Please can anyone help, I follwed the instructions in this months PC Pro to ROOT and load CyanogenMod, well it did not work.
I was able to restore as I had backed up and everything is working again as before, except that when the phone boots up there is a YELLOW Triange with an exclamation mark in the middle.
I turned on debug mode and the booted the s2 in download mode and coonected the USB cable and the ran superoneclick.exe as before except I selected UNROOT but the program now just hangs.
Please help
Thanks
__________________
Sam Cory
Flash stock firmware to unroot. Go to Samfirmware.com, search for appropriate firmware & flash following any instructions they have for flashing firmware downloaded from their site.
I cannot fins the appropriate rom on samfirmware its eems to get rid of the rooting and get back to the original i need
GT-I9100_XEU_I9100XWKI4_I9100XEUKH2_I9100XXKI1
But I cannot seem to find it
Please help
Thanks
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
ShogunSam said:
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
Click to expand...
Click to collapse
I also received the same message and downloaded the update file. when ask to Reboot & Install i selected install the device booted in CWM and i selected update from .zip and selected the downloaded file in OTA Download Folder.
The update was successful, yet the ROM looks in BETA version.
Following are the issues i am currently facing in the updated ROM
1. Gallery ICS was Force Closed, later it was solved via uninstalling update.
2. Quick Panel, Nemesis Hub, Nemesis Owner Info & Nemesis Sound Boosters are giving FC messages.
3. OTA is giving INVALID ROM Message while updating.
I´m having the same issues.
After downloading and installing the OTA update, my device is keep stucking in the boot loop.
When I do to the recovery, I always get automatic update with the update.zip, which means I can't get into the full recovery to select another functional image.
Well I hope it's not bricked. Is there a sollution?
Thanks
I have repaired that throught ODIN MODE, like described here:
http://forum.xda-developers.com/showthread.php?t=1921421&highlight=s5300
ShogunSam said:
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
Click to expand...
Click to collapse
I have the exact problem. I just can not do anything.No connection to PC I dont know what to d.o Did you solve the problem ShougunSam?
I get the exact same error, and its annoying because I cant use my phone! If anyone can help us.. thanks
Rawhabbero said:
I get the exact same error, and its annoying because I cant use my phone! If anyone can help us.. thanks
Click to expand...
Click to collapse
For all the SGY Users who are facing issues after updating Jellyblast 3.5 to Nemesis (I faced it too) here is the guide to recover your phone:-
First to repair your phone you have to flash stock rom via odin .
Here's the guide for Flashing Stock Rom via Odin
Requirement: 1. A Samsung Galaxy y phone model gt-s5360.
2. A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer {If you have not installed USB Driver for Samsung Galaxy Y then to Install USB Driver}
3. Stock Rom file : you can download stock rom according to your choice and region from the xda thread http://forum.xda-developers.com/showthread.php?t=1465800e
4. download ODIN: 1 .85.(google it as i cannot post outside links)
Installation Instruction : [ Charge your phone battery min 80%]
1. Download the required file Odin AND Stock Rom. zip and place in a folder on your desktop .
2. Now extract both with any file extractor.-- Odin v1 .85 .zip and the stock rom zip( file which contains the stock rom i. e 2 .3 .6 )
After that extract Stock Rom file after unzipping you will get three files :
PDA _S5360 _DDLK2.tar,
MODEM_ S5360 _DDLK2.tar &
CSC_S 5360 _DDLK2 .tar
3. Now turn off your Galaxy Y {Remove the battery for 5 -10 seconds and insert it back }
4. Go to Download Mode by Pressing Volume down + Home + Power for 5- 10 sec to boot in Download Mode
5. Now you entered in Download mode select continue by pressing Volume up button .
6. Now attach/ connect your phone to computer via USB cable .
7. Now on your computer open Odin v 1 .85. exe
8.Now make sure you are getting yellow box in ID:COM ( this means that your device is now connected and detected by odin )
9.Now Select those 3 files u download before
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - "GT-s5360- MULTI-CSC" file.
10.Now clik on start .
And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully . Samsung
11.Remove your phone from pc 12.Galaxy Y will auto reboot .
Now if you want to install nemesis Rom, you have to install the nemesis Rom 2.0 (Nemesis Titanium) first and than you should update the Rom by downloading the update file via OTA and flashing the zip file through CWM.
I hope my suggestion will solve your problem.
Did you wipe data and wipe catch before installing ROM??
Did you try flashing original ROM with Odin or others??
---------- Post added at 07:53 PM ---------- Previous post was at 07:48 PM ----------
chaos titan said:
did you wipe data and wipe catch before installing rom??
did you try flashing original rom with odin or others??
Click to expand...
Click to collapse
plz reply
thanks
thepain20 said:
For all the SGY Users who are facing issues after updating Jellyblast 3.5 to Nemesis (I faced it too) here is the guide to recover your phone:-
First to repair your phone you have to flash stock rom via odin .
Here's the guide for Flashing Stock Rom via Odin
Requirement: 1. A Samsung Galaxy y phone model gt-s5360.
2. A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer {If you have not installed USB Driver for Samsung Galaxy Y then to Install USB Driver}
3. Stock Rom file : you can download stock rom according to your choice and region from the xda thread http://forum.xda-developers.com/showthread.php?t=1465800e
4. download ODIN: 1 .85.(google it as i cannot post outside links)
Installation Instruction : [ Charge your phone battery min 80%]
1. Download the required file Odin AND Stock Rom. zip and place in a folder on your desktop .
2. Now extract both with any file extractor.-- Odin v1 .85 .zip and the stock rom zip( file which contains the stock rom i. e 2 .3 .6 )
After that extract Stock Rom file after unzipping you will get three files :
PDA _S5360 _DDLK2.tar,
MODEM_ S5360 _DDLK2.tar &
CSC_S 5360 _DDLK2 .tar
3. Now turn off your Galaxy Y {Remove the battery for 5 -10 seconds and insert it back }
4. Go to Download Mode by Pressing Volume down + Home + Power for 5- 10 sec to boot in Download Mode
5. Now you entered in Download mode select continue by pressing Volume up button .
6. Now attach/ connect your phone to computer via USB cable .
7. Now on your computer open Odin v 1 .85. exe
8.Now make sure you are getting yellow box in ID:COM ( this means that your device is now connected and detected by odin )
9.Now Select those 3 files u download before
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - "GT-s5360- MULTI-CSC" file.
10.Now clik on start .
And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully . Samsung
11.Remove your phone from pc 12.Galaxy Y will auto reboot .
Now if you want to install nemesis Rom, you have to install the nemesis Rom 2.0 (Nemesis Titanium) first and than you should update the Rom by downloading the update file via OTA and flashing the zip file through CWM.
I hope my suggestion will solve your problem.
Click to expand...
Click to collapse
IT STILL DOES NOT WORK! I flashed the device, and this is what i get every time! WHAT AM I DOING WRONG?
Phone specs:
Samsung Galaxy S3 Verizon SCH-i535
It was already running KitKat 4.4.2 before I rooted
This is my first time rooting and flashing ROMs to my Samsung Galaxy s3 and I have bricked it. I'm pretty sure it can be salvaged but have yet to find anything that works.
I have written the long version for those who need it, but the short version is that I screwed up and can no longer boot into recovery mode or normal mode, I'm not even sure if Download mode is working, and my device isn't recognized by Kies or Odin on my PC so I cannot yet do a recovery from there.
As of now my phone only boots into Odin Mode and gives the following info:
ODIN MODE
PRODUCT NAME: SCH-I535
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOM SECUREBOOT: ENABLE
BOOTLOADER AP SWREV: 2
and displays the yellow triangle error and says: Firmware upgrade encountered an issue. Please use Software repair Assistant & try again.
I tried to use Samsung Kies which has an emergency firmware tool but my device will not connect and become recognized by the program.
This is pretty much where I'm stuck.
Keep reading if you need additional info.
Steps leading up to problem:
I was able to Root the device succesfully
I then downloaded the latest CM11 package (cm-11-20140217-NIGHTLY-d2vzw.zip) and Gapps
I also downloaded the TWRP recovery img (openrecovery-twrp-2.7.1.0-d2vzw.img)
Once I had these downloaded I got the app [ROOT] Rashr - Flash Tool
I opened the app and tried to do a backup but I'm pretty sure it failed, or at least it said it failed. I couldn't find out how to check, but was not worried since I have already backed up my important files to the verizon cloud.
On the app I went to recover using other file and found the TWRP recovery img I downloaded.
From here I booted into recovery manually, but it did not bring up the TEAMWIN screen for TWRP like I've seen in other video tutorials so I rebooted into normal mode went to the Rashr app again and followed the prompt to do a Recovery boot using the TWRP img.
THIS IS WHERE THE PROBLEMS BEGAN:
It began to lead into recovery mode but it gave a message that said something along the lines that I have tried installing a custom OS and to take my phone to the nearest verizon store.
I turned it off and tried to boot back normally but got the same error.
I tried to boot into Download mode and was successful! So I thought yaay!
Read a tutorial to reload a stock version of android here: http://forum.xda-developers.com/showthread.php?t=2586319
I followed all the steps but when i got to 7. which said You should see your phone under ID:COM (you should also see it has been added in message) I was not seeing my phone there. I figured it may be OK since I was able to install the drivers so that meant the USB was working so I went ahead and ran Odin to recover Jelly Bean 4.3 onto the device.
My thoughts and guesses as to what the problem is:
I think that it may be because I was already running 4.4.2 and/ or didn't have the proper bootloader when I tried to do the TWRP recovery.
Am I on the right track? Thanks for any help!
Please ask. In correct forum this is int'l s3 (i9300) forum
My question is how can i install a new OS. or how can i get my phone back to work. I tried in downloadmode but my phone is not being detectet by pc.
i speak very bad english and i dont know anything about rooting. can someone help me pleeeease? :crying:
Edit: When i start in recovery it says "recovery is not seandroid enforcing"
Phone data:
Model: SM-J120FN
FCC ID: A3LSMJ120FM
SSN: -J120FNGSMH
Made in Vietnam....
SM-J120FN said:
My question is how can i install a new OS
Click to expand...
Click to collapse
If you want to get back to stock on your Samsung Galaxy J1 2016, you will need the following:
1. Stock rom: SM-J120FN
2. Samsung USB Drivers installed on your windows pc
3. Odin (Samsung's flash tool)
Steps to follow:
1. unzip "stock rom".zip
2. start Odin
3. In the right, click AP and point to the folder where you have the rom unnzipped
4. put your phone in DOWNLOAD mode, not recovery.
5. Now connect your device to the computer
6. Odin should display some com port number if all is good.
7. Click start and wait until success message is displayed
First boot may take a little longer than usual.
Let me know if you get stuck in the process, I might be able to help you.
Also sending some information to your PM (private message inbox). Check it.
Good luck!!!
My samsung phone has got stuck onh
homescreen just after logo showing
invalid kernel length
How can i recover this phone
The phone has been brought from India
Should there be the need to flash the
phone?
If yes where can i find the firmware for
the above mentioned model.
Kindly advice.
Greetings, @su2674raj
The answer is simple!
"Flash stock ROM"
There is a way to flash the firmware again. First unlock your bootloader
Requirements: A PC of course, A working USB cable, your A10, unlocked bootloader, Odin 3 or Higher, and a mind, some patience.
I am not responsible for bricking your device.
This is how to unlock bootloader. I just chooses a random YouTube video I don't own any content I WILL SEND.
Galaxy A series bootloader unlock:
Downloading "Samsung Odin"
Then download "Samsung Odin" to your PC. I prefer latest version.
Odin download link: https://odindownload.com/
Galaxy A10 firmware
Then download the Samsung Galaxy A10
firmware.
Galaxy A10 firmware: https://samfrew.com/fr/download/Galaxy__A10__/f4ji/PAK/A105FDDU3BTF1/A105FOJM3BTF1/
You can back if this isn't your A10 version and choose another one from the site bellow.
Now shut your A10 down. (To shut it down just hold volume down and power for more than 10 seconds. Now hold both volume keys while device is off... Then connect USB cable. Allow the download mode thing. And when it say "downloading" you will see a yellow thing appears in "Odin" tool.
Now... Unzip the firmware and open Odin.
The files inside the zip will start with something like this
A file will start with "BL" at the beggining so obviously load it in the "BL" section in odin
The one starts with "AP" will be putten in the AP section. Etc.
Warning!
The "AP" might take some time to load. It might say it's not responding but just wait for it. You are loading 2GB firmware.
After loading all the files simply click start. That's all! Wait for it and it will reboot . I hope this be helpful for you.
TROUBLESHOOTING SOME ISSUES!!!
If you connected your phone in download mode to PC but you didn't see yellow colour that means you have to install "Samsung galaxy USB drivers" from online.
After flashing... (Clicking start) if it finished and the ROM said Invaild... You have to get another firmware from another site (use a YouTube video I
recommend)
if the Odin stuck on "setup connection" for more than one minute that means you have to click "reset" then close Odin and restart your mobile to download mode again and start everything again.
TIPS!!
In "Odin" if you filled all the required files in thier right section there might be a section without a file in it. Just skip it
Consider installing twrp recovery for easier ROM flashing (without a PC!)
Android 11 ARM64 LINEAGE OS 18.1 is unofficially out for our galaxy A10. It can be flashed using the twrp recovery. The twrp can be flashed uising Odin.
Thanks all i will try it and let you know the outcome of the same.