[Q] Resetting Chinese Tablet with Boot Loop - Android Q&A, Help & Troubleshooting

I've got a Chinese tablet that I bought in Uruguay, the XI-TAB700 (xion.com.uy/#/tablet-multimedia-7-PR-317) It was running a rooted Android 4.1 when I bought it, and from that website it says it's an A13 tablet.
Recently it began doing the boot loop, and I've tried a wide variety of button presses to see if it had a boot recovery mode, but I've had no luck. It has a joined volume + and - button, a power button, and an embedded reset button on the back, but no combination of holding, tapping, or switching these buttons seems to be getting me a menu, just a looping Android loading screen.
So my question is, what tools are available for me to flash it without anything but USB access, and what ROM would be safe for flashing this type of tablet?

Related

[Q] Viewpad 10s problem

Hello everyone.
Searching the forum I couldn't find a similar problem
I have installed the Rom Manager, and installed the CWM recovery Rom manager that is required. When I clicked the Backup Current ROM, that's when my problems started. Tablet reboots, turned on the screen as if it will boot and then shuts down. From that moment have I never managed to get further than the black screen.
I tried to connect tablet to the computer and enter the APX (press and hold, vol- and power button, or vol+ and power button or press and hold BACK and power button), but the computer does not recognize tablet at all. No birds, just nothing, screen just power up, and than shut down...
I even tried opening the tablet and removing the connector from the battery, but that didn't work too...
Has anyone had similar experiences and if anyone has an idea how to fix it?

[Q] mid 7 android 4.0 or UGoos UG-LMW70

I am not sure which one is the actual name the box simply says mid android bought form ebay
it has a power button and volume up and down buttons
I am trying to get into the recovery console with no luck I have tried every button combo I can think of .
the tablet boots but hangs at the android screen
does any one know how to get into the boot loader or recovery screen on this thing?
thanks

[Q] ZTE V969 - Cannot enter custom recovery mode via combination keys

I have with me this ZTE Handset which apparently is not yet listed in gsmarena.com. I think this handset was released last December of 2013 considering it was the date set when i first turned on the device.
For quick specs it uses MTK6582, MALI-400MP, 1GB RAM, 4GB ROM
Moving on with my problem.. I have already rooted the device but cannot do any drastic modifications in fear of going into bootloop. I have already installed TWRP but it seems that I cannot access it via combination keys from a device-turned-off state. The only way I can boot into the aforementioned recovery mode is when I'm inside the Android OS using Holo Rebooter/Quick Boot app etc. While I already have a twrp backup, it cannot be used when the device goes on bootloop and/or stucked at logo for whatever reason.
Here are the combination keys I tried so far:
1. Volume Up + Power Button = ATE SIGNALING MODE, EMERGENCY CALL IS NOT AVAILABLE
2. Volume Down + Power Button = META MODE
3. Volume Up + Volume Down + Power Button = FACTORY RESET MODE (In Chinese Language)
There are only three physical buttons in the device as stated above.
Do you guys have any idea or workaround for my problem?
If combination keys are out of the options, is there a way to enter TWRP while the device is turned off using the computer?
I'm really hoping someone can help me with this problem. I've spent a lot of time looking for any online resources that can be used to solve this problem but to no avail.
Thanks in advance and good day to all of you.
that's exactly my problem too :'(

[Q] Samsung Galaxy Tablet 2 - Stuck on language screen

My wife upgraded to some latest version of Android. Alas I don't know the exact details. Since then the tablet would keep rebooting making it entirely unusable. So I did a factory reset (power button + vol button and wiped all the data). Then the tablet rebooted and brings me to the first setup step which is to select a language. So I pick one but the tablet immediately reboots and brings me back to the same setup screen. I am stumped.
Any ideas?

[Android Tablet Issue] Acer Iconia A1-810 - 1st freezing, 2nd "erasing" screen

[Android Tablet Issue] Acer Iconia A1-810 - 1st freezing, 2nd "erasing" screen
Hi,
My tablet Acer Iconia A1-810 (with KitKat version, not rooted) was freezing all the time and I make a normal factory reset from settings. The problem continued to appear and I decided to make a hard factory reset using tablet buttons. After confirm "yes, wipe all data", the tablet start to show a screen with the android logo and saying "erasing...". It's been 3 days now and nothing changes. Not even when I press the reset button and turn on the device that screen appears again.
I've tried to remove (unplug) the battery and plug back in; Tried to get back to recovery mode (power button + volume up) but keeps to show that screen; Any action becomes useless... Nothing works.
Maybe a complete rom flash would do it? But... How to do it if none action on buttons does something?
Any solution?? Thank you for any response!!
genn2 said:
Hi,
My tablet Acer Iconia A1-810 (with KitKat version, not rooted) was freezing all the time and I make a normal factory reset from settings. The problem continued to appear and I decided to make a hard factory reset using tablet buttons. After confirm "yes, wipe all data", the tablet start to show a screen with the android logo and saying "erasing...". It's been 3 days now and nothing changes. Not even when I press the reset button and turn on the device that screen appears again.
I've tried to remove (unplug) the battery and plug back in; Tried to get back to recovery mode (power button + volume up) but keeps to show that screen; Any action becomes useless... Nothing works.
Maybe a complete rom flash would do it? But... How to do it if none action on buttons does something?
Any solution?? Thank you for any response!!
Click to expand...
Click to collapse
I wonder if you were able to find any solution, because i have the same problem. I can get into the recovery mode pressing power + volume up. You have to try when the table is going to reboot; not always work but it load recovery mode sometimes.

Categories

Resources