RUU error 158 - AT&T HTC One (M7)

Hello friends I have an AT & T and am trying to flash rom by RUU but I get the message "ERROR [158]: Image error" says I should look for a correct image.
The problem is that I have unlocked bootloader, S-OFF and SuperCid. Should not flash any rom with this?

yurixd said:
Hello friends I have an AT & T and am trying to flash rom by RUU but I get the message "ERROR [158]: Image error" says I should look for a correct image.
The problem is that I have unlocked bootloader, S-OFF and SuperCid. Should not flash any rom with this?
Click to expand...
Click to collapse
What RUU are you trying to flash?

yurixd said:
Hello friends I have an AT & T and am trying to flash rom by RUU but I get the message "ERROR [158]: Image error" says I should look for a correct image.
The problem is that I have unlocked bootloader, S-OFF and SuperCid. Should not flash any rom with this?
Click to expand...
Click to collapse
Yes with superCID and s-off you can flash any RUU .. are you trying to install the 4.4.2 AT&T Kitkat RUU ?
try this one
http://www.androidfilehost.com/?fid=23329332407580500
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip << Yes two times
fastboot reboot
Or use the Developer Edition RUU I posted in your other thread !

clsA said:
Yes with superCID and s-off you can flash any RUU .. are you trying to install the 4.4.2 AT&T Kitkat RUU ?
try this one
http://www.androidfilehost.com/?fid=23329332407580500
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip << Yes two times
fastboot reboot
Or use the Developer Edition RUU I posted in your other thread !
Click to expand...
Click to collapse
I downloaded the rom RUU_M7_UL_K44_SENSE55_MR_BrightstarUS_WWE_4.19.1540.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_353887_signed_3.exe
but to proceed with the flash I get the same "Error 158: Error image - obtain the correct update utility rom".

yurixd said:
I downloaded the rom RUU_M7_UL_K44_SENSE55_MR_BrightstarUS_WWE_4.19.1540.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_353887_signed_3.exe
but to proceed with the flash I get the same "Error 158: Error image - obtain the correct update utility rom".
Click to expand...
Click to collapse
did you try the decrypted ruu.zip i posted above ?

clsA said:
did you try the decrypted ruu.zip i posted above ?
Click to expand...
Click to collapse
not only tested the executable RUU.

Related

Unable to Install Global Update

I am running a rooted Rez with Amon Ra Recovery which is otherwise stock ICS. I have tried three times to install the latest Global OTA. Each time the install fails after an attempt is made to install the downloaded package. The phone reboots into Amon Ra and I see the following messages.
Installing Update
Wrong Task ID 221384E: Error in /cache/fumo/OTAPkg.zip
Status 1
Installation Aborted
Anyone know what is happening? Thanks in advance for the help.
You need the stock recovery to do update....
Sent from my SCH-1605 / Galaxy Note 2 using Tapatalk v 2.4.13
more
Found out hard way: you can't just be on the last official RUU (3.14.605.12) to get the new update from Verizon.
ALSO dammit you have to have previously taken the small February update to 3.14.605.13. The update's name mentions
605.13 in its title. The problem is that you can't get that little update anymore!!!!
Those of us with only 605.12 may have to wait until the next RUU is issued. Gripes me.
You realise someone posted the full ruu zip in this thread. You don't have to get it from software update thing
Sent from my ADR6425LVW using xda app-developers app
tried that
still looks for 605.13 and craps out with an error message!
how to solve that
In February, Flyhalf205 uploaded the 605.13 OTA.zip in another thread.
The one I could not find anywhere.
You take that little one, rename it update.zip, and flash in hboot.
Do a factory reset and it'll boot up.
Then you can get the current OTA from Verizon.
13 zip is here
13 zip
http://forum.xda-developers.com/showthread.php?p=40819479
Sent from my SCH-1605 / Galaxy Note 2 using Tapatalk v 2.4.13
Here is the FIX
michaelbsheldon said:
still looks for 605.13 and craps out with an error message!
Click to expand...
Click to collapse
Download the PH98IMG.zip in the Attachment and put it on your SD Card
1. Flash the above file in Hboot and delete it after done flashing
2. Put the new update.zip on to your SD card.
3. Reboot into Bootloader and choose Recovery
4. It will flash the new update.
5. Download the new.global.firm.PH98IMG.zip from HERE ,rename it to PH98IMG.zip and flash it in Hboot to get the latest Hboot, Radio, ......
6. Done
Just to Be Sure
I managed to get the OTA getting me to 605.13. So if I want to get to 605.14, do I just get the new firmware zip file, rename it, place it onto the sd card, and install it in HBoot and I am good to go? Just checking to be sure. Thanks.
rjr1049 said:
I managed to get the OTA getting me to 605.13. So if I want to get to 605.14, do I just get the new firmware zip file, rename it, place it onto the sd card, and install it in HBoot and I am good to go? Just checking to be sure. Thanks.
Click to expand...
Click to collapse
I just tried but no go. It said there is no update script or something. Any solution?
nbhnohome said:
Download the PH98IMG.zip in the Attachment and put it on your SD Card
1. Flash the above file in Hboot and delete it after done flashing
2. Put the new update.zip on to your SD card.
3. Reboot into Bootloader and choose Recovery
4. It will flash the new update.
5. Download the new.global.firm.PH98IMG.zip from HERE ,rename it to PH98IMG.zip and flash it in Hboot to get the latest Hboot, Radio, ......
6. Done
Click to expand...
Click to collapse
Is this the same process if the device is s-on?
nissmo66 said:
Is this the same process if the device is s-on?
Click to expand...
Click to collapse
You can only use the official update with your bootloader locked and a non modified stock rom or you need to wait for a new RUU to come out.
mjones73 said:
You can only use the official update with your bootloader locked and a non modified stock rom or you need to wait for a new RUU to come out.
Click to expand...
Click to collapse
-or- s-off if s-off and on the latest ota it doesn't matter if you are locked or unlocked. You will need to flash a custom recovery and su when the ruu is done but the update will complete. You can also downgrade the bootloader (hboot) back to a modified one such as vinyl freaks if and only if s-off.
Sent from my Nexus 7 using Tapatalk HD
dottat said:
-or- s-off if s-off and on the latest ota it doesn't matter if you are locked or unlocked. You will need to flash a custom recovery and su when the ruu is done but the update will complete. You can also downgrade the bootloader (hboot) back to a modified one such as vinyl freaks if and only if s-off.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
If you're s-off, you can flash the firmware on it's own and not have to touch the recovery...
mjones73 said:
If you're s-off, you can flash the firmware on it's own and not have to touch the recovery...
Click to expand...
Click to collapse
True also.....
Sent from my Nexus 7 using Tapatalk HD
to get stock recovery open the zip take the recovery and use fastboot and flash recovery.img right guys?
dcasun said:
to get stock recovery open the zip take the recovery and use fastboot and flash recovery.img right guys?
Click to expand...
Click to collapse
yes... put the recovery.img in the same directory as your fastboot command and from a command prompt (at the same directory as your fastboot.exe) issue the command fastboot flash recovery recovery.img
dottat said:
yes... put the recovery.img in the same directory as your fastboot command and from a command prompt (at the same directory as your fastboot.exe) issue the command fastboot flash recovery recovery.img
Click to expand...
Click to collapse
place the recovery.img in platform tools
type fastboot flash recovery recovery.img
and lock the bootloader
run the update
reunlock the bootloader
flash custom recovery
and done
dottat said:
yes... put the recovery.img in the same directory as your fastboot command and from a command prompt (at the same directory as your fastboot.exe) issue the command fastboot flash recovery recovery.img
Click to expand...
Click to collapse
I was on 605.13 stock ICS, rooted and with Amon Ra recovery. I grabbed the 605.12 recover and flashed it and relocked the boot loader. I have tried multiple times to run the OTA (both pulling from Verizon and by putting it on the SD card). It keeps failing with the same 'Wrong Task ID' error mentioned by OP. I even wiped the SD Card, did clear storage from stock recovery, a couple of factory resets to no avail.
Can someone help? Is it possible that the 605.13 OTA a month or so ago didn't install properly since I had Amon Ra. In Software it shows I am at 605.13 so I doubt that. But would you suggest running the 605.13 Update.zip manually and then try to pull the OTA?
misalies said:
I was on 605.13 stock ICS, rooted and with Amon Ra recovery. I grabbed the 605.12 recover and flashed it and relocked the boot loader. I have tried multiple times to run the OTA (both pulling from Verizon and by putting it on the SD card). It keeps failing with the same 'Wrong Task ID' error mentioned by OP. I even wiped the SD Card, did clear storage from stock recovery, a couple of factory resets to no avail.
Can someone help? Is it possible that the 605.13 OTA a month or so ago didn't install properly since I had Amon Ra. In Software it shows I am at 605.13 so I doubt that. But would you suggest running the 605.13 Update.zip manually and then try to pull the OTA?
Click to expand...
Click to collapse
You will need to relock the bootloader then run the 605.12 RUU and let that boot up and not modify anything then you will get the 605.13 update first and then the latest after that, that is how I got the update and had no problems at all.

Stuck at Boot loader

I am trying to restock Verizon Droid DNA
Followed all the guided method , got to a point of where Relocked/S-ON
Unable to use RUU downloaded , check MD5 all correct
Try moonshine to enable S-OFF
flashed firmware and now stuck at 2.06 firmware
How do i restock?
I am unable to boot anything just the bootloader
fastboot is working fine
Unable to flash any zip hboot downloaded , keep getting signature fail
Unable to Unlocked the bootloader too
I am unable to execute adb commad tho
any suggestion?
BloodRaven2011 said:
I am trying to restock Verizon Droid DNA
Followed all the guided method , got to a point of where Relocked/S-ON
Unable to use RUU downloaded , check MD5 all correct
Try moonshine to enable S-OFF
flashed firmware and now stuck at 2.06 firmware
How do i restock?
I am unable to boot anything just the bootloader
fastboot is working fine
Unable to flash any zip hboot downloaded , keep getting signature fail
Unable to Unlocked the bootloader too
I am unable to execute adb commad tho
any suggestion?
Click to expand...
Click to collapse
You said you tried moonshine to get s-off? did it not work?
You need to be a bit more clear. You are trying to go complete stock or use moonshine to unlock and soff? What error do you get when trying to use ruu?
Hit thanks if I helped! Check out my site at www.circuitsaviors.com
Use moonshine to s off. Go to the thread on how to go back to stock. Follow the directions. The signature is obviously failing because you are s on...
Sent from my HTC6500LVW using xda app-developers app
You might want to check out my thread (http://forum.xda-developers.com/showthread.php?t=2438199), but it's not good news...
jtag is ur only answer. I have a htc dna sitting in my drawer because of this very same reason. I've looked and looked. Sorry
People, you need to RUU BEFORE issuing any s-on commands. I'm seeing this repeatedly.
Phaded said:
People, you need to RUU BEFORE issuing any s-on commands. I'm seeing this repeatedly.
Click to expand...
Click to collapse
This is where the problem rise
I did not realize that is no way to downgrade to stock HBOOT
and the worst part now is i cant do anything
yes , option is to JTAG
BloodRaven2011 said:
This is where the problem rise
I did not realize that is no way to downgrade to stock HBOOT
and the worst part now is i cant do anything
yes , option is to JTAG
Click to expand...
Click to collapse
You could've downgraded your hboot... This also needs to be done before issuing any s-on commands
I am unable to issue a new hboot , i got the signature verification failed. If anyone know how to , it be great , JTAG is my last option tho
Check your PMs. I'd be interested in your results.
I think I had the same signature error a few days ago u need to be on the 1.15 Hboot I couldn't figure it out until i read somewhere not to add a .zip when you rename the hboot zip file and it will flash correctly thru adb hope this helps
http://forum.xda-developers.com/showthread.php?p=42352912
Sent from my HTC6435LVW using Tapatalk 2
xaalfx said:
I think I had the same signature error a few days ago u need to be on the 1.15 Hboot I couldn't figure it out until i read somewhere not to add a .zip when you rename the hboot zip file and it will flash correctly thru adb hope this helps
http://forum.xda-developers.com/showthread.php?p=42352912
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
i am unable to use adb command.
I've been reading thru that before i ask this question
try flashing this is fastboot http://www.mediafire.com/download.php?pj2lknq5gr0jkmf
rename to just PL83IMG.zip
then try to execute
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip PL83IMG.zip
and this will return you to stock hboot let me know how it works out and ill try to help you from there
I'm confused. Maybe someone can answer.
He flashed the 2.06 firmware successfully. That will flash a the new hboot, radio and recovery.
Unless he has a custom splash screen, why would RUU'ing fail.
What happens if the 2.06 firmware it's flashed again?
Does it pass the checks?
Nvm: he can't RUU because the hboot has to 1.15.
Gungrave223 said:
try flashing this is fastboot http://www.mediafire.com/download.php?pj2lknq5gr0jkmf
rename to just PL83IMG.zip
then try to execute
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip PL83IMG.zip
and this will return you to stock hboot let me know how it works out and ill try to help you from there
Click to expand...
Click to collapse
all the above failing due to higher fw
and this causing sgnature verification fail
Gungrave223 said:
try flashing this is fastboot http://www.mediafire.com/download.php?pj2lknq5gr0jkmf
rename to just PL83IMG.zip
then try to execute
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip PL83IMG.zip
and this will return you to stock hboot let me know how it works out and ill try to help you from there
Click to expand...
Click to collapse
fr4nk1yn said:
I'm confused. Maybe someone can answer.
He flashed the 2.06 firmware successfully. That will flash a the new hboot, radio and recovery.
Unless he has a custom splash screen, why would RUU'ing fail.
What happens if the 2.06 firmware it's flashed again?
Does it pass the checks?
Nvm: he can't RUU because the hboot has to 1.15.
Click to expand...
Click to collapse
YEAP ,
It need 1.15
anyhow i can fake this to accept a lower hboot?
with a different sgnature?
BloodRaven2011 said:
YEAP ,
It need 1.15
anyhow i can fake this to accept a lower hboot?
with a different sgnature?
Click to expand...
Click to collapse
It's not a signature issue, it's encryption issue. Newer hboots are unable to decrypt the older ruu zip. If you have a "stockish" rom, you can reflash the 2.06 firmware zip. this will flash a signed kernel and recovery and allow the device to _attempt_ to boot to android. If you can get to android, you can then attempt to s-off again.
If moonshine repeatedly fails (don't drink and shine) and also revone repeatedly fails try this:
In moonshine folder you'll see dnashellroot.apk package
1.) adb install dnashellroot.apk
2.) adb shell
3.) am start -n c.fyf/.MainActivity
4.) (wait 10 seconds)
5.) /dev/sh ($ should turn into #)
6.) echo -ne "22222222" | dd of=/dev/block/mmcblk0p5 bs=1 seek=20
^do NOT screw that command up, copy/paste it or risk a brick
7.) exit
8.) exit
9.) adb reboot bootloader
10.) fastboot getvar cid
if it's 22222222, you are good. Proceed to htcdev to unlock, then you can s-off using facepalm.
beaups said:
It's not a signature issue, it's encryption issue. Newer hboots are unable to decrypt the older ruu zip. If you have a "stockish" rom, you can reflash the 2.06 firmware zip. this will flash a signed kernel and recovery and allow the device to _attempt_ to boot to android. If you can get to android, you can then attempt to s-off again.
If moonshine repeatedly fails (don't drink and shine) and also revone repeatedly fails try this:
In moonshine folder you'll see dnashellroot.apk package
1.) adb install dnashellroot.apk
2.) adb shell
3.) am start -n c.fyf/.MainActivity
4.) (wait 10 seconds)
5.) /dev/sh ($ should turn into #)
6.) echo -ne "22222222" | dd of=/dev/block/mmcblk0p5 bs=1 seek=20
^do NOT screw that command up, copy/paste it or risk a brick
7.) exit
8.) exit
9.) adb reboot bootloader
10.) fastboot getvar cid
if it's 22222222, you are good. Proceed to htcdev to unlock, then you can s-off using facepalm.
Click to expand...
Click to collapse
I wish i can execute adb command
What seems to be an issue
i dont have any ROM installed now , and the only thing that i can use is fastboot command
I am familiar with adb , and plus i've created custom ROM before but not for HTC
trying to help a cousin but hell , JTAG here is unfamiliar with this model ( not available in Malaysia )
so i would think , this is a deadend but i never gave hope.
Will try to figure something and all help is much appreaciated.

Can't load RUU

Hey guys,
Found nothing helpful for me with search.
i've tried to install Paranoid Android on my Phone, but after install, only the CWM was loading.
So i've tried to install the RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed.exe
There i get an error, because its the wrong Version. But i have installed this Version already at November 2013.
But so i've tried the RUU_ENRC2B_U_JB_45_Vodafone_UK_1.14.161.13_Radio_3.1204.167.31_release_289473_signed, too.
~same error.
Tried it unlocked and relocked. Is it because i have S-ON? But I don't know how to get it S-OFF.
How can I install the RUU? I'm not a profi. So please subscribe so, that I can understand
*** RELOCKED ***
ENRC2B_U PVT SHIP S-ON RL
HBOOT-1.72.0000
CPLD-None
RADIO-3.1204.171.33
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Sorry, if my english is not perfect. I'm german.
Thanks, Miyako
Miyako6 said:
Hey guys,
Found nothing helpful for me with search.
i've tried to install Paranoid Android on my Phone, but after install, only the CWM was loading.
So i've tried to install the RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed.exe
There i get an error, because its the wrong Version. But i have installed this Version already at November 2013.
But so i've tried the RUU_ENRC2B_U_JB_45_Vodafone_UK_1.14.161.13_Radio_3.1204.167.31_release_289473_signed, too.
~same error.
Tried it unlocked and relocked. Is it because i have S-ON? But I don't know how to get it S-OFF.
How can I install the RUU? I'm not a profi. So please subscribe so, that I can understand
*** RELOCKED ***
ENRC2B_U PVT SHIP S-ON RL
HBOOT-1.72.0000
CPLD-None
RADIO-3.1204.171.33
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Sorry, if my english is not perfect. I'm german.
Thanks, Miyako
Click to expand...
Click to collapse
your HBOOT version number is to high. Without S-OFF you can't downgrade bootloader version number and so RUU fails when trying to apply an older version. And there's no way to achieve S-OFF on this device.
As for your try to flash a custom rom: do you have the latest CWM recovery from official site? because you need it for 4.4 roms. Did you flash the boot.img in fastboot before flashing the rom in recovery?
reaper90 said:
your HBOOT version number is to high. Without S-OFF you can't downgrade bootloader version number and so RUU fails when trying to apply an older version. And there's no way to achieve S-OFF on this device.
As for your try to flash a custom rom: do you have the latest CWM recovery from official site? because you need it for 4.4 roms. Did you flash the boot.img in fastboot before flashing the rom in recovery?
Click to expand...
Click to collapse
My CWM is v6.0.2.7. How can I update it? Or how can I put the install on my Phone from CWM? Don't know how to mount the Flash from it.
Yes, the boot.img, i have installed with fastboot
Edit:
Have downloaded CWM 6.0.4.8 for enrc2b. Can I install it with
fastboot flash recovery recovery-clockwork-touch-6.0.4.8-enrc2b.img ?
Miyako6 said:
My CWM is v6.0.2.7. How can I update it? Or how can I put the install on my Phone from CWM? Don't know how to mount the Flash from it.
Yes, the boot.img, i have installed with fastboot
Click to expand...
Click to collapse
if you flashed the boot.img, you should be able to install PA if the rom.zip is still on your phone just get latest CWM 6.0.4.8 from official cwm site (you'll probably find it under codename enrc2b). don't forget to wipe/format /system, /cache and /data partition before flashing (dont wipe /data/media folder, because this is your internal "sdcard")
have read wrong. will answer new in a few minutes ;D
I will test it with the new CWM
Miyako6 said:
I've made:
1. wipe data/factory reset
2. wipe cash
3. install rom.zip
4. install gapps.zip
5. fastboot flash boot boot.img with cmd in the fastboot directory
6. reboot with the error
Click to expand...
Click to collapse
as i said, you need a newer recovery https://www.clockworkmod.com/rommanager
at the bottom of the list codename "enrc2b"
install this one and retry then.
reaper90 said:
install this one and retry then.
Click to expand...
Click to collapse
The newest CWM, i have installed.
But at my tries to load the RUU, befor posting, i think i have already deleted the Paranoid.zip from my sdcard. I tried
adb push C:\Users\Miyako\Desktop\Flashen\Paranoid\pa_enrc2b-4.43-20140716.zip /sdcard/
But it says:
error: more than one device and emulator
error: more than one device and emulator
So now?
Miyako6 said:
The newest CWM, i have installed.
But at my tries to load the RUU, befor posting, i think i have already deleted the Paranoid.zip from my sdcard. I tried
adb push C:\Users\Miyako\Desktop\Flashen\Paranoid\pa_enrc2b-4.43-20140716.zip /sdcard/
But it says:
error: more than one device and emulator
error: more than one device and emulator
So now?
Click to expand...
Click to collapse
try "adb sideload rom.zip", you have to start sideload mode in recovery first i think.
edit:
reading your error, type "adb devices" first and see what devices are showing up
reaper90 said:
try "adb sideload rom.zip", you have to start sideload mode in recovery first i think.
edit:
reading your error, type "adb devices" first and see what devices are showing up
Click to expand...
Click to collapse
same errormessage
have an screenshot, but can't post it, because i have less than 10 posts
otivothe snp
It's done.
I thank you so much!
I've installed the adb universal driver (http://forum.xda-developers.com/showpost.php?p=50892780&postcount=118). Than the device was shown as "sideload" and not twice.
Than i've installes the rom with "adb sideload rom.zip" and the gapps with "... gapps.zip".
After the "fastboot flash boot boot.img", my phone started.
Now I hope, that I've not the bug, that the GPS dosn't work, because I need it!
*Very happy and thankful*
Greetz, Miyako
Help me urgently
i tried doing custom root, while doing this process i gave factory reset.
after this my OS got deleted im not able to do anything... its not working
here are the details,
bootloader: 1.32.0000
baseband: 1.1204.103.14
version main:1.15.502.9
platform : HBOOT -T305
modeid : PM631****
Built mode : Ship
Boot mode : RUU
can some please help me fixing my phone.
shashphysio said:
i tried doing custom root, while doing this process i gave factory reset.
after this my OS got deleted im not able to do anything... its not working
here are the details,
bootloader: 1.32.0000
baseband: 1.1204.103.14
version main:1.15.502.9
platform : HBOOT -T305
modeid : PM631****
Built mode : Ship
Boot mode : RUU
can some please help me fixing my phone.
Click to expand...
Click to collapse
we need some more information:
- what's your phones "codename" in bootloader (enrc2b or evitareul)?
- what is your CID? in case you don't know how to get it, try this: WinDroid Universal HTC Toolkit
- which RUU did you try to use?
reaper90 said:
we need some more information:
- what's your phones "codename" in bootloader (enrc2b or evitareul)?
- what is your CID? in case you don't know how to get it, try this: WinDroid Universal HTC Toolkit
- which RUU did you try to use?
Click to expand...
Click to collapse
code name is : EVITARE_UL
CID : 11111111
S-OFF
i tried Ruu : RUU_Endeavor_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed
RUU_Endeavor_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
please help me im trying this from past 3 days....
shashphysio said:
code name is : EVITARE_UL
CID : 11111111
S-OFF
i tried Ruu : RUU_Endeavor_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed
RUU_Endeavor_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
please help me im trying this from past 3 days....
Click to expand...
Click to collapse
As you may guess from RUU name now: you've got the wrong RUU file for your phone. EVITARE_UL is the codename for AT&T/Telus X+ (the RUU you used is for the One X btw). Take a look in the One X+ General forum, i think there was a thread with a collection of RUUs.
Since i don't know what carrier you have or where you got this phone, i can't tell you what RUU file you need exactly. I only have International version of X+ (enrc2b). Maybe you should do a bit more research, or maybe someone else can answer this.

I want to update my phone and I can not .. please help

Hello everyone ,
I bought the phone from America HTC One M7 at&t factory unlocked 64GB ..
Now I'm outside the US and I want to update the phone, and when I search for new updates, Message There are no updates to show the current time.
My phone have now software 4.3 with HTC Sense 5.0 and I want to upgrade to 4.4.2 with Sense 6.0
So what are the first steps to do that without affecting the phone ?
The phone doesn't have any root.
I tried to use this official update, But when I enter to recovery mod. A red triangle appears and I can not access to it
http://forum.xda-developers.com/showthread.php?t=2659374
Please I need help
Regards
Anybody here ?
please help
trancemtv said:
Anybody here ?
please help
Click to expand...
Click to collapse
your question belongs in the Q&A section
do you have fastboot / adb on your pc ?
Yes I have now..
And I did now my phone to unlocked bootloader
But still s-on
So what about next step you need ?
trancemtv said:
Yes I have now..
And I did now my phone to unlocked bootloader
But still s-on
So what about next step you need ?
Click to expand...
Click to collapse
post your fastboot getvar all
minus the serial no. and IMEI
now I try to setup RUU after relocke phone with s-on
RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2.exe
but I found this message
"htc_fastboot.exe has stopped working"
what the problem ?
trancemtv said:
now I try to setup RUU after relocke phone with s-on
RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2.exe
but I found this message
"htc_fastboot.exe has stopped working"
what the problem ?
Click to expand...
Click to collapse
You need to flash the firmware first
http://fs1.d-h.st/download/00101/a1w/4.18.502.7 Custom Firmware.zip
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
Now flash the RUU again
clsA said:
You need to flash the firmware first
http://fs1.d-h.st/download/00101/a1w/4.18.502.7 Custom Firmware.zip
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
Now flash the RUU again
Click to expand...
Click to collapse
I did like your steps but that message appear to me in fastboot screen
target reported max download size of 1526722560 bytes
sending 'zip' (29619 KB)...
OKAY [ 2.471s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 5.894s
what can I do ?
trancemtv said:
I did like your steps but that message appear to me in fastboot screen
target reported max download size of 1526722560 bytes
sending 'zip' (29619 KB)...
OKAY [ 2.471s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 5.894s
what can I do ?
Click to expand...
Click to collapse
relock the bootloader
fastboot oem lock
clsA said:
relock the bootloader
fastboot oem lock
Click to expand...
Click to collapse
Yes I did but I have same problem
trancemtv said:
Yes I did but I have same problem
Click to expand...
Click to collapse
let me find the signed firmware
this one should work
https://www.androidfilehost.com/?fid=23329332407580581
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
clsA said:
let me find the signed firmware
this one should work
https://www.androidfilehost.com/?fid=23329332407580581
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
Click to expand...
Click to collapse
sorry I cant understand ..
do you need details about firmware in phone now ?
if yes this is my details
4.3
5.0 HTC sense
relocked
s-on
hboot-1.55.0000
os-3.17.502.3
trancemtv said:
sorry I cant understand ..
do you need details about firmware in phone now ?
if yes this is my details
4.3
5.0 HTC sense
relocked
s-on
hboot-1.55.0000
os-3.17.502.3
Click to expand...
Click to collapse
your fine ..flash the above firmware and then the RUU you have
I did it now and work with me .. but when restart phone stop on HTC logo and shutdown
now hboot 1.56.0000
os-4.18.502.7
but phone not work when reboot
please help I don't know what happened
trancemtv said:
I did it now and work with me .. but when restart phone stop on HTC logo and shutdown
now hboot 1.56.0000
os-4.18.502.7
but phone not work when reboot
please help I don't know what happened
Click to expand...
Click to collapse
did you flash the RUU also ?
clsA said:
did you flash the RUU also ?
Click to expand...
Click to collapse
thank you thank you my friend
I'm already setup RUU now .. and phone back to work with me 4.4.2 with sense 5.5
Thank you very much for your patience with me
Is it possible my phone accept OTA files or not .. to setup sense 6.0 if i need
If not, what are the conditions to do this first
trancemtv said:
thank you thank you my friend
I'm already setup RUU now .. and phone back to work with me 4.4.2 with sense 5.5
Thank you very much for your patience with me
Is it possible my phone accept OTA files or not .. to setup sense 6.0 if i need
If not, what are the conditions to do this first
Click to expand...
Click to collapse
no you won't get the OTA updates
next flash the 5.x firmware and Guru reset Rom
5.12.502.2.firmware.zip
https://www.androidfilehost.com/?fid=23501681358543602
Then unlock bootloader flash TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Then you can flash this rom
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
During install choose no to stock recovery and radio
and choose Yes to Root.
Now you have Sense 6 and the latest AT&T OS
I downloaded your file ATT_Sense6_OTAPkg.zip .. Is this what I needed ?
now I have openrecovery-twrp-2.8.4.0-m7.img
Is it necessary to download openrecovery-twrp-2.6.3.3-m7.img ?
Is there RUU HTC Sense 6.0 ATT
trancemtv said:
I downloaded your file ATT_Sense6_OTAPkg.zip .. Is this what I needed ?
now I have openrecovery-twrp-2.8.4.0-m7.img
Is it necessary to download openrecovery-twrp-2.6.3.3-m7.img ?
Is there RUU HTC Sense 6.0 ATT
Click to expand...
Click to collapse
No sorry the OTApkg will not work for you.
get the file's I posted above, their is no RUU for sense 6 but flashing the firmware + the Guru reset is the same as a RUU
TWRP 2.8.4.0 is fine
ok good.. I will flash Guru_Reset_M7_5.12.502.2_clsA.zip
like steps to flash firmware.zip from fast boot, really?

Question about update

Hello , i have a one m7 unlocked from at&t with android 4.1.2 , i am in europe , it is ok to flash this to my phone RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1.exe ?
NexusGTS said:
Hello , i have a one m7 unlocked from at&t with android 4.1.2 , i am in europe , it is ok to flash this to my phone RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1.exe ?
Click to expand...
Click to collapse
Follow this
There are 2 RUU's for the AT&T One. You flash them from a windows EXE file
first one is here >> http://dl3.htc.com/application/RUU_...13_10.38j.1157.04_release_334235_signed_2.exe
( If you want to s-off the phone do it now with rumrunner before the next RUU)
After that one you can flash this
http://www.androidruu.com/getdownlo...09_10.26.1718.01L_release_356565_signed_2.exe
If the second one hangs or gives a htc_fastboot stopped working, flash this first then the RUU
https://www.androidfilehost.com/?fid=23329332407580581
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot
Click to expand...
Click to collapse

Categories

Resources