About a year or so ago I installed Prime (HTJ85B.prime_epad-1.7-20110804) and Kernel ([email protected] #92).
I haven't really used my Transformer that much, but now I'm wanting to use it more and trying to fix an issue I have with it.
Everytime I power it on, I have to do the Power + Vol Down step and then press Volume Up for it to load to Android, but if I simply press Power then it gets stuck at the splash screen and never moves. I've tried rebooting into Recovery from Rom Manager and from holding down Power when the device is on and hitting recovery, but it just reboots and gets stuck on the splash screen.
Wanting to get an updated Rom and all installed, but I cannot figure out how to get to Recovery in order to install it.
Can anyone help with this issue, please?
Hello.
I bought a Samsung Galaxy Win from Shanghai and I'd like to change it's Android version with the new one 4.4.2 kk.I saw in this forum how to install it, but I have a problem entering recovery mode. First I shut down the phone, then I push the buttons (power key + menu + volume up) and after that I only see a "Samsung" text on the screen and an yellow triangle with an exclamanation mark on the bottom. This shows twice and then the phone turns on normally. I don't see anywhere anyone having this problem and I don't know how to fix it... This phone may not be original, but I also have no idea how to check that. The question is - how to boot into this recovery mode?
I've got a Chinese tablet that I bought in Uruguay, the XI-TAB700 (xion.com.uy/#/tablet-multimedia-7-PR-317) It was running a rooted Android 4.1 when I bought it, and from that website it says it's an A13 tablet.
Recently it began doing the boot loop, and I've tried a wide variety of button presses to see if it had a boot recovery mode, but I've had no luck. It has a joined volume + and - button, a power button, and an embedded reset button on the back, but no combination of holding, tapping, or switching these buttons seems to be getting me a menu, just a looping Android loading screen.
So my question is, what tools are available for me to flash it without anything but USB access, and what ROM would be safe for flashing this type of tablet?
Hi All,
I'm completely lost on this one, I want to get help with a bricked device but do not know what the device is.
I tried to flash CM10 onto the device, but now realise I got something very wrong as touch screen does not work (totally my own fault for not reading up enough on the device prior to doing this).
Only buttons on device are volume or power, Seemingly i cannot find a combination of these that will go to bootloader, adb nor any other program i have tried will pick up the device, trying with UBUNTU 14.04 and Windows 7 both without success. Gets stuck on a screen telling me about compatibility zoom (all it needs is press ok to continue but touch screen unresponsive).
Its an unbranded 7 inch tablet with an Allwiner A10, attached should be all the photos needed for someone to work out what it is (i hope) as well as one before I broke it of its original ROM build. Has a mini usb connection on it for connecting to PC. I have tried VOL Up + Power / Vol Down + Power / Vol Up + Vol Down + Power / Vol UP whilst pluging in usb / fast tap volumes as loading / hold all three buttons for 10 seconds all without getting into boot loader.
Worst case i want to flash the original ROM back on it, best case I get new fancy ROM working once I can establish which device it is. To do either of these i need to get to bootloader (I Think).
Any help would be much appreciated.
Hello all,
I had rooted my Asus Memo Pad Smart 10 with KingoRoot.
Bought SuperSU Pro and BusyBox Pro
Been using it for many months without issue
Went to options in SuperSU Pro to install itself as a system app
Tablet rebooted, but now only shows Asus logo without spinning dots and hangs
This is what I've tried so far:
------------------------------
Rebooted to recovery with Power button + Volume Down button
Showed the following:
Android cardhu-user bootloader <1.00 e> released by "US_epad-10.6.1.31-20130823" A03
key driver not found.. Booting OS
Starting Fastboot USB download protocol
It then has the usual 3 choices: RCK, Android, Wipe Data
I chose Wipe Data with Volume Up button
Then showed:
Please wait a few minutes..
Booting Recovery kernel image
Signature match.
Are you sure to wipe your user data?
Press <VOL_DOWN> to cancel,
Press <VOL_UP> to continue.
I pressed Volume Up button
Then showed the android with spinning hexagon-type cube in stomach
After about 5 seconds, it went back to Asus logo without spinning dots
------------------------------
------------------------------
After rebooting to recovery, I chose the Android option with Volume Up button
It showed:
Cold-booting Linux
Signature match.
Then it hangs
------------------------------
------------------------------
On my laptop, I downloaded latest firmware file for my Asus Memo Pad Smart 10 (ME301T), US_epaduser_10_6_1_31_UpdateLauncher.zip
Unzipped it to reveal US_epad-user-10.6.1.31.zip
Placed US_epad-user-10.6.1.31.zip onto MicroSD card and inserted into tablet
After rebooting, I chose the RCK option with Volume Up button
Rebooted with Power button + Volume Down button
Chose RCK with Volume Up
It showed:
Booting Recovery kernel image
Signature match.
Then showed dead android with red triangle with exclamation point
------------------------------
I can't get to the tablet with ADB because it no longer recognizes the device.
Can anyone help me flash the firmware?
SOLVED!
I was able to flash my firmware by renaming the zip file from "US_epad-user-10.6.1.31.zip" to "EP201_1024_SDUPDATE.zip"
Copied this file onto blank MicroSD card (formatted FAT32)
Pressed Power button and Volume Down simultaneously to reboot into recovery
Press Volume Up to select RCK
Yes!!!
jerryferreira said:
Hello all,
I had rooted my Asus Memo Pad Smart 10 with KingoRoot.
Bought SuperSU Pro and BusyBox Pro
Been using it for many months without issue
Went to options in SuperSU Pro to install itself as a system app
Tablet rebooted, but now only shows Asus logo without spinning dots and hangs
This is what I've tried so far:
------------------------------
Rebooted to recovery with Power button + Volume Down button
Showed the following:
Android cardhu-user bootloader <1.00 e> released by "US_epad-10.6.1.31-20130823" A03
key driver not found.. Booting OS
Starting Fastboot USB download protocol
It then has the usual 3 choices: RCK, Android, Wipe Data
I chose Wipe Data with Volume Up button
Then showed:
Please wait a few minutes..
Booting Recovery kernel image
Signature match.
Are you sure to wipe your user data?
Press <VOL_DOWN> to cancel,
Press <VOL_UP> to continue.
I pressed Volume Up button
Then showed the android with spinning hexagon-type cube in stomach
After about 5 seconds, it went back to Asus logo without spinning dots
------------------------------
------------------------------
After rebooting to recovery, I chose the Android option with Volume Up button
It showed:
Cold-booting Linux
Signature match.
Then it hangs
------------------------------
------------------------------
On my laptop, I downloaded latest firmware file for my Asus Memo Pad Smart 10 (ME301T), US_epaduser_10_6_1_31_UpdateLauncher.zip
Unzipped it to reveal US_epad-user-10.6.1.31.zip
Placed US_epad-user-10.6.1.31.zip onto MicroSD card and inserted into tablet
After rebooting, I chose the RCK option with Volume Up button
Rebooted with Power button + Volume Down button
Chose RCK with Volume Up
It showed:
Booting Recovery kernel image
Signature match.
Then showed dead android with red triangle with exclamation point
------------------------------
I can't get to the tablet with ADB because it no longer recognizes the device.
Can anyone help me flash the firmware?
Click to expand...
Click to collapse
nice job
Hi folks!
Does anybody still keep in depth of HDD (tape archives, possibly? %) ) firmware less than or equal US_epad-user-10.6.1.29.zip?
Found last week ME301T with US 10.6.1.31, registered at ASUS, but have no luck with unlocking bootloader - network error...
MitMProxy+rooted+root certs from cacerts.org does this own, but no luck with unlocking bootloader...
mr.kolucci said:
Hi folks!
Does anybody still keep in depth of HDD (tape archives, possibly? %) ) firmware less than or equal US_epad-user-10.6.1.29.zip?
Found last week ME301T with US 10.6.1.31, registered at ASUS, but have no luck with unlocking bootloader - network error...
MitMProxy+rooted+root certs from cacerts.org does this own, but no luck with unlocking bootloader...
Click to expand...
Click to collapse
Hi I am on the same boat. Let me know if you have an idea.
With Android 4.2. and bloatware this Tab is unusable