hi guys, i have a huawei mediapad s701 vogue, i only did a factory reset data from the system and after that it restarts and the android screen logo appear and it does not finish it's state it only show's the screen and if turns on and off nothing happen until the battery is drained.
after the battery drained i try to charged and press the power button and power up volume key and there is no vibration and it shows the green android again and again and again
then i try to download the exact firmware and put it on my sd card to flash it but there is still no changes
can anyone help me with this matter?
Please edit the title of your post to show which MediaPad you have.
Related
Hello Guys,
I am facing an uncommon issue.. Yesterday i was using my phone normally and suddenly it started to bootlooping. I thought it is a normal boot loop so tried to enter into recovery mod but no luck.:crying::crying::crying:
Then i tried To start odin to flash stock ROM. but after i enter into download mode it asks do you want to continue... Nothing happens when i press up volume key and after few moments phone reboots. At first I thought it was a Volume key issue. But even if i keep it on the confirmation window the phone reboot in sometime..
One more thing when i kept phone for charging it shows charging icon for some time and then it shuts down and shows charging icon again..
If anyone have any solution please help..
Thanks
Sounds like the power button is shorted out, warranty repair required.
What rom are you on? More details needed..
Hi,
I have phone Lenovo S820 (mt6572) and I have huge problem.
After I bought it, it work within 4 hours. Next it restart itself and stopped on Lenovo logo.
I tried factory reset and nothing happened. I enter Chinese menu, click on one option and from now on it stopped on Android logo, of course it didn’t turn on. Still it doesn’t work. (With SIM card, without it, SD card ect).
Moreover, I tried to install new software. I found and install by Flash tool Lenovo S820 copy mt6572 Multilanguage RoM from needrom BUT, I push Firmware->Upgrade button instead of download. From that moment in general it doesn’t start at all.
My computer see it as MKT USB Port.
I don’t have backup (or it doesn’t work), cause I didn’t create it earlier.
Pls help, because I have new phone and I can’t use it
Thx
It might be a softbrick or bootloop
Hi the softbrick doesn't do as much harm as a brick (brick meens it can't be fixed and it has the value of a brick nothing)a softbrick you can fix by having a micro SDcard (or normal if your phone uses that) format it and make it a ''bootableSDcard'' (see a video on YouTube) then get a customrom and put it on your card place it inn it's place in the phone and turn it on it should bring you to a image of a android with open belly under its a progress bar when it's finished your device will restart and boot up as new
Unfortunately, my phone, didn't react to keys combination (power + vol up, or down)
Battery charded all night, but I don't know if it is full.
klejoo said:
Unfortunately, my phone, didn't react to keys combination (power + vol up, or down)
Battery charded all night, but I don't know if it is full.
Click to expand...
Click to collapse
hey, could you please tell me how did you resolve your problem?
i happen to be in the same situation.
Hello to all,I am in a serious trouble with my samsung galaxy player 5.0 International China version . I rooted this with super one click.And it was successful and there was no problem.But as soon as I overwrote a file in lib folder of system,it got stuck.I tapped the power key and the screens light was gone.I again tapped but there was no response.So I held the power key for a while and the device restarted.But it got stuck on samsung logo and began to restart again and again.So I took it to download mode and tried to nand erase with odin,I thought it could format the device and my device would be fixed.But it took some time and I closed odin.Then I held the power key and it restarted with a black screen containing a picture of malfunctioning connection between a phone and computer at its middle.Then I again tried to t-flash it and again closed it without completion because my notebook had no charge.After that I flashed my device with the YP-G70-Kernel-r14 and it restarted with download mode.But if I hold the power key for a while it restart and again go to the brick showing screen(I heard that this brick is called soft brick).I downloaded two stock rom STOCK_G70XXKPH_G70XXKPH_XEF and G70XXKPL_G70XXKPL_XEF.I tried to flash them in my device with odin and they succeeded.But none of them could fix my problem.They remain in download mode and if I hold the power key the device again go to the soft bricked screen.My device isn't force shutting down.If I hold the power key the screen goes and again lights up with the bricked screen.Now,my device has become very hot and after 8-9 hours it has automatically turned off.But if I connect it to the charger it again lighten up with bricked screen.
Now,I am wanting to setup a clean and clear version of android 2.2/2.3.6 in my device.Is it possible?Will this fix my problem?If it does then please explain me the steps.Or if there is any other way to fix then please help me.
N.B. I am junior about andorid root,rom etc.It is the first device I rooted successfully.
Sorry for my bad and wrong English.
Please,help.I am in a bad danger.
BFahim said:
Hello to all,I am in a serious trouble with my samsung galaxy player 5.0 International China version . I rooted this with super one click.And it was successful and there was no problem.But as soon as I overwrote a file in lib folder of system,it got stuck.I tapped the power key and the screens light was gone.I again tapped but there was no response.So I held the power key for a while and the device restarted.But it got stuck on samsung logo and began to restart again and again.So I took it to download mode and tried to nand erase with odin,I thought it could format the device and my device would be fixed.But it took some time and I closed odin.Then I held the power key and it restarted with a black screen containing a picture of malfunctioning connection between a phone and computer at its middle.Then I again tried to t-flash it and again closed it without completion because my notebook had no charge.After that I flashed my device with the YP-G70-Kernel-r14 and it restarted with download mode.But if I hold the power key for a while it restart and again go to the brick showing screen(I heard that this brick is called soft brick).I downloaded two stock rom STOCK_G70XXKPH_G70XXKPH_XEF and G70XXKPL_G70XXKPL_XEF.I tried to flash them in my device with odin and they succeeded.But none of them could fix my problem.They remain in download mode and if I hold the power key the device again go to the soft bricked screen.My device isn't force shutting down.If I hold the power key the screen goes and again lights up with the bricked screen.Now,my device has become very hot and after 8-9 hours it has automatically turned off.But if I connect it to the charger it again lighten up with bricked screen.
Now,I am wanting to setup a clean and clear version of android 2.2/2.3.6 in my device.Is it possible?Will this fix my problem?If it does then please explain me the steps.Or if there is any other way to fix then please help me.
N.B. I am junior about andorid root,rom etc.It is the first device I rooted successfully.
Sorry for my bad and wrong English.
Please,help.I am in a bad danger.
Click to expand...
Click to collapse
remove your battery and wait 20 seconds plug in your charger without battery wait for 30 seconds then plug out charger then put your battery battery back then charge it try to turn it on
hope it helps
BFahim said:
Hello to all,I am in a serious trouble with my samsung galaxy player 5.0 International China version . I rooted this with super one click.And it was successful and there was no problem.But as soon as I overwrote a file in lib folder of system,it got stuck.I tapped the power key and the screens light was gone.I again tapped but there was no response.So I held the power key for a while and the device restarted.But it got stuck on samsung logo and began to restart again and again.So I took it to download mode and tried to nand erase with odin,I thought it could format the device and my device would be fixed.But it took some time and I closed odin.Then I held the power key and it restarted with a black screen containing a picture of malfunctioning connection between a phone and computer at its middle.Then I again tried to t-flash it and again closed it without completion because my notebook had no charge.After that I flashed my device with the YP-G70-Kernel-r14 and it restarted with download mode.But if I hold the power key for a while it restart and again go to the brick showing screen(I heard that this brick is called soft brick).I downloaded two stock rom STOCK_G70XXKPH_G70XXKPH_XEF and G70XXKPL_G70XXKPL_XEF.I tried to flash them in my device with odin and they succeeded.But none of them could fix my problem.They remain in download mode and if I hold the power key the device again go to the soft bricked screen.My device isn't force shutting down.If I hold the power key the screen goes and again lights up with the bricked screen.Now,my device has become very hot and after 8-9 hours it has automatically turned off.But if I connect it to the charger it again lighten up with bricked screen.
Now,I am wanting to setup a clean and clear version of android 2.2/2.3.6 in my device.Is it possible?Will this fix my problem?If it does then please explain me the steps.Or if there is any other way to fix then please help me.
N.B. I am junior about andorid root,rom etc.It is the first device I rooted successfully.
Sorry for my bad and wrong English.
Please,help.I am in a bad danger.
Click to expand...
Click to collapse
I don't have a samsung device myself but if you can get in download mode and you can from what you described. What happened is that you deleted a driver (from the lib folder) that was necessary for boot (something important). To get to stock go here http://forum.xda-developers.com/showthread.php?t=2192488 download the right Firmware for your device. And the right pit file (pit file is the partition layout of the device). Flash using the pit file you got. You will fix that. Good luck.
Stock rom and pit file downloaded
cedie said:
remove your battery and wait 20 seconds plug in your charger without battery wait for 30 seconds then plug out charger then put your battery battery back then charge it try to turn it on
hope it helps
Click to expand...
Click to collapse
So,I am in the download mode.I downloaded the firmware (XXXKPL) and the intl pit file.Now what options would be checked in odin and where will I put the firmware file(PDA or Bootloader)?The device has no charge.If I connect to the charger,it wakes up and becomes very hot than normal.And I can't turn it off.Its battery is non-removable.Thank you for your valuable help.
hey guys , i have a problem with my i9300 when
i lock screen screen turns off and device locks but when i press power button somtimes the screen won't turn on!
and the home button doesn't work too!
if i leave the device it will reboot automaticly but it won't boot & just shows samsung boot animation!(it will soft reboot)
i should hold the power button till the device restarts and it will boot currectly but after three or four seconds the device jams again!!!!!
i should do this work for two or tree times to make the device is workable
but it will jam after a time!and i should do this prosess again!
do you have any suggestion that may solve my problem?
(kernel:arter-97 4.0.3 android 4.3 Official UAE recovery:TWRP)
(sorry if i had grammeral mistakes !my mothertongue is not english!)
Go back to totally stock firmware after a full wipe. If still the same then probably your nand memory is worn out.
Guys I need help ...this morning my phone restarted while charging and got stuck on huawei logo screen. i tried different combinations of Power + Volume up and down buttons but it didnt go to any other screen. then i installed hisuite on my PC and connected to my phone through USB cable, and holding volume down button i got to this screen which says FAST BOOT&RESCUE MODE and further reads "Phone Locked" "FRP Lock" in the end below Android logo.
i want to access my phone contents and get backup as I have important files to recover. Please I need some help with detailed step by step procedure to help me get through without damaging my phone or its content. I am hoping some nice techie can write me the steps needed to be taken considering I am a complete noob.
Try forcing your way into the recovery and clearing cache
Vol up + power without having it plugged in
Just keep it pressed for 1 min + if you have to until you see the recovery
When the phone vibrates and turns on let go of the power button so it won't cycle
Zep0th said:
Try forcing your way into the recovery and clearing cache
Vol up + power without having it plugged in
Just keep it pressed for 1 min + if you have to until you see the recovery
When the phone vibrates and turns on let go of the power button so it won't cycle
Click to expand...
Click to collapse
hi buddy,
i tried but no luck
Any news? I got one in the same condition. When its in eRecovery and i try to update it shows "can't get update info(or something like that)", it doesn't have factory reset button available, it doesn't have wipe button available. When I put it in fastboot, it shows Phone "Locked" and "FRP Lock".
Wtf do I do with this brick?
Thank you in advance! ( Be aware guys! I was scammed with it on the internet - full box, like new, and it doesn't even get into android)
Hi mate
Did you solve this in the end?
John Smith234 said:
Hi mate
Did you solve this in the end?
Click to expand...
Click to collapse
no mate ... the phone is not usable anymore as i couldn't get it fixed from anywhere nor found any solution online
ahmowais said:
i want to access my phone contents and get backup as I have important files to recover.
Click to expand...
Click to collapse
Hi,
have you tried Emergency Backup?
- Turn off your phone and connect it to your computer using USB cable. Press and hold the Volume Up and Power Button for 15 seconds, until the device restarts and enters the eRecovery mode. Select "Emergency backup" . Works on EMUI 9.1 only!
IMO theres no other way to save your data...
ahmowais said:
no mate ... the phone is not usable anymore as i couldn't get it fixed from anywhere nor found any solution online
Click to expand...
Click to collapse
That sucks, I think I got exactly the same problem, have tried all kind of combinations. Only different appearing window is fastboot but that is totally useless as the device doesnt appear on Hisuite either. What happens when the batter totally drains ?
---------- Post added at 04:29 PM ---------- Previous post was at 04:26 PM ----------
- Turn off your phone and connect it to your computer using USB cable. Press and hold the Volume Up and Power Button for 15 seconds, until the device restarts and enters the eRecovery mode. Select "Emergency backup" . Works on EMUI 9.1 only!
IMO theres no other way to save your data...[/QUOTE]
Phone does not turn off, and whatever button you press it just keeps showing Huawei start screen except for volume down and power button combination which opens fast boot window. Do you how to connect the device to laptop while in fastboot mode? We have tried fastboot commands on terminal but didnt get anywhere with file recovery...
so no solution?
U can do it, but u need dissasembly the phone, to make test point, if phone isn't hw damaged yes u can fix it in that way
hi may I ask if you have resolved the problem? Been experiencing the same problem when my huawei p20 lite got stuck on a startup logo screen
same problem with me, phone is stuck on start up logo, not moving anywhere despite using all the tricks, any solutions, anyone have?
Hi, I have same problem. Stuck on HUAWEI logo and power off do restart.
Phone is with last stock FW, FRP and BOOTL. locked. I tried update from SD card, but no succes. All buttons combinations not working except fastboot. But in fastboot, there is no possibility to do something due to locked btldr.
But I have one advantage, I have same phone model with same firmware working. Is there any possibility to recover bad piece?
*bump*
anyone who fixed this ?