Hello there, I have I9300XXUGMK6 currently on my phone, and I was wondering if I could put the I9300XXUGND5 update, so as to know if it is more stable and whether bugs are fixed.
I currently have a bug about connecting phone to pc via usb as well as charging.
It always says "Usb connector connected" then say ".... disconnected"
Had also a problem with car mode coming on and off.
You would be better to factory reset after the update, sounds like you have either corrupt data or system.
If still the same then flash the whole firmware using Odin, follow the guide in general forum. Download the right firmware for your county at sammobile.com
Sent from my GT-I9300 using Tapatalk
Related
Hi,
I am trying to update my Galaxy S II to the latest firmware but whenever I try to connect it to Kies the PC does not recognise it.
I have downloaded fresh copy of kies from the Samsung site and also got my phone back to factory settings.
The phones shows MTP Application connected and the bar keeps moving but nothing happens on my PC.
Any advise would be helpful.
Thanks
try manual way with odin ? also, it is more safe with odin.
download the latest official firmware, you can look from sammobile website and flash it with odin.
i dont like to upgrade via kies. its downloading also upgrading at the same time. its too risk. let say, in the middle of process suddenly the electricity is down. there is a chance that the broken process can brick your phone.
Had the same problem and the way round which i found was to open kies first and then connect your device and it works.
Sent from my GT-I9100 using XDA App
Are you running a stock or a custom rom
Sent from my GT-I9100 using xda premium
and you made a new thread? Because there has never been one about this subject before has there? lol
Hi all,
All up until a few days ago, my computer/s cannot recognise my Samsung Galaxy S2. Whenever I connect my phone to my computer, the phone believes I am plugging in the charger.
I have attempted to turn on/off USB debugger, attempted the USB mass storage connection method and also attempted to use Winamp's automount option.
I thought it could have been my cable and I have tried different cables and phones and it seems my phone is the only problematic one.
Before this issue, usb used to connect very easily, even used for my car headunit.
Yesterday I was running the 2.3.6 firmware and recently changed to 4.0.3 and neither allow the usb to be working.
Has anyone encountered this problem and does anyone have a solution for this problem?
nounderscore said:
Hi all,
Yesterday I was running the 2.3.6 firmware and recently changed to 4.0.3 and neither allow the usb to be working.
Has anyone encountered this problem and does anyone have a solution for this problem?
Click to expand...
Click to collapse
Did the USB work on previous firmware if so you have messed up the install revert to older stock rom firmware and test .
jje
It didnt stop working due to a firmware upgrade. It randomly stopped working when I was using 2.3.6 so i thought maybe upgrading would do the trick, which it did not.
Try doing a factory reset..
Yeah, did a factory reset when I changed from 2.3.6 to 4.0.3 and just tried again. No difference.
I did notice that this error may have occurred when I may have dropped the phone. Not too sure how this would affect anything but just putting it out there.
Did you drop it with the usb connected?
Sounds like its a hardware problem, just try flashing stock again to be 100%
Sent from my GT-I9100 using XDA App
Dropped whilst drunk unconnected to anything, did have a case on it however.
nounderscore said:
It didnt stop working due to a firmware upgrade. It randomly stopped working when I was using 2.3.6 so i thought maybe upgrading would do the trick, which it did not.
Click to expand...
Click to collapse
ICS is not an upgrade its an unstable beta rom not passed by Samsung for use .
Possible dirty USB ports .
jje
How would one proceed with cleaning the usb ports?
In the past I happened to have trouble connecting with the usb port and I solved unistalling and reinstalling Kies. Have you already tried?
I believe what I'm attempting to do is to even use the phone as a mass storage device. I used to be able to do this via straight windows to any computer and even my car headunit. However at the moment a cable is only recognised as a power source and not as a data connection.
http://forum.xda-developers.com/showthread.php?t=438400
just gave this a go, going to leave it overnight to dry. wish me luck
No luck but I have concluded that the USB port possibly could be broken. I'm wondering, does rooting the phone void warranty?
Unfortunatelly it does...
Wipe everything U can, flash back original firmware and do reset with factory JIG... Than U have chance to claim warranty. But its not 100%...
There is thred about reverting somewhere...
Sent from my GT-I9100 using XDA App
Try again but after restarting ur computer !
Does the computer see any external drives (whether you can connect to them or not)?
Does the computer make a noise when you connect or disconnect the phone?
Hi,
I am a moderately experienced owner of S2 which has the following details
from *#1234#
PDA:I9100XWKF3
PHONE : I9100DDKE4
CSC: I9100ODDKF3
Country:India
from about phone(in settings)
Model # : GT - I9100
Android Version: 2.3.3
Baseband Version : I9100DDKE4
Kernel Version : 2.6.35.7-I9100XWKF3-CL276555 [email protected]#2
Build number : GINGERBREAD.XWKF3
I heard there was a KIES firmware update for my phone and so wanted to update. I installed KIES into my laptop and when I fired it up it notified of a KIES software update(update of KIES itself) and after updating KIES,I connected my phone which was detected properly.
I did the firmware update subsequently and after that the problem started. When I connect my phone using USB to the laptop, nothing happens, the phone doesnt charge even. Everything else works fine. I searched various forum posts but none of them work
1. Tick/Untick the USB debugging checkbox at Settings>Applications>Development - did not work
2. type *#7284#, toggle PDA <-> MODEM. didnt work
3. One curious thing is that, if I connect the phone after the phone is fully booted, it is not detected and the phone doesnt charge at all. But if connect the phone when it is switched OFF and then Switch it on, the phone does charge but still is not detected.
4. The cable is not faulty as it works perfectly with other samsung phones(Fit etc...).Also, its not the problem with my laptop as other mobiles are detected fine on my laptop.
pls help
Couple of things to try
1 Check the pins of the bottom of the phone?
2 Uninstall Kies and drivers, and reinstall?
The pins seems to be fine, anything specific I should look for?..and I have tried connecting in other systems with KIES and still the same problem. My friend's android phones connect fine in all the systems. Even if it was KIES drivers problems, shudnt it atleast charge the cell??
Rule one is use official Samsung USB cable
Rule two is use a mainboard USB Port .
jje
Hmm, It is a official samsung cable.
I did not understand what u meant by mainboard port?? I am not using any hub if that whats you meant. I am thinking it is an issue because of the firmware update.
I was actually thinking of getting the firmware update and subsequently, after backing up using clockworkmod, I was thinking if getting either villianROM or revolutionROM. Now, backing up is out of question as the present firmware is broken. So, If I go ahead with the flashing, what options do I have if I want it to get to factory state for warranty purposes.
Connecting the AC charger when phone is switched on, will initiate charging?
Sent from my GT-I9100 using Tapatalk
yes. Normal charging happens fine. So its not the pins I guess.
gradientt said:
yes. Normal charging happens fine. So its not the pins I guess.
Click to expand...
Click to collapse
How about a factory reset? Try that!
sorry, should have mentioned that. I did factory reset twice and then went into recovery mode and did a wipe and clean and cleaned the cache too.
So, alternatively where can I get the stock rom/firmware for the specs i provided above. I found a thread where various firmware were provided but one compatible with my kernel..csc etc,, was not there
I appreciate u all replying. I tried on the indian thread but nobody seems to feel it worth replying.
Mainboard or motherboards USB port only .
jje
gradientt said:
sorry, should have mentioned that. I did factory reset twice and then went into recovery mode and did a wipe and clean and cleaned the cache too.
So, alternatively where can I get the stock rom/firmware for the specs i provided above. I found a thread where various firmware were provided but one compatible with my kernel..csc etc,, was not there
I appreciate u all replying. I tried on the indian thread but nobody seems to feel it worth replying.
Click to expand...
Click to collapse
http://www.sammobile.com/firmware/
Hi Everyone. I'm having a problem with my i9300 since upgrading to Jelly Bean (XXDLIH).
I am 100% stock and unrooted (due to work email restrictions) and had bit the bullet and installed the XXDLIH upgrade via Odin.
Everything went well and the phone is pretty much working perfectly, with 2 exceptions:
1) The phone doesn't recognise it's attached to a dock when in my iBolt dock in the car - I've read a response from iBolt and this seems to be an issue on Samsung's part with the Jelly Bean upgrades. Now I can live with this as I can always upgrade via Odin to the next big thing when it's released right? Nope, see exception 2:
2) No matter what I do, I can't seem to get my computer to recognise the phone when it's connected via USB. It keeps throwing the USB device not recognised error.
Now I've tried three different USB cables and 2 different computers. USB debugging is enabled and the developer option switch is on. The phone pulls a charge from the computer and I can hear the computer ding when the device is connected.
I have factory reset twice.
I've tried the Kies troubleshooter which re-installed the drivers, I've also uninstalled and re-installed Kies.
I've also tried connecting with the phone in download mode and the PC still won't find it.
I've seen Odin available in Play, but to use it I've got to root my phone, which will then cause me all sorts of ball ache due to my phone no longer adhering to corporate policy.
Is there anyone out there that can help out?
Thanks
Mike.
Just one more question on this, if it's not possible to fix the USB issue, is it possible to flash a stock firmware image via the stock recovery?
Thanks
Mike.
How can you be using stock JB when we don't have stock JB in Australia yet? What ROM did you flash?
Kangburra said:
How can you be using stock JB when we don't have stock JB in Australia yet? What ROM did you flash?
Click to expand...
Click to collapse
I grabbed the XXDLIH upgrade package and flashed with Odin.
Mike.
EDIT: It was the I9300XXDLIH_I9300VDSDLI1_VDS package.
Hello,
I seem to have myself a faulty S2. It charges fine from the wall charger but when i plug in a data cable nothing happens and it isnt recognised by windows and nothing appears on screen. It doesn't even charge from USB unless I turn it off and start it up again with the USB cable already connected. I have tried multiple data cables and operating systems. In linux lsusb lists nothing, even when it's charging after being rebooted. It is a stock ROM and has no warrenty
It is model GT-I9100
Android Version 2.3.5
Baseband I9100NEKI2
Kernel 2.6.35.7-I9100XWKI8-CL616395
build GINGERBREAD.XWKI8
Does anyone know if this is a known fault or if there are any fixes before I open the thing up and try to clean the USB connector, probably breaking the phone in the process....
did you tried to put it in download mode and connect to pc? see if it's recognized. and if goes well flash a freshly stock ROM and see if it works
Sent from my GT-I9100G using xda app-developers app
What crzr, said its most likely to be a software problem I had a friend who had the same problem (but it was working fine at first) he flashed it and everything is OK... Hope you get it working...
Using GT - I9100
I thank those who give helpful comments
Soft problem or broken csc. Flash rom again fixed this.
Sent from my GT-I9100 using Tapatalk 2
Thanks folks, I though it would be hardware. Flashing might be hard, its not recognised in download mode either. I can get into recovery. I suppose i could try and install mobile odin and see where that takes me.
OK it happened to me and the problem disappeared by reflashing stock ROM wiping all my data. but of course first I'd made a backup of all
Sent from my GT-I9100G using xda app-developers app