Related
Well, at just 3 weeks my Photon is dying and will be exchanged this morning. The problems started today when the phone started rebooting on its own several times. When I plug in the charger it doesn't charge at all and when I plug into a USB port I get no indication on the phone and Windows report an unrecognized device. I do have the correct drivers installed and all worked well earlier. I've tried several chargers to no avail. Off to Sprint in the morning! If anyone has any tips on this issue I'm all ears!
newalker91 said:
Have you used RSDLite to flash the CM5 SBF? I've seen this issue on phones that arent updated properly.
Click to expand...
Click to collapse
I did the OTA update and it worked fine for a few days and I thought about redoing it with RSDLite but, as I mentioned, I have no USB connection now so I can't connect to a PC and, even if I could, the battery is almost dead and can't be charged through the USB port. So I appear to be stuck for now even if I could charge the battery externally. I called Sprint and they authorized an exchange so I think that's probably my only option unless they can fix it while I wait.
looks like a bad micro usb port case.
double post
My Nook charges fine when turned off but does not charge at all when powered on. My nook also does not show up as a connected device when I plug it into my computer. I am rooted running CM9. Any advice?
Thanks
mikenexus said:
My Nook charges fine when turned off but does not charge at all when powered on. My nook also does not show up as a connected device when I plug it into my computer. I am rooted running CM9. Any advice?
Thanks
Click to expand...
Click to collapse
IF you mean that it doesn't charge while the screen is on and connected to the PC, that's normal behavior... the current draw is too much for the USB port to maintain the operational draw as well as provide any extra to charge it. Most of the time, you'll notice that you're actually still losing charge even though it's plugged into the PC... albeit at a much slower rate than usual.
As far as it not being recognized... what do you mean? You don't get the drives mounted? It's not being recognized by ADB? There's plenty of threads related to ADB, try giving it a search. If you mean that the drives aren't being recognized, you have to have a SD card in and turn on USB Sharing (or whatever it's actually called) it should be in the notification area.
Thanks for the reply,
It does not charge from an outlet while powered on; only when powered off.
What I mean in regards to it not showing up on the PC: I plug it in and it does not even recognize a device is plugged in - I don't even get to the install new drivers part. Its as if nothing was ever plugged to begin with.
The nook is recognized when I use my galaxy nexus usb cord and attach it to the computer. I am starting to think this is a hardware issue; I just find it strange that the hardware works as intended while the Nook is powered off.
Mike
There's a chance that you have a broken Nook cable then.
Try getting a battery monitoring app to see what sort of current you're getting while it's on. Is the "n" on the cord lighting up while it's plugged in and on?
Yes, when it is on and plugged in the "n" is green no matter the charge
I think you should try a different Nook cable, they can do that for you at B&N's actual store without you having to buy a new cable. If that doesn't work I would wager that it would be the port.
Now, I feel I should point out that for reasons unknown to me that manual specifically says you should not plug the unit in to charge while the unit is off. As I said, I don't know why. I know I have done that with my iPhone when I need a really fast charge (plug it in, then turn it off) but never had to do that with the Nook. Just... Some FYI for you.
About a month ago this charging problem started overnight. Using the original wall charger and USB cable, current_max in GCC was about 200mA (instead of 1000mA). Somebody suggested a factory reset, which I did (restored apps and settings with TB). Problem still exists and is getting worse. Till now I was able to unplug and replug the charger a few times to bring it up to 1000mA, but now the current randomly goes down during the charge (esp if I use the phone).
The only thing I haven't tried is replacing the charger or cable, but I don't have another one. Any suggestions? Thanks.
how did you check this? an app?
fromanbr said:
how did you check this? an app?
Click to expand...
Click to collapse
Yes, used Galaxy Charging Current.
https://play.google.com/store/apps/details?id=com.abmantis.galaxychargingcurrent
I think it's down to a damaged usb port on the phone. I have pretty much the same thing on my phone since the cable was yanked out of it whilst charging a few months ago. I have several chargers and some are better than others...depending on the cable. I also have issues with connecting to my pc....I have to not touch it otherwise it just disconnects.
deafmetal said:
I think it's down to a damaged usb port on the phone. I have pretty much the same thing on my phone since the cable was yanked out of it whilst charging a few months ago. I have several chargers and some are better than others...depending on the cable. I also have issues with connecting to my pc....I have to not touch it otherwise it just disconnects.
Click to expand...
Click to collapse
But I have no other problem using the USB port apart from this? Is there anyway I can check it? Or shall I just wipe the phone and send it to be replaced?
Help! My Samsung Galaxy S4 won't charge or connect to a computer. I've tried different chargers, cables, plug in locations, car, 110, computer. There is no dirt. Connection is clean. I have a spare battery and both of them will charge on the battery charger. I have tried backed up roms. I have done a factory reset.
All of this and nothing helped. Am willing to try anything. Verizon is going to send me a refurb.
Help please.
Sent from my SCH-I545 using Tapatalk 4 Beta
Is there any indication of a connection being made? If not, you should just wait for the refurb. If you have rooted, I really doubt Verizon will honor the warranty on the broken phone. I wish you the best.
Sent from my SCH-I545 using xda app-developers app
sounds like contacts are on the phone side are damaged or the micro usb port is damaged.
Have you plugged into to a pc just to see if it can "see" the device and connect?
You stated it cannot connect to a pc, so i would suspect you have a bad micro usb port.
if you can connect, its not the port, and try taking an eraser and gently swabbing the contacts on the phone side.
also, make sure when you insert the battery there is an actual contact established. sometimes when pulling/pushing the battery in and out, those contacts sink further into the device and finally when you insert a batter the contact is very poor. you may need a tool or tweezer to just VERY, VERY GENTLY raise the contacts if they sunk in to far......but be careful not to pull too hard/much they can snap and you will probably void any warranty......
vwpiper said:
Help! My Samsung Galaxy S4 won't charge or connect to a computer. I've tried different chargers, cables, plug in locations, car, 110, computer. There is no dirt. Connection is clean. I have a spare battery and both of them will charge on the battery charger. I have tried backed up roms. I have done a factory reset.
All of this and nothing helped. Am willing to try anything. Verizon is going to send me a refurb.
Help please.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
xander45 said:
sounds like contacts are on the phone side are damaged or the micro usb port is damaged.
Have you plugged into to a pc just to see if it can "see" the device and connect?
You stated it cannot connect to a pc, so i would suspect you have a bad micro usb port.
if you can connect, its not the port, and try taking an eraser and gently swabbing the contacts on the phone side.
also, make sure when you insert the battery there is an actual contact established. sometimes when pulling/pushing the battery in and out, those contacts sink further into the device and finally when you insert a batter the contact is very poor. you may need a tool or tweezer to just VERY, VERY GENTLY raise the contacts if they sunk in to far......but be careful not to pull too hard/much they can snap and you will probably void any warranty......
Click to expand...
Click to collapse
I am having the exact same problem. I have replaced the microUSB charging port on the phone and it still doesnt charge with the new port. I'm not sure what is going on. NEED HELP BIG TIME!!!
I'm having the same problem as well. It has been like that for bout a month or so now. I googled it and it seems to be a problem with the s3's and s4's. I'm not so worried about it as I have a spare battery charger and I have the wireless charging receiver on my s4 and it charges my phone just fine.
I had this exact problem I believe...tried several different chargers...everthing. Try turning the phone off and see if it takes a charge. When mine was off it would show a gray battery and vibrate every 5-10 seconds. I figured it was an issue with the charging/usb port but all of the sudden my phone started charging normally and is visible by a computer. Lasted for about 4 days and have been in the clear for about 3 days now. No clue what went wrong or why, but try what I mentioned above by charging with phone off for a half hour or so and see if it has charged at all. If you need a new USB port, not all GS4's have the same port, so you must get a verizon specific one (ebay). usually run about $20..or $65 installed at a phone fixing center. I didnt want to lose MDK, so I was prepared to just charge externally, but ended up not having to...yet
It happened to me also. I had some intermittent luck with blowing out the port with air from my air compressor. But in the end it just stopped working and Verizon sent me a refurbished one.
I Also have this problem!
PLEASE HELP!
I don't know why but my international galaxy s4 running cm 10.1.3 stable isn't charging...
I plug it in to the wall and nothing happens its as if the phone doesn't even know it's plugged in...
pcmaster44 said:
PLEASE HELP!
I don't know why but my international galaxy s4 running cm 10.1.3 stable isn't charging...
I plug it in to the wall and nothing happens its as if the phone doesn't even know it's plugged in...
Click to expand...
Click to collapse
Have you tried powering down your phone and seeing if that gray battery comes up and you get the vibrations (while plugged into charger)? You may need a new port, but since your under warranty, you could get a replacement unless you want to charge externally
S4 problem after update to 4.3
Hy,
I have a similar problem with my S4 (i9505), won't indicate if it is charging or connect to a computer, but while the charger is conected to S4, the battery level is increasing. When the battery is fully charged S4 is SHUTING DOWN!!!! And it wont start by pressing ON/OFF button, it will only start after I press Vol Down+Power, after goes to Download Mode and press Vol Down .
Tryed in many ways to fix:
- restore-
- hard reset
- changed te battery and charger
-i\ve changed even the usb port (flex cable) and =no results...
All problem started after update to 4.3.... and it is not an isolated case too many people complains about this 'awesome smartphone' with 'awesome issues' .
So, if anyone have any ideea how to solve this issues....
{Sorry for my bad english}
Had the same problem...lasted for about a day, I had to take a dry q-tip and clean the charger and the port where the phone charges and was able to get it working again. If you are rooted and are having issues go to amazon or ebay and get a wireless charger and it should take care of your problems as well
templton said:
Had the same problem...lasted for about a day, I had to take a dry q-tip and clean the charger and the port where the phone charges and was able to get it working again. If you are rooted and are having issues go to amazon or ebay and get a wireless charger and it should take care of your problems as well
Click to expand...
Click to collapse
Ok....wireless charger...but what about syncing with the PC?
Now I have JB 4.3 , for a custom ROM I need to use usb cable to connect to PC, rigth?.
For me it is annoying, because I do not know for sure if this is caused by updatind to 4.3 or is a harware problem.
My wife's phone had this issue last night and this morning; charger or computer, it wouldn't charge. I turned it off, took out the battery, SIM and uSD card and put them all back in. After that it started charging again. I don't know if this will solve the problem long term, but so far it seems to have done the trick...
NC_user said:
My wife's phone had this issue last night and this morning; charger or computer, it wouldn't charge. I turned it off, took out the battery, SIM and uSD card and put them all back in. After that it started charging again. I don't know if this will solve the problem long term, but so far it seems to have done the trick...
Click to expand...
Click to collapse
Lucky you...I did more than that, but no result in my case. I found on ''community.verizonwireless'' many more similar cases where ''customers support'' tried to avoid giving the answers for a real solution.
Well, our luck didn't hold. My wife's S4 wouldn't charge again last night. I tried another Samsung charger and a different cable but it wouldn't work either. When we left the house she tried it on the car charger and it worked great. Trying various other chargers we found that a kindle charger wouldn't work, but other third party chargers would. Even her PC USB port seems to work and she doesn't have the drivers loaded. For now she replaced the Samsung charger and cable that came with her phone for one that came as part of an accessory pack and it's happy again.
I have no idea what's going on with the thing. I asked one of the guys at the Samsung booth in Bestbuy and all he had to offer was reflashing the ROM or un-rooting it and doing a warranty exchange...
NC_user said:
For now she replaced the Samsung charger and cable that came with her phone for one that came as part of an accessory pack and it's happy again.
......and all he had to offer was reflashing the ROM or un-rooting it and doing a warranty exchange...
Click to expand...
Click to collapse
Can you check, please, if your new data cable has 4 or 5 pins(look to the side that connects to your phone )?
My first s4 done this. So I ended up with a replacement mdk phone after I figured out if you bend the lil piece in the charging port of your phone (not too much BTW) the charger will slide into the port as it's meant to.
Sorry I can't remember the tech term for that lil pin inside the charging port.
Sent from my SCH-I545 using Tapatalk
vwpiper said:
Help! My Samsung Galaxy S4 won't charge or connect to a computer. I've tried different chargers, cables, plug in locations, car, 110, computer. There is no dirt. Connection is clean. I have a spare battery and both of them will charge on the battery charger. I have tried backed up roms. I have done a factory reset.
All of this and nothing helped. Am willing to try anything. Verizon is going to send me a refurb.
Help please.
Click to expand...
Click to collapse
Just going to throw this out there....
I think the S4 is compatible with QI compliant wireless chargers. Amazon has some that are only $20... might be worth the purchase.... hell if I didn't have this tank of a case on I would buy it.
http://www.amazon.com/Lerway-Wireless-Power-Charger-Lumia920/dp/B00E9MUNWU
blueangel0508 said:
My first s4 done this. So I ended up with a replacement mdk phone after I figured out if you bend the lil piece in the charging port of your phone (not too much BTW) the charger will slide into the port as it's meant to.
Click to expand...
Click to collapse
Thanks for your answer, but I already did that....I even changed the flex cable with charging port, no luck for me.....
I think this issue it is not hw problem because, look what I did today:
-I put a new Rom , so I used MIUI FOR I9505 from http://forum.xda-developers.com/showthread.php?t=2306650
And now it behaves even stranger:
S4 is ON and wall charger is conected, (LED IT IS OFF but BATTERY IS BLINKING and is charging ) after battery level go up to 100% and disconect the charger, the LED STARTS TO LIGHT GREEN!!!!
So, now shows that is charging when charger is NOT connected?
alexmanu said:
Thanks for your answer, but I already did that....I even changed the flex cable with charging port, no luck for me.....
I think this issue it is not hw problem because, look what I did today:
-I put a new Rom , so I used MIUI FOR I9505 from http://forum.xda-developers.com/showthread.php?t=2306650
And now it behaves even stranger:
S4 is ON and wall charger is conected, (LED IT IS OFF but BATTERY IS BLINKING and is charging ) after battery level go up to 100% and disconect the charger, the LED STARTS TO LIGHT GREEN!!!!
So, now shows that is charging when charger is NOT connected?
Click to expand...
Click to collapse
Huh that's weird. How did you get miui to run on our phone? You've got the i545 right? I've been jonesing for miui ha.
As for the issue wish I could help you out...thought pushing that part would work
Sent from my SCH-I545 using Tapatalk
Hey guys,
Just got the 5.1.1 update to my g watch and i noticed some charging differences, namely i can no longer charge my watch with my pc (its an always on pc). I checked cables etc and all are fine, and it will still charge through an AC outlet. Ive tried usb 2.0 and 3.0 ports.
Just wondered if anyone else had noticed this behaviour? The charging indicator wont even show up when its plugged into my pc. Also noting that usb debugging still works through my pc and all is detected fine there
Norman
manor7777 said:
Hey guys,
Just got the 5.1.1 update to my g watch and i noticed some charging differences, namely i can no longer charge my watch with my pc (its an always on pc). I checked cables etc and all are fine, and it will still charge through an AC outlet. Ive tried usb 2.0 and 3.0 ports.
Just wondered if anyone else had noticed this behaviour? The charging indicator wont even show up when its plugged into my pc. Also noting that usb debugging still works through my pc and all is detected fine there
Norman
Click to expand...
Click to collapse
I have the same update, and have the same problem as you, I only noticed it last night when I put it on to charge, I charge mine every night on the same usb port and have had no problems till last night, like yours mine will only charge from mains now, I've tested all my usb ports and they are all working okay. I hope some one has an answer for it.
I´ve checked this and mine works perfectly with a 5m cable connected to a usb hub. I´ve checked with other cables and without hub, and this still works.
I was able to address the issue by rebooting the watch.
JohnnyK58 said:
I have the same update, and have the same problem as you, I only noticed it last night when I put it on to charge, I charge mine every night on the same usb port and have had no problems till last night, like yours mine will only charge from mains now, I've tested all my usb ports and they are all working okay. I hope some one has an answer for it.
Click to expand...
Click to collapse
So do i! Usb ports are working fine, my pc is custom built so i have specific ports designed for quicker charging of anything plugged into them
NYCArcana said:
I was able to address the issue by rebooting the watch.
Click to expand...
Click to collapse
If i reboot the watch whilst it is on the charger, it charges via usb in my pc - but if i take it off and put it back on, the problem returns, despite it still working with an AC charger, i'm assuming this is a software problem as android knows when its charging via usb or AC anyway. Hopefully a dev over here or the LG guys will fix it - i don't want to have to restart my watch every time i want to charge it, it's a pain in the arse and i shouldn't have to do it - i have a lack of AC ports in my room, hence i charge through my pc
manor7777 said:
If i reboot the watch whilst it is on the charger, it charges via usb in my pc - but if i take it off and put it back on, the problem returns, despite it still working with an AC charger,
Click to expand...
Click to collapse
Just checked - same behavior here.
Always fun to be a beta tester for Google. At least there's a workaround.
NYCArcana said:
Just checked - same behavior here.
Always fun to be a beta tester for Google. At least there's a workaround.
Click to expand...
Click to collapse
haha well, i can use an AC power source and charge my phone in my pc, they are both super close to me just my phone takes longer to charge
My watch was slower to charge I did notice that. Took an entire extra hour!
I have the same problem but I posted in the wrong thread (LG G Watch General)
http://forum.xda-developers.com/g-watch/general/watch-charging-update-to-5-1-1-t3115504
Hi
I have 2 chargers because I use one for travel. After updating to 5.1.1, one works and the other does not. I swapped the components and found it was the cable. I hope that this helps.
hallevison said:
Hi
I have 2 chargers because I use one for travel. After updating to 5.1.1, one works and the other does not. I swapped the components and found it was the cable. I hope that this helps.
Click to expand...
Click to collapse
All my cables seem to produce the same result, maybe it's just me - i tried the one that came with a quick charge charger and even that does the same thing. hmm, will pick up a new cable tomorrow and check it out!
I just had my watch on the charger and with out taking it off, restarted it and now it is charging. Definitely a bug of some sort
sent from a device using an app
manor7777 said:
All my cables seem to produce the same result, maybe it's just me - i tried the one that came with a quick charge charger and even that does the same thing. hmm, will pick up a new cable tomorrow and check it out!
Click to expand...
Click to collapse
I wouldn't bother. Some chargers just behave like USB devices to be able to charge older Blackberrys. I used the same cable with the PC and with a wall wart. Only the wall wart works unless I reboot the watch.
Thanks, most people seem to confirm its a bug.. That's what I love about xda, you can always find things like this. Thanks for all your help.
Hi, glad I found this thread.
I am having the same problem. It doesn't charge since the 5.1.1 update, but if it lays on the charger and I reboot it, it charges. If I take it off and put it back on, it doesn't charge and I need to reboot it again.
Have the same problem. After reboot, it charges on usb much slower but doesn't look like it (No charging icon). Otherwise I love the update.
Did you all factory reset after updating your watch? I also couldn't charge until I rebooted but it charges fine after the reboot.
Same issue
I can confirm the same behaviour. I have to reboot the g watch and then it start charging. Definitely a bug
Same here, watch was charging wen I went to sleep but charging stopped at around 60%
Verstuurd vanaf mijn Nexus 5 met Tapatalk
I've expressed my frustration over at the Android Wear help forum:
https://productforums.google.com/fo.../VRbw2FWOaiI;context-place=forum/android-wear
Oddly, my watch did NOT include the wall charger even though I got it new from Best Buy. Did anyone else not get a wall charger? I'm not the type to just blindly miss something as useful as a USB wall charger. I remember opening it up and saying to myself, "I guess I'll have to use my monitors USB port." I don't throw that stuff out. I still have the box and all the packing materials as well, and it's nowhere in there.