Hey guys,
i have the atrix 4g on which i used a simunlock code, so that i coudl put in my sim card from a european carrier, that works great, but the thing is the WiFi stopped working, it just went into a scanning/connecting loop and than it disconnects.
So i factory restored it and figuered out that s soon as i put in a working sim card (one that has cellular reception), the WiFi starts to behave like that and to get it to work i have to factory restore again without a sim card or with a nonworking sim card.
So i tried the motorola support and they said ye hardware issue, send in the phone, my problem however is im in europe right now and i cant really send or get the phone to motorola USA and they totally refuse to send it to an address outside of the US. However im 100% sure its a software issue (both things work for itself, and the thing that even removing the sim card doesnt restore the wifi funcionality makes me think there is some software issue).
So please guys if anyone has an idea how i could fix that i would be really greatful. Btw i tried some of the apps from the market to "fix" wifi (fxr, wififix etc). Fxr said it fixed the wifi bit it still wouldnt connect, the other apps just had the same issue as the stock wireless manager.
Thanks for your time
Did.you use software to unlock it or just a code?
Sent from my MB860 using XDA App
just a code
crnkoj said:
Hey guys,
i have the atrix 4g on which i used a simunlock code, so that i coudl put in my sim card from a european carrier, that works great, but the thing is the WiFi stopped working, it just went into a scanning/connecting loop and than it disconnects.
So i factory restored it and figuered out that s soon as i put in a working sim card (one that has cellular reception), the WiFi starts to behave like that and to get it to work i have to factory restore again without a sim card or with a nonworking sim card.
So i tried the motorola support and they said ye hardware issue, send in the phone, my problem however is im in europe right now and i cant really send or get the phone to motorola USA and they totally refuse to send it to an address outside of the US. However im 100% sure its a software issue (both things work for itself, and the thing that even removing the sim card doesnt restore the wifi funcionality makes me think there is some software issue).
So please guys if anyone has an idea how i could fix that i would be really greatful. Btw i tried some of the apps from the market to "fix" wifi (fxr, wififix etc). Fxr said it fixed the wifi bit it still wouldnt connect, the other apps just had the same issue as the stock wireless manager.
Thanks for your time
Click to expand...
Click to collapse
I have the exact same problem.
My phone is unlocked and can make calls, but WiFi disconnects me almost immediately. The phone also thinks my prepaid sim has H+ connectivity.
When I go back to my AT&T SIM, I have to do a reboot or 2 to get it cleared up, and then WiFi works again.
oh, i see that, i guess its some sort of ATT measure to block nonATT SIM cards, eventho the phone gets simunlock code. But the funny thing is there are a lot of people for whom it all works (like the guys in the unlock thread, using it in canada without a hitch), so im really wondering if this is not just a software glitch (i hope it is and gets fixed witht he 2.3 update..), otherwise my only hope are the devs here to crack wide open the bootloader and put some custom roms on it =/ really a great phone, but all this ATT software crap makes it feel like its an Iphone ...
But uhm still, anyone has any ideas how to try to fix this problem before the updates? =/
crnkoj said:
oh, i see that, i guess its some sort of ATT measure to block nonATT SIM cards, eventho the phone gets simunlock code. But the funny thing is there are a lot of people for whom it all works (like the guys in the unlock thread, using it in canada without a hitch), so im really wondering if this is not just a software glitch (i hope it is and gets fixed witht he 2.3 update..), otherwise my only hope are the devs here to crack wide open the bootloader and put some custom roms on it =/ really a great phone, but all this ATT software crap makes it feel like its an Iphone ...
But uhm still, anyone has any ideas how to try to fix this problem before the updates? =/
Click to expand...
Click to collapse
i also have a friend in saudi arabia who got the unlock code and the wifi is working fine.
only 2 people reported this so far. i guess it could be a hardware problem ? because the other user beside you have this problem even without sim installed " or that what i understood from him "
you can check the other thread too. maybe someone could post something usefull.
hmm i see, where did you find that thread, i was sort of searching for ages and didnt find any issues like that =/
Ye i mean i have this problem without a sim aswell if i dont factory restore the phone, after i do that without a sim card however the WiFi works great...
so i am kind of reluctant to believe it being a hardware issue due to this, sort of software specific issue (at least i think if it would be hardware related, the wifi would start working as soon as i go to airplane mode/take out the sim and a factory reset wouldnt be necessary), or do you think that my theory is rather flawed in thinking that?
and ye the problem is im in europe now and as the reps at motorola support told me, i would have to send the phone to the US for warranty and they would only send it back to an address within the US =/ i will try my luck with the german and uk support site, to see if they could do something for me.
thanks for your time guys tho
hey guys what do you think if i would use this code:
* 2767 * 3855 #
Think before you give this code. This code is used for formatting the original manufacturer. This will delete all files and settings, including internal memory storage. This will also reinstall the phone’s firmware.
To restore it to manufacturer (will it request an unlock code again after that?) cuz i have 2 codes to unlock but the first one worked, so maybe if i woudl try it with the second one than?
I just unlock my atrix with the code from cellunlock, works great and wifi is fine as well. Would like to know where u get the code, and how it turns out if u try reset to default using the combo. Pls update. Ths
Sent from my MB860 using XDA App
I'm having the same issue of not being able to connect to WiFi.
I bought the phone in Las Vegas with an AT&T - pay as you go (no contract).
I bought an unlock code from SwiftUnlocks, and used my Rogers SIM, which appeared to work. I then rooted the phone.
Using the Rogers network, I've been unable to use any sort of data. Phone calls and texts work fine. Then I noticed that my WiFi was not working properly. It would try to obtain an IP address, but couldn't connect. After several reboots, I got the phone to connect to WiFi for a few minutes.
I just did a factory reset, now I'm unable to connect to any network or WiFi to login with MotorBlur, so I can't really use the phone now.
I'm quite frustrated and not sure what else I can do.
Update - after putting the original AT&T SIM card in, and rebooting several times, the WIFI started working again.
I'm still unable to get Data working over the Rogers network in Canada.
Squig80 said:
Update - after putting the original AT&T SIM card in, and rebooting several times, the WIFI started working again.
I'm still unable to get Data working over the Rogers network in Canada.
Click to expand...
Click to collapse
i am getting my phone in few hours, then i am going to order from cellunlock a code and wait for 2 days to get the lock. unless someone has a spare code he can pm me i would be thankful.
the code is IMEI specific, cant give oyujust spare codes
secondly, to get wifi to work you have to remove your sim card, put in the att or a nonworking sim card and do factory reset, than wifi will work. and you can load all the stuff via wifi, and than just put in your working sim and use the phone as a phone +3g data (the 3g data works great for me to be honest)
oh i got my code from swiftunlock but i dont think that matters, they all get it from teh same provider im pretty sure.
and if anyone si wondering t he sbf update did NOT fix my wifi problem. i ahve tried several wifi fix programs and neither worked aswell, the fxr wifi did some stuff that the phone now sees the networks but still cant connect.
this is to update everyone that i got the phone. had an issue about the screen doing lots of flickering. contacted amazon and sent it back.
in the whole process so far i lost around 60$ between importing and exporting the phone. all in all. i will stick with my iphone 4 for now. its a good phone.
but i cant take this sadness all over again if i imported another phone with an issue with it as well. i am too OCD for my own good.
so true what you say, tho im coming form a nokia 6220 classic, a bit older than the iphone 4
Hey GUYS...
I have the same problem.... My Bell Atrix WiFi works great with my Rogers SIM (I had someone unlock it for me), but when I put in my Qatar Qtel SIM, it stops working, and goes into that connect/scan/disconnect loop.
Any solutions?
Search in the dev forym there is a solution for it
crnkoj said:
Search in the dev forym there is a solution for it
Click to expand...
Click to collapse
Thanks. Found it: http://forum.xda-developers.com/showthread.php?t=1077329&highlight=wifi
help mine stoipped working
[16:53] <arana> hi guys i need help with an unlocked atrix 4g att , that was ulocked with att code, then in order to use recovery i got one of the files here http://forum.xda-developers.com/showthread.php?t=1204500
[16:53] <arana> now it is unlocked but wifi is stuck at obtaining ip address
[16:53] <arana> i tried the solutoin here: http://forum.xda-developers.com/showthread.php?t=1077329&highlight=wifi
[16:53] <arana> but still not working
[16:54] <arana> i'll appreciate any help
[16:56] <arana> if possible i would like to put the stock recovery partition if that would fix things, or unlock it with official sbf but i can find it
[16:56] <arana> i used zomgunlock-lite.sbf to unlock
any help?
my carrier is telcel (mexico) and wifi was working fine before i "unlocked" the phone, thank you for any help
Ok, first and foremost I'm not new to rooting for flashing, I did have a LGP350 that I rooted and flashed, it started malfunctioning (hardware issue) so I got a new low end Android phone from Walmart (Huawei U8652), I used SuperOneClick to Root it and installed CWM Recovery, now what I'm having problems with is that I wanted to use GSM networks since I have better GSM coverage in my area, since the phone has AT&T rom is doesn't allow me to select "only use 2g networks" (GSM), as a matter of fact I dont even see the option, so I was looking for a Gingerbread Rom for the U8652.
The forum doesn't seem to have a Huawei catagory, and its quite confusing trying to find anything.
Bump
Well I found 1 compatible rom (cyanogen_u8650-benru89v4), but Only use 2G networks and Network Preferences does not seem to be working properly, I tried to set network preferences to GSM Only but it wont stay on it. Is anyone else experiencing this with this rom?
Bump...??
Hey guys,
I have a pretty unique problem and im not sure there even is a solution, but here goes.
The story is that I had been living in Canada for the last 7 months or so and bought myself a shiny new Desire 601 from Virgin Mobile (its a zara_ul). Since then, I have managed to brick it hardcore style, but i was able to ressurect it after 4 months of fruitless attempts through various odd files, sheer dumb luck, and the RUU from mrplowdans google drive (super props by the way, you saved my phone good sir!). I had to SuperCID the phone in order for the RUU to stick.
So it goes without saying that im now running the Telus version of KK (i updated through the usual OTA once i had returned it to stock 4.2.2) on a VM phone. All good, no issues there. Ive since returned home to Australia, unlocked the phone so it works with an Australian carrier, also all good. Im able to make calls and send texts no issue.
My problem is with mobile data. It seems to be having an issue connecting to my carriers 3g/4g. Initially, there was nothing at all, just the bars in the notification bar telling me that i had a good connection to cellular. No little superscript 3G though, and in settings, although mobile data is 'On', it is showing connection failed. Adding a custom APN appeared to work slightly, the 3G appeared in the notification bar and in settings, mobile data was shown to be 'connected', but still no dice when i try to connect to the web or download an app.
Now i vaguely understand the principles involved here, I get that North american carriers use a different radio frequency to, say, Europe, and that differs again to Australia. My question is, is it on the software side? Would it be possible to find an Australian Radio.img for a desire 601 (i dont even know if they sell them here), flash it, and all will be fine and dandy? Or is it the physical antenna inside the phone that is set to receive only a certain frequency? Im not expecting someone to go and find me a working file or anything, i know most of you live in Canada anyway, but im looking for someone with a greater knowledge of these things to find a theoretical fix.
I know I rant a lot, but in the scheme of things im willing to let this problem slide considering i only just un-bricked it a few days ago AND managed to root 4.4.2 (a significant achievement given my non-existent knowledge of android), but it is a nuicance and if theres something simple i can do of course i will.
Thanks in advance for any help <3
EDIT: Ive since done some googling and discovered that they do sell these phones in Australia, and that the Network specs for it and the canadian model that i have are almost identical, many of the frequencies are the same on both. Leads me to assume that its software sided, the telus radio.img is telling the phone to not see non-canadian frequencies.
Hi all, sim unlocked s-off sprint m9 used to work well on android 6 with official rom. But until the phone was upgraded to Android 7. Data connection stopped working for one operator (NOS in Portugal). However Vodafone works well.
Tried different roms and apn settings, same at all. Data connection does not work on NOS operator.
Does anyone have similar issue and of course any advices?
Thank you all.
redoano said:
Hi all, sim unlocked s-off sprint m9 used to work well on android 6 with official rom. But until the phone was upgraded to Android 7. Data connection stopped working for one operator (NOS in Portugal). However Vodafone works well.
Tried different roms and apn settings, same at all. Data connection does not work on NOS operator.
Does anyone have similar issue and of course any advices?
Thank you all.
Click to expand...
Click to collapse
Why sim unlock a Sprint variant and not an AT&T or T-Mobile which already support GSM?
did you find a solution?
i have exact same issue.
bought one m9 from ebay with sprint (651) firmware on.
lte was working fine in israel (1800 2100).
after nougat im only getting 3g.
it makes sense that i cant use those bands (1 and 3 i think) on a sprint device.. but it did work with marshmallow
Same problem in the USA
I have (nearly) the same problem in the United States with a Sprint CDMA version of the One M9. The main difference is that my data speed is even worse than 3G, around 10-20 Kbps. Occasionally, I get faster speeds, but I haven't been able to figure out if it is location-specific (but always away from home and work) or due to some other characteristic.
The phone came brand new in a retail box from an eBay seller. It worked as expected for 1.7 years. The OTA update which installed Android 7 (aka Nougat) in early 2017 resulted in the very slow data speeds. WiFi is unaffected, but data is so slow that I cannot reliably send or receive MMS; Google Maps says that I do not even have a data connection for traffic info.
EcoMobile (my MVNO provider; I still have a sprint email address, so I know who is actually providing service) could only suggest resetting my phone; did this twice with no change in operation (but several of the programs which automatically re-installed themselves operated differently, including GMail no longer providing auto-complete for addresses).
After literally 2 hours in chat with htc, they told me that my MEID indicates my phone was "made in Taiwan". I took this to mean that: 1) the person I was chatting with had poor English skills (because aren't they all made in Taiwan?), and 2) my phone is gray market (meaning it was not imported into the country via official channels, even though the manual was in the American version of English).
I came to XDA looking for an answer, too. I was mildly surprised to see that this topic was at the top of the list for the One M9.
The best solution for my situation would be the proper ROM for my phone, but I don't know how to figure that out from the MEID. htc USA says they cannot help me with this.
I could even go back to Android 6, but I do rather like the new features in Nougat.
Alternatively, I could root the phone and install a 3rd party ROM, but I still need to know how to choose the proper one for my phone.
I hope this info finds its way to a helpful expert.
Regards,
Jeff