Related
I just acquired a Droid Eris from my buddy of mine, when you turn it on it just stays at the screen with the 3 androids on skateboard(if I turn it on with it plugged into usb It makes the connection noise though). I can Also get into hboot and recovery but no matter what I do it will not install anything, everything just fails. Also its say its S-ON. Any help would be great, thanks.
glitch666 said:
I just acquired a Droid Eris from my buddy of mine, when you turn it on it just stays at the screen with the 3 androids on skateboard(if I turn it on with it plugged into usb It makes the connection noise though). I can Also get into hboot and recovery but no matter what I do it will not install anything, everything just fails. Also its say its S-ON. Any help would be great, thanks.
Click to expand...
Click to collapse
Well, you didn't really say what "everything just fails" means. How about giving us an error message?
While you are at it, what version of recovery is on the phone - Amon_RA v1.6.2, or some version of Clockwork?.
Same deal for the bootloader - how about an exact version number - 1.49.0000, 1.47.0000, or other?
Because your phone is already "soft-bricked", and you got it for free, and because your recovery boots up, you can try flashing "ErisMTDNuke_v0.9.zip". You can find it at this post:
http://forum.xda-developers.com/showpost.php?p=11651122&postcount=21
It has an an assert() in it that tries to block it from running on ClockworkMod, but depending on what version of recovery you have, that may not matter. Let me know if you get any errors running it. If it runs, you should be back in business; it leaves the /system, /data, and "boot" partitions of the ROM blank, so you will need to flash a ROM afterwards. Also, if you have ClockworkMod recovery on the phone, you should consider getting it off of there, and putting one of the two Amon_RA recovery variants on there.
You might find the entire thread that contains the above post very useful, as it describes a method for installing the S-OFF bootloader using the "SoSickWiTiT" rooting method, as well as other tricks such as using fastboot to soft-load recoveries without writing them to flash; that full thread is here:
http://forum.xda-developers.com/showthread.php?p=11652502
Please provide full details on what works / doesn't work, particularly with "ErisMTDNuke_v0.9.zip" - it has only been used on 3 phones so far (worked on all three, though).
cheers
bftb0
I dont think the phones been rooted(my friend has no idea what that even is). It has hboot 1.49.0000, and the recovery is not a custom one, its Android recovery 2e. If I try to Install an update through recovery its says installation aborted. Also if I use pb00img.zip it loads in hboot but says previous version is older and to reboot.
glitch666 said:
I dont think the phones been rooted(my friend has no idea what that even is). It has hboot 1.49.0000, and the recovery is not a custom one, its Android recovery 2e. If I try to Install an update through recovery its says installation aborted. Also if I use pb00img.zip it loads in hboot but says previous version is older and to reboot.
Click to expand...
Click to collapse
OK, that is completely different. It is impossible to load a dev ROM using the stock recovery <2e>
Did you try the "wipe data/factory reset procedure" of the recovery menu, or have you already done that and then the phone hangs at the three droids?
bftb0
If the stock ( <2e> ) recovery factory reset does not work, then the method of last resort is going to be to try and get the S-OFF bootloader onto the phone using the "SoSickWiTiT" rooting method.
Generally what happens - if you have corrupted flash memory partitions - is that parts of this install will fail, but getting the engineering bootloader (1.49.2000 S-OFF) onto the phone will succeed - and from there you can leverage the behaviors of the S-OFF bootloader to get a custom recovery running (by using fastboot). Once that happens, you can run the ErisMTDNuke_v0.9.zip flash to erase the /system, /data, and "boot" partitions, so that a subsequent ROM flashing operation will succeed (probably, no guarantees).
The way the "SoSicWiTiT" rooting method works, you run the "Official 2.1 RUU" Utility on the PC - but just before it is ready to start writing to the phone (after it has unpacked all it's temporary files and installed drivers for you), you take the "Root PB00IMG.ZIP" file, rename it to "rom.zip", and replace the "rom.zip" file unpacked in the temporary file area of the RUU. This gets the S-OFF bootloader installed (at a minimum, possibly the whole rom if your problem is not flash memory page corruption).
The thread I mentioned above has more details; ask questions if you don't understand something.
bftb0
PS You should be doing all of these operations with a well charged battery - 100% is a good place to start. Don't let the phone sit in HBOOT or FASTBOOT mode for extended periods of time - the battery will discharge rapidly, even if the phone is plugged in to the charger.
Thank you for the quick and to the point replies, I will try this later tonight and will post and let you know if it works out. I have tried the factory reset and it doesn't work, but hey it was free if I screw it up Its no big issue lol. Im not new to rooting its just I have no experience with this particular phone, so thank you =].
glitch666 said:
Thank you for the quick and to the point replies, I will try this later tonight and will post and let you know if it works out. I have tried the factory reset and it doesn't work, but hey it was free if I screw it up Its no big issue lol. Im not new to rooting its just I have no experience with this particular phone, so thank you =].
Click to expand...
Click to collapse
OK. Good luck.
The Root PB00IMG.ZIP and the "Official 2.1 RUU" can be found here:
Consolidated HTC RUU, Leak, and OTA Downloads
Amon_RA's original (v1.6.2) recovery is located here
If you don't have a version of fastboot on your PC/workstation already, you can find different platform versions of it a short distance down the HTC's developer page for the ADP.
If you can get the S-OFF bootloader onto the phone, then you can flash Amon_RA's recovery from the PC with a single command:
Code:
fastboot flash recovery recovery-RA-eris-v1.6.2.img
If you don't already have USB drivers installed on your PC, the RUU utility should be able to do it for you automatically (although ymmv depending on your Xp/Vista/Win7/x32/x64 variety).
Let me know how things go.
bftb0
PS It is worth repeating - make sure your phone is well charged when you are doing any flashing.
Yeah I know fastboot like the back of my hand(g1 and other phones that I love dearly but no longer have), im giving this a shot right now, thank bud.
glitch666 said:
Yeah I know fastboot like the back of my hand(g1 and other phones that I love dearly but no longer have), im giving this a shot right now, thank bud.
Click to expand...
Click to collapse
Standing by.
No matter what the official 2.1 RUU gives me a bootloader mismatch error 140 with either the actual rom.zip or the root rom renamed to rom.zip and placed in the temp folder, let me try some more things. Edit RUU says Im going from 2.37.605.4 to 2.36.605.1. Ok so this leads me to believe it has the 4th OTA on it right?
PS -
I might have mentioned it in that other thread, but anyway: the RUU utility will get the phone to cooperate if the phone is put into fastboot mode (or RUU mode). Normally it is expected that the phone will be booted normally when you start up the RUU... but that (obviously) isn't an option for a soft-bricked phone.
cheers
glitch666 said:
No matter what the official 2.1 ruu gives me a bootloader mismatch error 140 with either the actual rom.zip or the root rom renamed to rom.zip and placed in the temp folder, let me try some more things.
Click to expand...
Click to collapse
Rats. Does that happen immediately after the RUU starts up, or only when you tell it to begin the flashing operation?
Here's another wild straw to grasp at.
If you plug the phone into your PC, and then cold-start it (normal boot), do you hear 2 USB sequences at about 5 and 9 seconds, respectively? If the kernel is alive, but looping on something.... and the prior user had USB debugging enabled, and it's a 2.1 ROM, we can probably still root it by hand across ADB.
does "adb devices" give you anything 15 or more seconds after boot-up, or does your (Windows) device manager indicate a "Composite Interface"?
bftb0
Edit RUU says Im going from 2.37.605.4 to 2.36.605.1. Ok so this leads me to believe it has the 4th OTA on it right?
Click to expand...
Click to collapse
Sure sounds that way. Normally that info (the "Main Version") is stored in the misc partition, and it rather surprises me that an OTA install would cause that to happen; but I can't argue with what you are seeing.
That might mean that neither RUU nor PB00IMG.ZIP installs will work without being able to modify the RUU program to ignore version checks.
How about the adb angle - does anything come up on the USB when the 3 skating droids are showing?
No it goes all the way to the flashing processes after the phone goes into bootloader mode. then stops and gives me the error, now with adb when I turn the phone on I hear one chime and then get a device not recognized and no output from adb. Did you see my last post on the other page I edited it about the bootloaders, its says its going from 2.37.605.4 to 2.36.605.1. Sorry you posted before me so ignore this last tid bit.
Long shot, but check your HBOOT screen again - is it still S-ON (1.49.0000) ?
BTW, when you say "bootloader mode" - do you mean FASTBOOT or RUU mode? (The RUU mode is just a graphic with the HTC logo in the middle of the screen, sometimes with small arrows in each of the 4 corners of the screen. FASTBOOT mode says either "FASTBOOT" or "FASTBOOT USB" right on the screen).
I would think that you are starting the process with the phone in FASTBOOT mode, right?
bftb0 said:
Sure sounds that way. Normally that info (the "Main Version") is stored in the misc partition, and it rather surprises me that an OTA install would cause that to happen; but I can't argue with what you are seeing.
That might mean that neither RUU nor PB00IMG.ZIP installs will work without being able to modify the RUU program to ignore version checks.
How about the adb angle - does anything come up on the USB when the 3 skating droids are showing?
Click to expand...
Click to collapse
I am not getting anything from adb.
bftb0 said:
Long shot, but check your HBOOT screen again - is it still S-ON (1.49.0000) ?
Click to expand...
Click to collapse
Yup it stayed the same.
bftb0 said:
Long shot, but check your HBOOT screen again - is it still S-ON (1.49.0000) ?
BTW, when you say "bootloader mode" - do you mean FASTBOOT or RUU mode? (The RUU mode is just a graphic with the HTC logo in the middle of the screen, sometimes with small arrows in each of the 4 corners of the screen. FASTBOOT mode says either "FASTBOOT" or "FASTBOOT USB" right on the screen).
Click to expand...
Click to collapse
First I put the phone into fastboot mode, then fire up RUU and it kicks the phone to a black screen with an htc logo in the middle and trys to flash it(the RUU says its putting the phone into bootloader mode so I guess thats what its in when it restarts to the htc logo).
Don't Quote me but I know the Eris is Almost like my Hero, and with the Hero there's a way to Get it into the Fastboot I Think by Holding Volume Up and Powering on the Phone! Then you Should be Able to Run the Latest RUU for the Eris... Hopefully that will get you back Right!!
Good Luck!
Sent from my Hero using XDA App
After sucessfully getting S-OFF with juopunutBear's wire trick.. I cant get past the black juopunutBear screen
ive tried recovering twice using 4ext..as well as just doing a full wipe except sd and reintstalling the rom but at reboot im right back at the J" screen.
Admittedly I am very green at this process. I took the steps one at a time ( all to try in flash the faux kernel )
So if anyone can or has encounter this problem and knows of the proper steps to get back into the normal boot pls help
much thnx in advance
connect your phone to pc & run again juopunutbear.That will fix it.
nothing changes it just informs me that the device is already s-off'd and then prompts me to exit
rebooting the device brings me right back to the black screen with the juopunutbear img
Try using Hasoon's AIO tool. You can add the kernel there and flash using his tool. It's been a while since I got stuck at that screen but I do remember that his tool helped me get out of it. I'll try and see what I find and post.
http://forum.xda-developers.com/showthread.php?p=22459381
Live and Die on this day....
I flashed an RUU to get out of it. If nothing else works, this will.
Double0EK said:
I flashed an RUU to get out of it. If nothing else works, this will.
Click to expand...
Click to collapse
This seems to be the appropiate step at this time because trying to reinstall a rom from recovery or flashing a kernal does nothing still just keep booting to the black juopunutbear screen..
Newb Question INC!,
how do i flash the ruu
blindnero said:
This seems to be the appropiate step at this time because trying to reinstall a rom from recovery or flashing a kernal does nothing still just keep booting to the black juopunutbear screen..
Newb Question INC!,
how do i flash the ruu
Click to expand...
Click to collapse
You could flash a RUU, then flash a j-bear boot, then flash a recovery, and then either flash a ROM of your choice, or flash a superuser package to get a rooted stock ROM...
or you could use this tool. I made it a while back ago, and this should work in your situation. Be sure to follow directions.
Keylogger_0 said:
You could flash a RUU, then flash a j-bear boot, then flash a recovery, and then either flash a ROM of your choice, or flash a superuser package to get a rooted stock ROM...
or you could use this tool. I made it a while back ago, and this should work in your situation. Be sure to follow directions.
Click to expand...
Click to collapse
ill give this a shot now thanks
thanks so much man great tool...
be sure to develop for the galaxy note ii once its out
blindnero said:
After sucessfully getting S-OFF with juopunutBear's wire trick.. I cant get past the black juopunutBear screen
ive tried recovering twice using 4ext..as well as just doing a full wipe except sd and reintstalling the rom but at reboot im right back at the J" screen.
Admittedly I am very green at this process. I took the steps one at a time ( all to try in flash the faux kernel )
So if anyone can or has encounter this problem and knows of the proper steps to get back into the normal boot pls help
much thnx in advance
Click to expand...
Click to collapse
If youre still javing the problem this will fix it
if you can go to bootloader you need to connect the phone to pc, go to fastboot ( should say fastboot usb)*Go to controlbear folder (from where you ran controlbear to begin withon you pc then open command window in it (hold shift and right click, that willopen command window rigjt there and then*when you get into it you need to enter:
"ControlBear.exe -f" no quotes or "ControlBear f" notice the space after the exe !
Lots of peopke forget to put it in and say it didnt work.
I presume this will fix the problem
Gave my Evo 3d to my borother a few months back, but hes come back to me today saying it was stuck in bootloop.
He booted into the bootloader and did a factory reset, but it was still stuck in bootloop.
I tried to get into recovery to flash a new rom, but when i select recovery from the bootloader, that also goes into a bootloop.
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Not sure if its important but the phone is s-off. Any ideas on whats going on or how to fix?
Apologies, supposed to put this in Q&A forum
While you're at bootloader, connect USB and then flash a stock RUU.
androidcdma said:
While you're at bootloader, connect USB and then flash a stock RUU.
Click to expand...
Click to collapse
Thanks for the reply. Will i lose s-off with this?
Tones1971 said:
Gave my Evo 3d to my borother a few months back, but hes come back to me today saying it was stuck in bootloop.
He booted into the bootloader and did a factory reset, but it was still stuck in bootloop.
I tried to get into recovery to flash a new rom, but when i select recovery from the bootloader, that also goes into a bootloop.
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Not sure if its important but the phone is s-off. Any ideas on whats going on or how to fix?
Apologies, supposed to put this in Q&A forum
Click to expand...
Click to collapse
You didn't say what version of the Evo 3D you have (CDMA or GSM) or what bootloader is installed, but if it's a Sprint CDMA model I would recommend flashing the Sprint ICS RUU.exe from Windows after putting the phone into fastboot mode in the bootloader. You may have to relock the bootloader with the "fastboot oem lock" command first if it shows "***UNLOCKED***" at the top of the screen.
That will fix a lot of problems, especially when the phone is in an indeterminate state. After flashing the RUU you can HTC unlock, flash a custom recovery and then root the stock ROM or flash a rooted ROM.
ramjet73
Sorry it is a UK GSM (Europe). I have revolutionary bootloader installed. Got an RUU to try now thanks.
androidcdma said:
While you're at bootloader, connect USB and then flash a stock RUU.
Click to expand...
Click to collapse
Tones1971 said:
Thanks for the reply. Will i lose s-off with this?
Click to expand...
Click to collapse
^^^^ He got it first with the short version.
No, you won't lose S-OFF and won't need to relock the bootloader first if that's your current status.
And if it's a GSM model everything still applies, you just need a different RUU, which you already have.
ramjet73
Thanks ramjet. Thought this was going to be straightforward but cant get ruu to install. Error 170. Ill keep plugging away / googling away, hopefully come up with something
Tones1971 said:
Thanks ramjet. Thought this was going to be straightforward but cant get ruu to install. Error 170. Ill keep plugging away / googling away, hopefully come up with something
Click to expand...
Click to collapse
Error 170 means that the RUU utility can't find the phone. There's a readme.doc for running the RUU here, and the error codes are towards the end of that.
Are you putting it into "fastboot" mode in the bootloader, which should change to "fastboot usb" when it is connected to a computer? You also need to have the HTC USB drivers active, which can be accomplished by installing HTC Sync.
ramjet73
Tones1971 said:
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Click to expand...
Click to collapse
adb push into a bootlooping phone?
do you have the drivers for the phone? (if not download and install HTC Sync as they come with it)
did you try flashing a custom recovery img through fastboot? (go to bootloader select fastboot, connect USB, type "fastboot flash recovery nameOfYourRecoveryImg.img")
Yeah have tried installing custom recovery through fast boot again, and im in fastboot ok when trying to run the RUU. Also have HTC Sync installed from when i had the phone.. Drivers seemed to be ok as i was able to install the custom recovery with adb, alhough i still got bootloop after that.
Ive a few other things to try when i get home from work. Im sure it shouldnt be too difficult to resolve. Hopefully anyway.
Well this isnt going smoothly at all. Used another PC and was able to get the RUU to run.
However it now comes up with Error 131 Customer ID problem. The RUU was for HTC Europe (non branded). The phone was sim free. When i posted months back my cid was HTC_001. I checked it here: http://forum.xda-developers.com/showpost.php?p=22394863&postcount=172
However now when i get my CID it is showing as CID0202. Any way i can get an RUU to install? Any idea how a CID could change?
EDIT: noticed i used a different command last time.
fastboot getvar cid shows CID0202
adb shell getprop ro.cid now shows device not found (previously showed CID_001)
Thats typing both commands in same window, one after the other. One gets CID0202, the other device not found???
There's a change cid command in fastboot, fastboot oem writecid or something along those lines... however i believe the cid check is in the updater scripts of the ruu in which case a fastboot flash of all the img files should avoid it entirely... i don't remember the procedure for extracting the img files from the ruu but i believe ur supposed to run it and then dig through your temp files...
dessolator666 said:
There's a change cid command in fastboot, fastboot oem writecid or something along those lines... however i believe the cid check is in the updater scripts of the ruu in which case a fastboot flash of all the img files should avoid it entirely... i don't remember the procedure for extracting the img files from the ruu but i believe ur supposed to run it and then dig through your temp files...
Click to expand...
Click to collapse
Thanks for this. Ill see if i can find anything else out about it. So saves running the RUU exe and no cid check done then?
Need to bump this as im not getting anywhere. No RUU's will install, error 31 customer error. Have flashed recovery via ADB and through PG86IMG.ZIP, but still cant get in to recovery as it just continually reboots.
S-OFF with revolutionary. Anybody any ideas please?
Got bigger problems than i thought. Finally got an RUU to install after 4 days of trying, by first using fastboot oem writecid 11111111. But when the phone rebooted it was back bootlooping again. Is there any hope for my phone?
Tones1971 said:
Got bigger problems than i thought. Finally got an RUU to install after 4 days of trying, by first using fastboot oem writecid 11111111. But when the phone rebooted it was back bootlooping again. Is there any hope for my phone?
Click to expand...
Click to collapse
You need to stop cross posting in the d3rp Q&A thread and your own thread if you want more help. Cross-posting is stongly discouraged on XDA and it's really confusing when you are asking for help in one thread while getting different advice in another.
It sounds to me like all the CID changes on your phone have left it in an indeterminate state and I'm not sure at this point what is the correct CID and RUU for your model. If you could detemine that, set the CID correctly and flash the right RUU the phone should work, but it might be too late if you have in fact been flashing firmware that doesn't match your phone because the right RUU may not back that out properly.
That's all I can offer at this point, but since I don't know the history of your phone and how it got the various CID's you have reported, you will probably be the one that needs to figure it out.
ramjet73
Hi.
Iv messed around a bit too much with my phone and im now at the stage where i am unable to get into recovery or factory reset with clockwork mod. all i can use is fastboot
when i start the phone up i get stuck in the HTC screen... iv previously tried pushing a rom to the phone then flashing the boot.img but iv royally screwed it up.
is there any way i can revive the phone from the position im in or is it game over?
shaw194 said:
Hi.
Iv messed around a bit too much with my phone and im now at the stage where i am unable to get into recovery or factory reset with clockwork mod. all i can use is fastboot
when i start the phone up i get stuck in the HTC screen... iv previously tried pushing a rom to the phone then flashing the boot.img but iv royally screwed it up.
is there any way i can revive the phone from the position im in or is it game over?
Click to expand...
Click to collapse
I did basically the same thing a few days ago (I think). Have you seen Hasoon's toolkit? Install and open it and under the links section go for the stock RUU. Download and run it and all should be well.
jrockwell said:
I did basically the same thing a few days ago (I think). Have you seen Hasoon's toolkit? Install and open it and under the links section go for the stock RUU. Download and run it and all should be well.
Click to expand...
Click to collapse
do you have a link for it please. all seeming well seems unlikely
shaw194 said:
do you have a link for it please. all seeming well seems unlikely
Click to expand...
Click to collapse
Here's a link for the toolkit:
http://d-h.st/users/hasoon2000/?fld_id=7459#files
Download and install it, and then click on the RUU link. I know how you must be feeling man...it sucks to be the proud owner of a new $700 paperweight. From what I gather without S-OFF (which as far as I know isn't possible yet on the One X+) it's incredibly rare to completely brick a phone...so don't lose hope
Personally, I would go here http://forum.xda-developers.com/showthread.php?t=2094118 and download the ruu that is applicable to your phone, then I would use hassons toolkit to relock your bootloader. Then boot phone into fastboot adb, and just run the ruu. I have seen it take two runs to work at times, but I've never seen a true brick. As long as the something lights up when you plug it in, ruu's will save you. then just start all over with unlock bootloader, root, flash recovery, and the rom of your choice.
Since HTC ONE X+ is still S-ON it is barely impossible to brick.
If you can reach bootloader (fastboot mode) then simply flash the correspondant Recovery, clear cache (fasboot erase cache) then unplug your USB cable press on Power button one time, Volume down one time time to select Recovery and validate by Power again, your phone should reboot in Recovery.
Lucky Thirteen said:
Since HTC ONE X+ is still S-ON it is barely impossible to brick.
If you can reach bootloader (fastboot mode) then simply flash the correspondant Recovery, clear cache (fasboot erase cache) then unplug your USB cable press on Power button one time, Volume down one time time to select Recovery and validate by Power again, your phone should reboot in Recovery.
Click to expand...
Click to collapse
How do you flash an RUU?
I have the same Problem. An RUU is an .exe file. You only have to run it.
My Problem is that the battery is under 30% and i dont have any idea why its not charging
Did this get resolved, the RUU is an exe not a zip hasoon asks for a zip?
Can someone guide me please?
eskimosound said:
Did this get resolved, the RUU is an exe not a zip hasoon asks for a zip?
Can someone guide me please?
Click to expand...
Click to collapse
I too kinda bricked my hox+ evitareul i have cwm installed but my partitions are all formatted and cwm cannot mount system data or cache and adb side load won't work because of the partitions being erased...i unlocked at htc dev then flashed cwm in fast boot but i did it on a mac so i think thats what messed it up...when the recovery flashed it also formatted the partitions...idk why...Hboot can't scan for anything i get "can't mount usb master system" in hoot...recovery works fine but i can't flash anything...going to try a rue to get me back hopefully...Do you guys think it will fix me in my case? if it can fix me it definitely can help you^^^
It's probably not charging because your recovery might not support offline charging...I charged my hox+ by letting it boot into system even though there was no Rom...if you look closely when it boots the screen will dim and so will the red led in the speaker...when it dims it means it's charging and this works no matter what recovery or Rom you have but your screen will display HTC the entire time it's charging...took me about 45 minutes to get above 30% then I flashed the sense 5 rUU and now I'm back lol...hope I helped
Sent from my HTC One X+ using XDA Free mobile app
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help