Related
Hi, I have successfully rooted 5.0.2 rom on galaxy grand prime with cm autoroot for kit kat.
1. flash new 5.0.2 update with odin (if you had root on kit kat flash 2 times, it wont work first time) http://www.sammobile.com/firmwares/download/54047/G530FZXXU1BOG2_G530FZOXA1BOG2_PHE/
2. boot 5.0.2 set up google account and install super su
3. download flash cm autoroot https://download.chainfire.eu/664/CF-Root1/CF-Auto-Root-fortunalte-fortunaltedx-smg530f.zip?retrieve_file=1
4. boot again - phone will reboot 3 times before booting into system and updating super su, launch and set up super su
5. download recovery.zip, extract and flash it, WARNING use this recovery only with G530FZXXU1BOG2_G530FZOXA1BOG2_PHE, it is extracted from this rom and it should fix boot loop after flashing the cm autoroot package
6. reboot and you have rooted lollipop on G530FZ
MAKE SHURE YOU FLASH recovery from step no 5 otherwise you will end up in boot loop
p.s. I am now working on xposed installer
It worked. Thank you very much
Thank you it works !
Done, but i do not had to flash the recovery, the device has not entered bootloop
Same question as always: and knox? Is trigered right?
Edit: nevermind. I already have my answer.
zapetino said:
Done, but i do not had to flash the recovery, the device has not entered bootloop
Click to expand...
Click to collapse
can you enter recovery?
After this wonderfull root, do you know if an working xposed exist ?
PS: After flashing i think knox is triggerded (i trigered my knox when i flashed root in 4.4.4). Only Kingroot didn't triggered root.
hangy18 said:
can you enter recovery?
Click to expand...
Click to collapse
You were right, after another reboot the device was stuck in bootloop and i had to flash your recovery
zapetino said:
You were right, after another reboot the device was stuck in bootloop and i had to flash your recovery
Click to expand...
Click to collapse
how i flash this autoroot? via recovery or how?
Crimmy20 said:
how i flash this autoroot? via recovery or how?
Click to expand...
Click to collapse
Via ODIN
dcduartee said:
Via ODIN
Click to expand...
Click to collapse
and where i put this autoroot and recovery on odin? like witch section
Crimmy20 said:
and where i put this autoroot and recovery on odin? like witch section
Click to expand...
Click to collapse
PDA on older versions of odin or AP if you are using a newer version of odin
work on G530H?
It worked, and when you reboot the phone stopped working. When you try to run stands in the picture and nothing happens. Install recovery again by Odin, but nothing helps. Any ideas? (Sorry for the language, I have a translator)
hey guys does this method work on g530h ???
if not, can any1 link me to a guide to root my g530h i've been searching for 2 days plz hlp
Hey, it seems like I've got a problem, when I try to update SuperSU it fails :/
Did I do something wrong ?
hey can u plz tell me how did u extract the stock recovery from the rom i need it plz
Sent from my SM-G530H using Tapatalk
Yeh..how would one extract the stock recovery from the (.md5) file..is that possible.? or does one download the stock recovery (.img) file somewhere.?
sent by my: SM-G531M Grand Prime
(Lollipop 5.1.1)
I have this:
Model SM-G530FZ
Model name GALAXY Grand Prime
Country Spain
Version Android 5.0.2
Changelist 816937
Build date Thu, 17 Sep 2015 05:21:41 +0000
Product code PHE
PDA G530FZXXU1BOI2
CSC G530FZOXA1BOI2
Do I have to Flash the previous G530FZOXA1BOG2? Or can I skip this step and flash the autoroot directly? Would work the Recovery with my current version?
Just downloaded and installed Kingroot app...works fine
Hello everyone I have flashed (SM-G750A Galaxy Mega 2 AT&T) with lover firmware (G750AUCU1ANI1) and phone got flashing failed now phone shows ( firmware upgrade encountered an issue. Please select recovery mode in Kies & try again . I also tried with Kies but, kies also downloads the same firmware I have tried to flash
Before flashing phone has this firmware (G750AUCU2AOEA 4.4.4)
Now kindly I need one of the following firmware or any other way to fix this phone
G750AUCU2AOEA 4.4.4
G750AUCU3AOFA 4.4.4
G750AUCU3BOH4 5.1.1
I spend much time on searching these firmware but failed
kindly Help me
Regards !!!
Boot into download mode, use the OEM usb cable and flash the proper firmware using odin.
designgears said:
Boot into download mode, use the OEM usb cable and flash the proper firmware using odin.
Click to expand...
Click to collapse
sir the phone was ok fully working i just tried to flash using Odin
i have just found this firmware (G750AUCU1ANI1) and while starting flash ..got failed
I have tried ur method boot into download mode and find proper firmware and flash using method but, the problem is that I couldn't find any firmware rather than (G750AUCU1ANI1)
Brother i guess i have what u need pcsolutionswh gmail
Any1's able to share an ADB dump or the whole 5.1.1 firmware? :highfive:
Conejo503 said:
Brother i guess i have what u need pcsolutionswh gmail
Click to expand...
Click to collapse
like what and how?
Please system dump!!!
Any1 can post the full 5.1.1 system dump??
Kernel 5.1.1
Would some1 be nice and upload the boot.img only
Thx in advance :highfive:
Only boot.img 5.1.1 G750A
Anyone can put it the boot.img of 5.1.1 G750-A that it contains the kernel to can be ported to N7100/I9300 :highfive::highfive:
---------- Post added at 11:21 PM ---------- Previous post was at 10:53 PM ----------
Here is a topic that people have this phone and they can send boot.img 5.1.1
http://forum.gsmhosting.com/vbb/f684/problem-connecting-sm-g750a-mega-2-a-2017889/
For example the user headszone1 have G750-A updated to 5.1.1 he can give the boot.img
The Galaxy Note 3 Neo SM-N7505 has received 5.1.1 TW
Galaxy Note 3 Neo SM-N7505 has received Lollipop 5.1.1 Touchwiz N7505POUDOK2 2 days ago. The boot.img (KERNEL) from this firmware can be ported to S3/N2?? This device has an Exynos 5260 Hexa-Core with a Mali T-624 graphics card. I want know if this kernel can be ported.
Thank you for your advice.
Have a nice day.
Anyone know if Exynos 5260 5.1.1 can be ported to Exynos 4412 ??
Here is the firmware but it is payment G750A 5.1.1
http://www.dlgsm.com/index.php?dir=...Files)/Model_G/G750A_(SM-G750A)/G750AUCU3BOH4
I have the solution for Samsung G750A, write in private.
thedjedgar said:
I have the solution for Samsung G750A, write in private.
Click to expand...
Click to collapse
PM sent :highfive:
PM sent.
Have a nice day.
thedjedgar said:
I have the solution for Samsung G750A, write in private.
Click to expand...
Click to collapse
Androidwizzard said:
PM sent :highfive:
Click to expand...
Click to collapse
pepelino123 said:
PM sent.
Have a nice day.
Click to expand...
Click to collapse
So far seemingly just a joke on serious interests
I just bricked my 5.1.1 G750A by using Kingroot, then a script failed when attempting to uninstall Kingroot to replace it with SuperSU. Root appeared to stick after the script failed, and I was even prompted by SuperSU to allow root to Titanium. I tried to reboot to see if root would stay, and am now stuck in a boot loop. I get the ATT logo for a few seconds, then reboot again. I've tried Kies to reinstall and it wants to install 4.4.4 in Firmware Upgrade mode, which fails. I can't get Emergency firmware recovery in Kies to ever show my device while it is in download mode or recovery mode. I then found the only stock firmware to download which is UCU1ANI1 and that fails Odin with "Invalid Magic String." I'm guessing this is all because I can't find a 5.1.1 (or even close) firmware. So, I too am looking for this elusive 5.1.1 firmware, and using an old gimp S4 until I can get this Mega 2 back up and running.
Galaxy Mega 2 lollipop Firmware download link [ G750AUCU3BOH4 ]
Androidwizzard said:
Any1's able to share an ADB dump or the whole 5.1.1 fi
http://clangsm.com/ftpdemo/index.ph...Android/SM-G750A Samsung Galaxy Mega 2 (AT&T)
http://www.dlgsm.com/index.php?dir=/FLASH-FILES/Samsung-Flashfiles/Samsung_Official_firmwares_
http://www.romup.com/roms/11852
---------- Post added at 05:38 AM ---------- Previous post was at 05:36 AM ----------
Nucklez said:
I just bricked my 5.1.1 G750A by using Kingroot, then a script failed when attempting to uninstall Kingroot to replace it with SuperSU. Root appeared to stick after the script failed, and I was even prompted by SuperSU to allow root to Titanium. I tried to reboot to see if root would stay, and am now stuck in a boot loop. I get the ATT logo for a few seconds, then reboot again. I've tried Kies to reinstall and it wants to install 4.4.4 in Firmware Upgrade mode, which fails. I can't get Emergency firmware recovery in Kies to ever show my device while it is in download mode or recovery mode. I then found the only stock firmware to download which is UCU1ANI1 and that fails Odin with "Invalid Magic String." I'm guessing this is all because I can't find a 5.1.1 (or even close) firmware. So, I too am looking for this elusive 5.1.1 firmware, and using an old gimp S4 until I can get this Mega 2 back up and running.
Click to expand...
Click to collapse
Hello Bro, I needed your help.
Click to expand...
Click to collapse
Nucklez said:
I just bricked my 5.1.1 G750A by using Kingroot, then a script failed when attempting to uninstall Kingroot to replace it with SuperSU. Root appeared to stick after the script failed, and I was even prompted by SuperSU to allow root to Titanium. I tried to reboot to see if root would stay, and am now stuck in a boot loop. I get the ATT logo for a few seconds, then reboot again. I've tried Kies to reinstall and it wants to install 4.4.4 in Firmware Upgrade mode, which fails. I can't get Emergency firmware recovery in Kies to ever show my device while it is in download mode or recovery mode. I then found the only stock firmware to download which is UCU1ANI1 and that fails Odin with "Invalid Magic String." I'm guessing this is all because I can't find a 5.1.1 (or even close) firmware. So, I too am looking for this elusive 5.1.1 firmware, and using an old gimp S4 until I can get this Mega 2 back up and running.
Click to expand...
Click to collapse
Have you tried using Samsung Smart Switch to repair your firmware? You have to input your serial number in order to be able to download it. Try it and see if it works.
I just tried Smart Switch. It did as you suggested and said it was an incompatible device. So I put in my model/serial number. It still tries to install 4.4.4. It fails after it attempts to install with the following error on the phone in download mode:
"SW REV. CHECK FAIL DEVICE: 3. BINARY: 1" Why does Kies and Smart Switch try to install 4.4.4 instead of 5.1.1?
Next question, of those sites above. Would you guys recommend them at all? Are the files legit? Looks like the cheapest one would be $25 US to get 5.1.1.
i found this:
http://www.androidinfotech.com/2016/11/root-samsung-galaxy-c7-c7000-marshmallow-install-twrp.html
but when i tried to install twrp odin said custom binary blocked by FRP lock. after getting out of it by oem unlocking in setting and trying again odin said custom binary blocked by crom. plz help seniors...
twrp file
here is the twrp file used to install by odin
Anyone tried?? Plz update...
also was able to remove CROM lock by downloading CROM services app from samsung app store. installed twrp but it doesnot work. there is stock recovery even after installing this twrp....
Do you need google store? If yes, you can install the HK stock rom using Odin.
eisui said:
Do you need google store? If yes, you can install the HK stock rom using Odin.
Click to expand...
Click to collapse
i already have HK version. but i need to root my device.
supertausif2003 said:
i found this:
http://www.androidinfotech.com/2016/11/root-samsung-galaxy-c7-c7000-marshmallow-install-twrp.html
but when i tried to install twrp odin said custom binary blocked by FRP lock. after getting out of it by oem unlocking in setting and trying again odin said custom binary blocked by crom. plz help seniors...
Click to expand...
Click to collapse
Hi, they have 2 files of twrp in the post and he say "If You can't Flash the Above TWRP try the Below one"
2 questions...
So has you try the second twrp ? And
Do you use your odin package or that on the post ?
I used my own odin package as it shows pass after flashing twrp. I tried both files but nothing changed. Stock recovery boots after flashing either file.
Craps, it's really not good
flash twrp recovery
it will succeed
but tickout restart after flashing option in odin
*when flashing complete, remove battery if you can or switch off phone
and enter recovery mode , don't boot to normal
eisui said:
Do you need google store? If yes, you can install the HK stock rom using Odin.
Click to expand...
Click to collapse
My device is running: C7000ZCU2APL5
I tried to install HK firmware: C7000ZHU2APK5 to unlock the play store but got error user.img.ext4 - size is too big 52600792 < 113672120 when flashing in odin
How and which HK firmware can i flash in order to get the play store?
Did you find a solution for this?
bazg777 said:
My device is running: C7000ZCU2APL5
I tried to install HK firmware: C7000ZHU2APK5 to unlock the play store but got error user.img.ext4 - size is too big 52600792 < 113672120 when flashing in odin
How and which HK firmware can i flash in order to get the play store?
Click to expand...
Click to collapse
Did you ever find a solution? I'm stuck with the same. PIT file for China and Honk Kong is the same so I don't why the partitioning is not working right
Remove battery of your device before flashing using odin , Donot check reboot after flashing.
Flash recovery using odin , remove usb from device , put battery back and then try running recovery , worked for me.
akash14darshan said:
Remove battery of your device before flashing using odin , Donot check reboot after flashing.
Flash recovery using odin , remove usb from device , put battery back and then try running recovery , worked for me.
Click to expand...
Click to collapse
When I do this and I try and load recovery after it just goes to download mode instead. what firmware have you got on the device?
bazg777 said:
When I do this and I try and load recovery after it just goes to download mode instead. what firmware have you got on the device?
Click to expand...
Click to collapse
You can and you should flash in download mode , I dont think you'll be able to flash anything using odin without going into download mode
akash14darshan said:
You can and you should flash in download mode , I dont think you'll be able to flash anything using odin without going into download mode
Click to expand...
Click to collapse
I did flash in download mode. After flashing remove cable, power off without restart. Power on holding recovery keys - the device says "booting recovery..." in red text at the top but it boots to download mode instead.
Which rom were you using when you flashed TWRP?
Here is the solution
https://forum.xda-developers.com/android/help/install-hk-version-chine-sm-c7000-32gb-t3550591
FOR SAMSUNG GALAXY ALPHA G850F
For anyone who doesn't want to download the whole stock firmware or is using a custom ROM and hasn't update baseband/modem in a while or want to go back to stock recovery here are the latest Modem & (Stock) Recovery files taken from G850FXXU2CPG1_G850FOXE2CPG1_G850FXXU1CPC1 firmware
Download Modem : https://goo.gl/5Yr1Dr
Download Recovery: https://goo.gl/y1O3WM
To flash modem:
1. Download Odin here https://goo.gl/wL8LFs
2. Open Odin and click on CP and find the modem.bin file (wait until it says Added then countinue to 3)
3. Put your phone in Download Mode
4. Connect it via a USB cable with your pc
5. Click Start
6. Wait until your phone is booted.
Done !
To flash recovery (the way I do it )(You must have root):
1. Get the Flashify APP here : https://goo.gl/aQqYGa
2. Open Flashify and select "Recovery Image" under Flash
3. Find your recovery.img file, click ok and flash it
4. Wait for it to finish
Done !
Thanks.
Please Help me!
Why isn't working on my phone? I follow all the instructions, Odin install all perfectly but keep doing boot loops
I've flashed modem but LineageOS still isn't detecting my sim card.
Amazing, thank you! Downloading >1GB from cheapy download sites like rapidgator capped at ~30KB/s with flaky wifi is impossible for me.
ty
DurimKlaiqi said:
FOR SAMSUNG GALAXY ALPHA G850F
here are the latest Modem & (Stock) Recovery files taken from G850FXXU2CPG1_G850FOXE2CPG1_G850FXXU1CPC1 firmware
Click to expand...
Click to collapse
I suppose the baseband (CP) version you have attached is G850FXXU1CPC1
I have version G850FXXU1COJ5 and can't update - Odin can't flash, no details for the error, just failed 1. The full name of the ROM I had flashed is
G850FXXS2CQA2_G850FOLB2COJ1_G850FXXU1COJ5_HOME.tar.md5
and previously I had used
G850FXXU2COK6_G850FOLB2COJ1_G850FXXU1COJ5_HOME.tar.md5
which seem to have same baseband.
Why can't I update the baseband?
Thank you
Hi,
I am trying to flash newer baseband from what I have: G850FXXU1COJ5
I tried but failed with flashing through odin of the following two:
G850FXXU2COK6.bin
G850FXXU1CPC1.bin
Perhaps I am making a mistake in flashing it, but I am not aware which is newer or what is the difference between these two U2 COK6 and U1 CPC1
U2 > U1, but COK6 < CPC1, so which one is newer?
Thanks
Hello! I have a Network problem with my Galaxy S6 SM-G920T, I need a Modem for my Galaxy. The Baseband Version is: G920TUVS6FRC1. Help me please!
Markpetit92 said:
Hello! I have a Network problem with my Galaxy S6 SM-G920T, I need a Modem for my Galaxy. The Baseband Version is: G920TUVS6FRC1. Help me please!
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920T/
Samsung Galaxy S4 (Snapdragon)
PLEASE READ READ READENTIRE OP
"ALL MAJOR WORK DONE BY HASHCODE SO GO GIVE HIM SOM THANKS.DO NOT POST ANY BUG OR ISSUE COUSED BY THIS RECOVERY IN ORIGINAL THREAD BY HASHCODE, POST HERE AND I WILL HELP YOU."
CURRENT PROJECT STATUS:
BETA v4.10-B01 [PL1/Lollipop:5.0]
WHAT IS SAFESTRAP?
Safestrap is a Bootstrap / Recovery for locked bootloader phones. The goal is to avoid touching your primary system (I'll call this "stock" system) and only flash or make large changes to another place on your phone that Safestrap treats as a "2nd system" (in this case, it's a series of virtual ROM slots located on the internal emmc area: "/sdcard"). Once installed, you will see a "Splashscreen" giving you the option to hit "menu" to enter recovery. The recovery portion of Safestrap is now based on TWRP 3.3.0 (a touch based recovery) and you can perform .zip installs, backups and restores here. The additional features I've added to TWRP are mostly located under the "Boot Options" menu:
Here you can create virtual ROM-slots for flashing ROMs. NOTE: The bigger you make the /data partition the less room you will have to make other ROM-slots.
You can activate a new ROM-slot by choosing the slot you wish to make active and then selecting the "Activate" button. Once active, you will see the "rom-slot#" up in the top of the screen shown in green. If you make the "stock" ROM active, then you can see it in the top shown in red.
Once a ROM-slot is active, all actions you would normally perform using TWRP are directed to that ROM-slot. For example, "Install" to flash a .zip, backup and restore.
HOW DO I INSTALL SAFESTRAP?
Requirement: Root
[Safestrap pre V4.07] Requirement: busybox. Grab "Busybox" from the Play Store and run the installer.
APK install:
Once installed, open up the Safestrap application, Agree to the disclaimer that you won't try to sue me and hunt me down with a rifle if you manage to break your phone..
Then use the "Install Recovery" button. You should see the current version down in the lower left corner of the window. And the "Status:" should say "Installed" when you're done.
From there you can reboot and you *should* see a new splash screen during the boot up. While this is showing you can enter Safestrap Recovery using the [ menu ] button.
Flashable zip:
Flash using Safestrap recovery or FlashFire.
HOW DO I ENTER RECOVERY?
Note: ENG_OF1 is 4.2.2 and not like OF1 5.0
Reboot to Download mode then flash BL_ENG_OF1_BOOT_ABOOT_I545V.tar
During each reboot a splashscreen will be displayed showing whether the device is running a rom-slot or on the "Stock ROM".
Press the button shown on the screen to either enter "RECOVERY" or "CONTINUE" booting (or the hard button underneath each option).
HOW DO I EXIT RECOVERY?
Reboot to Download mode from Safestrap recvoery then flash BL_PL1_BOOT_ABOOT_I545V.tar
HOW DO I UPGRADE SAFESTRAP?
APK:
Push the APK up to your sdcard.
Boot back into the "stock" rom-slot.
Open your old Safestrap app and use the "Uninstall Recovery" button
Browse to where you pushed the APK
Click on it and install like normal
Once installed, open the APK, Grant SU access, Use the "Install Recovery" button.
Flashable zip:
Flash using Safestrap recovery or FlashFire.
KNOWN ISSUES:
- Sometimes the installation doesn't work correctly. If you don't see the splashscreen after a rebooting. Install Safestrap again.
DOWNLOADS:
CONFIRM THAT YOU ARE USING A SAMSUNG GALAXY S4 (Snapdragon) [PL1/Lollipop:5.0]
LATEST ZIP: Safestrap-4.10-B01-JFLTEVZW-SS-FF-flashable.zip
LATEST APK: Safestrap-4.10-B01-JFLTEVZW.apk
androidfilehost
WARNING: Safestrap is heavily modified to be "Safe" for your device. Do not download TWRP from their website and expect it to work the same way. Also TWRP does not support Safestrap, tho some issues that may come up will be TWRP dependant, please try and contact myself or look on the forums for your device for answers before hunting down TWRP people. They won't be able to help w/ Safestrap specific questions.
Special Thanks To
@Hashcode, DeesTroy & TeamWin for all their hard work making TWRP such a fantastic recovery.
@jrkruse for the combo firmware
CHANGELOG:
- TWRP updated to 3.3.1
- Initial release.
OC1/OF1 users do not flash PL1/ENG_OF1 Bootloader you cant go back, if any tester intersted pm me.
MI1 4.2.2 ROM will uploaded soon.
Hi there! Will this work on model SCPH-I545?
heyitzrare said:
Hi there! Will this work on model SCPH-I545?
Click to expand...
Click to collapse
SCH-I545? Samsung galaxy S4 verizon variant?
afaneh92 said:
SCH-I545? Samsung galaxy S4 verizon variant?
Click to expand...
Click to collapse
Yes
heyitzrare said:
Yes
Click to expand...
Click to collapse
make sure you are on PL1 bootloader then do the instruction
afaneh92 said:
make sure you are on PL1 bootloader then do the instruction
Click to expand...
Click to collapse
Hello again! I just attempted this, to no avail. Safestrap still identifies as "not installed."
heyitzrare said:
Hello again! I just attempted this, to no avail. Safestrap still identifies as "not installed."
Click to expand...
Click to collapse
Install again, some times first click dont work.
Hello! How to make a root on PL1 Verizon? I tried to do it with KingRoot and dr.foneRoot, but it doesn’t work.
V_Den said:
Hello! How to make a root on PL1 Verizon? I tried to do it with KingRoot and dr.foneRoot, but it doesn’t work.
Click to expand...
Click to collapse
Use mobilego wondershare
afaneh92 said:
Use mobilego wondershare
Click to expand...
Click to collapse
Success! Thank you so much! The process lasted about 30 minutes. Several reboots and root done.
I need your advice. After successful installation of Safestrap, Omega I9505 V42.1 was flashed. The result is a splash screen Samsung custom. Safestrap did not boot. Installing a stoсk i545 modem and bootloader with Odin did not affect. Flashed i545 PL1 with Odin. As a result, got stuck on a splash screen Verizon.
Before the modifications, configuration was:
bootloader - I545VRSGPL1
PDA - I545VRSGPL1
CSC - I545VZWGPL1
Baseband - I545VRSGPL1
Kernel 3.4.0-4584173
I made a backup in Safestrap, but I don’t know how to install it.
What can I try to do in this situation? Thanks.
V_Den said:
I need your advice. After successful installation of Safestrap, Omega I9505 V42.1 was flashed. The result is a splash screen Samsung custom. Safestrap did not boot. Installing a stoсk i545 modem and bootloader with Odin did not affect. Flashed i545 PL1 with Odin. As a result, got stuck on a splash screen Verizon.
Before the modifications, configuration was:
bootloader - I545VRSGPL1
PDA - I545VRSGPL1
CSC - I545VZWGPL1
Baseband - I545VRSGPL1
Kernel 3.4.0-4584173
I made a backup in Safestrap, but I don’t know how to install it.
What can I try to do in this situation? Thanks.
Click to expand...
Click to collapse
Dont flash the boot.img
Use safestrap to flash the rom. Then go back to PL1 bootloaders and boot.img
I am on OF1 running stang 5 litre ROM with flash fire installed. Is there any point in going to PL1 and installing safe strap? What ROMs work with it?
StoneyJSG said:
I am on OF1 running stang 5 litre ROM with flash fire installed. Is there any point in going to PL1 and installing safe strap? What ROMs work with it?
Click to expand...
Click to collapse
If you can wait I will send you some files to test over OF1.
Do you have telegram?
afaneh92 said:
If you can wait I will send you some files to test over OF1.
Do you have telegram?
Click to expand...
Click to collapse
No sorry, I don't have telegram. I have Google drive and there's those free file upload sites too.
StoneyJSG said:
No sorry, I don't have telegram. I have Google drive and there's those free file upload sites too.
Click to expand...
Click to collapse
Can you send me your OF1 boot.img and aboot.mbn before we start
afaneh92 said:
Can you send me your OF1 boot.img and aboot.mbn before we start
Click to expand...
Click to collapse
Sure, I can upload them to my Google drive and link it here. How do I extract the aboot.mbn and boot.img from the phone?
StoneyJSG said:
Sure, I can upload them to my Google drive and link it here. How do I extract the aboot.mbn and boot.img from the phone?
Click to expand...
Click to collapse
From the tar firmware!
Im so lazy to download it, I can do it later if you dont have it.