the device vibrating like explained by DooMLoRD.
Is this the reasn ?
thanks for your help again.
yi_wei said:
Actually I have now the same question than "OP" on the recovery mode. I have now rooted the device the "super user app" is available and activated.
but I still can't access the recovery mode. I have tried the key combination mentioned in your post to "OP". then I referred to the post from DooMLoRD "All the info you need before you begin" with the Xperia Z tablet where the recovery mode is described.
I have the sony screen displayed, then I press volume up, the boot is going the normal way.
I tried with the usb cable connected to the PC, then it goes directly to the Xperia logo.
I tried the normal reboot (one light falshing) and the hard reboot (3 lights flashing) I do not have the device vibrating like explained by DooMLoRD.
Is this the reasn ?
thanks for your help again.
Click to expand...
Click to collapse
did you spam the volume up?
our tablet will not vibrate because DooMLoRDs links is actually for phone that ALSO works for XTZ..
You said you're rooted but still cant go to recovery.. HHmmmm..
Do you have the recovery installed? cause if not it will not work
you can install it Here
if you are rooted and the recovery is installed.. then nothing can go wrong
arcsuser said:
did you spam the volume up?
our tablet will not vibrate because DooMLoRDs links is actually for phone that ALSO works for XTZ..
You said you're rooted but still cant go to recovery.. HHmmmm..
Do you have the recovery installed? cause if not it will not work
you can install it Here
if you are rooted and the recovery is installed.. then nothing can go wrong
Click to expand...
Click to collapse
I have downloaded and tried unsucessfully to flash the recovery tool.
I couldn't access the flash mode as described in the basics from DooMLoRD.
“while device is power OFF
Volume Up + USB cable connected to PC -> FASTBOOT MODE (BLUE LED will light up）“
I'm afraod I will need some tutorial to go through the steps of fast boot...
thanks
You don't need recovery to install the apps if you have root. Just unzip the file using root explorer. The unzipped file will show from the structure where the files have to go so just copy them to the corresponding folder on the tab using root explorer. (apps, and their associated odex file if there is one, will usually be in /system/app folder) Don't forget to set the permissions (rw-r--r-- for system apps and odex files), also using root explorer. Reboot and if they're gonna work as system apps they will...
Sent from my GT-P7510 using XDA Premium HD app
yi_wei said:
I have downloaded and tried unsucessfully to flash the recovery tool.
I couldn't access the flash mode as described in the basics from DooMLoRD.
“while device is power OFF
Volume Up + USB cable connected to PC -> FASTBOOT MODE (BLUE LED will light up）“
I'm afraod I will need some tutorial to go through the steps of fast boot...
thanks
Click to expand...
Click to collapse
How to put Xperia Tablet Z into Fastboot Mode.
1. Completely POWER OFF tablet (not Sleep Mode).
2. Connect one end of USB cable to tablet.
3. Press and hold tablet's VOL+ button.
4. Connect other end of USB cable to computer.
5. Wait until tablet's notification light flashes red then solid blue, then release VOL+ button.
6. To exit Fastboot Mode, disconnect the USB cable.
Cat McGowan said:
How to put Xperia Tablet Z into Fastboot Mode.
1. Completely POWER OFF tablet (not Sleep Mode).
2. Connect one end of USB cable to tablet.
3. Press and hold tablet's VOL+ button.
4. Connect other end of USB cable to computer.
5. Wait until tablet's notification light flashes red then solid blue, then release VOL+ button.
6. To exit Fastboot Mode, disconnect the USB cable.
Click to expand...
Click to collapse
Hello,
thanks for the walk through.
I have followed it step by step and here is the result. my computer (PC windows 7) makes a sound like a usb device is connected but not recognized.
when I connect the tablet in the normal way it is recognized without problem.
do you think I need to install some drivers on the PC as well ?
thanks for your help
yi_wei said:
Hello,
thanks for the walk through.
I have followed it step by step and here is the result. my computer (PC windows 7) makes a sound like a usb device is connected but not recognized.
when I connect the tablet in the normal way it is recognized without problem.
do you think I need to install some drivers on the PC as well ?
thanks for your help
Click to expand...
Click to collapse
You need to install Sony Mobile's Fastboot driver.
Cat McGowan said:
You need to install Sony Mobile's Fastboot driver.
Click to expand...
Click to collapse
Hello Cat McGowan,
I have made some progress since your post. I have downloaded and installed fastboot toolbox from DooMLord (V1.0) and could access the fastboot mode
My final goal is to install the gapps on my tablet, I have downloaded the package the android 4.1.x.
to install the gapps, I need to find the recovery mode,
to install the recovery mode I have downloaded the TabZ_DooMLoRD_AdvStkKernel.img.
For the next step I need some help because I can't install the *.img through flashboot toolbox. or anything else for that matter.
thanks again for your good advice.
yi_wei said:
Hello Cat McGowan,
I have made some progress since your post. I have downloaded and installed fastboot toolbox from DooMLord (V1.0) and could access the fastboot mode
Hello, Quick feed back on what I have been doing the last days.
I have finally understood the CWM recovery tool and managed to install from zip file the google apps.
unfortunately something failed in the process and now I can't acces the tablet anymore. "google service has unexpectly stopped"
I can't access the recovery tool anymore.
I may have to flash a new rom completely.
anyone has a suggestion ?
thanks for your help
Click to expand...
Click to collapse
Yes ! I finally did it. using the CWM tool. and loaded the package.
thanks again for all you help
yi_wei said:
Yes ! I finally did it. using the CWM tool. and loaded the package.
thanks again for all you help
Click to expand...
Click to collapse
Hey yi wei! I also got my xtz in China without any google service. Do you mind telling me how you rooted your device? I couldn't find a tool that roots xtz from China. Many thanks!
how to hard reset my sony xperia tablet z .
Hey , im new here .
My xtz is made in china . I forgot the lock tablet password .
So how could i reset the tablet to unlock my tablet ?? Plss help .
ROOT IRIS 401E BY VICKYGREAT 18
First install these
ADB Drivers:
http://www.mediafire.com/download.php?c5nf3rlhxmxhu4x
Debug Drivers:
http://www.mediafire.com/download.php?2tyg0k2xp3ejgyg
Debugtools
http://www.mediafire.com/download.php?rngukh111vqfr8h
cwm
http://www.mediafire.com/?9jl6v6s9daax1pd
BEFORE doing this TURN OFF ALL ANTIVIRUS AND FIREWALL PROGRAMS
now
and turn on usb debugging from applications\developement
install cwm
1.install sci usb drivers
2.extract debug tool
3.open channel server from {DEBUG_TOOL\DEBUG_TOOL\CHANNELSERVER\Bin}
4.then open research download from { DEBUG_TOOL\DEBUG_TOOL\ResearchDownload\Bin}
5.now click on settings in research download
In download settings main page
Select product
Click on sc6820
Uncheck select all files
Now select these files by double clicking under filename
FDL1
FDL2
RECOVERY
6.then click ok
TURN OFF YOUR PHONE
7.NOW CLICK ON START DOWNLOADING
8.HOLD VOLUME – BUTTON ON PHONE
PLUG YOUR PHONE USB CABLE
IT WILL SHOW PROCESS
WAIT FOR PASSED
UNPLUG USB
NOW REBOOT INTO RECOVERY VIA PRESSING
VOLUME DOWN+POWER ON
YOU HAVE CWM RECOVERY NOW
NOW ROOTING
JUST GO TO CWM
1.INSTALL ZIP FROM SDCARD
2.SELECT SuperuserAndFullBackup
3.WIPE CACHE
4.WIPE DALVIK CACHE FROM ADVANCED MENU
REBOOT SYSTEM NOW
HURREEYYY ROOTED ]
note:-
follow all steps carefully
ask anything if you are stuck somewhere i will help
Credits :-
1.ME COZ I M FIRST WHO ROOTED THIS PHONE
2. ElectronikHeart {xda}
HIT THANKS IF YOU ARE SUCCEED
thanks
thanks vickygreat18, i will report back.
it works!
hello again vickygreat18, thanks a lot. It works!!!
Installation error
I'm not able to install the "sci usb drivers" in the first place
I'm using windows 8 single language OS.
my guess is it doesn't work on this particular version of operating system.
am i right?
is there any solution for windows 8?
please help.
Eror
i do. but error.
Checking Baudrate
mr.fanatic said:
hello again vickygreat18, thanks a lot. It works!!!
Click to expand...
Click to collapse
thanks for motivating me
chinmay412 said:
I'm not able to install the "sci usb drivers" in the first place
I'm using windows 8 single language OS.
my guess is it doesn't work on this particular version of operating system.
am i right?
is there any solution for windows 8?
please help.
Click to expand...
Click to collapse
hey chinmay
first of all so sorry for too late reply i was busy in some work
in windows 8 i also tried too much but it was not successfull
so i installed windows 7
and go succeed
so i think these will not work in windows 8
try in windows 7
and then tell me
:good::good:
kaotd99 said:
i do. but error.
Checking Baudrate
Click to expand...
Click to collapse
you are doing it right but i think you forgot to start channel server first
start channel server first then run researchdownload
and while connecting phone press volume down button
it will show progress and then passed in a very short time
then it will be done
sorry for late reply
if i do not reply on my thread plz PM me
thanks !!!
thanks it works !!!:laugh:
CWM not booting!
Hey, I tried all your steps accordingly. It flashed successfully. But I am unable to boot into cwm. What should I do?
Recovery file not working..............
cwm is a image and the link seems to have a corrupt file............
need more help
Hi bro I am. Confused about your method is this phone can be root by one click if not
Please help me if you send pics or video how to root iris 401e you will you upload video in youtube or send me pics plzzz reply fast I am dying to root my email is [email protected]
Or plz help us to upgrade its o:silly::c:cryingnfused:s plzzzx help I am dying
lifehacker69 said:
Hey, I tried all your steps accordingly. It flashed successfully. But I am unable to boot into cwm. What should I do?
Click to expand...
Click to collapse
bro press
volume down + power button at the same time and hold it till it shows cwm
and if this dont takes you to cwm then connect ur phone to pc via adb and give command in command prompt
adb reboot-recovery
devu41514 said:
Hi bro I am. Confused about your method is this phone can be root by one click if not
Please help me if you send pics or video how to root iris 401e you will you upload video in youtube or send me pics plzzz reply fast I am dying to root my email is [email protected]
Or plz help us to upgrade its o:silly::c:cryingnfused:s plzzzx help I amounts dying
Click to expand...
Click to collapse
bro I cant upload video I will make this guide with photos in 2 or 3 days
will upload pics soon
devu41514 said:
Hi bro I am. Confused about your method is this phone can be root by one click if not
Please help me if you send pics or video how to root iris 401e you will you upload video in youtube or send me pics plzzz reply fast I am dying to root my email is [email protected]
Or plz help us to upgrade its o:silly::c:cryingnfused:s plzzzx help I amounts dying
Click to expand...
Click to collapse
bro I cant upload video I will make this guide with photos in 2 or 3 days
and if u are stuck in any step i suggest you to change usb port
thnxxxcccc
Thnxxxxxx bro tell me your fb id I wanted to be yo:good:ur frnd
Still the same problem.
vickygreat18 said:
bro press
volume down + power button at the same time and hold it till it shows cwm
and if this dont takes you to cwm then connect ur phone to pc via adb and give command in command prompt
adb reboot-recovery
Click to expand...
Click to collapse
Holding down buttons just flickred the boot screen once and the phone just rebooted normally. I did it many times according to the instructions but still the same. About the adb, my PC doesn't recognise my device. I installed drivers according to the instructions by various sources but still the same problem. I did had a spreadtrum device of micromax previously and had the same problem on it.
lifehacker69 said:
Holding down buttons just flickred the boot screen once and the phone just rebooted normally. I did it many times according to the instructions but still the same. About the adb, my PC doesn't recognise my device. I installed drivers according to the instructions by various sources but still the same problem. I did had a spreadtrum device of micromax previously and had the same problem on it.
Click to expand...
Click to collapse
GUYS
SORRY BUT I M REALLY TOO MUCH BUSY NOW AND TRYING TO GET TIME FOR A VIDEO TUTORIAL OR WITH IMAGES GUIDE
AND FOR ADB RECOGNITION YOU HAVE TO ADD VENDOR ID OF THIS PHONE WHICH IS 0x1782 in adb_usb.ini or you can paste the attached ADB_USB.INI file to
C:\Users\{your username}\.android\
if after that also adb is not being connected
then plug the cable to the phone and install pdanet.exe which is also attached here
make sure for adb "usb debugging" is ticked in [settings\applications\developement)
phone will be connected to adb for sure
please unzip both files before using
prashantchanchal77 said:
cwm is a image and the link seems to have a corrupt file............
Click to expand...
Click to collapse
bro i checked it and image is not corrupt but you can not flash it through adb
Will this work for 412
I have a lava iris 412, will your instructions and files work for it?
Thanks
Hello, how to root Op3n Dott P4502 ?
I tested some programs on google play and on my pc, and it can't root my mobile
Can someone help me with root ?
Thanks.
@refresh
I too need this, pls answer.
1. Download and install apk from google play "MTK Engineering Mode"
2. In this apk "MTK Settings->Log and Debugging->User2Root" push "Root" button and exit apk.
3. Switch on "Debugging Mode" in phone:
-open up Settings, then scroll all the way down to About phone. Once there, tap Software information, then tap Build number seven times. You'll see a toast notification alerting you that you are now a developer.
- go back to the main Settings page and you'll see a new entry for Developer options. In this menu check USB debugging
4. Download and install this program iRoot, (download with IE beacuse firefox see dangerous file)
5. Run iRoot and connect phone to PC
6. Choose "Connect" and then "Root"
7. Unistall 2 chineese aplication, and install "Supersu" from google play (after restart update "supersu")
8. You have root.
I use chineese supersu beacuse this from google play have problem with permission to sdcard.
-----
Recovery Instalation:
1. Download recovery and copy it to /data/local/temp (change filename to recovery.img)
2. Installanr run Terminal emulator.
3. type:
su
dd if=/data/local/tmp/recovery.img of=/dev/recovery
4. Now reboot to recovery and make backup.
-----
Link to hungary forum Link
Thank you very much!
Rom for Medion p4502
I do the same but the phone is block in a boot loop.
When i start with the button "on" and "volume Up", i have a special screen with "No command" writed.
Then using the buttons under the screen i have a menu seems to a cm recovery.
Is there a rom for this phone ? the Medion p4502 ?
What you do , Root or CWM? I have Op3n Dott but this the same phone like medion p4502.
Dromadore said:
I do the same but the phone is block in a boot loop.
When i start with the button "on" and "volume Up", i have a special screen with "No command" writed.
Then using the buttons under the screen i have a menu seems to a cm recovery.
Is there a rom for this phone ? the Medion p4502 ?
Click to expand...
Click to collapse
-- i finaly passed the capchat so i'll edit this post with the right username --
shanti77 said:
What you do , Root or CWM? I have Op3n Dott but this the same phone like medion p4502.
Click to expand...
Click to collapse
Good morning,
I think i just need a ROM or a Backup.
I installed the systel recivert TWRP with flash tool, it works but missing the OS.
With flash tool:
I used those files: logo.bin, lk.bin, MBR, preloader.bin, secro.img, MT6582_Android_scatter.txt, boot.img, recovery.img, system.img
But i didn't have any files for: ebr1, ebr2, cache, usrdata
A the TWRP seems to work, i think i can simply flash a zip file on the SD-card.
Thank you four your interest !
ps: I was invited to type the captcha and it was very very very very difficult to read (i tried more than 20x).
Firmware ver213 link
shanti77 said:
1. Download and install apk from google play "MTK Engineering Mode"
2. In this apk "MTK Settings->Log and Debugging->User2Root" push "Root" button and exit apk.
3. Switch on "Debugging Mode" in phone:
-open up Settings, then scroll all the way down to About phone. Once there, tap Software information, then tap Build number seven times. You'll see a toast notification alerting you that you are now a developer.
- go back to the main Settings page and you'll see a new entry for Developer options. In this menu check USB debugging
4. Download and install this program iRoot, (download with IE beacuse firefox see dangerous file)
5. Run iRoot and connect phone to PC
6. Choose "Connect" and then "Root"
7. Unistall 2 chineese aplication, and install "Supersu" from google play (after restart update "supersu")
8. You have root.
I use chineese supersu beacuse this from google play have problem with permission to sdcard.
Click to expand...
Click to collapse
Thank you for excellent post! I managed to root my Medion P4502 using your instructions but substituted iRoot with Kingo Root. Here is the link with necessary steps.
shanti77 said:
Firmware ver213
Click to expand...
Click to collapse
*removed link because not passed limit yet*
Hey shanti, I too have been stupid and managed to remove my system. I was trying to navigate TWRP (so much more used to CWM with previous devices) and accidentally erased the system instead of backing it up. Is it possible to flash this with fastboot? I did managed to back up the boot files, just not the system, and I don't have a external SD card (I might be able to swap the one off my mums phone though at some point).
Thanks
Will
PS. If it helps, I use Arch Linux (32 bit) because my laptop chargers broken I'm using my spare PC, and also the phone is the Medion variant (LIFE P4502 from Aldi)
EDIT: Buying SD Card today
Can somebody help me to make cm11 port? Thanks
Were can i find chinese supersu? I instaled from google but really have problemy with SD, lost settings after reboot, and other problems
shanti77 said:
Firmware ver213 link
Click to expand...
Click to collapse
Hello,
Is this Original firmware, and how to do it?
Thanks for helping me.
Still need original ROM for Medion P4502
Can someone tell me where and how to recover my phone?
It doesn't connect to my network provider (I tested 3 differents Sim cards), and he also change his MAC address at WIFI connection.
I need original ROM and how to put it back (how to do).
Please help me as I don't want to send it back to Medion service (3th time), as they didn't do anything.
A friend has the same phone.
Is it possible to make a copy of his ROM (and how) to put it back on mine?
Thanks for helping me.
No answer, so phone send back to Medion repair service.
Hope this time it will return in good conditions ...
Please help!
Dromadore said:
I do the same but the phone is block in a boot loop.
When i start with the button "on" and "volume Up", i have a special screen with "No command" writed.
Then using the buttons under the screen i have a menu seems to a cm recovery.
Is there a rom for this phone ? the Medion p4502 ?
Click to expand...
Click to collapse
Hi Dromadore,
Did you end up to fix you bootloop issue? Can you please share your findings with me as I am desperately looking for a solution?
Cheers,
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80110c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
brickedvice said:
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80120c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
Click to expand...
Click to collapse
theres several things you could do.. try srk tools to try and fix twrp, or fix download mode using nuke download.. i dont know how to i just know theres a way to do it.. if other fails and it doesn not go into download mode then you must short circuit the motherboard.... then look at thread g2 hard brick fix..
here but try other first as this one you have to open phone..
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
raptorddd said:
theres several things you could do.. try srk tools to try and fix twrp, or fix download mode using nuke download.. i dont know how to i just know theres a way to do it.. if other fails and it doesn not go into download mode then you must short circuit the motherboard.... then look at thread g2 hard brick fix..
here but try other first as this one you have to open phone..
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
thanks for the prompt reply! is this the srk tools you are referring to: http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 ?
also what is nuke download? Thanks in advance.
Edit: nvm I read what nuke download mode is (when no recovery and can't boot). I will try it now and see if it helps...
brickedvice said:
thanks for the prompt reply! is this the srk tools you are referring to: http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 ?
also what is nuke download? Thanks in advance.
Click to expand...
Click to collapse
yes.. and its a way to force or fix device to enter download mode.. like i said ive never used it but i know it might help. if it fails then you must open the phone .. and short circuit the motherboard.. good luck. :fingers-crossed:
raptorddd said:
yes.. and its a way to force or fix device to enter download mode.. like i said ive never used it but i know it might help. if it fails then you must open the phone .. and short circuit the motherboard.. good luck. :fingers-crossed:
Click to expand...
Click to collapse
I don't think my phone is hard bricked. USB debbuging is on and computer recognizes the device when it boots up. I simply don't know how to install twrp via adb commands or alternative methods ... or how to manually flash a custom kernel that would allow normal device boot up when dpi is changed.
brickedvice said:
I don't think my phone is hard bricked. USB debbuging is on and computer recognizes the device when it boots up. I simply don't know how to install twrp via adb commands or alternative methods ... or how to manually flash a custom kernel that would allow normal device boot up when dpi is changed.
Click to expand...
Click to collapse
well me neithe LOL.. but i think you can fix recovery with srk. i think.. read and i think you can fix that.. ive never used it..
raptorddd said:
well me neithe LOL.. but i think you can fix recovery with srk. i think.. read and i think you can fix that.. ive never used it..
Click to expand...
Click to collapse
lol I used the srk tool but now i got this error:
Critical Error!
---------------------------------------------------------------------------
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
phone is in bootloop if I decide to reboot; while if I decide to go in download mode, it doesn't do anything...
brickedvice said:
lol I used the srk tool but now i got this error:
Critical Error!
---------------------------------------------------------------------------
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
phone is in bootloop if I decide to reboot; while if I decide to go in download mode, it doesn't do anything...
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g2/help/demigod-crash-handler-critical-error-t3108512/page2
https://www.youtube.com/watch?v=x1mUpwfEeDo
raptorddd said:
http://forum.xda-developers.com/lg-g2/help/demigod-crash-handler-critical-error-t3108512/page2
https://www.youtube.com/watch?v=x1mUpwfEeDo
Click to expand...
Click to collapse
I saw those I just can't get it to be recognized by the computer. Did the guy in the video try the hard brick fix from XDA? It is not very clear how he gets his laptop to recognize the device
brickedvice said:
I saw those I just can't get it to be recognized by the computer. Did the guy in the video try the hard brick fix from XDA? It is not very clear how he gets his laptop to recognize the device
Click to expand...
Click to collapse
i do not know either.. shortening the mother board is to enter download mode..
brickedvice said:
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80110c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
Click to expand...
Click to collapse
This thread here : http://forum.xda-developers.com/showthread.php?t=2449670 might help you installing twrp via adb