Hello
I want to flash to new Archdroid ROM onto my Samsung Galaxy S III 9300.
From the info i found on this forum, i have to update my CMW505 to the newest version.
Is this possible by flashing the cwm-touch-i717-6043.zip file with the current installed cwm version? Or do i have to use Odin to instal the new version? ive been searching for it, but found no clear answer so far.
Thanks in advance.
Aspheros said:
Is this possible by flashing the cwm-touch-i717-6043.zip file with the current installed cwm version? Or do i have to use Odin to instal the new version?
Click to expand...
Click to collapse
i717? it is a at&t note! don't flash a galaxy note recovery on a galaxy s3, this could break your hardware!!!
in fact if you flash archidroid it will give you the option to flash the newest philz touch recovery (it is based on cwm with extra features). after selecting this option in aroma it will reboot your recovery and you will have the latest one, after that you can flash archidroid without problems.
btw: there is a q&a thread for archidroid
Darkened_Sky said:
i717? it is a at&t note! don't flash a galaxy note recovery on a galaxy s3, this could break your hardware!!!
in fact if you flash archidroid it will give you the option to flash the newest philz touch recovery (it is based on cwm with extra features). after selecting this option in aroma it will reboot your recovery and you will have the latest one, after that you can flash archidroid without problems.
btw: there is a q&a thread for archidroid
Click to expand...
Click to collapse
But flashing archidroid or any other latestrom requires minimum 6.0.4.4 Cwm so he can't flash it until he is on that our newer.
Press thanx if i helped you in anyway...
---------- Post added at 05:43 PM ---------- Previous post was at 05:40 PM ----------
Aspheros said:
Hello
I want to flash to new Archdroid ROM onto my Samsung Galaxy S III 9300.
From the info i found on this forum, i have to update my CMW505 to the newest version.
Is this possible by flashing the cwm-touch-i717-6043.zip file with the current installed cwm version? Or do i have to use Odin to instal the new version? ive been searching for it, but found no clear answer so far.
Thanks in advance.
Click to expand...
Click to collapse
Go here buddy. And download the zip and flash it through your current recovery and reboot recovery
You will have now 6.0.4.7 cwm
http://forum.xda-developers.com/showthread.php?p=39397145
Press thanx if i helped you in anyway...
thank you both for the usefull information & links! :good:
kunal1540 said:
But flashing archidroid or any other latestrom requires minimum 6.0.4.4 Cwm so he can't flash it until he is on that our newer.
Press thanx if i helped you in anyway...
---------- Post added at 05:43 PM ---------- Previous post was at 05:40 PM ----------
Go here buddy. And download the zip and flash it through your current recovery and reboot recovery
You will have now 6.0.4.7 cwm
http://forum.xda-developers.com/showthread.php?p=39397145
Press thanx if i helped you in anyway...
Click to expand...
Click to collapse
Related
I need help i'm not sure how to install/flash a custom recovery image to the Galaxy Ace I have tried following the TUT (http://forum.xda-developers.com/showthread.php?t=1034145)but it is incredibly vague in the steps of what actully to do can anybody help?
CptKlink said:
I need help i'm not sure how to install/flash a custom recovery image to the Galaxy Ace I have tried following the TUT (http://forum.xda-developers.com/showthread.php?t=1034145)but it is incredibly vague in the steps of what actully to do can anybody help?
Click to expand...
Click to collapse
Root phone - install CWM - backup your present rom with CWM - download required rom - wipe/factory reset phone - flash rom. If previous tut was vague there are others search.
Phone is already rooted and I know how to install ROMS thats easy i'm talking about installing a recovery like clockworkmod recovery 5.0.2.6 I think is the latest
CptKlink said:
Phone is already rooted and I know how to install ROMS thats easy i'm talking about installing a recovery like clockworkmod recovery 5.0.2.6 I think is the latest
Click to expand...
Click to collapse
Ok give me 2 minutes will find link
---------- Post added at 01:21 AM ---------- Previous post was at 01:05 AM ----------
Hope this helps and I don't get shot for it.
http://acetips.wordpress.com/2011/11/26/install-cwm-v5-ace-gb/
Hello everyone,
i got samsung galaxy S II I9100 4.1.2 stock SEB(Baltic) rom. baseband version: I9100XXMS2. Kernel version: 3.0.31-1071752
And i want to root it by this way http://forum.xda-developers.com/showthread.php?t=1746794 Method #1, - Root_SuperSU.0.96-Busybox.1.20.2-S2-signed.zip to install superSU + busybox v1.20.2 from Linus Yang.
And its not written that i have to wipe data. Can i not wipe data? Cause i got all my settings and all, i know that on most of custom roms you must wipe. But what about just rooting stock?
Thanks in advance, and sorry for bad english, its not my native
Use this link http://forum.xda-developers.com/showthread.php?t=2116549
Edit : you don't need to wipe for just rooting.
Sent from my GT-I9100 using xda app-developers app
Thanks
king_below_my_lord said:
Use this link http://forum.xda-developers.com/showthread.php?t=2116549
Edit : you don't need to wipe for just rooting.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thank you, it worked, i rooted my s2 i pressed that thumbs up button thingy
Christonio said:
Thank you, it worked, i rooted my s2 i pressed that thumbs up button thingy
Click to expand...
Click to collapse
Good!
Now just add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Good!
Now just add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Okay, i done it. Thanks for tip
How to flash easily without Odin?
hi , im using S2 4.1.2 XWLST . How can i flash it with CWM-SuperSU? Is there any corresponding version for this xwlst firmware ????? if there, where i can find the corresponding CWM Super SU file for XWLST? pls help fellas
chemmutk said:
hi , im using S2 4.1.2 XWLST . How can i flash it with CWM-SuperSU? Is there any corresponding version for this xwlst firmware ????? if there, where i can find the corresponding CWM Super SU file for XWLST? pls help fellas
Click to expand...
Click to collapse
Go to philz kernel thread you will get what you are serching follow the op correctly.
Sent from my GT-I9100 using Tapatalk
pls help.... a newbi here
Jeetu said:
Go to philz kernel thread you will get what you are serching follow the op correctly.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
can u post me the link jeetu which mentions xwlst corresponding philz?
chemmutk said:
can u post me the link jeetu which mentions xwlst corresponding philz?
Click to expand...
Click to collapse
Here you go - http://d-h.st/oDn
Download this zip file and flash it from recovery.
Good luck
@jeetu
Jeetu said:
Here you go - http://d-h.st/oDn
Download this zip file and flash it from recovery.
Good luck
Click to expand...
Click to collapse
Thank you a lot jeet..So little more help ...Is this an integrated SuperSu root kernal. ? Or shud i install superSU again.?
2) Can i wipe data and dalvik cache (of the stock kernel) staying inside this kernal itself and flash a Custom rom after wiping ?
i Dont wanna Brick my phone by doing anything wrong. Pls help jeet.
chemmutk said:
Thank you a lot jeet..So little more help ...Is this an integrated SuperSu root kernal. ? Or shud i install superSU again.?
2) Can i wipe data and dalvik cache (of the stock kernel) staying inside this kernal itself and flash a Custom rom after wiping ?
i Dont wanna Brick my phone by doing anything wrong. Pls help jeet.
Click to expand...
Click to collapse
Don't worry buddy just flash this zip file you will get CWM recovery from that you can flash any custom rom whatever you like.
If you stuck anywhere feel free to PM me.
Good luck :thumbup:
Cheers
cannot get into recovery !!!!!
Jeetu said:
Don't worry buddy just flash this zip file you will get CWM recovery from that you can flash any custom rom whatever you like.
If you stuck anywhere feel free to PM me.
Good luck :thumbup:
Cheers
Click to expand...
Click to collapse
im going to root my S2 for first time.im using a 4.1.2 xxwlst version .i want to install NeatRom 3.1 . But i cannot get into recovery by holding Vol UP + home button + power button. Everytime its restarting to main menu only. what to do ?
chemmutk said:
im going to root my S2 for first time.im using a 4.1.2 xxwlst version .i want to install NeatRom 3.1 . But i cannot get into recovery by holding Vol UP + home button + power button. Everytime its restarting to main menu only. what to do ?
Click to expand...
Click to collapse
Try to press these button at a same time mate . Buttons are working properly?
Thanks jeet..
Jeetu said:
Try to press these button at a same time mate . Buttons are working properly?
Click to expand...
Click to collapse
ya...i flashed kitkat rom. The problem was with the Home key. it does have some mechanical issues. When i pressed too hardly , it worked and i got into recovery.
hey jeet , im going to install NeatRom Jelly Bean , i will be flashing from Kitkat rom rite. So inorder to flash JB , shud i change the kernal or not.
chemmutk said:
ya...i flashed kitkat rom. The problem was with the Home key. it does have some mechanical issues. When i pressed too hardly , it worked and i got into recovery.
hey jeet , im going to install NeatRom Jelly Bean , i will be flashing from Kitkat rom rite. So inorder to flash JB , shud i change the kernal or not.
Click to expand...
Click to collapse
To go back on a stock NeatROM:
Go to recovery
Flash Philz kernel from external SD
Reboot recovery
Wipe data/clean to install a new ROM
Flash ROM or restore your nandroid
Reboot device
Is it Safe ?
Jeetu said:
To go back on a stock NeatROM:
Go to recovery
Flash Philz kernel from external SD
Reboot recovery
Wipe data/clean to install a new ROM
Flash ROM or restore your nandroid
Reboot device
Click to expand...
Click to collapse
Is it safe to flash PhilZ Rooting Kernal again from a rooted device running on CMW kitkat kernal + ROM ??
---------- Post added at 09:54 AM ---------- Previous post was at 09:46 AM ----------
chemmutk said:
Is it safe to flash PhilZ Rooting Kernal again from a rooted device running on CMW kitkat kernal + ROM ??
Click to expand...
Click to collapse
forgot to mention , i am already on a NeatROM kitkat 4.4.2..... i want to go bck to NeatRom JB 5.8
Do u knw y the Zip file is so big .?
chemmutk said:
Is it safe to flash PhilZ Rooting Kernal again from a rooted device running on CMW kitkat kernal + ROM ??
---------- Post added at 09:54 AM ---------- Previous post was at 09:46 AM ----------
forgot to mention , i am already on a NeatROM kitkat 4.4.2..... i want to go bck to NeatRom JB 5.8
Do u knw y the Zip file is so big .?
Click to expand...
Click to collapse
Yes if you read OP on Neat rom kitkat 4.4.2 you will know and yes it's the only way to go back to stock.
The zip is so big because it is aroma rom and having lots of mods.
Hey guys i need some advice regarding rooting my phone and installing custom recovery. my phone is running on stock 4.1.2 XXEMG4. I want to install a custom 4.3 sammy rom. So can i just flash siyah kernel to root the phone and get a custom recovery?? And can i flash a custom 4.3 rom from siyah Recovery???
You can do that.
But I offer you to flash cf-auto-root and rott your device then flash your rom from cwm.
Notic: cwm will be install with cf-root
Sent from my GT-I9300 using Tapatalk
pasanjay said:
Hey guys i need some advice regarding rooting my phone and installing custom recovery. my phone is running on stock 4.1.2 XXEMG4. I want to install a custom 4.3 sammy rom. So can i just flash siyah kernel to root the phone and get a custom recovery?? And can i flash a custom 4.3 rom from siyah Recovery???
Click to expand...
Click to collapse
kernel is not equal rooting or recovery.
read the guides & howtos to know what is the difference. anything explained there.
a good start is cf-auto-root to root your phone, after that continue reading.
---------- Post added at 07:10 AM ---------- Previous post was at 07:09 AM ----------
alireza17mah said:
You can do that.
But I offer you to flash cf-auto-root and rott your device then flash your rom from cwm.
Notic: cwm will be install with cf-root
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
CWM will only be installed if CF-Root 6.4 is used, not with CF-Auto-Root (which is more secure regardign SDS)
chrismast said:
kernel is not equal rooting or recovery.
read the guides & howtos to know what is the difference. anything explained there.
a good start is cf-auto-root to root your phone, after that continue reading.
---------- Post added at 07:10 AM ---------- Previous post was at 07:09 AM ----------
CWM will only be installed if CF-Root 6.4 is used, not with CF-Auto-Root (which is more secure regardign SDS)
Click to expand...
Click to collapse
I have read somewhere that by flashing a 4.3 rom can cause efs issues. So is it better if i flash a sammy 4.3 rom with odin? And then I can flash a rooting kerenel and a recovery right??
pasanjay said:
I have read somewhere that by flashing a 4.3 rom can cause efs issues. So is it better if i flash a sammy 4.3 rom with odin? And then I can flash a rooting kerenel and a recovery right??
Click to expand...
Click to collapse
it is correct that it can come to problems when upgrading from 4.1.2 to 4.3 because Samsung introduced some changes that also effect EFS (e.g search for EFS v2). There are a few threads already that mention how to upgrade the best way, hence I would propose you to search them as I did not upgrade to a Samsung based 4.3 rom due to the fact that I am using SlimBean (AOSP based). Therefore I do not want to recommend you things that might be wrong.
For example http://forum.xda-developers.com/showthread.php?t=2565599 same question
Sent from my GT-I9300 using xda app-developers app
This recovery is more or less useless now. Files will still be hosted though.
ClockworkMod Recovery
Samsung Galaxy SII GT-I9100
All right guys im just going to keep this real nice and simple. Purpose of thread:
Latest CWM Recovery
Kit Kat 4.4 ROM Installation Compatible
Centralized Place to Put The Latest Recoveries
Just a heads up. This is NOT meant to be used as a kernel. I compiled these recoveries from source and only the recovery module is built therefore YOUR PHONE WILL NOT BOOT COMPLETELY AS THERE IS NO KERNEL. I made these recoveries so that users can flash
From ICS/JB to KK with ease
Flash This Over DorimanX Kernel So That You Can Update Your Kit Kat ROM
And Resolve Status 7 Errors When Flashing Kit Kat ROMs On A Out-Dated CWM Recovery
How To Use:
To Flash a Kit Kat ROM From a Out-Dated Recovery CWM Version Less Then 6.0.4.4:
Flash This CWM Recovery File (Does Not Matter Which Version You Pick Just Take The Latest) And Reboot Back Into Recovery Via The Option In The Advanced Menu
You Should Now Have A Grey Coloured Recovery With Version 6.0.4.X
Follow ROM Installation Guide From ROM Thread
Recovery Versions
Click The Numbers To Download e.g. 6.0.4.6
6.0.4.6 (Compiled From CM10.2 JB 4.3.1 Soruce)
6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST)
Thanks For Reading :good:
P.S. This is my first thread in the Galaxy SII forum
XDA:DevDB Information
ClockWorkMod Recovery For SGSII GT-I9100, Kernel for the Samsung Galaxy S II
Contributors
-Grift-, cyanogen
Kernel Special Features: Kit Kat Compatible CWM
Version Information
Status: Stable
Current Stable Version: 6.0.4.7
Stable Release Date: 2014-01-29
Created 2014-01-29
Last Updated 2014-08-16
good job! but i have to ask is Stweaks compatible?
Thanks for your efforts. Download link?
EDIT: Found it
edd89 said:
good job! but i have to ask is Stweaks compatible?
Click to expand...
Click to collapse
Its just the recovery module no use for stweaks :angel:
spectator123 said:
Thanks for your efforts. Download link?
Click to expand...
Click to collapse
Woa you guys are fast.. Just added
haha yes we are buddy keep up the good work
tried to flash this via CWM...does not work. am i doing anything wrong?
how do i install it normaly?
QuAn64m said:
tried to flash this via CWM...does not work. am i doing anything wrong?
how do i install it normaly?
Click to expand...
Click to collapse
Was there a error code?
Edit: Wait hold on you are using a GT-I9100G?????? This is only for the Exynos Galaxy SII GT-I9100/P/M/T
-Grift- said:
Was there a error code?
Click to expand...
Click to collapse
code 7 :-/
---------- Post added at 04:51 PM ---------- Previous post was at 04:29 PM ----------
QuAn64m said:
code 7 :-/
Click to expand...
Click to collapse
oops...my fault...i use a sgs2 G version. sorry !
can i flash this recovery on jb stock recovery??
scorpion.hbs said:
can i flash this recovery on jb stock recovery??
Click to expand...
Click to collapse
No you cannot but the fastest way to get from stock 4.1.2 to Kitkat 4.4 is to
1. Download this into external SDcard
2. Download my recovery and what ever ROM+Files you need into internal/external
3. Flash first file in stock recovery
4. Flash my recovery, reboot back into recovery
5. Wipe data+cache (factory reset)
6. Flash the ROM+Files
7. Reboot
:good:
@Grift, must say have been following your work/posts for sometime now and find/enjoy the way you can explain a lot of ( detail ) clearly without using many too English words. haha.
Thank you very much for this post & code CWM kk compatible.
foot note/tip. upgrade/flash Direct from ICS404 to KKat is possible But the user Must Format /system /data /cache within CWM Kkat as normal factory reset doesn't work for such a big version jump.(my thoughts/theory only).
Usual warning Nandroid backup First as all Rom data Lost doing it this way.
Copy of request below if possible. @Grift. If possible can you release a Temporary version of your (CWM kitkat with out kernel).
Similar to what Philz was releasing for GT i9100.
Reason for request. Is at moment Dorimanx kernel has older cwm. So when I flash permanent CWM kk compatible then re-flash Dori it can break 2nd ROM boot access/entry.
Therefore if possible a Temp version of what you are doing/releasing would be Perfect for my & others dualboot kitkat problems.
Thanks in advance bmad.
Barry Mad said:
@Grift, must say have been following your work/posts for sometime now and find/enjoy the way you can explain a lot of ( detail ) clearly without using many too English words. haha.
Thank you very much for this post & code CWM kk compatible.
foot note/tip. upgrade/flash Direct from ICS404 to KKat is possible But the user Must Format /system /data /cache within CWM Kkat as normal factory reset doesn't work for such a big version jump.(my thoughts/theory only).
Usual warning Nandroid backup First as all Rom data Lost doing it this way.
Copy of request below if possible. @Grift. If possible can you release a Temporary version of your (CWM kitkat with out kernel).
Similar to what Philz was releasing for GT i9100.
Reason for request. Is at moment Dorimanx kernel has older cwm. So when I flash permanent CWM kk compatible then re-flash Dori it can break 2nd ROM boot access/entry.
Therefore if possible a Temp version of what you are doing/releasing would be Perfect for my & others dualboot kitkat problems.
Thanks in advance bmad.
Click to expand...
Click to collapse
Will take a look into it:good:
@-Grift-
How much space is needed to compile a recovery in ubuntu? All, do I need trees used for building roms?
Aiko0923 said:
@-Grift-
How much space is needed to compile a recovery in ubuntu? All, do I need trees used for building roms?
Click to expand...
Click to collapse
I believe you do need the sources. From what I see you work on the Desire HD (Ace) ? Either you download the sources and compile from there or you can try Koush's CWM builder ( just search CWM builder on google ). As for source code Cm10.2 source can be upwards of 10GB easily. For the DHD im not sure if you guys have official CM11 source?
-Grift- said:
I believe you do need the sources. From what I see you work on the Desire HD (Ace) ? Either you download the sources and compile from there or you can try Koush's CWM builder ( just search CWM builder on google ). As for source code Cm10.2 source can be upwards of 10GB easily. For the DHD im not sure if you guys have official CM11 source?
Click to expand...
Click to collapse
We've got unofficial builds of cm11, and most devs have release pretty stable device and kernel trees. Thanks, 10GB isn't bad at all, but will it require me to setup my Build Environment differently?
Cwm
I'm running cwm version 5.8.1.5 and on stock rom 4.1.2. I am thinking of upgrading to 4.4.2. So can u just explain how to proceed with the recovery installation?
Okay can anyone help me? My odin 3.09 while flashing cwm 6.0.2.9 said reset instead of pass. Then phone turned off. After that I can only access download mode and it shows flash counter 2 times. Any help? Was running stock 4.1.2 rooted.
Sent from my Nexus 4
Sent from my Nexus 4
AndroidReborn said:
Okay can anyone help me? My odin 3.09 while flashing cwm 6.0.2.9 said reset instead of pass. Then phone turned off. After that I can only access download mode and it shows flash counter 2 times. Any help? Was running stock 4.1.2 rooted.
Sent from my Nexus 4
Sent from my Nexus 4
Click to expand...
Click to collapse
Flash this in odin
http://www.dorimanx.shine.sk/Androi...rimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
My rom is stock 4.1.2 and using cwm 6.0.1.5 but i can't flash anything include CWM 6.0.4.7 i back recovery and flash CWM 6.0.4.7 but it's error help please
Sent from my GT-i9100 by Tapatalk Pro ♠
6.0.4.8 is already out
Regards
Hi,
i have a glaxy S2 i9100 that i have convert from a galaxy S2 shw-m250s (korean version)
Everythings worked perfectly but since i have convert it i am unable to flash any ROM on it using Odin. i have tried numerous tutorials and available ROMs but i got nothing
the process always stuck on <ID:0/098> zImage no matter the time i wait it don't move.
I don't know what's the problem since the phone boot and works very well.
Please i need help
galaxy S2 i9100
4.1.2 jelly Bean
Kernel XWLSD
Phone XXLS8
bikclaude said:
Hi,
i have a glaxy S2 i9100 that i have convert from a galaxy S2 shw-m250s (korean version)
Everythings worked perfectly but since i have convert it i am unable to flash any ROM on it using Odin. i have tried numerous tutorials and available ROMs but i got nothing
the process always stuck on <ID:0/098> zImage no matter the time i wait it don't move.
I don't know what's the problem since the phone boot and works very well.
Please i need help
galaxy S2 i9100
4.1.2 jelly Bean
Kernel XWLSD
Phone XXLS8
Click to expand...
Click to collapse
Hi
I do not know about korean device.
But on i9100 international you have to root your device, then For installing cm13 for instance you have to repartition first and install twrp 3.x.x and cm13 and gapps which you do by flashing zip-files in recovery (Not with odin).
You should search for the developer @CNBLACK who made 5.1.1 and 6.0.1 roms for i9100 and for korean devices aswell (named 250 or similar)‘
Sent from my ME173X using XDA-Developers mobile app
TriboDoP said:
Hi
I do not know about korean device.
But on i9100 international you have to root your device, then For installing cm13 for instance you have to repartition first and install twrp 3.x.x and cm13 and gapps which you do by flashing zip-files in recovery (Not with odin).
You should search for the developer @CNBLACK who made 5.1.1 and 6.0.1 roms for i9100 and for korean devices aswell (named 250 or similar)‘
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
thanks for the reply
i was not able to flash any root kernel like cf-root (remember! odin always fail!) so i used kingoroot to root my phone. i successfully did it but the problem remaind the same i cannot flash twrp 3.x.x. i dont know why.
Any one else with a solution please? thanks a lot
bikclaude said:
thanks for the reply
i was not able to flash any root kernel like cf-root (remember! odin always fail!) so i used kingoroot to root my phone. i successfully did it but the problem remaind the same i cannot flash twrp 3.x.x. i dont know why.
Any one else with a solution please? thanks a lot
Click to expand...
Click to collapse
On i9100 int. you can flash philz cwm6 stockkernel.zip which has root by using stock-recovery because it is a zip-file (no need for odin)
And If you flash isorec twrp it will not show up If are not on an isorec-kernel.
So after installing philz use again recovery to install latest latest cm11 20161119 by @zjq985062714 i9100.zip (has isorec kernel) and isorec twrp 3.0.2-1.zip by @the.gangster.
Again this works without odin just using recoveries.
Then you can do repartitioning and flashing cm13 of others.
This is How i do it always On my i9100 international.
Sent from my ME173X using XDA-Developers mobile app
TriboDoP said:
On i9100 int. you can flash philz cwm6 stockkernel.zip which has root by using stock-recovery because it is a zip-file (no need for odin)
And If you flash isorec twrp it will not show up If are not on an isorec-kernel.
So after installing philz use again recovery to install latest latest cm11 20161119 by @zjq985062714 i9100.zip (has isorec kernel) and isorec twrp 3.0.2-1.zip by @the.gangster.
Again this works without odin just using recoveries.
Then you can do repartitioning and flashing cm13 of others.
This is How i do it always On my i9100 international.
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
thanks but i don't have any CWM recovery installed. i should i flash zip files?
bikclaude said:
thanks but i don't have any CWM recovery installed. i should i flash zip files?
Click to expand...
Click to collapse
Hi
Maybe you overlooked it in my Post.
I wrote you can install philz Kernel by using STOCK - RECOVERY. On switched off device press 3 buttons at the same time until stock recovery appears ( Volume up-, power- and home-button).
Then move to "apply update" and choose philz.zip from SD card (of course you have to copy it on
card first).
Reboot System.
Switch off device
Reboot in recovery using 3 buttons and you will have custom recovery to continue.
Sent from my ME173X using XDA-Developers mobile app
I need to look up for my OLD SGS2, couse I see this phone cannot die!!!
Marun1982 said:
I need to look up for my OLD SGS2, couse I see this phone cannot die!!!
Click to expand...
Click to collapse
True!
We have already some nice mm-roms and our devs just cooking Nougat for our Phone!
Sent from my STAIRWAY using XDA-Developers mobile app
TriboDoP said:
Hi
Maybe you overlooked it in my Post.
I wrote you can install philz Kernel by using STOCK - RECOVERY. On switched off device press 3 buttons at the same time until stock recovery appears ( Volume up-, power- and home-button).
Then move to "apply update" and choose philz.zip from SD card (of course you have to copy it on
card first).
Reboot System.
Switch off device
Reboot in recovery using 3 buttons and you will have custom recovery to continue.
Sent from my ME173X using XDA- mobile app
Click to expand...
Click to collapse
Hi,
i have successfully install the philz recovery but the problem who came out is that my phone now hardly boot and always stuck on the samsung logo. i can some times enter the custom recovery. i don't really know what's the problem. is there any solution to that? should i continue installing CM11 (or 12.1 maybe)?
help please. i think i'm loosing my phone
bikclaude said:
Hi,
i have successfully install the philz recovery but the problem who came out is that my phone now hardly boot and always stuck on the samsung logo. i can some times enter the custom recovery. i don't really know what's the problem. is there any solution to that? should i continue installing CM11 (or 12.1 maybe)?
help please. i think i'm loosing my phone
Click to expand...
Click to collapse
Hi
This is strange. Philz kernel is well known as a safe kernel which has been used by many people.
Did you look for the correct version for your device ?
I am not sure but it should be PhilZ-cwm6-XWLSD-OXX-4.87-signed.zip (or similar)
Anyway you could try to make a Backup in recovery.
Then i would flash cm11 and twrp which i mentioned before.
In case you flashed wrong kernel flash correct PhilZ kernel or cwm 6.0.4.7
Then flash cm11 and twrp.
Just want to say once more all this works fine On i9100 int. and i do not know if your device is different in any way.
Did you read the threads by @CNBLACK which i recommended?
Sent from my ME173X using XDA-Developers mobile app
Okay, I checked this thread.
You must upgrade to Stock JB Firmware.
And If you already to use Stock JB, Check my SGS2 thread (u1skt).
TriboDoP said:
Hi
This is strange. Philz kernel is well known as a safe kernel which has been used by many people.
Did you look for the correct version for your device ?
I am not sure but it should be PhilZ-cwm6-XWLSD-OXX-4.87-signed.zip (or similar)
Anyway you could try to make a Backup in recovery.
Then i would flash cm11 and twrp which i mentioned before.
In case you flashed wrong kernel flash correct PhilZ kernel or cwm 6.0.4.7
Then flash cm11 and twrp.
Just want to say once more all this works fine On i9100 int. and i do not know if your device is different in any way.
Did you read the threads by @CNBLACK which i recommended?
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
Eureka!!!! i have found the problem and solution!!!
as i've previously said, my phone was rooted using kingoroot. once i have installed philz, it start bugging. So i though myself maybe there was a conflict between superuser by kingoroot and superuser by philz. i tried to unistall kingoroot but i was unable tu unistall superuser (don't really know why). nevetheless i have disabled the kingoroot superuser in application manager and the problem just disappeared. now my phone is working perfectly. i have repartitionned it in 6Gb internal and 7Gb USB. i'm ready for the next step.
thanks a lot Sensei
CNBLACK said:
Okay, I checked this thread.
You must upgrade to Stock JB Firmware.
And If you already to use Stock JB, Check my SGS2 thread (u1skt).
Click to expand...
Click to collapse
sorry but i'm confused. as i have mentionned in my post, my phone was originaly a SHW-M250S but i have convert it in gt-i9100 by using a pit file and flashing a new firmware. so i should continue by flashing cyanogenmod for SHW-M250S or for gt-i9100?
bikclaude said:
Eureka!!!! i have found the problem and solution!!!
as i've previously said, my phone was rooted using kingoroot. once i have installed philz, it start bugging. So i though myself maybe there was a conflict between superuser by kingoroot and superuser by philz. i tried to unistall kingoroot but i was unable tu unistall superuser (don't really know why). nevetheless i have disabled the kingoroot superuser in application manager and the problem just disappeared. now my phone is working perfectly. i have repartitionned it in 6Gb internal and 7Gb USB. i'm ready for the next step.
thanks a lot Sensei
Click to expand...
Click to collapse
Glad your device is working again.
Please keep in mind that (on i9100) you have to increase the SYSTEM partition to 1 GB or more If you want to flash any cm13 or cm14 rom.
As far as i can see you increased only data (internal) partition.
Sent from my ME173X using XDA-Developers mobile app
bikclaude said:
sorry but i'm confused. as i have mentionned in my post, my phone was originaly a SHW-M250S but i have convert it in gt-i9100 by using a pit file and flashing a new firmware. so i should continue by flashing cyanogenmod for SHW-M250S or for gt-i9100?
Click to expand...
Click to collapse
Hi again
My opinion is: once the device is converted to i9100 it should behave like one.
Maybe anybody can confirm this.
If it were my device i would make a
- backup in recovery (important!)
Then i would have a go and make
- clean flash of latest cm11 + gapps + twrp 3 ( i think i mentioned the Files before).
If it works - fine! (and can think about flashing other roms).
If it does'nt work: restore the backup from recovery .
But it is your device and your decision.
Sent from my ME173X using XDA-Developers mobile app
TriboDoP said:
Hi again
My opinion is: once the device is converted to i9100 it should behave like one.
Maybe anybody can confirm this.
If it were my device i would make a
- backup in recovery (important!)
Then i would have a go and make
- clean flash of latest cm11 + gapps + twrp 3 ( i think i mentioned the Files before).
If it works - fine! (and can think about flashing other roms).
If it does'nt work: restore the backup from recovery .
But it is your device and your decision.
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello! i'm back again:cyclops:
i have successfully install Philz but when i tried to intall the CM11, in had a fail with this message "set_metadata_recursive: some changes failed".
fortunately i have revovered the stock ROM.
so what's the problem? maybe it's the CM11 i have flash? any other help or link please?
thanks a lot
Regards,
bikclaude said:
Hello! i'm back again:cyclops:
i have successfully install Philz but when i tried to intall the CM11, in had a fail with this message "set_metadata_recursive: some changes failed".
fortunately i have revovered the stock ROM.
so what's the problem? maybe it's the CM11 i have flash? any other help or link please?
thanks a lot
Regards,
Click to expand...
Click to collapse
Hi
cm11 should not make any trouble at all.
I do not know why this message turned up.
Please tell me what exact Recovery you used for flashing (e.g. philz cwm 6.0.4.7) and which cm 11 you flashed.
Maybe the Recovery should be updated to latest.
Still I wish somebody would confirm that your korean converted device can be treated as an i9100.
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 08:56 PM ---------- Previous post was at 08:46 PM ----------
Hi again
Just did some searching and a reason for this error is as I supposed:
You have to update the Recovery.
Flash in present philz Recovery the "cwm 6.0.4.7".
Then use this Recovery to flash latest cm11 + gapps + twrp 3
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 09:54 PM ---------- Previous post was at 08:56 PM ----------
@bikclaude
The file name is: philz_touch_6.48.4-i9100.zip
Sent from my GT-I9100 using XDA-Developers mobile app
TriboDoP said:
Hi
cm11 should not make any trouble at all.
I do not know why this message turned up.
Please tell me what exact Recovery you used for flashing (e.g. philz cwm 6.0.4.7) and which cm 11 you flashed.
Maybe the Recovery should be updated to latest.
Still I wish somebody would confirm that your korean converted device can be treated as an i9100.
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 08:56 PM ---------- Previous post was at 08:46 PM ----------
Hi again
Just did some searching and a reason for this error is as I supposed:
You have to update the Recovery.
Flash in present philz Recovery the "cwm 6.0.4.7".
Then use this Recovery to flash latest cm11 + gapps + twrp 3
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 09:54 PM ---------- Previous post was at 08:56 PM ----------
@bikclaude
The file name is: philz_touch_6.48.4-i9100.zip
Sent from my GT-I9100 using XDA-Developers mobile app
Click to expand...
Click to collapse
OK thanks,
please can you paste the philz_touch_6.48.4-i9100.zip link? i cannot find it
bikclaude said:
OK thanks,
please can you paste the philz_touch_6.48.4-i9100.zip link? i cannot find it
Click to expand...
Click to collapse
Put only the exact File name in Google search and you should find it in a second .....
Sent from my ME173X using XDA-Developers mobile app
hello!
thanks TriboDoP but i'm sorry i thing something went wrong for me. i have install philz_touch_6.48.4-i9100.zip as you said but after that my phone just brick. fortunately i have reinstalled it USING ODIN!!! (i had no choice and i desperately tried with odin and it worked). Now i have 2 questions: 1) why did i got a brick after installing philz_touch_6.48.4-i9100.zip??? 2) now that i see that i can flash using odin is there any safety alternative with ODIN to install android 4.4.2 or 5.1? any other suggestions will be appreciate.
really, thanks for your help. i really appreciate