Related
First, a HUGE thanks goes to @garwynn for being my partner through all of this and then to @sfhub for teaching me how to create an Odin One-Click.exe, @freeza for posting the original TAR this is based off of, @MoHoGalore for helping test and put together so many of these one-clicks and to everyone else in our community who makes this possible!
Second, I was asked to make this one-click to help simplify the process of restoring a stock factory build for our Note 3 users. I do not own a Note 3 so I have not been able to test this as I would normally prefer to do before releasing. I do however feel comfortable that it should work as designed. Due to the fact that we do not have a Note 3 to be testing it on, at this time neither myself or Garwynn are planning on releasing a rooted One-Click. There is a lot more risk involved when building the rooted versions and we don't want to take that risk with other people's phones.
This Odin One-Click.exe contains the Stock SM-N900P NAB Bootloader, Kernel, Modem and ROM for the Sprint Samsung Galaxy Note 3 (SM-N900P). Yes, that means this comes with the full Knox Bootloader.
There has been no change to the ROM from the initial build released by Samsung.
This will NOT trigger the Yellow Triangle NOR will it increment the Odin flash count.
This one-click resets your whole phone to the stock NAB experience, similar to a factory restore and it will probably wipe all data. It also contains the full bootloader and Knox.
Instructions:
1: Backup anything important and Disable any PINs.
During this process your phone's software will be returned to the Stock setup. All system data will be lost. To be safe, it is best to archive your backup off your phone, ie on your PC or Dropbox.
2: Install Samsung USB/Android drivers (if necessary).
Samsung Drivers Download Link
3: Download the NAB Stock ROM One-Click.
SM-N900P NAB Full Restore Unrooted (Compressed Archive).exe (Resets user data)
4: Unzip One-Click ROM using 7zip (this package is a self-extracting exe you should just be able to double-click on it after download and it will do the rest).
5: Start the Odin One-Click.
Navigate to the location where the "SPH-N900 NAB Full Restore (Unrooted).exe" was saved upon extract from the 7Zip archive.
Double-click on "SPH-N900 NAB Full Restore (Unrooted).exe". *On Vista or newer, you may need to right-click on the file and Run as Administrator.
6: Place phone in Download Mode.
- Power phone completely off.
- Press and hold Volume Down, Home and Power buttons, all at the same time.
- Release the buttons only when the ‘Warning!!’ message appears.
- Press [Volume Up] to enter Download mode.
7: Connect USB cable to PC and phone.
Odin should show a yellow COM port in the second column. If you do not see a yellow COM port, you may need to run the Odin One-Click as Administrator and/or unplug/plugin the USB cable after starting Odin One-Click.
8: Start Odin flash process.
Press [Start].
9: Complete - PASS!
Status should change to green PASS! At this point your phone should automatically reboot.
Android Instructions:
Download and install ZArchiver on your phone. Use it to unpack the Odin One-Click 7zip self-extracting exe file (long press on the 7zip exe. Select "Open As Archive". Select the One-Click.exe and then select Extract). Use Mobile Odin to Open File on the "SPH-N900 NAB Full Restore (Unrooted).exe". FYI - Modem will not flash with Mobile Odin.
The boot process will take slightly longer than usual during which time you'll see the Sprint 4G logo screen.
Congratulations! You've flashed the Factory Restore NAB build!
XDA:DevDB Information
[ROM][ODIN] SM-N900P NAB (NAB Modem/Kernel/Bootloader/ROM - Full Restore - Unrooted), ROM for the Sprint Samsung Galaxy Note 3
Contributors
rwilco12
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2015-02-12
Last Updated 2015-02-12
Download Link: http://www.rwilco12.com/forum/showthread.php?tid=93
Additional Resources:
7-Zip v9.20
Odin3 v3.04
ZArchiver
Mobile Odin Lite
Samsung USB Drivers
Nice, excellent~!! :good:
Hey rwilco12, long time no see. Thanks for this, and all you do for the community
Sent from my SM-N900P
Second! Third! Grabbing now!
rwilco12 said:
First, a HUGE thanks goes to @garwynn for being my partner through all of this and then to @sfhub for teaching me how to create an Odin One-Click.exe, @freeza for posting the original TAR this is based off of, @MoHoGalore for helping test and put together so many of these one-clicks and to everyone else in our community who makes this possible!
Second, I was asked to make this one-click to help simplify the process of restoring a stock factory build for our Note 3 users. I do not own a Note 3 so I have not been able to test this as I would normally prefer to do before releasing. I do however feel comfortable that it should work as designed. Due to the fact that we do not have a Note 3 to be testing it on, at this time neither myself or Garwynn are planning on releasing a rooted One-Click. There is a lot more risk involved when building the rooted versions and we don't want to take that risk with other people's phones.
This Odin One-Click.exe contains the Stock SPH-N900P NAB Bootloader, Kernel, Modem and ROM for the Sprint Samsung Galaxy Note 3 (SPH-N900P). Yes, that means this comes with the full Knox Bootloader.
There has been no change to the ROM from the initial build released by Samsung.
This will NOT trigger the Yellow Triangle NOR will it increment the Odin flash count.
This one-click resets your whole phone to the stock NAB experience, similar to a factory restore and it will probably wipe all data. It also contains the full bootloader and Knox.
Instructions:
1: Backup anything important and Disable any PINs.
During this process your phone's software will be returned to the Stock setup. All system data will be lost. To be safe, it is best to archive your backup off your phone, ie on your PC or Dropbox.
2: Install Samsung USB/Android drivers (if necessary).
Samsung Drivers Download Link
3: Download the NAB Stock ROM One-Click.
SPH-N900P NAB Full Restore Unrooted (Compressed Archive).exe (Resets user data)
4: Unzip One-Click ROM using 7zip (this package is a self-extracting exe you should just be able to double-click on it after download and it will do the rest).
5: Start the Odin One-Click.
Navigate to the location where the "SPH-N900 NAB Full Restore (Unrooted).exe" was saved upon extract from the 7Zip archive.
Double-click on "SPH-N900 NAB Full Restore (Unrooted).exe". *On Vista or newer, you may need to right-click on the file and Run as Administrator.
6: Place phone in Download Mode.
- Power phone completely off.
- Press and hold Volume Down, Home and Power buttons, all at the same time.
- Release the buttons only when the ‘Warning!!’ message appears.
- Press [Volume Up] to enter Download mode.
7: Connect USB cable to PC and phone.
Odin should show a yellow COM port in the second column. If you do not see a yellow COM port, you may need to run the Odin One-Click as Administrator and/or unplug/plugin the USB cable after starting Odin One-Click.
8: Start Odin flash process.
Press [Start].
9: Complete - PASS!
Status should change to green PASS! At this point your phone should automatically reboot.
Android Instructions:
Download and install ZArchiver on your phone. Use it to unpack the Odin One-Click 7zip self-extracting exe file (long press on the 7zip exe. Select "Open As Archive". Select the One-Click.exe and then select Extract). Use Mobile Odin to Open File on the "SPH-N900 NAB Full Restore (Unrooted).exe". FYI - Modem will not flash with Mobile Odin.
The boot process will take slightly longer than usual during which time you'll see the Sprint 4G logo screen.
Congratulations! You've flashed the Factory Restore NAB build!
Click to expand...
Click to collapse
thanks also does anyone know if i use this to go all the way to stock will the engineer boot loader still intall after this?
xoreactionzox said:
thanks also does anyone know if i use this to go all the way to stock will the engineer boot loader still intall after this?
Click to expand...
Click to collapse
It should, I can't think of a reason, why it wouldn't.
Sent from my SM-N900P
ok just making sure bc im on mj4 now and want to go back to stock an to the new nab my only concern was i know u cant really downgrade the bootloader which both are nab so i figured it should work just fine thank
as usual @rwilco12, you're six kinds of awesome! thanks man!
(also, nice to see you over here!)
rwilco12 said:
Download Link: http://www.rwilco12.com/forum/showthread.php?tid=93
Additional Resources:
7-Zip v9.20
Odin3 v3.04
ZArchiver
Mobile Odin Lite
Samsung USB Drivers
Click to expand...
Click to collapse
Any plans to (be an idiot like me)? Certainly hope not!
EDIT: ooops, should have read all the way through! Never mind my garbage! Cleaned!
Sent from my calculator watch.
Can I do this from JellyBomb? Or do I need to be stock first?
Sent from my SM-N900P using Xparent Skyblue Tapatalk 2
kingdazy said:
as usual @rwilco12, you're six kinds of awesome! thanks man!
(also, nice to see you over here!)
Click to expand...
Click to collapse
What's past is prologue; what to come, in yours and my discharge...
Yeah, this is way awesome for all of the right reasons.
Exciting times for our community.
Sent from my SM-N900P using Xparent BlueTapatalk 2
fatboypup said:
Can I do this from JellyBomb? Or do I need to be stock first?
Sent from my SM-N900P using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
I don't see why you wouldn't be able to but I'll let some of our N3 owners chime in just in case.
rwilco12 said:
I don't see why you wouldn't be able to but I'll let some of our N3 owners chime in just in case.
Click to expand...
Click to collapse
ill let you know in a few minutes im going to take the plunge:victory::victory
kingdazy said:
Any plans to (be an idiot like me)? Certainly hope not!
EDIT: ooops, should have read all the way through! Never mind my garbage! Cleaned!
Sent from my calculator watch.
Click to expand...
Click to collapse
Lol someone got caught not reading the OP!
I'm not saying we won't do a rooted one but it's not in the cards right now. There's too many things that could go wrong and we just don't feel comfortable doing them without a device to test it on. We'll see what the future brings though!
worked fine coming from 4.3 Jellybomb rom didnt wipe data either
How to root after I install this? Thanks.
2kmy477 said:
How to root after I install this? Thanks.
Click to expand...
Click to collapse
http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
Saved the day.
I don't know what I did wrong, I flashed the engineered bootloader, Freeza's "stockish" NABD and it worked (sorta). Phone was freezing about every 3 minutes, wifi wouldn't remember my connection info, and the baseband was still showing MJ4. I wasn't panicked yet, but I was feeling pretty stupid about my lack of patience. You have no idea how comforting it was to see your thread.
Everything worked fine. Lost root, but it didn't wipe data (a good thing as it turned out). Easily re-rooted and phone hasn't froze or rebooted once since flashing.
Thanks for the effort. Much appreciated. This is a great alternative for anyone that hasn't already flashed, or missed a step somewhere and wasn't totally sure where to start to correct.
Thank You!
fatboypup said:
worked fine coming from 4.3 Jellybomb rom didnt wipe data either
Click to expand...
Click to collapse
The OP says that this will probably wipe data. Can anyone else confirm that this DOESN'T wipe data?
Hey Guys and Gals:
Here is the stock tar for NH7.
Recommended steps:
-Download file, unzip file to extract full tar.md5 file
-Load PC Odin (right-click on file, select "Run as Administrator")
-Unplug your phone from the computer (if plugged in)
-Completely power down your phone
-Boot into download mode (Volume Down+Power+Home)
-Plug your phone into the computer
-Load tar.md5 file into PDA slot in Odin
-Flash stock rom
Download and MD5:
Download: N900PVPUDNH7_N900PSPTDNH7_N900PVPUDNH7_HOME
MD5=09CDE4B212C1430B48B906BA847813C8
Modem Only here in @freeza thread.
Older TouchWiz KitKat builds:
NC5
NAB
Other Stock Builds (Zipped Tars and One-Clicks):
KitKat
Stock NAB tar here, One-Click here.
JellyBean 4.3
Stock MJ4 tar here, One-Click here.
Tar.Md5 Files
Full stock tar.md5 files for MJ4, NAB, NC5 and NH7 here.
Thanks a lot for this! You're the man @micmars
Sent from my SM-N900P using xda app-developers app
Thanks for this micmars, this should come in handy
Sent from my SM-N900P using Tapatalk
micmars said:
Hey Guys and Gals:
Here is the stock tar for NC5.
Recommended steps:
-Download file, unzip file to extract full tar.md5 file
-Load PC Odin (right-click on file, select "Run as Administrator")
-Unplug your phone from the computer (if plugged in)
-Completely power down your phone
-Boot into download mode (Volume Down+Power+Home)
-Plug your phone into the computer
-Load tar.md5 file into PDA slot in Odin
-Flash stock rom
Download and MD5:
Download: N900PVPUCNC5_N900PSPTCNC5_N900PVPUCNC5_HOME
MD5=5E10DD0A690455E8FB8F13111F35A054
Click to expand...
Click to collapse
Thank you :good:
@micmars
Does having this file change your instructions (link) if coming from MJ4 and wanting rooted NC5?
runner77 said:
@micmars
Does having this file change your instructions (link) if coming from MJ4 and wanting rooted NC5?
Click to expand...
Click to collapse
Since this is an Odin Tar, I would have to say yes. Just follow the instructions in the OP and you should be fine. Nice to see @micmars as the OP, why not, he's everywhere!
Was wondering .. is it mandatory to use the USB 3.0 outta the box cord with our device when flashing with odin? Or are we good as long as Odin recognizes our device. .. and a huge "THANK YOU" micmars
Sent from my SM-N900P using Tapatalk
chico260 said:
Was wondering .. is it mandatory to use the USB 3.0 outta the box cord with our device when flashing with odin? Or are we good as long as Odin recognizes our device. .. and a huge "THANK YOU" micmars
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
I haven't even taken that cable out of the box, Odin'ed many times. I don't have USB 3 on my puter.
My Man!
Thanks @micmars. Is it best to flash this first before flashing another NC5 rom to get all the firmware updated or could I go straight to another NC5 rom. Im already on NABD
mta1981 said:
Thanks @micmars. Is it best to flash this first before flashing another NC5 rom to get all the firmware updated or could I go straight to another NC5 rom. Im already on NABD
Click to expand...
Click to collapse
Look at this like taking the OTA, you should Odin this first to get your modem, baseband, and other firmware up to date. Then your phone will be ready for the NC5 ROMS without issue.
SanityBroken said:
Look at this like taking the OTA, you should Odin this first to get your modem, baseband, and other firmware up to date. Then your phone will be ready for the NC5 ROMS without issue.
Click to expand...
Click to collapse
Excellent, thats what I figured, thanks!!!!
SanityBroken said:
Since this is an Odin Tar, I would have to say yes. Just follow the instructions in the OP and you should be fine. Nice to see @micmars as the OP, why not, he's everywhere!
Click to expand...
Click to collapse
Thanks for your kind words, and for helping out with questions (I really wish I could get more time on the forums during the day and have my boss paying for it, such joy).
It's actually my first thread. Odd, that.
Sent from my SM-N900P using Xparent BlueTapatalk 2
micmars said:
Thanks for your kind words, and for helping out with questions (I really wish I could get more time on the forums and have my boss paying for it).
It's actually my first thread. Odd, that.
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
It's my day off, glad to help.
micmars said:
Hey Guys and Gals:
Here is the stock tar for NC5.
Recommended steps:
-Download file, unzip file to extract full tar.md5 file
-Load PC Odin (right-click on file, select "Run as Administrator")
-Unplug your phone from the computer (if plugged in)
-Completely power down your phone
-Boot into download mode (Volume Down+Power+Home)
-Plug your phone into the computer
-Load tar.md5 file into PDA slot in Odin
-Flash stock rom
Download and MD5:
Download: N900PVPUCNC5_N900PSPTCNC5_N900PVPUCNC5_HOME
MD5=5E10DD0A690455E8FB8F13111F35A054
Click to expand...
Click to collapse
This is what I get for the unzipped tar file, would you please check it out? Just wanted to make sure before I flash it.
MD5=79d6d107e0baecde597d04715927dbab
Ali1353 said:
This is what I get for the unzipped tar file, would you please check it out? Just wanted to make sure before I flash it.
MD5=79d6d107e0baecde597d04715927dbab
Click to expand...
Click to collapse
The MD5 is for the zip file, not the tar.md5.
I hope this helps.
Sent from my SM-N900P using Xparent BlueTapatalk 2
micmars said:
The MD5 is for the zip file, not the tar.md5.
I hope this helps.
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
Thanks
Do you root this the same way as nab with cfroot?
You Can...
oscarthegrouch said:
Do you root this the same way as nab with cfroot?
Click to expand...
Click to collapse
Sure, you could do it that way.
Also, you can flash recovery from Odin, back up, then inject root from TWRP or PhilZ CWM. That would be one of many ways to inject root.
Let me know if you would like links to the files you wish to use.
micmars said:
You can flash recovery from Odin, back up, then inject root from TWRP or PhilZ CWM. That would be one of many ways to inject root.
Let me know if you would like links to the files you wish to use.
Click to expand...
Click to collapse
Look at you go, doin' your parents proud! Running your first thread like a champ! I tried to thank you, but apparently I blew my load of 'em this morning. Not 5 minutes after I posted it was day off did I get called in for an emergency, that's what I get for bragging.
First, a HUGE thanks goes to @garwynn for being my team mate and working with me on all these projects! Another big thanks to @micmars for posting the original NC5 TAR here.
Second, I was asked to make this one-click to help simplify the process of restoring a stock factory build for our Note 3 users. I do not own a Note 3 so I have not been able to test this as I would normally prefer to do before releasing. I do however feel comfortable that it should work as designed. Due to the fact that we do not have a Note 3 to be testing it on, at this time neither myself or Garwynn are planning on releasing a rooted One-Click. There is a lot more risk involved when building the rooted versions and we don't want to take that risk with other people's phones.
This Odin One-Click.exe contains the Stock SM-N900P NC5 Bootloader, Kernel, Modem and ROM for the Sprint Samsung Galaxy Note 3 (SM-N900P). Yes, that means this comes with the full Knox Bootloader.
There has been no change to the ROM from the initial build released by Samsung.
This will NOT trigger the Yellow Triangle NOR will it increment the Odin flash count.
This one-click resets your whole phone to the stock NC5 experience, similar to a factory restore and it may wipe all data. It also contains the full bootloader and Knox.
Instructions:
1: Backup anything important and Disable any PINs.
During this process your phone's software will be returned to the Stock setup. All system data will be lost. To be safe, it is best to archive your backup off your phone, ie on your PC or Dropbox.
2: Install Samsung USB/Android drivers (if necessary).
Samsung Drivers Download Link
3: Download the NC5 Stock ROM One-Click.
SM-N900P NC5 Full Restore Unrooted (Compressed Archive).exe (Resets user data)
4: Unzip One-Click ROM using 7zip (this package is a self-extracting exe you should just be able to double-click on it after download and it will do the rest).
5: Start the Odin One-Click.
Navigate to the location where the "SM-N900P NC5 Full Restore Unrooted.exe" was saved upon extract from the 7Zip archive.
Double-click on "SM-N900P NC5 Full Restore Unrooted.exe". *On Vista or newer, you may need to right-click on the file and Run as Administrator.
6: Place phone in Download Mode.
- Power phone completely off.
- Press and hold Volume Down, Home and Power buttons, all at the same time.
- Release the buttons only when the ‘Warning!!’ message appears.
- Press [Volume Up] to enter Download mode.
7: Connect USB cable to PC and phone.
Odin should show a yellow COM port in the second column. If you do not see a yellow COM port, you may need to run the Odin One-Click as Administrator and/or unplug/plugin the USB cable after starting Odin One-Click.
8: Start Odin flash process.
Press [Start].
9: Complete - PASS!
Status should change to green PASS! At this point your phone should automatically reboot.
Android Instructions:
Download and install ZArchiver on your phone. Use it to unpack the Odin One-Click 7zip self-extracting exe file (long press on the 7zip exe. Select "Open As Archive". Select the One-Click.exe and then select Extract). Use Mobile Odin to Open File on the "SM-N900P NC5 Full Restore Unrooted.exe". FYI - Modem will not flash with Mobile Odin.
The boot process will take slightly longer than usual during which time you'll see the Sprint 4G logo screen.
Congratulations! You've flashed the Factory Restore NC5 build!
XDA:DevDB Information
[ROM][ODIN] SM-N900P NC5 (NC5 Modem/Kernel/Bootloader/ROM - Full Restore - Unrooted), ROM for the Sprint Samsung Galaxy Note 3
Contributors
rwilco12
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2015-02-09
Last Updated 2015-02-09
Download Link: http://www.rwilco12.com/forum/showthread.php?tid=621
rwilco12 said:
Download Link: http://www.rwilco12.com/forum/showthread.php?tid=621
Click to expand...
Click to collapse
I will be flashing this in about and hour and will let you know how it goes.
Thanks for all the hard work!
EDIT: Worked like a charm, no issues, no problems.
Question: Is there a root method for NC5? or a stock rooted one?
piizzadude said:
I will be flashing this in about and hour and will let you know how it goes.
Thanks for all the hard work!
EDIT: Worked like a charm, no issues, no problems.
Question: Is there a root method for NC5? or a stock rooted one?
Click to expand...
Click to collapse
We won't be doing a rooted one-click due to issues with Knox. You should be able to root it with any of the existing methods for previous builds.
Sent from my d2lte using Tapatalk
Haven't jumped to nc5 yet. Guess now that this is here I have no excuse.
Sent from my SM-N900P using Tapatalk
so could this be used to upgrade to NC5 from MJ4? Thanx for all the work and info!
Buslova said:
so could this be used to upgrade to NC5 from MJ4? Thanx for all the work and info!
Click to expand...
Click to collapse
Yep. Odin is essentially a drive imaging utility. It takes a pre-built image of a partition and then wipes the existing partition's data and replaces it with the new image. So in theory as long as you have the right partitions setup you could use this to put any device on NC5 (mind you there are no other devices that I know of that share the exact same partition structure with the Sprint N3).
Awesome i was just talking about this yesterday wondering g if there was one in the process of being made
Sent from my SM-N900P using Tapatalk
Anyone have an idea of the easiest way to go from Stock Rooted MJ4 (Knox 0X1) to NC5. I have no problem flashing a custom recovery and Knox is already tripped.
I was thinking of using this full restore to NC5 and then rooting through a more conventional method. Odin a custom recovery, then flash SuperSU through recovery. I think SuperSU will disable Knox.
The other option I was considering was using the instructions in optimummind's thread here: http://forum.xda-developers.com/showthread.php?t=2658315. The only benefit to that is I would not lose my data, but it seems like a lot more work.
Ideas?
I used this and rooted with chainfires method. Pretty easy
Sent from my SM-N900P using Tapatalk
If you have rooted with CF-AUTOROOT and trip Knox to 0x1. Can this method return your rom to factory and erase Knox error reading ?
Sent from my SM-N900P using XDA Premium 4 mobile app
JimmyMPR said:
If you have rooted with CF-AUTOROOT and trip Knox to 0x1. Can this method return your rom to factory and erase Knox error reading ?
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
OK, I started the process, will keep you updated.....
Unroot process tooks about 15 mins, sweet.
All applications were not erased from the phone, apps and data still intact. :laugh:
Root were removed successfully. :good:
Knox Trip Counter still in 0x1.
Excellent work !
JimmyMPR said:
Unroot process tooks about 15 mins, sweet.
All applications were not erased from the phone, apps and data still intact. :laugh:
Root were removed successfully. :good:
Knox Trip Counter still in 0x1.
Excellent work !
Click to expand...
Click to collapse
The only question that I have, is data was not supposed to be erased? Status changed from custom to official and loose root, but Data and downloaded installed apk's still intact on the phone..... Why?
My Software version and Baseband version sill shows NAB. Build number shows NC5 though.
It didn't do a factory reset and all my apps were intact along with my settings.
mrnamster said:
My Software version and Baseband version sill shows NAB. Build number shows NC5 though.
It didn't do a factory reset and all my apps were intact along with my settings.
Click to expand...
Click to collapse
Did you factory reset prior to flashing? And did you flash this from a completely powered off state?
Flash it again. It'll stick.
Sent from my SM-N900P using Xparent BlueTapatalk 2
micmars said:
Did you factory reset prior to flashing? And did you flash this from a completely powered off state?
Flash it again. It'll stick.
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
My Software version and Baseband version shows NC5, Root dissapeared but I didn't do a factory reset. All my apps, Data and settings were intact too.
JimmyMPR said:
My Software version and Baseband version shows NC5, Root dissapeared but I didn't do a factory reset. All my apps, Data and settings were intact too.
Click to expand...
Click to collapse
If you are now all NC5, then enjoy the fact that you didn't lose anything. Root gets nuked due to it but being included.
Now you can remain stock, flash recovery and a pre-rooted rom, or just recovery and the latest root.
Congrats!
Sent from my SM-N900P using Xparent BlueTapatalk 2
micmars said:
Did you factory reset prior to flashing? And did you flash this from a completely powered off state?
Flash it again. It'll stick.
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
That did the trick! Thanks!
I did a factory reset/wipe in TWRP, powered down, booted into Download mode, and flashed.
Everything shows NC5 now in About device.
rwilco12 said:
First, a HUGE thanks goes to @garwynn for being my team mate and working with me on all these projects! Another big thanks to @micmars for posting the original NC5 TAR here.
Second, I was asked to make this one-click to help simplify the process of restoring a stock factory build for our Note 3 users. I do not own a Note 3 so I have not been able to test this as I would normally prefer to do before releasing. I do however feel comfortable that it should work as designed. Due to the fact that we do not have a Note 3 to be testing it on, at this time neither myself or Garwynn are planning on releasing a rooted One-Click. There is a lot more risk involved when building the rooted versions and we don't want to take that risk with other people's phones.
This Odin One-Click.exe contains the Stock SM-N900P NC5 Bootloader, Kernel, Modem and ROM for the Sprint Samsung Galaxy Note 3 (SM-N900P). Yes, that means this comes with the full Knox Bootloader.
There has been no change to the ROM from the initial build released by Samsung.
This will NOT trigger the Yellow Triangle NOR will it increment the Odin flash count.
This one-click resets your whole phone to the stock NC5 experience, similar to a factory restore and it may wipe all data. It also contains the full bootloader and Knox.
Instructions:
1: Backup anything important and Disable any PINs.
During this process your phone's software will be returned to the Stock setup. All system data will be lost. To be safe, it is best to archive your backup off your phone, ie on your PC or Dropbox.
2: Install Samsung USB/Android drivers (if necessary).
Samsung Drivers Download Link
3: Download the NC5 Stock ROM One-Click.
SM-N900P NC5 Full Restore Unrooted (Compressed Archive).exe (Resets user data)
4: Unzip One-Click ROM using 7zip (this package is a self-extracting exe you should just be able to double-click on it after download and it will do the rest).
5: Start the Odin One-Click.
Navigate to the location where the "SM-N900P NC5 Full Restore Unrooted.exe" was saved upon extract from the 7Zip archive.
Double-click on "SM-N900P NC5 Full Restore Unrooted.exe". *On Vista or newer, you may need to right-click on the file and Run as Administrator.
6: Place phone in Download Mode.
- Power phone completely off.
- Press and hold Volume Down, Home and Power buttons, all at the same time.
- Release the buttons only when the ‘Warning!!’ message appears.
- Press [Volume Up] to enter Download mode.
7: Connect USB cable to PC and phone.
Odin should show a yellow COM port in the second column. If you do not see a yellow COM port, you may need to run the Odin One-Click as Administrator and/or unplug/plugin the USB cable after starting Odin One-Click.
8: Start Odin flash process.
Press [Start].
9: Complete - PASS!
Status should change to green PASS! At this point your phone should automatically reboot.
Android Instructions:
Download and install ZArchiver on your phone. Use it to unpack the Odin One-Click 7zip self-extracting exe file (long press on the 7zip exe. Select "Open As Archive". Select the One-Click.exe and then select Extract). Use Mobile Odin to Open File on the "SM-N900P NC5 Full Restore Unrooted.exe". FYI - Modem will not flash with Mobile Odin.
The boot process will take slightly longer than usual during which time you'll see the Sprint 4G logo screen.
Congratulations! You've flashed the Factory Restore NC5 build!
Click to expand...
Click to collapse
rwilco12 great work !!! I have used this twice, with complete success. On the third time, everything seems ok? But, there is no Sprint 4G logo screen. Any ideas as to why? :fingers-crossed:
Does anyone have a working 4.4.4 download link?
Sent from my SM-N900P using XDA Free mobile app
There is a link in this thread
http://forum.xda-developers.com/note-3-sprint/general/4-4-4-inbound-t2871557
page 5 or so I posted the md5 of what downloaded here when my phone pulled the update. So if that link posted in the thread has matching md5 I'd say the file is good.
idone said:
There is a link in this thread
http://forum.xda-developers.com/note-3-sprint/general/4-4-4-inbound-t2871557
page 5 or so I posted the md5 of what downloaded here when my phone pulled the update. So if that link posted in the thread has matching md5 I'd say the file is good.
Click to expand...
Click to collapse
The file that Omar04 posted is definitely corrupt. I tried many different way to open and fix. So someone else will have to post it. I will soon as I get the update.
Sent from my SM-N900P using Tapatalk
Go and check the md5 from @Omar04 upload and see if it matches the one I posted.
Everyone that's tried to extract the update that their phone has downloaded has had the same issue.
idone said:
md5 I got for update is:
D2EC5D31A1F786CA7E95D7FF63D9893C
unpacks \update\META-INF\com\android\metadata with contents of
Code:
post-build=samsung/hltespr/hltespr:4.4.4/KTU84P/N900PVPUDNH7:user/release-keys
post-timestamp=1409206131
pre-build=samsung/hltespr/hltespr:4.4.2/KOT49H/N900PVPUCNC5:user/release-keys
pre-device=hltespr
Then overwrites this file with an over 2mb elf file of the same name.
I'm thinking that binary takes care of the rest of the unpacking..? It would seem so I guess.
Click to expand...
Click to collapse
I downloaded the OTA, but when I reboot it fails in updating. I am on rooted stock nc5 with an engineering bootloader. what do I have to do to get the update? my knox is tripped already.
Johnabis said:
I downloaded the OTA, but when I reboot it fails in updating. I am on rooted stock nc5 with an engineering bootloader. what do I have to do to get the update? my knox is tripped already.
Click to expand...
Click to collapse
You need to Odin stock NC5 bootloader then flash back to 100% unrooted stock.
Sent from my SM-N900P using Tapatalk
JonSCSL said:
You need to Odin stock NC5 bootloader then flash back to 100% unrooted stock.
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Thanks for the quick responce. I had the engineering bootloader as I could not find the stock bootloader. with that said I can just unroot using super user again I take it? i'm a noob as i'm sure you can tell by now.
Thanks,
John
Johnabis said:
Thanks for the quick responce. I had the engineering bootloader as I could not find the stock bootloader. with that said I can just unroot using super user again I take it? i'm a noob as i'm sure you can tell by now.
Thanks,
John
Click to expand...
Click to collapse
No you need to flash the stock bootloader. https://www.dropbox.com/s/tef6vr2iuieasqq/NC5_OEM_BL.tar.md5?dl=0
Then flash stock Unrooted NC5 because the update will still see that you were modified and not stock. There is two places to look if you are official. 1st place is under settings about phone. The other place is in download mode. If both places don't say official or Samsung Official then it won't update. Here is a stock one click nc5 rom. http://forum.xda-developers.com/showthread.php?p=51848277
Sent from my SM-N900P using Tapatalk
JonSCSL said:
No you need to flash the stock bootloader. https://www.dropbox.com/s/tef6vr2iuieasqq/NC5_OEM_BL.tar.md5?dl=0
Then flash stock Unrooted NC5 because the update will still see that you were modified and not stock. There is two places to look if you are official. 1st place is under settings about phone. The other place is in download mode. If both places don't say official or Samsung Official then it won't update. Here is a stock one click nc5 rom. http://forum.xda-developers.com/showthread.php?p=51848277
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Thanks, i'll flash the bootloader first (hitting bootloader icon in odin) then the nc5 rom next (hitting pda in odin). the last question is when I flash nc5 rom i won't actually lose anything right? such as my current config or files.
Thanks,
John
First thing I forgot. In order for the bootloader to stick do a cold boot into download mode. To do that completely shut off phone the wait about 30 seconds after the button lights turn off then hold power+home+volume down button at the same time until you see the Samsung logo.
And about the one click I would back up everything! You might loose stuff. Can't promise. I used the one click earlier and didn't loose anything. But you I took a chance. I also made a nandroid backup.
Sent from my SM-N900P using Tapatalk
Hey guys, here's an Odin flashable of the NH7 modem, for those who wish to remain on their current setup but still benefit from having the new baseband.
The steps to flash this are as follows (make sure you have the Samsung mobile drivers installed so that your phone can be recognized by Odin):
-Disconnect your phone from the PC, if it's connected.
-Completely power down your phone, not reboot, or boot into download mode, but power down.
-Power back on your phone into download mode (vol+down,power,home)
-Open Odin (3.04/3.09) and connect your phone to the PC. At this point, Odin shoudl say <<Added>> or something of the sort.
-Uncheck "auto reboot" from Odin.
-Load up this NH7 baseband tar image into the PDA (3.04) or AP(?) (3.09) section of Odin, and flash.
-Once complete, disconnect your phone, remove the battery for around 5-10 seconds, then power your phone back on into download mode.
-Check "auto reboot" from Odin.
-Flash again, then let your phone auto reboot back into android.
-You should either receive an "android has been upgraded" message or you can verify you're on the new baseband by checking settings>about
-Profit
Note: Steps were taken from the unlock thread in general.
Download NH7 baseband/modem: Here
Thanks for this
Sent from my SM-N900P using Tapatalk
Awesome!
Mobile Odin
Thanks for this Freeza! Can I use this with mobile Odin?? I don't have a windows computer (Zorin (umbuntu)). Thanks again for all of your awesome work sir.
Note: Steps were taken from the unlock thread in general.
Download NH7 baseband/modem: Here[/QUOTE]
I'm trying to flash this through Odin 3.07 and keep getting md5 invalid, any suggestions? Redownloaded 3 times and still a no go. Thanks
Sweet! Thx..
Sent from my SM-N900P using XDA Free mobile app
rogerandgina said:
I'm trying to flash this through Odin 3.07 and keep getting md5 invalid, any suggestions? Redownloaded 3 times and still a no go. Thanks
Click to expand...
Click to collapse
Same here...
rogerandgina said:
I'm trying to flash this through Odin 3.07 and keep getting md5 invalid, any suggestions? Redownloaded 3 times and still a no go. Thanks
Click to expand...
Click to collapse
Hmm maybe a bad upload. Let me do it again
freeza said:
Hmm maybe a bad upload. Let me do it again
Click to expand...
Click to collapse
Just wondering if you have the new upload uploaded?
rogerandgina said:
Just wondering if you have the new upload uploaded?
Click to expand...
Click to collapse
I just downloaded the tar file and tried changing the filename by removing .md5, leaving just the .tar extension. Odin started
but failed
I think the answer to your question is no
yep
no go
Has there been any benifits found in the new update? I
Sent from my SM-N900P using Xparent Skyblue Tapatalk 2
OP updated... I posting a different link, same file. I've had one person post success with it, so it was probably either a bad upload or my site not completing downloads.
@freeza sup bud. I have a question if I have mobile Odin and flash this will it affect my phone while I'm on NC5 or update the baseband then flash the stock rooted NH7 rom then reboot
Still a no go with updated op.
screenshot of what im getting
pancho8188 said:
no go
Click to expand...
Click to collapse
here is what im getting
Jocutz1987 said:
@freeza sup bud. I have a question if I have mobile Odin and flash this will it affect my phone while I'm on NC5 or update the baseband then flash the stock rooted NH7 rom then reboot
Click to expand...
Click to collapse
Unless Mobile Odin had changed recently, I believe that modems are about the only thing it won't flash correctly. PC Odin is the way to go for modem flashes (until someone puts together recovery flashable modem).
pancho8188 said:
here is what im getting
Click to expand...
Click to collapse
Strange.....one of my buddies was able to update it just fine.
I'll just go ahead and redo it.
freeza said:
OP updated... I posting a different link, same file. I've had one person post success with it, so it was probably either a bad upload or my site not completing downloads.
Click to expand...
Click to collapse
Worked for me.
Shows up in settings NH7 baseband
Works for me.
Sent from my SM-N900P using Tapatalk