Jtag Repair Help - HTC Droid DNA

Hello guys..i need some help..I live in Greece, so i am outside U.S obviously...HTC can't receive the device because i use it on a non supported country..So my DNA stopped working suddenly..i went to sleep and everything was ok..when i woke up it was closed..it was strange as i left it with 65% battery when i went to sleep....i plug it into charger and a red light blinking inside the speaker grills....it won't open at all....pc recognizes it when i plug it but as an uknown device...and also it get's a little warm when i had it for about 2h in the charger.......so as HTC can't repair it....and any shop here can't...If i send it for jtag repair can they fix it?or at least try??

Anyone??

Djmk4 said:
Anyone??
Click to expand...
Click to collapse
have you tried manual reboot?? hold the power button and volume down for more the 30s

It's hard bricked.....don't responding... Only a Red flash blinking inside speaker grills when I plug it into charger

Let it sit on the charger for a while a red blinking light typically means the battery is dead and is in too low of a power state to boot the phone.

Try to unplug the battery, leave unpluged an hour, and the plug in again.
For this, you will need to open the phone, there are a lot of tutorials here about how to open the DNA.
They are bad news anyway.

Related

Bricked G4 not (!) again: Charge LED does not light on power-connection

Hi there,
I have a special question to my G4 witch i do not get in operation anymore: The Problem is, that the device does not turn on, independent any keys. Either the ON-Button, Soft-Reset, Hard-Reset i do not get any of the "normal" screens. The display does not light.
Additional, the red power-charge-LED does not light when i plug in the USB-poer-supply. The same, if i disassemble the battery and plug the G4 to the power-supply...
The device has not been used for a couple of months. The last action a Upgrade to WM6.5 that worked definitively fine for a while.
Has anybody an idea? Or happend before?
Thanks in advance
Ernie
i think it`s easy
hey .. i doubt you have a problem with your g4 phone, i think you have a problem with the battery. since you left the batter inside the phone for alot of months and you didn`t use it, i think the battery is super dead, so dead, that the g4 cant power off and go to charge mode. 1 : you could try letting it charge more, like .. 1 hr plugged in , orrr , you could find an universal charger, which charges the battery by touching it`s + and - with it`s pins and putting electricity in it. (sorry for the bad explanation but i`m from romania). I think one of them two should work, if you know some other friend who has a working g4 just try with his battery. Good luck ! ^_^
Thanks for your reply.
But it happens without (!) the battery: If disassemble the battery and connect afterwards the power cable, the red LED does not flash, and no key has a function. As Soft-Reset "switch" and Hard-Reset (2-button on the left plus Soft-Reset-Switch)
First i mentioned the same as you thought...
Has anybody an idea what can be done here?
Thanks in advance.
Ernie
I'm encountering this same problem. I let the device charge over night with no luck. It will not power on at all. The battery was working fine last week. its completely dead
My Universal turn on the red LED for a seconds and after that do not charge and do not turn on. Have you find any solutions?
Thanks
exactly the same problem here on touch 3g
i got my touch 3g in Jan 2009 in Shanghai,China. Now i'm in singapore.... it's bricked, i didn't do anything wrong, it's not dropped on the ground or into the water, yesterday it was fine, but this morning i just found that it's power off. plugging in the power cable , and i won't see the orange power led. it's completely dead, soft reset and hard reset can not be initiated, because it refuses to power on.
i'm going to htc care center at harbourFront next weekend ...
JeromeMorrow said:
My Universal turn on the red LED for a seconds and after that do not charge and do not turn on. Have you find any solutions?
Thanks
Click to expand...
Click to collapse
oglop said:
i got my touch 3g in Jan 2009 in Shanghai,China. Now i'm in singapore.... it's bricked, i didn't do anything wrong, it's not dropped on the ground or into the water, yesterday it was fine, but this morning i just found that it's power off. plugging in the power cable , and i won't see the orange power led. it's completely dead, soft reset and hard reset can not be initiated, because it refuses to power on.
i'm going to htc care center at harbourFront next weekend ...
Click to expand...
Click to collapse
You’re in the wrong section this is the Wizard forum.
I use a universal charger. Its one which takes the battery not one which plugs into the phone ...
whenever I let my phone run flat I leave the battery in the charger for a couple of hours then put it back in the phone and connect the phone charger. Once there are enough electrons whizzing around in the battery there's enough power to drive the IC that manages the charging in the phone ...
if the battery is too flat it won't even open the gates for you ...

[Q] My ZU wont switch on. Red LED

This morning, my Z ultra died on me. It wont start, no vibration, no use pressing vol + power buttons and the red switch. I was neither rooted or bootloader unlocked.
When I tried to connect it to my laptop (Windows 7), its shows as a USB device. The red LED flashes up, the computer finds it and then lets go of it again. Again in a few minutes, the red LED goes up , the computer makes the connection sound and then the red LED goes off again. This cycle goes on and on.
I cannot use SEUS, Flash, Fastboot or do anything. I have checked various forums and apparently I have not hard bricked the phone as the LED still works and the computer recognizes the problem. But no one has given any concrete solution.
When I connect it to the charger which came with the phone, the red LED pops up and then goes off again. I dont know if its charging. HOWEVER, I have used another Chinese Travel Charger, and then the red LED stays solid as if its charging. I dont know what it means.
Please help. I spent a lot behind this phone. I dont want to be left with a brick
It's not an issue if it's completely stock is it? You have your warranty, but i understand that i sucks to have it shipped in for repairs for god knows how long. I had a similar issue some time ago, but i'm bootloader unlocked and what not, so that was pretty easy to fix. You're completely stock though, so it's a little harder to do anything.
What happens if you hold VOL UP when you connect it to your computer? Does a blue LED light up? If yes, does it stay on, or does it disappear? What happens if you hold VOL DOWN when you connect it to your computer? Do you get a blinking LED and then nothing? That's normal, and it's going into Flashmode. If you can get it to stay in Flashmode you'll be able to re-flash a ROM in Flashtool. But be 100% sure to have enough battery, or else you'll be in danger of hard bricking it.
So..
- Plug the wall charger in and charge it for a couple of hours (2-3 hours)
- Try to kick it into Fastboot (VOL UP when you connect it to your computer). Look for blue LED.
- Try to kick it into Flashmode (VOL DOWN when you connect it yo your computer). No LED.
Hi LordManhattan. I dont have any warranty as I brought it from a local reseller .
Whether I press Vol UP or vom DOWN when I connect to the laptop, a red LED pops up, there is a connection sound and after that the red LED goes off and and there is a disconnection sound.
If I leave the phone connected with the computer, the phone gets connected after 2/3 minutes, there is a connection sound and then there is a disconnection sound again . Any clue what I can do :crying::crying:
LordManhattan said:
It's not an issue if it's completely stock is it? You have your warranty, but i understand that i sucks to have it shipped in for repairs for god knows how long. I had a similar issue some time ago, but i'm bootloader unlocked and what not, so that was pretty easy to fix. You're completely stock though, so it's a little harder to do anything.
What happens if you hold VOL UP when you connect it to your computer? Does a blue LED light up? If yes, does it stay on, or does it disappear? What happens if you hold VOL DOWN when you connect it to your computer? Do you get a blinking LED and then nothing? That's normal, and it's going into Flashmode. If you can get it to stay in Flashmode you'll be able to re-flash a ROM in Flashtool. But be 100% sure to have enough battery, or else you'll be in danger of hard bricking it.
So..
- Plug the wall charger in and charge it for a couple of hours (2-3 hours)
- Try to kick it into Fastboot (VOL UP when you connect it to your computer). Look for blue LED.
- Try to kick it into Flashmode (VOL DOWN when you connect it yo your computer). No LED.
Click to expand...
Click to collapse
LordManhattan said:
- Plug the wall charger in and charge it for a couple of hours (2-3 hours)
- Try to kick it into Fastboot (VOL UP when you connect it to your computer). Look for blue LED.
- Try to kick it into Flashmode (VOL DOWN when you connect it yo your computer). No LED.
Click to expand...
Click to collapse
just a small note or two:
Flashmode the LED should go orange, then blue then off within about 1second then it is in Flashmode
To get into either of these modes the phone has to be powered fully OFF, press the red reset button before charging to make sure, then again just before the above steps.
It sort of sounds like a corrupted loader
showdown_counts said:
Hi LordManhattan. I dont have any warranty as I brought it from a local reseller .
Whether I press Vol UP or vom DOWN when I connect to the laptop, a red LED pops up, there is a connection sound and after that the red LED goes off and and there is a disconnection sound.
If I leave the phone connected with the computer, the phone gets connected after 2/3 minutes, there is a connection sound and then there is a disconnection sound again . Any clue what I can do :crying::crying:
Click to expand...
Click to collapse
Hmmm... This is a tough one..
Sent from my C6806_GPe using Tapatalk
Please someone help me. Really need to do something here
LordManhattan said:
Hmmm... This is a tough one..
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
Have a good read of this? http://forum.xda-developers.com/showthread.php?t=1849170
It would suggest that the battery is flat. Let it charge in the wall plug for a few hours and see what happens
I have let the phone to charge overnight with the charger that came with the phone. As I said before, with that charger, the red LED would turn on and then go off again. I will hopefully try the Chinese travel charger tonight with which the red LED remains solid.
The funny thing is , the phone had about 80% charge when it died. This is so weird :'(
What You Do Before It Happen?
Sent from my C6833 using Tapatalk
Nothing. Its like as if the phone soft bricked itself, probably by auto updating or something
showdown_counts said:
Nothing. Its like as if the phone soft bricked itself, probably by auto updating or something
Click to expand...
Click to collapse
Have you tried the reset button under the microsd flap? Press and hold for 3 secs.
I did read another user had an issue where the screen blanked for around a day, he left it plugged in and came back to it about 6 hours later and it was fine again.
Sent from my C6833 using XDA Premium 4 mobile app
I tried that and basically all the other normal options. No use. The computer recognises it as a USB Input Device and for a second or two, the red LED comes up. Same thing when I am charging
SpyderTracks said:
Have you tried the reset button under the microsd flap? Press and hold for 3 secs.
I did read another user had an issue where the screen blanked for around a day, he left it plugged in and came back to it about 6 hours later and it was fine again.
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
showdown_counts said:
I tried that and basically all the other normal options. No use. The computer recognises it as a USB Input Device and for a second or two, the red LED comes up. Same thing when I am charging
Click to expand...
Click to collapse
It's a battery issue most probably. I guess it doesn't show anything. Is your battery removable?
I still have not opened my phone. I am looking at all the other options first. If everything else fails, I guess I will have to open my phone
showdown_counts said:
I still have not opened my phone. I am looking at all the other options first. If everything else fails, I guess I will have to open my phone
Click to expand...
Click to collapse
I know it isn't the best choice but I would suggest getting it to sony repair. So that your waranty isn't voided (even if you have bought from a local store you still have waranty
Andrewasth said:
I know it isn't the best choice but I would suggest getting it to sony repair. So that your waranty isn't voided (even if you have bought from a local store you still have waranty
Click to expand...
Click to collapse
Warranty exists with Sony for first year, no matter where it's bought, very true.
Sent from my C6833 using XDA Premium 4 mobile app
+1 contact your local sony, i had a similar problem, no fastboot/flashmode. locked bl/not rooted and my led only flashed red and occasionally solid red then nothing. plugging it into computer continuously played the disconnecting sound.
most likely hardbricked.
i also purchased my xzu from a local BST but as long as you have your imei, contact sony and theyll tell you if you have warranty. they required me to send in proof of purchase as well but like most say "play stupid" ( i said i received it as a gift and they said it was fine)
i got a brand new XZU after a week and a half sending it in.
LordManhattan said:
- Plug the wall charger in and charge it for a couple of hours (2-3 hours)
- Try to kick it into Fastboot (VOL UP when you connect it to your computer). Look for blue LED.
- Try to kick it into Flashmode (VOL DOWN when you connect it yo your computer). No LED.
Click to expand...
Click to collapse
Thank you! One or two years ago my Z Ultra's screen cracked and I got a new phone. Decided to use it again, purchased a new screen and replaced it myself today. When I tried to move to AOSP (had root, bootloader unlocked, backup of TA partition), the phone bricked. No SONY logo, nothing. Did what you said above, Xperia Companion recognized the phone in flashmode and is now downloading the newest stock rom. I was so afraid of a hard brick, that living with latest stock without root doesn't seen so bad now hahaha
Hey Friends, I have exactly the same issue. The red led just flashes up for a couple of seconds and this cycle continues. My battery was a bit swollen up and the back glass cover opened up a bit. Still battery was working fine. Two days ago I tried nougat aosp on it and after leaving it idle for 2 hours, it was bricked. I can enter into flashmode and flashed stock LP as well as KK but it does not boots up. Is it definitely battery's problem? If yes, where can I buy original or near original battery for it?
lifehacker69 said:
Hey Friends, I have exactly the same issue. The red led just flashes up for a couple of seconds and this cycle continues. My battery was a bit swollen up and the back glass cover opened up a bit. Still battery was working fine. Two days ago I tried nougat aosp on it and after leaving it idle for 2 hours, it was bricked. I can enter into flashmode and flashed stock LP as well as KK but it does not boots up. Is it definitely battery's problem? If yes, where can I buy original or near original battery for it?
Click to expand...
Click to collapse
The battery is dangerous and should be removed. Be careful because the battery can burst into flames if the bloated cell get punctured.
Use tools with caution and take your time.
Lipo cells expands as a first safety trigger. Instead of going strait to venting or venting and burst into flames.
Its a safety feature if they are charged with too high current or if the cell is drained below its 2,22 volts and is brought back to life with a normal charger that puts normal current on the cell. Then even 400mA in this scenario is way too much current to start charging a drained cell with.
But the battery should not be the issue that your phone is not booting. How did you flash stock rom? With Flashtool?

[Q] Dead Device ?

hey guys i have an quesion, yesterday my phone stopped working
but odly enough there comes power trought the phone when connect usb i get power on the battery part acording to the multimeter also what i notoced today was that the led at 1st started to blink red while device is off, and then it started to change to solid red and in 15 mins it was green, but phone won't turn on but there is reaction in the phone, i can't spot it on the pc either but i do see that the phone ask power by the hand of the solar charger i have the led turns on when a device ask power, but even if i pull out the battery the phone still ask power witch shouldnt possible when the battery is removed right ?
what can be the cause ?
Try a new battery first.
boomboomer said:
Try a new battery first.
Click to expand...
Click to collapse
what i do noticed to is that the phoe gets quite hot when leave it on charger and the battery to , but phonw wont turn on, also somtimes it viberate but i don see anything on the screen that it charge or something , i think even if the bat is dead the phone should show the charger iicon right ?
Take it to a repair centre, you have a hardware fault.

[Q] Solid Red light when I connected to Charge

im getting solid Red Light when i connected to power. no charging not even recondnice by the computer.. What can i do to power on the phone..
i did hard reset too nothing happend....
i read some article about red light and some says to return to sony store and some says to unplug the battery and reconnect ... i dnt have warrenty to send it to sony.....so " if i change the battery does it works" ?
Sometimes it works with replacing the battery. Sometimes you need a new mainboard ( about 100 $)
I don't know if these "test buttons" works. Then your phone will be recognzied as S1Device and you could use trying S1tool (but i think it does not support Z2 )
Same problem
Hello,
I've got the same problem. No response at all with any button combination or the red reset button.
If I connect the usb cable to charger or PC red LED turns on but nothing else. The PC doesn't recognize it, not even if I connect it with volume down pressed. I opened it and disconnected the battery. With the battery disconnected it has the same behaviour, only red light if connected.
Any ideas of what I could try?
I wouldn't expect a dead battery causing this. I mean, if the phone can get the power from the charger then it should turn on even with the battery disconnected right?
I was thinking to charge it for two days and see if anything happens, just in case. Otherwise I will need to think on how to discharge the battery manually and see what happens.
I don't to buy a new battery unless I am sure that will help...
arretxe said:
Hello,
.. With the battery disconnected it has the same behaviour, only red light if connected.
...
Click to expand...
Click to collapse
What happens if you disconnect the battery, put the charger cable in the phone and then hold the power button and volume up button for like 5 seconds.
Do you get the battery logo on the display then?
No... Nothing at all happens
arretxe said:
No... Nothing at all happens
Click to expand...
Click to collapse
Is it the original loader (Sony, 1500mah) + sony charging Cable?
I have chargers laying around everywhere, and I noticed that sometimes the phone did nothing while using samsung chargers 750mah).
When I put my phone in the charger the light turns red. Nothing on the screen.
When I take out the charger the light stays red for a long time.
But when it is off, and I take the battery out and then put it on the charger (without the battery), then the display shows a battery logo.

Sony Xperia Z Ultra gpe wont charge or turn on. HELP PLEASE!

I left the phone charging. Stepped outside and came back. Found my phone completely dead. It wont turn on or charge. I tried a few method I found online. It doesnt work. The only thing that shows signs of life. Is when I hold the power and up button and plug in the charging usb while still holding the button. Red light blinks. But once I let go of the buttons back to dead. Please help of anybody know to fix this.
Anybody?
Did you completely discharge the battery (0%) before you plugged in the charger? If so, that's a dangerous game to play. Keep it charging for about 24 hours and then try to boot it.
Left it charging for a couple of days now nothing. Every time I plug in the the charge the red light comes on and then off. Blah I guess it's time to move on.
khmerkid said:
Left it charging for a couple of days now nothing. Every time I plug in the the charge the red light comes on and then off. Blah I guess it's time to move on.
Click to expand...
Click to collapse
Just to check, but you're not able to go into fastboot, correct? (hold VOL UP when you connect it to your computer, and a blue LED goes on)

Categories

Resources