Dear Devlopers i just bought sprint lg g3 i just started the phone it stuck at Configuring Your Phone i am waiting till 30 minutes but same message show help me
i am from india want to use gsm sim on it but waiting for start the phone to unlock it
Same problem
:crying:
any fix this?
i have a solution for this problem....
Factory Reset, start configuring language, dont connect any WIFI or DATA and Next button after this the screen show Configuring Phone, press volume up + volume down - home button and button back, and Woola bypass the stupid activation :laugh::laugh::laugh:
Same as G2!
Need help
Hi ,
I'm also stuck there.Pleas help me to fix that.
Thanks,
Thanks! Just resetting it and disabling wifi worked. Then you can switch the wifi back on after that screen goes away.
Lussardi said:
:crying:
any fix this?
i have a solution for this problem....
Factory Reset, start configuring language, dont connect any WIFI or DATA and Next button after this the screen show Configuring Phone, press volume up + volume down - home button and button back, and Woola bypass the stupid activation :laugh::laugh::laugh:
Click to expand...
Click to collapse
Now you are my new god
TY
Just like pull out the sim that way it has to network
oscar2061 said:
Now you are my new god
TY
Click to expand...
Click to collapse
hahahaha good! :good::angel:
Lussardi said:
:crying:
any fix this?
i have a solution for this problem....
Factory Reset, start configuring language, dont connect any WIFI or DATA and Next button after this the screen show Configuring Phone, press volume up + volume down - home button and button back, and Woola bypass the stupid activation :laugh::laugh::laugh:
Click to expand...
Click to collapse
Thanks maitro Work Well you are ma hero, :good:
didn't work for me LG tribute ls660 :crying:
Thank you it worked
Thanks, It worked for the LG G Stylo.
I have lg g stlyo it stuck at the configuration your phone
Lussardi said:
:crying:
any fix this?
i have a solution for this problem....
Factory Reset, start configuring language, dont connect any WIFI or DATA and Next button after this the screen show Configuring Phone, press volume up + volume down - home button and button back, and Woola bypass the stupid activation :laugh::laugh::laugh:
Click to expand...
Click to collapse
That buttons combination didnt work for me, it is stuck there at Configuring your phone.... Can anyone please help me? Its a G3 LSS990.
Saved Me.
Lussardi said:
:crying:
any fix this?
i have a solution for this problem....
Factory Reset, start configuring language, dont connect any WIFI or DATA and Next button after this the screen show Configuring Phone, press volume up + volume down - home button and button back, and Woola bypass the stupid activation :laugh::laugh::laugh:
Click to expand...
Click to collapse
Thanks bro, this one saved me.
Much obliged!
Thank You Thank You Thank You
You are my God!
:good: :angel: :good:
Lussardi said:
: Phone, press volume up + volume down - home button and button back, and Woola bypass the stupid activation :laugh::laugh::laugh:
Click to expand...
Click to collapse
Flashed RR rom my lg g3 and stuck and mobile service activation screen . No home button ti click after selecting language .. any advice??
Sent from my htc_m8 using XDA Forums
sonnu0100 said:
Flashed RR rom my lg g3 and stuck and mobile service activation screen . No home button ti click after selecting language .. any advice??
Sent from my htc_m8 using XDA Forums
Click to expand...
Click to collapse
rotate de phone and press back button and you bypass activation
thanks man you saved my time. I love you guys!!!
Lussardi said:
rotate de phone and press back button and you bypass activation
Click to expand...
Click to collapse
There is no back menu in activation .. when tried to enter password in wifi the asop keyboard also fc .. still stuck at it from last 2 days .
Sent from my htc_m8 using XDA Forums
I have lg g flex 2 sprint and it's stuck on configuring your phone. I just did use hidden menu to lab network and then I reset.
Related
Does anybody know how to get around the activation screen? With motoblur you type ##bluroff, with sense UI you just try to activate but hang up three times, with stock android just press the four corners in a clockwise manner starting in the yore left but how do you do it in touchwiz?
Sent from my ADR6300 using XDA App
Press the home key 3 or 4 times to bypass activation screen. I just figured it out
Sent from my ADR6300 using Tapatalk
tech9ne said:
Press the home key 3 or 4 times to bypass activation screen. I just figured it out
Sent from my ADR6300 using Tapatalk
Click to expand...
Click to collapse
According to my friend, doesn't work.
vix- said:
According to my friend, doesn't work.
Click to expand...
Click to collapse
your friend is full of fail, ive done it multiple times on multiple devices.
tech9ne said:
your friend is full of fail, ive done it multiple times on multiple devices.
Click to expand...
Click to collapse
Pressing home has never worked on a phone that has never been activated, when you clear out a phone or do the correct combination to get passed the activation screen then pressing home works
Sent from my ADR6300 using XDA App
Just picked up the phone. I tried the online activation and it didn't work. I had to call 1-877-807-4646 from some printed instructions from the Verizon store. After all that, when you turn on the phone and press the button to activate, it calls *228 and that's it.
Hit the emergency button and press* #83786633 and it will say "soft key enabled" and then disspear then then the home key.
In the attached picture, the last 3 was left out because once you enter it in, it disappear and displays soft key enabled and back to regular emergency screen.
Sent from my DROIDX using XDA App
I hate to bump an old thread but, this helped me today and, in case someone else needed the info, I wanted to confirm that this worked perfectly for the Continuum as well. I would thank you but no thank button.
dr154 said:
Hit the emergency button and press* #83786633 and it will say "soft key enabled" and then disspear then then the home key.
In the attached picture, the last 3 was left out because once you enter it in, it disappear and displays soft key enabled and back to regular emergency screen.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
c_live_lee said:
I hate to bump an old thread but, this helped me today and, in case someone else needed the info, I wanted to confirm that this worked perfectly for the Continuum as well. I would thank you but no thank button.
Click to expand...
Click to collapse
Can you help me please? I can't seem to get it to work. I followed the instructions to the letter, but after I hit 'home', nothing happens...
If that doesn't work, you can also try to restart the phone in airplane mode. From the activation screen -> Hold Power button -> Airplane Mode ON -> Hold Power button -> Power off.
Once you boot back up the activation screen won't even pop up so you won't have to dial any silly codes n ish... hollaaa
akaine2001 said:
If that doesn't work, you can also try to restart the phone in airplane mode. From the activation screen -> Hold Power button -> Airplane Mode ON -> Hold Power button -> Power off.
Once you boot back up the activation screen won't even pop up so you won't have to dial any silly codes n ish... hollaaa
Click to expand...
Click to collapse
Thanks for helping me get past the activation screen! =]
Although, now that I've rebooted, I have a blank screen (besides that bar on the top which tells you the time and wifi signal strength). I can pull down and click the screen with the wifi, gps, bluetooth, etc., but that's about it. What should I do to get the home screen and such to show up?
akaine2001 said:
If that doesn't work, you can also try to restart the phone in airplane mode. From the activation screen -> Hold Power button -> Airplane Mode ON -> Hold Power button -> Power off.
Once you boot back up the activation screen won't even pop up so you won't have to dial any silly codes n ish... hollaaa
Click to expand...
Click to collapse
Man, thanks!
I purchased this phone about a few months ago from a guy at a flea market.
It has been basically a paper weight since Verizon say's it was stollen.
Now at least I can use it for music, wiFi.
Any ideas on how long phones stay on the blacklist?
Meaning do they want the money bad enough to let the hardware back on board?
jesgrew said:
... since Verizon say's it was stollen.
Now at least I can use it for music, wiFi.
Any ideas on how long phones stay on the blacklist?
Meaning do they want the money bad enough to let the hardware back on board?
Click to expand...
Click to collapse
Since Verizon informed you that the device was reported stolen (circumstances of purchase seem to support likelihood), you now have reason to believe that you've received and now possess stolen property. It may be wise to check your state's laws before doing anything else. I doubt that Verizon's going to send a goon squad to your door, but the critical point is that under the circumstances, you need to make an especially well-informed decision about using that phone. I am not a lawyer, but I know enough to say you've entered a grey area and should proceed with care.
Sent from my SCH-I500 using XDA Premium App
been having a problem with the 2.2 roms. I install them and the screen will go to sleep during a call, and the only way to wake it up is to either hang up the call or plug in the charging cord. The phone will wake normal when i flash back to a 2.1 rom. Does anyone have any ideas how to fix on froyo roms.
Enable trackball to wakeup under cyanogen settings or something like that.
press send + vol up (or vol down, believe it's vol up) to wake up phone. mods please move to q&a thread. thanks and hope this helps.
mjb413 said:
press send + vol up (or vol down, believe it's vol up) to wake up phone. mods please move to q&a thread. thanks and hope this helps.
Click to expand...
Click to collapse
You almost had it.
Press and hold vol+, then while holding that, press and release the send button. That will wake the screen without disturbing the call.
push this to system/usr/keylayout
http://www.multiupload.com/AFKG4K2IBB
sorry 5thagent. remembered seeing the instructions somewhere around. thanks for the correction! :-( i tried. I had forgotten about the other fix.
was just about to post on this today. thx for the infoz
Also... all you should have to do is pull the phone away from your face and it should turn back on almost immediately. I've never ever had this problem lol
Hungry Man said:
Also... all you should have to do is pull the phone away from your face and it should turn back on almost immediately. I've never ever had this problem lol
Click to expand...
Click to collapse
I agree that should normally work,but at least for me when using speaker phone I can't just move the phone to wake it. using trackball wake/unlock works fine though
Sent from my FroShedYo.V6 using XDA App
tazzpatriot said:
push this to system/usr/keylayout
http://www.multiupload.com/AFKG4K2IBB
Click to expand...
Click to collapse
What is that and what does it do?
How hard is it to program the ROM so that the screen turns back on when you touch it?
Hungry Man said:
Also... all you should have to do is pull the phone away from your face and it should turn back on almost immediately. I've never ever had this problem lol
Click to expand...
Click to collapse
this is how i test my roms callin 226 and it alwayz works
Hungry Man said:
Also... all you should have to do is pull the phone away from your face and it should turn back on almost immediately. I've never ever had this problem lol
Click to expand...
Click to collapse
That works but if you have your phone on the table in front of you w/speakerphone enabled while some robot is giving you 5 minutes of number equations, the phone will timeout. When the trackball wake option is selected in CyanogenMod settings/input settings, it will wake the device after you've manually turned the phone off but it doesn't wake the screen after it's timed out. I have been trying to use tasker as a way around this problem but I haven't been able to successfully write a working profile
Blma617 said:
That works but if you have your phone on the table in front of you w/speakerphone enabled while some robot is giving you 5 minutes of number equations, the phone will timeout. When the trackball wake option is selected in CyanogenMod settings/input settings, it will wake the device after you've manually turned the phone off but it doesn't wake the screen after it's timed out. I have been trying to use tasker as a way around this problem but I haven't been able to successfully write a working profile
Click to expand...
Click to collapse
just use the vol up + send?
playpolo4life said:
just use the vol up + send?
Click to expand...
Click to collapse
I was never aware of this method.. Thanks dude
Sent from my FroShedYo V10-ERIS using XDA App
playpolo4life said:
just use the vol up + send?
Click to expand...
Click to collapse
I'm bumping this thread because I have the same problem but my volume rocker is broken/missing so it is very difficult for me to press vol up/down. I need to use a pen tip or needle, which I usually do not have readily available.
Is there any other option out there for me? Why can't I use the trackball or just the Send key????????????
If anyone can help, I would greatly appreciate it.
FYI, I'm running GSB 1.4 (CM-7 Gingerbread based ROM).
edit: Some users on the CM forums said that pressing the Menu or Home keys worked, but that doesn't work for me. They were on CM6, so maybe that doesn't work in CM7, I don't know.
CrayzeeCarl said:
I'm bumping this thread because I have the same problem but my volume rocker is broken/missing so it is very difficult for me to press vol up/down. I need to use a pen tip or needle, which I usually do not have readily available.
Is there any other option out there for me? Why can't I use the trackball or just the Send key????????????
If anyone can help, I would greatly appreciate it.
FYI, I'm running GSB 1.4 (CM-7 Gingerbread based ROM).
edit: Some users on the CM forums said that pressing the Menu or Home keys worked, but that doesn't work for me. They were on CM6, so maybe that doesn't work in CM7, I don't know.
Click to expand...
Click to collapse
I seem to recall that in CM settings, you can configure what buttons can wake the phone up. You should be able to set it to the trackball.
My phone was working just fine and randomly the lock button stopped working and the home button brings up the power screen! This is extremely frustrating, any help would be great!!
Megalinn said:
My phone was working just fine and randomly the lock button stopped working and the home button brings up the power screen! This is extremely frustrating, any help would be great!!
Click to expand...
Click to collapse
I cant explain why its happening if u didnt changed anythink in the system but i recognized myselfe that sometimes phones get rally messed up without any explanation...
i would suggest to backup all data u need (for instance sms call log....) and just make a simple hard reset
if thos does not work search in the forum how to flash a stock rom on ure phone
this will make ur phone become the status it had when u just unboxed it
Hello,
I have HTC Legend and my screen got broken. Now the phone boots but I cannot see anything on the screen.
I want to remove all my personal data and sell the phone for parts.
Can someone help me on this issue?
Thanks,
Asen
amishev said:
Hello,
I have HTC Legend and my screen got broken. Now the phone boots but I cannot see anything on the screen.
I want to remove all my personal data and sell the phone for parts.
Can someone help me on this issue?
Thanks,
Asen
Click to expand...
Click to collapse
See http://forum.xda-developers.com/showthread.php?t=1571950. Try to search forum first or try Google, this thread was the first hit.
turn off ur phone
press and hold the volume down button nd while holding it press the power button..it will take u to a boot menu. select the 3rd option "clear storage"(use the volume buttons to navigate) and ur done after selecting it with the power button
Hello everyone.
My power button suddenly stopped working. I'm running a Honor 7 (PLK-L01) with android 6.0 with emui 4.0.1. I'm not rooted. It has always worked before, but now it doesn't function if I press it. Short presses to wake the device, long presses to get the boot menu, it al doesn't work. I'm afraid that if my battery dies, I won't be able to turn my device on at all. Are there more people with this problem, or are there people who have a solution? I hope it's just a software problem, but I don't know how I can be sure if it is a software or a hardware problem.
I hope someone can help me.
Okay, it started working again. As soon as I pressed my volume buttons it responded again, like it was triggered by it or something.
Volume buttons and power button are very close together so maybe some kind of dirt got inside and stuck them.
yes, most probably some malfunction due to obstucles or small particles like dust,
its best once you get it cleaned
Service center is your friend to get it cleaned.
Yeah, could do that. But the closest service center is like 100 km from where I live ?
maartenlaban said:
Yeah, could do that. But the closest service center is like 100 km from where I live ?
Click to expand...
Click to collapse
Bad luck. Haha.
u can use application can help u out ( gravity screen paid app ) fully working and u'll forget the power button !
Romiui said:
u can use application can help u out ( gravity screen paid app ) fully working and u'll forget the power button !
Click to expand...
Click to collapse
But the power button is still very necessary.
gopinaidu77 said:
But the power button is still very necessary.
Click to expand...
Click to collapse
it is , but i was having this issue with my daughter HTC , i was powering up without button lool and used the app and no need to go service and spend $$$ ..
but if that phone for daily use so yes go fix it .
Romiui said:
it is , but i was having this issue with my daughter HTC , i was powering up without button lool and used the app and no need to go service and spend $$$ ..
but if that phone for daily use so yes go fix it .
Click to expand...
Click to collapse
To avoid wear and tear in my power button, I use double tap to lock.