Hi everyone, Today I updated the cyanogen ROM on my Razr and fond it had a smaller partition then I wanted so went and uninstalled the OS and restarted now I can't get passed the static Motorola "M" logo (not the animated one).
I've tried the RSD Lite method with "Blur_Version.673.94.328.XT910.Retail.en.AU" from sbf.droid-developers.org/phone.php?device=10 but it doesn't do anything after unpacking. I've updated drivers too, when I connect USB via AP fastboot it makes a noise and shows up as "fastboot cdma_spyder s" on my comp but nothing else.
I'm at a loss as to what I can do. Can someone please help me?
please help
carpwhirly said:
I've updated drivers too, when I connect USB via AP fastboot it makes a noise and shows up as "fastboot cdma_spyder s" on my comp but nothing else.
Click to expand...
Click to collapse
bump
carpwhirly said:
Hi everyone, Today I updated the cyanogen ROM on my Razr and fond it had a smaller partition then I wanted so went and uninstalled the OS and restarted now I can't get passed the static Motorola "M" logo (not the animated one).
I've tried the RSD Lite method with "Blur_Version.673.94.328.XT910.Retail.en.AU" from sbf.droid-developers.org/phone.php?device=10 but it doesn't do anything after unpacking. I've updated drivers too, when I connect USB via AP fastboot it makes a noise and shows up as "fastboot cdma_spyder s" on my comp but nothing else.
I'm at a loss as to what I can do. Can someone please help me?
Click to expand...
Click to collapse
What recovery program you are using at your devices ?
Have you try to another computer ?
Sent from my XT910 using XDA Free mobile app
BUMP
I'm having the same issue with the same device (XT910 Telcel Mexico) and I'm really frustrated
abrhmax said:
BUMP
I'm having the same issue with the same device (XT910 Telcel Mexico) and I'm really frustrated
Click to expand...
Click to collapse
Search in the forum about razzr xt910 latam.. Download the sbf file (official firmware), make sure you have an adequate battery ( about 80% ). Then check the driver on your computer make sure you have the driver installed in it. and if the problem still exist try to plug to another pc or laptop and dont forget to install the driver on the other laptop or pc that you used.
please read another thread in this forum to get another option and method about your phone.
Hope this help.
Sent from my XT910 using XDA Free mobile app
Related
Before some of you gets upset with me posting the same kind of question, please know that I looked at the forum everywhere plus some other forums and tried almost everything. Here's the summary.
I recently got Droid Razr Asia version and I upgraded to EU Retail rom n rooted it.
There was one problem that I noticed that only bluetooth was not working.
Checked online, and found out that it's the radio mismatch b/w EU and Asia version.
So I downloaded RAZRX rom and was trying to flash it again with bootstrap.
So the process started and in 10 seconds it failed.
So I tried to search other forums ...
at some place i found that ... after Hard Resetting, clearing catche; I am also supposed to format the system.
So I followed the whole procedure, and turns out that again it does not get FLASHED. So I downloaded the ASIA version again and tried to format. It did not work. I tried with EU version, it did not work.
So after getting tired, I tried with RSDLite to flash through PC.
That's when I found out that ...
It detects the phone ... but the phone has no EMEI, software version or any other details. Everything is n/a.
Still I tried, and it said "fastboot installation failed" or somethin like that.
And now my phone is stuck on red motorola logo.
I tried to power off and go to bootloader fastboot ...
and it says "Fastboot Locked ... Press power button to power down."
I tried with the DroidRazrUtility1.4 also ...
But it does not detect the phone.
I tried other few things I found online. But nothing worked.
I also drained the battery by keeping it aside to see if the fastboot gets unlocked, but it didn't work.
However, I haven't removed the battery yet. Cause I do not have the tools.
Please can somebody tell me step by step approach how to do this?
Because I haven't found out where I am going wrong in the given methods. and btw, I have followed everything exactly step by step.
Really appreciate any kind of help.
Thank you very much.
Try to flash with RSD Alternative
http://forum.xda-developers.com/showthread.php?t=1453660
Thanks a ton.
But will it still work if my AP FATBOOT mode says that "Device is Locked"
And the battery is on low?
samthehell said:
Thanks a ton.
But will it still work if my AP FATBOOT mode says that "Device is Locked"
And the battery is on low?
Click to expand...
Click to collapse
Probably not. I read on one of the forums there might be a way around the battery being low. I think it was here in xda. Do a search for fast boot install or battery, something like that. If you find that doesn't work you would have to make the tbh cable which allows power to the phone without a battery, or in your case a near dead battery.
Sent from my Droid Razr using Tapatalk
"Device is locked" is natural, (almost) all of our bootloaders are locked. Nothing to do with flashing official ROMs.
You'll need to make a factory cable if the battery is low, search the development forum for a guide.
Sent from my XT910 using xda premium
Thank you all ... Just ordered the cable. Hope it works.
Appreciate all the help.
samthehell said:
Thank you all ... Just ordered the cable. Hope it works.
Appreciate all the help.
Click to expand...
Click to collapse
Here is where u can find full 2.3.6 Asian fastboot file, so you can use rsd for flashing 2.3.6 but for flashing 2.3.5 you have to use Alternative rsd because of bl version
http://forum.xda-developers.com/showthread.php?p=22821170
Sliced by my Razr on Tapatalk
Hello guys,
I really really need your help, I have spend like two weeks reading articles and possible solutions to my problem and none of them worked.
My cell is the international version GT-I9100 and my PC has W7 Ultimate installed
I have my phone in USB debug mode and have installed USB drivers with KIES
2 weeks ago I was able to get to download mode by using the 3 buttons method with no problems... so I decided to try to install the latest ICS I9100XXLPQ with ODIN
Odin did recognized the cellphone and the yellow label appeared and show the message accepted... so far so good, put the I9100XXLPQ file in PDA, check the Auto Reboot and F. Reset Time options and hit the Start button but the problem started there.... it just sits at setup connection and wont do a thing. wait for more than 30 mins and nothing just sits there.
So I unplugged the cellphone from the cable thinking that it would be ok since Odin didn´t started with the flashing process (or at least that what i thought)... there´s the problem, now my cellphone does not came up and I´m not even able to get into download mode. I just get a black screen (see attachment)
I have tried with the 3 buttons, with One-Click Unbrick and with the Jig cable and none of them worked, I just keep getting the same screen.
(by the way... i tried with One-Click Unbrick but it still saying that the drivers are not installed properly so it keep installing the drivers over and over and I have not been actually able to use it.)
Odin is still able to recognized the cellphone so I tried to re-flash the cellphone doing the same thing this time it passed the connection setup and seems that it will worked but after 5 to 10 mins it failed but with no error message. I guess that it wont do anything since the cell is not in download mode.
Any ideas or suggestions would be more than appreciate!
Regards...
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
try to use a JIG,it will force the phone to enter the download mode
fearkillerr said:
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
I haven't worked much with i9000 or i777 to figure out heimdall compatibility. Your option is Odin right now.
Your only solution is a USB JIG.
shesho07 said:
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
Click to expand...
Click to collapse
Just open that program, install the usb drivers for it while connecting your phone and try to flash the zimage.img into the phone manually. I believe it will work. I've fixed many bricked galaxy devices with that.
Sent from my GT-I9100 using xda premium
Hi
Please assist in this regard, I rooted my device and installed Rom Manager, and tried to flash MIUI Rom. My devices rebooted but were stuck on the Moto boot screen. I tried system recovery by holding down volume+- & power button, and it indicated my device were locked. My battery is flat and I'm unable to charge the battery at all. firmware 65.1.40.XT910.MERetail.en.06 Android Ver : 2.3.6. How do I get my device to work again amd where can I find the original Rom to flash with RSD lite ???
You feedback would be much appreciated.
Regards.
http://forum.xda-developers.com/showthread.php?t=1539192
This should get you started. You can try an old school battery pull (yes it is possible to remove the back, just have to pry like hell)
EDIT: Found a video on youtube for exactly this scenario.
http://m.youtube.com/#/watch?featur...ch?v=QfT2Bejkcdk&feature=youtube_gdata_player
Good luck mate
Sent from my XT912 using xda premium
Team black hat adapter
shop.teamblackhat.info/Factory-Adapters-motadapt.htm
I recommend getting a tbh adapter. It lets you power the phone directly from USB even with a dead battery. After that you need to use RSD liter or a similar tool to fastboot he phone back to stock.
Resolved Problem !!!
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Bricked Razr XT910
My razr xt910 is bricked,whenever i turn it on it goes to fastboot with the following message:Ap Fastboot Flash Mode (flash failure)
Battery Low(No matter how much i hcarge it) ,Please Need Help,
Bought From London
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
lol... Am I high or did you just shoved 5v on your Razr 3.7v battery directly from the usb port?
please help me,the razr is bricked ,it says locked and rsd is not detecting it,ive been trying to unbrick for the last 4 hours.pleas help
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
Your picture inspired me so I just made a factory cable, pretty easy.
Bricked MOTOROLA xt910s
Dear concerns,
I was using MOTO xt910s Korean, during the software updating its bricked and I didn’t take any recovery backup. 1st my phone start and struck on LOGO and also go to recovery mode, but after that I discussed with one developer and he has changed the KERNAL of my mobile, now it only on in AP fastboot Mode. I am so worried about my phone, please give me solid solution. And 1 thing more during all that its battery also dead, I am also searching new battery.
I am waiting for your best and earlier response.
Thanks & Regards,
Usman
usman.yousaf said:
Dear concerns,
I was using MOTO xt910s Korean, during the software updating its bricked and I didn’t take any recovery backup. 1st my phone start and struck on LOGO and also go to recovery mode, but after that I discussed with one developer and he has changed the KERNAL of my mobile, now it only on in AP fastboot Mode. I am so worried about my phone, please give me solid solution. And 1 thing more during all that its battery also dead, I am also searching new battery.
I am waiting for your best and earlier response.
Thanks & Regards,
Usman
Click to expand...
Click to collapse
Wipe cid with fastboot.Use CMD to flash a EU Jellybean.
Sent from my XT910 using xda app-developers app
Need Solution of bricked MOTO XT910S
我顶你个肺隔膜 said:
Wipe cid with fastboot.Use CMD to flash a EU Jellybean.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Dear i am not a developer, i am a noob, please provide me easy way to flash my phone. please support me i am so worried
usman.yousaf said:
Dear i am not a developer, i am a noob, please provide me easy way to flash my phone. please support me i am so worried
Click to expand...
Click to collapse
Maybe english is too bad to explain this..
http://pan.baidu.com/share/link?shareid=1379604126&uk=4010743545
Rember to wipe your Cid first.
Download this,extract all the files content inside to where your extraxted EU Fastboot file is.And run the 运行我.bat,this will flash the EU ROM to your phone.This thing may damge your phone(Im using it with no problem),I wont pay any responsibility to any damge to your data,hardware or anything.
Sent from my XT910 using xda app-developers app
How Did You Do This?
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
I'm in the same situation and need to charge my bricked XT910. If I can only do it the way you did, I could take it from from there with returning to stock ROM. Please show me how you did this. Thanks!
Daddyoyah said:
I'm in the same situation and need to charge my bricked XT910. If I can only do it the way you did, I could take it from from there with returning to stock ROM. Please show me how you did this. Thanks!
Click to expand...
Click to collapse
Motorola Fastboot/Factory Programming Cables Links
Sent from my XT907 using Tapatalk
unable to root no matter what method i try.
i have updated the drivers, tried 3 different methods two of this forums one was zergush i believe.
still no use
phone is a lagathon with all this moto crap and other stuff want to get rid of it asap
any help or ideas ?
razr xt 910 running ics 4.04 fido canada
Did you tried this one?
http://forum.xda-developers.com/showthread.php?t=1710871
Always worked for me
Well, you need to tell us what went wrong by describing step by step what did you do and what were the outcomes. Crystal balls are scarce these days.
Sent using a touch screen
Napisane na ekranie dotykowym
Vatazhka said:
Well, you need to tell us what went wrong by describing step by step what did you do and what were the outcomes. Crystal balls are scarce these days.
Sent using a touch screen
Napisane na ekranie dotykowym
Click to expand...
Click to collapse
i followed the options in the op and they didnt work.
i installed the drivers, checked all the stuff in developer options and ran the software. and it just says rooting and nothing happens to my phone that is what i did. i tried the link that is posted above but no luck at all. my phone is recognized by pc that it is connected but nothing happening to it.
plus i tried to rsd lite to reinstall ics and in fastboot mode my pc is not able to pick up the usb. maybe the pc is not picking up the usb drivers i dont understand why that would be happening....if so....
still no luck guys please help
i tried reinstalling the ics through rsd lite and now im stuck in fastboot window and the error i keep getting is 6/21 from the rsd lite....
any ideas how to get out of this mess now ?
naifs_br10 said:
i tried reinstalling the ics through rsd lite and now im stuck in fastboot window and the error i keep getting is 6/21 from the rsd lite....
any ideas how to get out of this mess now ?
Click to expand...
Click to collapse
Go buy a good usb cable just to be sure. And use another comp (install drivers, rsd). Go to fastboot mode and verify if says usb connected.
Flash with RSD
R: [Q] unable to root
Try this method http://forum.xda-developers.com/showthread.php?t=1453660
It worked for me!!
Sent from my XT910 using xda app-developers app
heblu said:
Go buy a good usb cable just to be sure. And use another comp (install drivers, rsd). Go to fastboot mode and verify if says usb connected.
Flash with RSD
Click to expand...
Click to collapse
i was using a factory cable DOH
savezia said:
Try this method http://forum.xda-developers.com/showthread.php?t=1453660
It worked for me!!
yes it worked once i got rid of the factory cable and used the normal cable lol
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
thanks guys for all your help appreciate it
hello everyone,
guys I am "desperate".
well, I was using the rom LiquidSmooth v2.4 on my razr XT910 was two weeks and everything was fine, so that before yesterday stopped recognizing my usb cable. I made several tests and ended up deleting my internal and external memory (pure stupidity), along with my backup. Now my phone does not pass the motorola logo screen, and I can only enter the Native motorola recovery.
My cel is not being recognized by the usb cable, or in fastboot, ie, do not have to use RSD.
With that, I wish someone, a good soul, can provide a nandroid of a rom to be performed via native razr recovery. (remembering that the rom I used was 4.2.2 jb and my cel is retail.en.eu)
Man, already tried everything, so I have left it. I can not lose this cel, I have no money to buy another (student is a sh all poor. Hehe)
if anyone has another idea of how to fix my cel is welcome.
if you can help me thank you very much ...
ps: very good initial video for noobs, kkkkk
ps ²: do not speak English very well, so I used google translator, sorry an error.
Rafael_Slomski said:
hello everyone,
guys I am "desperate".
well, I was using the rom LiquidSmooth v2.4 on my razr XT910 was two weeks and everything was fine, so that before yesterday stopped recognizing my usb cable. I made several tests and ended up deleting my internal and external memory (pure stupidity), along with my backup. Now my phone does not pass the motorola logo screen, and I can only enter the Native motorola recovery.
My cel is not being recognized by the usb cable, or in fastboot, ie, do not have to use RSD.
With that, I wish someone, a good soul, can provide a nandroid of a rom to be performed via native razr recovery. (remembering that the rom I used was 4.2.2 jb and my cel is retail.en.eu)
Man, already tried everything, so I have left it. I can not lose this cel, I have no money to buy another (student is a sh all poor. Hehe)
if anyone has another idea of how to fix my cel is welcome.
if you can help me thank you very much ...
ps: very good initial video for noobs, kkkkk
ps ²: do not speak English very well, so I used google translator, sorry an error.
Click to expand...
Click to collapse
I'm not sure if this will fix your problem, but do you have the proper drivers installed on your computer? Try installing them (https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481) and then plugging it in. If it works, you can use Matt's Utility (http://forum.xda-developers.com/showthread.php?t=2192467) to restore to stock.
life isgood said:
I'm not sure if this will fix your problem, but do you have the proper drivers installed on your computer? Try installing them (https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481) and then plugging it in. If it works, you can use Matt's Utility (http://forum.xda-developers.com/showthread.php?t=2192467) to restore to stock.
Click to expand...
Click to collapse
thanks man, but already tried installing all the drives, but not forward ... already many tests, including other computers but I can not that my phone is recognized by usb. I think it is hardware problem from my phone ... I found the little that has not as installing a nandroid recovery by native, so if I do not get the computer to recognize my phone, there is no hope for me.
The only thing I can think of would be to try out one of these http://shop.teamblackhat.info/Factory-style-programming-cable-for-Motorola-FactCable.htm and hope the computer recognizes it. Anybody else know if this would work if the computer doesn't recognize the phone at the moment?
My razr was freezing and had no usb connectivity at all... factory cable was the solution. Ordered mine on e-bay. :good:
jacobs7th said:
My razr was freezing and had no usb connectivity at all... factory cable was the solution. Ordered mine on e-bay. :good:
Click to expand...
Click to collapse
I sent my phone for technical assistance .. any news I notice everyone
Get a factory cable flash fastboot files. Through rsd lite and your good to go
Sent from my Optimus G using Tapatalk 4 Beta
naifs_br10 said:
Get a factory cable flash fastboot files. Through rsd lite and your good to go
Sent from my Optimus G using Tapatalk 4 Beta
Click to expand...
Click to collapse
Agreed. Factory cable and RSD unbricked my phone and all I had left was bootloader. I'd flashed an ICS recovery on JB and even killed the android recovery.
Sent from my XT912 using xda app-developers app