[Stock ROM] Odin flashable N900PSPTDNH7 - Sprint Samsung Galaxy Note 3

Hey Guys and Gals:
Here is the stock tar for NH7.
Recommended steps:
-Download file, unzip file to extract full tar.md5 file
-Load PC Odin (right-click on file, select "Run as Administrator")
-Unplug your phone from the computer (if plugged in)
-Completely power down your phone
-Boot into download mode (Volume Down+Power+Home)
-Plug your phone into the computer
-Load tar.md5 file into PDA slot in Odin
-Flash stock rom
Download and MD5:
Download: N900PVPUDNH7_N900PSPTDNH7_N900PVPUDNH7_HOME
MD5=09CDE4B212C1430B48B906BA847813C8
Modem Only here in @freeza thread.
Older TouchWiz KitKat builds:
NC5
NAB
Other Stock Builds (Zipped Tars and One-Clicks):
KitKat
Stock NAB tar here, One-Click here.
JellyBean 4.3
Stock MJ4 tar here, One-Click here.
Tar.Md5 Files
Full stock tar.md5 files for MJ4, NAB, NC5 and NH7 here.

Thanks a lot for this! You're the man @micmars
Sent from my SM-N900P using xda app-developers app

Thanks for this micmars, this should come in handy
Sent from my SM-N900P using Tapatalk

micmars said:
Hey Guys and Gals:
Here is the stock tar for NC5.
Recommended steps:
-Download file, unzip file to extract full tar.md5 file
-Load PC Odin (right-click on file, select "Run as Administrator")
-Unplug your phone from the computer (if plugged in)
-Completely power down your phone
-Boot into download mode (Volume Down+Power+Home)
-Plug your phone into the computer
-Load tar.md5 file into PDA slot in Odin
-Flash stock rom
Download and MD5:
Download: N900PVPUCNC5_N900PSPTCNC5_N900PVPUCNC5_HOME
MD5=5E10DD0A690455E8FB8F13111F35A054
Click to expand...
Click to collapse
Thank you :good:

@micmars
Does having this file change your instructions (link) if coming from MJ4 and wanting rooted NC5?

runner77 said:
@micmars
Does having this file change your instructions (link) if coming from MJ4 and wanting rooted NC5?
Click to expand...
Click to collapse
Since this is an Odin Tar, I would have to say yes. Just follow the instructions in the OP and you should be fine. Nice to see @micmars as the OP, why not, he's everywhere!

Was wondering .. is it mandatory to use the USB 3.0 outta the box cord with our device when flashing with odin? Or are we good as long as Odin recognizes our device. .. and a huge "THANK YOU" micmars
Sent from my SM-N900P using Tapatalk

chico260 said:
Was wondering .. is it mandatory to use the USB 3.0 outta the box cord with our device when flashing with odin? Or are we good as long as Odin recognizes our device. .. and a huge "THANK YOU" micmars
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
I haven't even taken that cable out of the box, Odin'ed many times. I don't have USB 3 on my puter.

My Man!

Thanks @micmars. Is it best to flash this first before flashing another NC5 rom to get all the firmware updated or could I go straight to another NC5 rom. Im already on NABD

mta1981 said:
Thanks @micmars. Is it best to flash this first before flashing another NC5 rom to get all the firmware updated or could I go straight to another NC5 rom. Im already on NABD
Click to expand...
Click to collapse
Look at this like taking the OTA, you should Odin this first to get your modem, baseband, and other firmware up to date. Then your phone will be ready for the NC5 ROMS without issue.

SanityBroken said:
Look at this like taking the OTA, you should Odin this first to get your modem, baseband, and other firmware up to date. Then your phone will be ready for the NC5 ROMS without issue.
Click to expand...
Click to collapse
Excellent, thats what I figured, thanks!!!!

SanityBroken said:
Since this is an Odin Tar, I would have to say yes. Just follow the instructions in the OP and you should be fine. Nice to see @micmars as the OP, why not, he's everywhere!
Click to expand...
Click to collapse
Thanks for your kind words, and for helping out with questions (I really wish I could get more time on the forums during the day and have my boss paying for it, such joy).
It's actually my first thread. Odd, that.
Sent from my SM-N900P using Xparent BlueTapatalk 2

micmars said:
Thanks for your kind words, and for helping out with questions (I really wish I could get more time on the forums and have my boss paying for it).
It's actually my first thread. Odd, that.
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
It's my day off, glad to help.

micmars said:
Hey Guys and Gals:
Here is the stock tar for NC5.
Recommended steps:
-Download file, unzip file to extract full tar.md5 file
-Load PC Odin (right-click on file, select "Run as Administrator")
-Unplug your phone from the computer (if plugged in)
-Completely power down your phone
-Boot into download mode (Volume Down+Power+Home)
-Plug your phone into the computer
-Load tar.md5 file into PDA slot in Odin
-Flash stock rom
Download and MD5:
Download: N900PVPUCNC5_N900PSPTCNC5_N900PVPUCNC5_HOME
MD5=5E10DD0A690455E8FB8F13111F35A054
Click to expand...
Click to collapse
This is what I get for the unzipped tar file, would you please check it out? Just wanted to make sure before I flash it.
MD5=79d6d107e0baecde597d04715927dbab

Ali1353 said:
This is what I get for the unzipped tar file, would you please check it out? Just wanted to make sure before I flash it.
MD5=79d6d107e0baecde597d04715927dbab
Click to expand...
Click to collapse
The MD5 is for the zip file, not the tar.md5.
I hope this helps.
Sent from my SM-N900P using Xparent BlueTapatalk 2

micmars said:
The MD5 is for the zip file, not the tar.md5.
I hope this helps.
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
Thanks

Do you root this the same way as nab with cfroot?

You Can...
oscarthegrouch said:
Do you root this the same way as nab with cfroot?
Click to expand...
Click to collapse
Sure, you could do it that way.
Also, you can flash recovery from Odin, back up, then inject root from TWRP or PhilZ CWM. That would be one of many ways to inject root.
Let me know if you would like links to the files you wish to use.

micmars said:
You can flash recovery from Odin, back up, then inject root from TWRP or PhilZ CWM. That would be one of many ways to inject root.
Let me know if you would like links to the files you wish to use.
Click to expand...
Click to collapse
Look at you go, doin' your parents proud! Running your first thread like a champ! I tried to thank you, but apparently I blew my load of 'em this morning. Not 5 minutes after I posted it was day off did I get called in for an emergency, that's what I get for bragging.

Related

[Firmware|Odin] MJ4 Baseband firmware tar

Here is the MJ4 firmware in a flashable tar. It includes bootloader, modem, baseband, etc.
This will NOT wipe your phone or data. It does not flash a ROM, only the firmware. This will update people to the MJ4 baseband.
hlte SPR Firmwares
Thank You Sir...
freeza said:
Here is the MJ4 firmware in a flashable tar. It includes bootloader, modem, baseband, etc.
This will NOT wipe your phone or data. It does not flash a ROM, only the firmware. This will update people to the MJ4 baseband.
hlte SPR Firmwares
Click to expand...
Click to collapse
Thank you, sir! Just terrific providing this.
micmars said:
Thank you, sir! Just terrific providing this.
Click to expand...
Click to collapse
Much appreciated... Just to confirm though because I'm not logged into androidfilehost;
Is this the mj4firmware.tar you uploaded about a half hour ago?
https://www.androidfilehost.com/?fid=23212708291676766
54.6MB
MD5: 269930fed0e2672940d3b2634a9e37bc
Kompster said:
Much appreciated... Just to confirm though because I'm not logged into androidfilehost;
Is this the mj4firmware.tar you uploaded about a half hour ago?
https://www.androidfilehost.com/?fid=23212708291676766
54.6MB
MD5: 269930fed0e2672940d3b2634a9e37bc
Click to expand...
Click to collapse
Yes
freeza said:
Here is the MJ4 firmware in a flashable tar. It includes bootloader, modem, baseband, etc.
This will NOT wipe your phone or data. It does not flash a ROM, only the firmware. This will update people to the MJ4 baseband.
hlte SPR Firmwares
Click to expand...
Click to collapse
Can you flash this from phone? My computer is broke right now...
xyojimbox said:
Can you flash this from phone? My computer is broke right now...
Click to expand...
Click to collapse
I'm sure you can flash it with Mobile Odin, but it's not a recovery flashable.
Careful with mobile Odin. Last time I tried bit with a modem it didn't work so well. Had to reflash whole tar from desktop to get phone back in working order. Unless they fixed it since then.
Note 3 or Gear Sent
freeza said:
I'm sure you can flash it with Mobile Odin, but it's not a recovery flashable.
Click to expand...
Click to collapse
Says phone is not supported and I don't have external sd . Any plans in future to make this a zip?
xyojimbox said:
Says phone is not supported and I don't have external sd . Any plans in future to make this a zip?
Click to expand...
Click to collapse
Same here with mobile odin. Guess ill just stop being lazy and boot up the pc lol
Sent from my SM-N900P using xda app-developers app
Just to be sure since I havent flashed firmware via odin in a really long time, what slot do we put this in PDA?
BlGPAPA1321 said:
Same here with mobile odin. Guess ill just stop being lazy and boot up the pc lol
Sent from my SM-N900P using xda app-developers app
Click to expand...
Click to collapse
My computer broke so I'm screwed lol
Just flashed and in about phone it still says my baseband is MI3
I believe you need to be on MI5 first. At least that's what I seen a lot from other people before u can go to MJ4. Don't kill me if I'm wrong
Sent from my SM-N900P using xda app-developers app
rbtrucking said:
Just flashed and in about phone it still says my baseband is MI3
Click to expand...
Click to collapse
Did Odin say it was successful?
Confirming that an Odin from MI5 booted right back up into my rom with Software and Baseband MJ4.
Thanks freeza. You're like the Robin Hood of firmware.
freeza said:
Did Odin say it was successful?
Click to expand...
Click to collapse
Yes it did. Maybe I should try it again, perhaps use a regular usb 2.0 cable? For some reason this 3.0 cable doesnt get along to well with my computer. First time rooting it I almost bricked it because it kept failing then I got the firmware upgeade encountered an error message when trying to boot my phone up but luckily finally it worked and all was well.
I am supposed to be putting this in the PDA slot of odin and leaving the file zipped exactly as it was when I downloaded it, correct?
rbtrucking said:
Yes it did. Maybe I should try it again, perhaps use a regular usb 2.0 cable? For some reason this 3.0 cable doesnt get along to well with my computer. First time rooting it I almost bricked it because it kept failing then I got the firmware upgeade encountered an error message when trying to boot my phone up but luckily finally it worked and all was well.
I am supposed to be putting this in the PDA slot of odin and leaving the file zipped exactly as it was when I downloaded it, correct?
Click to expand...
Click to collapse
The stock cable should be adequate if not good quality. Compared to the Epic 4G and cable for that I had before...
Flash .zips. Odin .tars .tar.md5 .pit or whatever it is properly. Make sure you have the correct .tar in the pda slot and use an updated version of Odin3 (3.04) and leave all the default settings as is, aside from the PDA .tar, hit start.
Edit: Also make sure to check the MD5, maybe you got a corrupt download.
Kompster said:
The stock cable should be adequate if not good quality. Compared to the Epic 4G and cable for that I had before...
Flash .zips. Odin .tars .tar.md5 .pit or whatever it is properly. Make sure you have the correct .tar in the pda slot and use an updated version of Odin3 (3.04) and leave all the default settings as is, aside from the PDA .tar, hit start.
Edit: Also make sure to check the MD5, maybe you got a corrupt download.
Click to expand...
Click to collapse
Still didnt work. Do I need to be on MI5 like you suggested earlier for this to work?
I wonder if we can pull the MI5 stock keyboard and replace it with the MJ4 to get the gray colored keyboard back
BrianBaker said:
I wonder if we can pull the MI5 stock keyboard and replace it with the MJ4 to get the gray colored keyboard back
Click to expand...
Click to collapse
Yeah, you can.

4.4.4 link

Does anyone have a working 4.4.4 download link?
Sent from my SM-N900P using XDA Free mobile app
There is a link in this thread
http://forum.xda-developers.com/note-3-sprint/general/4-4-4-inbound-t2871557
page 5 or so I posted the md5 of what downloaded here when my phone pulled the update. So if that link posted in the thread has matching md5 I'd say the file is good.
idone said:
There is a link in this thread
http://forum.xda-developers.com/note-3-sprint/general/4-4-4-inbound-t2871557
page 5 or so I posted the md5 of what downloaded here when my phone pulled the update. So if that link posted in the thread has matching md5 I'd say the file is good.
Click to expand...
Click to collapse
The file that Omar04 posted is definitely corrupt. I tried many different way to open and fix. So someone else will have to post it. I will soon as I get the update.
Sent from my SM-N900P using Tapatalk
Go and check the md5 from @Omar04 upload and see if it matches the one I posted.
Everyone that's tried to extract the update that their phone has downloaded has had the same issue.
idone said:
md5 I got for update is:
D2EC5D31A1F786CA7E95D7FF63D9893C
unpacks \update\META-INF\com\android\metadata with contents of
Code:
post-build=samsung/hltespr/hltespr:4.4.4/KTU84P/N900PVPUDNH7:user/release-keys
post-timestamp=1409206131
pre-build=samsung/hltespr/hltespr:4.4.2/KOT49H/N900PVPUCNC5:user/release-keys
pre-device=hltespr
Then overwrites this file with an over 2mb elf file of the same name.
I'm thinking that binary takes care of the rest of the unpacking..? It would seem so I guess.
Click to expand...
Click to collapse
I downloaded the OTA, but when I reboot it fails in updating. I am on rooted stock nc5 with an engineering bootloader. what do I have to do to get the update? my knox is tripped already.
Johnabis said:
I downloaded the OTA, but when I reboot it fails in updating. I am on rooted stock nc5 with an engineering bootloader. what do I have to do to get the update? my knox is tripped already.
Click to expand...
Click to collapse
You need to Odin stock NC5 bootloader then flash back to 100% unrooted stock.
Sent from my SM-N900P using Tapatalk
JonSCSL said:
You need to Odin stock NC5 bootloader then flash back to 100% unrooted stock.
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Thanks for the quick responce. I had the engineering bootloader as I could not find the stock bootloader. with that said I can just unroot using super user again I take it? i'm a noob as i'm sure you can tell by now.
Thanks,
John
Johnabis said:
Thanks for the quick responce. I had the engineering bootloader as I could not find the stock bootloader. with that said I can just unroot using super user again I take it? i'm a noob as i'm sure you can tell by now.
Thanks,
John
Click to expand...
Click to collapse
No you need to flash the stock bootloader. https://www.dropbox.com/s/tef6vr2iuieasqq/NC5_OEM_BL.tar.md5?dl=0
Then flash stock Unrooted NC5 because the update will still see that you were modified and not stock. There is two places to look if you are official. 1st place is under settings about phone. The other place is in download mode. If both places don't say official or Samsung Official then it won't update. Here is a stock one click nc5 rom. http://forum.xda-developers.com/showthread.php?p=51848277
Sent from my SM-N900P using Tapatalk
JonSCSL said:
No you need to flash the stock bootloader. https://www.dropbox.com/s/tef6vr2iuieasqq/NC5_OEM_BL.tar.md5?dl=0
Then flash stock Unrooted NC5 because the update will still see that you were modified and not stock. There is two places to look if you are official. 1st place is under settings about phone. The other place is in download mode. If both places don't say official or Samsung Official then it won't update. Here is a stock one click nc5 rom. http://forum.xda-developers.com/showthread.php?p=51848277
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Thanks, i'll flash the bootloader first (hitting bootloader icon in odin) then the nc5 rom next (hitting pda in odin). the last question is when I flash nc5 rom i won't actually lose anything right? such as my current config or files.
Thanks,
John
First thing I forgot. In order for the bootloader to stick do a cold boot into download mode. To do that completely shut off phone the wait about 30 seconds after the button lights turn off then hold power+home+volume down button at the same time until you see the Samsung logo.
And about the one click I would back up everything! You might loose stuff. Can't promise. I used the one click earlier and didn't loose anything. But you I took a chance. I also made a nandroid backup.
Sent from my SM-N900P using Tapatalk

[Baseband/Modem] NH7 Odin flashable

Hey guys, here's an Odin flashable of the NH7 modem, for those who wish to remain on their current setup but still benefit from having the new baseband.
The steps to flash this are as follows (make sure you have the Samsung mobile drivers installed so that your phone can be recognized by Odin):
-Disconnect your phone from the PC, if it's connected.
-Completely power down your phone, not reboot, or boot into download mode, but power down.
-Power back on your phone into download mode (vol+down,power,home)
-Open Odin (3.04/3.09) and connect your phone to the PC. At this point, Odin shoudl say <<Added>> or something of the sort.
-Uncheck "auto reboot" from Odin.
-Load up this NH7 baseband tar image into the PDA (3.04) or AP(?) (3.09) section of Odin, and flash.
-Once complete, disconnect your phone, remove the battery for around 5-10 seconds, then power your phone back on into download mode.
-Check "auto reboot" from Odin.
-Flash again, then let your phone auto reboot back into android.
-You should either receive an "android has been upgraded" message or you can verify you're on the new baseband by checking settings>about
-Profit
Note: Steps were taken from the unlock thread in general.
Download NH7 baseband/modem: Here
Thanks for this
Sent from my SM-N900P using Tapatalk
Awesome!
Mobile Odin
Thanks for this Freeza! Can I use this with mobile Odin?? I don't have a windows computer (Zorin (umbuntu)). Thanks again for all of your awesome work sir.
Note: Steps were taken from the unlock thread in general.
Download NH7 baseband/modem: Here[/QUOTE]
I'm trying to flash this through Odin 3.07 and keep getting md5 invalid, any suggestions? Redownloaded 3 times and still a no go. Thanks
Sweet! Thx..
Sent from my SM-N900P using XDA Free mobile app
rogerandgina said:
I'm trying to flash this through Odin 3.07 and keep getting md5 invalid, any suggestions? Redownloaded 3 times and still a no go. Thanks
Click to expand...
Click to collapse
Same here...
rogerandgina said:
I'm trying to flash this through Odin 3.07 and keep getting md5 invalid, any suggestions? Redownloaded 3 times and still a no go. Thanks
Click to expand...
Click to collapse
Hmm maybe a bad upload. Let me do it again
freeza said:
Hmm maybe a bad upload. Let me do it again
Click to expand...
Click to collapse
Just wondering if you have the new upload uploaded?
rogerandgina said:
Just wondering if you have the new upload uploaded?
Click to expand...
Click to collapse
I just downloaded the tar file and tried changing the filename by removing .md5, leaving just the .tar extension. Odin started
but failed
I think the answer to your question is no
yep
no go
Has there been any benifits found in the new update? I
Sent from my SM-N900P using Xparent Skyblue Tapatalk 2
OP updated... I posting a different link, same file. I've had one person post success with it, so it was probably either a bad upload or my site not completing downloads.
@freeza sup bud. I have a question if I have mobile Odin and flash this will it affect my phone while I'm on NC5 or update the baseband then flash the stock rooted NH7 rom then reboot
Still a no go with updated op.
screenshot of what im getting
pancho8188 said:
no go
Click to expand...
Click to collapse
here is what im getting
Jocutz1987 said:
@freeza sup bud. I have a question if I have mobile Odin and flash this will it affect my phone while I'm on NC5 or update the baseband then flash the stock rooted NH7 rom then reboot
Click to expand...
Click to collapse
Unless Mobile Odin had changed recently, I believe that modems are about the only thing it won't flash correctly. PC Odin is the way to go for modem flashes (until someone puts together recovery flashable modem).
pancho8188 said:
here is what im getting
Click to expand...
Click to collapse
Strange.....one of my buddies was able to update it just fine.
I'll just go ahead and redo it.
freeza said:
OP updated... I posting a different link, same file. I've had one person post success with it, so it was probably either a bad upload or my site not completing downloads.
Click to expand...
Click to collapse
Worked for me.
Shows up in settings NH7 baseband
Works for me.
Sent from my SM-N900P using Tapatalk

Deleted... Close Thread

xxDeletedxx Sorry guys
Goat1378 said:
I pulled this from the new 4.4.4 NK4/N900PVPUDNK4_SPR zip
Its just baseband. Odin flashable tar file.
Do the following and you should be good.
1) download the NK4 tar file from the link below.
2)Power your device down completely using the 3 button combo (Power,Volume down,Home button.
3)Fire up Odinv3.09 UNCHECK auto reboot and load your tar into slot AP and hit start.
4)After it does its thing and shows its done unplug your usb cord and pull your battery.
5)Leave your battery out for 10sec. and put it back in.
6)Use your 3 button combo once more to boot into Download mode.
7)This time make sure to check auto reboot.
8)Load the same tar file again and flash.
After its done you should be good to go. Basically I'm just using the steps suggested by freeza on the NH7 Baseband update. So give that guy thanks too while your at it.
Heres a link to the full release of NK4 when it was brought to us by shadowcliffs http://forum.xda-developers.com/note-3-sprint/general/stock-rom-n900pvpudnk4-released-t2987901 to see what all the fuss is about. Give shadowcliffs thanks for bring this to us when you get over there and any of the other guys if you find there info useful.
NK4 (Modem only) https://www.androidfilehost.com/?fid=95887005526788421
NK4 (Full Update) https://www.androidfilehost.com/?fid=95887005526788395
If i missed any steps anyone feel free to correct me. HAPPY MODDING!!!!!!!!
Click to expand...
Click to collapse
Is their a NK4 flashable kernel zip floating around anywhere yet ?
Alright Goat.. Thank you for this..
In the past, at least on my former Nexus devices, I was able to just flash new radios via a zip in recovery without needing to go home and hook up to my PC to use Odin - is that possible with the Note 3 as well?
I'm at work and would love to just download the radio and update in recovery if possible.
chico260 said:
Is their a NK4 flashable kernel zip floating around anywhere yet ?
Click to expand...
Click to collapse
I will try and pull it from the update and zip it up and post here in a bit.
Does anyone know of a flashable through recovery zip for the modem? I'm currently without a computer. Thanks in advance.
rogerandgina said:
Does anyone know of a flashable through recovery zip for the modem? I'm currently without a computer. Thanks in advance.
Click to expand...
Click to collapse
You can't flash the modem in recovery.
Goat1378 said:
You can't flash the modem in recovery.
Click to expand...
Click to collapse
I thought there was a way if packaged right.
rogerandgina said:
I thought there was a way if packaged right.
Click to expand...
Click to collapse
I thought so too...
22stars said:
I thought so too...
Click to expand...
Click to collapse
There might be a way but I'm no developer and I'm not gonna pack it without knowing what I'm doing. I've never seen a recovery flashable modem. Not saying theres not a such thing. But I done know how. Sorry. I'm sure if its possible someone will make it.
Link
Does anyone have an active link for the modem only? Please and thanks.
njspank said:
Does anyone have an active link for the modem only? Please and thanks.
Click to expand...
Click to collapse
Is it not working? Try it again.
I just downloaded for later tonight and it worked for me
Goat1378 said:
Is it not working? Try it again.
Click to expand...
Click to collapse
Hey Goat, I don't know nuthin, but shouldn't the tar.md5 file contain a .img file instead of a .bin file?
But again, I don't know nuthin..
oldjackbob said:
Hey Goat, I don't know nuthin, but shouldn't the tar.md5 file contain a .img file instead of a .bin file?
But again, I don't know nuthin..
Click to expand...
Click to collapse
I'm not entirely sure but if you want an image I got an image for you! Lol jk . Not not really sure . I dl the nh7 to see what it had in it. Did it not work? Ill get it rite sooner or later.
oldjackbob said:
Hey Goat, I don't know nuthin, but shouldn't the tar.md5 file contain a .img file instead of a .bin file?
But again, I don't know nuthin..
Click to expand...
Click to collapse
I just downloaded this from freezas nh7 baseband and this is whats inside. Which is what i had at first.
So now im lost in the game. Cuz someone told to that just the modem bin worked.??????
Goat1378 said:
I'm not entirely sure but if you want an image I got an image for you! Lol jk . Not not really sure . I dl the nh7 to see what it had in it. Did it not work? Ill get it rite sooner or later.
Click to expand...
Click to collapse
No sir, didn't work for me but I'm not using the recommended route, I'm using Mobile Odin Pro.
When I open Philz Touch tar.md5 file (which contains a recovery.img file) from inside Mobile Odin, it recognizes that it's a recovery partition image and "pre-loads" it into that partition slot for flashing. But when I open the nk4 baseband tar.md5 file (which contains a modem.bin file) in Mobile Odin it says "Partition could not be found in file".
oldjackbob said:
No sir, didn't work for me but I'm not using the recommended route, I'm using Mobile Odin Pro.
When I open Philz Touch tar.md5 file (which contains a recovery.img file) from inside Mobile Odin, it recognizes that it's a recovery partition image and "pre-loads" it into that partition slot for flashing. But when I open the nk4 baseband tar.md5 file (which contains a modem.bin file) in Mobile Odin it says "Partition could not be found in file".
Click to expand...
Click to collapse
I do know we couldnt use moblie odin to flash nh7 cuz i tried.
Goat1378 said:
I do know we couldnt use moblie odin to flash nh7 cuz i tried.
Click to expand...
Click to collapse
Fair enough, like I said, I don't know nuthin, so y'all prolly shouldn't be paying much attention to me, lol.
But I'm still wondering, has anyone had any success flashing the NK4 baseband yet?
I
oldjackbob said:
Fair enough, like I said, I don't know nuthin, so y'all prolly shouldn't be paying much attention to me, lol.
But I'm still wondering, has anyone had any success flashing the NK4 baseband yet?
Click to expand...
Click to collapse
Yeah someone else did from from someone else that posted the baseband. Not sure who. Screen shot of whats in the update.

(ROM)(ODIN)OC5 stcock firmware tar

Hey Guys and Gals:So I was able to pull the new OC5 TAR file from Samsung Kies and tough of shearing it with you
Here is the stock tar for OC5.
Recommended steps:
-Download file, unzip file to extract full tar.md5 file
-Load PC Odin (right-click on file, select "Run as Administrator")
-Unplug your phone from the computer (if plugged in)
-Completely power down your phone
-Boot into download mode (Volume Down+Power+Home)
-Plug your phone into the computer
-Load tar.md5 file into PDA slot in Odin
-Flash stock rom
DOWNLOAD LINKS:
MEGA:https://mega.co.nz/#!ZVBA0YjB!w4ymFFaRqwZZ620oX9hgwkZcoyJT0s7l31bhAHa4AIQ
GDRIVE:https://drive.google.com/file/d/0BxYsU5Xb_krEbkVNTXd6X3hPSlU/view?usp=sharing
ODIN(just in case some one need's it):http://odindownload.com/
Thanks for sharing. :good:
Sweet thank you so much this is going to come in handy
rlmiller said:
Sweet thank you so much this is going to come in handy
Click to expand...
Click to collapse
Hey Miller,are we going to get a rom out of this since the tar is out?
You bet.......soon
Yeah no problem I just want to see a good lollipop rom and I bet sac will come out with that!!!
How did you finally get it if I may ask? I know a lot of people were trying lol.
Sent from my SM-N900P using XDA Free mobile app
It's different to pull the tar file than the update.zip i try to pull the update.zip several times but it would get corrupted then I found out how to get the tar file and believe me it's a little complicated but I managed to get it for all of you!!!!
Has anyone tried to odin this yet? Does it truly work? Im at work and cant try it out. Anyone lmk. Thx
Hec1N1 said:
Has anyone tried to odin this yet? Does it truly work? Im at work and cant try it out. Anyone lmk. Thx
Click to expand...
Click to collapse
Yes, Odined it last night..Works great!
Jairsantana said:
Yeah no problem I just want to see a good lollipop rom and I bet sac will come out with that!!!
Click to expand...
Click to collapse
Thanks for sharing :good: :good: :good:
This will be done when I get home I hate base roll ups.a nice clean tar flash is where it's at..
Sent from my 0x1 Note 3...... I love tep
kaos420 said:
This will be done when I get home I hate base roll ups.a nice clean tar flash is where it's at..
Sent from my 0x1 Note 3...... I love tep
Click to expand...
Click to collapse
I hope we can get some fast kernels soon, I tried 2 and they wern't great, now I'm back to stock again.
I tried it 3 times each on 2 different devices using Odin 3.09 and each time it fails during the system write process. However, I tried the NK4 tar file and it worked no problem. Is it just me?
travisw0204 said:
I tried it 3 times each on 2 different devices using Odin 3.09 and each time it fails during the system write process. However, I tried the NK4 tar file and it worked no problem. Is it just me?
Click to expand...
Click to collapse
That happened to me as well..Then I installed the newest Samsung drivers and it worked.
Using it now too. Nice to have working data on lollipop
Sent from my SM-N900P using XDA Free mobile app
baseband still NH7
sorico said:
baseband still NH7
Click to expand...
Click to collapse
No
Its a tar it's oc5
Sent from my 0x1 Note 3...... I love tep
Ap: N900pvpueoc5
cp: N900pvpudnh7
csc: N900pspteoc5
sorico said:
Ap: N900pvpueoc5
cp: N900pvpudnh7
csc: N900pspteoc5
Click to expand...
Click to collapse
Try pulling your battery then going to DL mode from totally powered off. May take a couple flashes to stick as well.

Categories

Resources