Hello to all!!!
I have a Zte Kis Pro (Orange Zali) and everything was good until one day my gallery stops working and gives error...I made the hard reset and it didnt fix it so i thought that i need to reflash my phone and downloaded the original firmware from ZTE site http://www.ztedevices.com/support/smart_phone/a24d5475-1060-40c4-b058-349b2b2ea765.html and flashed as usual from sd card. The flashing procedure went good but after rebooting It not turning on... When I connect usb cable new device appears and after drivers install it says Qualcom HS-USB QD LOADER 9008 on com4. So Bootloader is alive and if i am not wrong i just need flasher and rom.?
Any help will be welcomed!
Thank you!
Please
I do not believe that nobody knows how to flash it ((((
Related
Hi guys, i need your help. So, i installed Chainfire 3d on my Zte kis pro (Orange zali) (bought from Orange Romania) , running Android 4.1.1 JB, without doing a backup. Of course i got stuck into a boot-loop, and I am really desperate. I haven't found any solution compatible with my phone :crying: as i think USB debugging is off. When i plug my device into my pc with a usb cable from recovery mode it says "USB Device Not Recognized". The ROM from the official ZTE website is useless as the zip file is corrupt. I treid using a zip repair program to no avail. I don't have any custom recovery or custom ROM, everything is stock and i have root. So any help would be kindly appreciated (but please explain any method with steps because i am no tech wiz ). PLEASE HELP I AM REALLY DESPERATE!!!!!!!! :crying:
Hi guys,
I just bought two brandnew Cube U27GT S (MTK 8127) tablets and tried to install a custom rom. Unfortunately the tab hard bricked while trying to flash it with SPFT. Now I can´t turn on the tab anymore - all black. I even can´t open the recovery mode and Win 7 doesn´t found the tab anymore, it shows unknown device in the device manager!?
Meanwhile I deinstalled all MTK drivers with usbdeview and installed them again with the help of the second tab. But it has no effect of the damaged one it´s still an unkown device.
Maybe anyone has an idea how to unbrick it? Would be great to get any help! :crying:
No hope anymore?
I have the same problem can only get into recovery, factory reset does seem to do anything still hangs on boot, looks like I need to update via sdcard?
Hi Guys
i have bricked my Vodafone VF685/ Alcatel Pop D1/ Huawei U1860 or whatever make this is (quite confusing) with SP Flash tool MT6572.
I tried to flash CWM recovery (successfully rooted with KingRoot) with the Scatter file compatible with the SP Tool version. All went well, bur my phone didnt want to go past the start up logo. So i tried flashing it again, and now it doesnt want to switch on nor charge, cant boot into recovery. Just a dead phone with a black screen. My pc doesnt pick up my phone via usb and i get error code 4004, i did some searching on how to fix the error code but im still stuck in a rut...
Any advice on how to fix this and please any advice on how to tell which recovery and scatter and firmware is for this phone?
Model: V685-1
SVN: 120HJG1
MANF: TCT MOBILE LTD
CU REF: V685-2AVDZA1
Thank you in advance, i really appreciate your help and advice.
Johan
Well, this is quite dissappointing... Not a yes or a no... Nothing....
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Costi979 said:
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Click to expand...
Click to collapse
So use ZTE tool studio emmc tool to unbrick your android.
Follow guide of Androidbrick.com.
The tool posted on these site is actually a ZTE tool studio tool by name of Androidbrick tool.
Just Google and download it from torforum.org
Already tried,not working.I cannot swich phone in download mode
Costi979 said:
Already tried,not working.I cannot swich phone in download mode
Click to expand...
Click to collapse
These tool unbrick your android when no fastboot, no recovery, not booting by anyways. Just detects in 9008 port. I am sure it's better than Qfil.
That`s the problem with port detection
How does this happened ?
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Barnabe02 said:
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Click to expand...
Click to collapse
Sorry if u have issues to. My problem started when i erased via adb one partition . Twrp works fine
Hello everyone,
after putting my phone in download mode, I flashed the wrong kdz, so now it doesn't boot in anyway:
I have no fastboot, no download mode, it does not switch ON.
I found several guides on the internet , but none of them seems to work.
Can you help me? Thanks
eagle93 said:
hello everyone,
after putting my phone in download mode, i flashed the wrong kdz, so now it doesn't boot in anyway:
I have no fastboot, no download mode, it does not switch on.
I found several guides on the internet , but none of them seems to work.
Can you help me? Thanks
Click to expand...
Click to collapse
i have this same problem
Hi,
same issue - Unbrick LG V10 (H960a) stuck in Qualcomm HS-USB QDLoader 9008 mode
Ive searched and find several solutions, buitr not for H960a.
Like:
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
Do anybody have IMG for SD card to boot to downloadmode and fix this brick?
Mayby any familiar version wioll work too (Ive tried already H9012j, H81120o, and H901)
This also did not worked
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
hai friends please help me.. my v10 is F600L but my friend by mis falshed with h961N that one dual sim and my F600L is single sim after flash no network so I tried to falsh back to F600L but my phone dead now after 90% flash.
only vibrate when i press power button
pc also not detecting anything like qhsusb or nothing
no download mode nothing
please any expert here help me...
hope any guy know about it
thanks in advance
Lg v10 h960a
Hi, I have the same problem, could you fix it? Thank you
I'm fighting with my fiends phone for over 3 days now, same as yours 960A. What i did is, try to heat the CPU up, rly rly high, and then try to turn on/fastboot it. If its not working, put it into freezer, and try to boot it inside a freezer. After 2 days i managed to get to fastboot few times, flashed stock firmware and right now im stuck on bootloop, but that is fixable. Just play around with heat, this phone is bricked anyways so dont be scared to take of heat sink and just blow your hair dryer straight to CPU.
xsoft said:
Hi,
same issue - Unbrick LG V10 (H960a) stuck in Qualcomm HS-USB QDLoader 9008 mode
Ive searched and find several solutions, buitr not for H960a.
Like:
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
Do anybody have IMG for SD card to boot to downloadmode and fix this brick?
Mayby any familiar version wioll work too (Ive tried already H9012j, H81120o, and H901)
This also did not worked
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Click to expand...
Click to collapse
Pls share the lg v10 H9012j.img file pls.