[Q] Can not reset to factory settings - LG G Watch

Hello,
I can not do the factory restart on LG Watch W100. I can not get to the settings menu. The watches are running all the time and showing me what I can do with them but when I am trying to reach the menu through ok google command - when I see the red button in the right corner I can not go to settings. I want to do the factory reset because I can not pair the watches with mobile device.
Do you have any idea what to do?
Thanks!

In the settings choose "unpaired from phone". Then it will ask you to confirm factory reset.

Related

[Q] hard reset unit with nordic 2.1 already installed?

I have installed the Nordic 2.1 and I am trying to clean everthing off the phone so that I can give it to my girlfriend. I read online I need to do the following steps:
1.From the main home screen, tap menu
2.Tap Settings, then SD card & phone storage
3.Tap Factory data reset
4.Tap Reset phone
5.Enter your password, then tap Erase everything to confirm
however, I don't have the Factory data reset selection in that menu... is this a problem with the nordic rom? how I factory reset my phone now?
-Thanks
vmiku914 said:
I have installed the Nordic 2.1 and I am trying to clean everthing off the phone so that I can give it to my girlfriend. I read online I need to do the following steps:
1.From the main home screen, tap menu
2.Tap Settings, then SD card & phone storage
3.Tap Factory data reset
4.Tap Reset phone
5.Enter your password, then tap Erase everything to confirm
however, I don't have the Factory data reset selection in that menu... is this a problem with the nordic rom? how I factory reset my phone now?
-Thanks
Click to expand...
Click to collapse
Its in the "privacy" setting not "sd card" settings in 2.1

[Q] Micromax A110 Restarting again and again

Hi guys Im new here.
Today i just downloaded superflashlight.apk file from web(not from playstore) and installed using 'verify and install' option.then Google recommended.that you should not install this app cause it contains some code that bypass android security... .I ignored it and installed.but after 1 minute my phone started restarting.I removed battery and again same problem.It boots for only 5 seconds and then restarts, Its like a circular Loop that never ends.
So factory reset was only the option.I tried going into settings as fast as i can but it gets hangs and restart before I reach the 'Erase Everything' option.
So I tried resetting using volume+,-and power button and i got shocked:crying: I still can't reset cause,my 'Menu' button works only once then its like a dead(means i can select wipe/factory data but can't select submenu 'yes').Can't do anything.I've also tested it n factory mode->Full test. and there also my back button and menu button was not getting detected. So I hv only option left that i should reset using pc/laptop
Anyone pls suggest me how can i do that.(remember that phone gets restarts in 5sec after every boot.)

LG F100s LG optimus VU Android system recovery 3e Problem

Hi I have a LG F100S (LG OPTIMUS VU)
The phone is restarting itself sometimes and after uninstalling programs and files the programs and files are coming back. I also tried uninstalling from google play but programs keep coming back. Also my phone is giving warning as Unfortunately xxx. program.stopped.
I tried safe boot by pressing long to turn off and the device asked me to confirm safe boot but the restart was not in safe boot.
I moved the battery and placed it back (the battery is not removable its attached with a screw)
I try factroy reset from the app menu but it didnt worked as well.
I tried to delete files from settings / storage but files came back.
I tried to hard reset by key combination but i recieved the dead android robot with a caution mark in a triangle in his chest.
I tried to go in to recovery menu by pressing home touch button and I have the Android system Recovery 3e screen as:
Volume up/down to move highlight:
enter button to select
reboot sytem now
apply update from ADB
wipe data/factory reset
wipe cache partition
I can highlight these options with volume keys where as I cant select it. I tried all of the buttons on my phone but can not be able to select any of these options.
My phone is not rooted. I also used LG Mobile Support tool to update my firmware from V40C to V40E the process done without anyproblems but when the phone restarted the firmware was same V40C.
My problem is my phone seem to be in a kind of boot loop. Maybe the clean master is causing the problem or some other software
I can use my phone for hours only I am receiving unfortunatelly.xxx.program.stopped. and I cant unistall programs or dlete files or install new programs.
hope I can take some help.
Note I searched the google and XDA for a solution but there was no helpful answer.

Aisstance Requested, No idea how to reset the phones data to stock

Ok so in a nutshell I was trying to FRP unlock my friends phone. Problem is that it kept bringing up an error while loading the setup. I finally got it to where i input the account information (as the owner) and I was able to open settings through bugging out the voice search (I also could open file manager).
I noticed unknown sources was greyed out.
Before consideriing doing a factory reset I went ahead and took my friends advice and stopped setup.apk and google play services.apk
When zi went to clear the data it ended up taking me to the very first start screen, I was just a few steps from completion.
Now after I say setup new device the phone switches between activating network and clicking setup new device. Even clicking emergency call does nothing.'
Meanwhile when talkback is on she informs me how every single play services, gmail, and contact app stop working.
In summary, I want to factory data reset the phone.
Chimeratools. load stock firmware -> reloads firmware but doesn't wipe the current data (refurbish not available for this device, only load)
LGUP -> Load is available, but refurbish is not
Hard Keys -> Apparently the G5 doesnt have hard key capability
TWRP -> thing is not oem unlocked
ADB into stock recovery -> ADB will not work.......not usb debugging.
Please assist
With the phone shutoff hold volume down and power, as soon as you see the lg screen release the power button then quickly repress it. make sure to not let go of the volume down button. it might take a few tries but you should be able to get into factory reset menu
firenemesis7 said:
With the phone shutoff hold volume down and power, as soon as you see the lg screen release the power button then quickly repress it. make sure to not let go of the volume down button. it might take a few tries but you should be able to get into factory reset menu
Click to expand...
Click to collapse
This doesn't work...no matter how many times you try the volume down/power release and reapply procedure ...it never get in to factory reset mode. Any other ideas?

[Hisense A5] "Bricked" the device enabline hardware acceleration

Hello Community,
I got my Hisense A5 as a second hand device – possibly from chinahandys. It had google apps installed and no visible chinese bloatware.
Played around a bit for a few days then enabled developer settings and by accident checked some screen / hardware acceleration options.
Immediately after, the eink display did not update showing vertical lines. After rebooting, I still see the Hisense logo and immediately after that, vertical lines / glitches.
Obviously, the phone works as I can answer calls (by sliding my finger "blindly" across the spot the UI elements are) but I cannot see what I am doing as the screen never refeshes anymore. However, I can confirm the screen itself is working as it cleans/resets and shows the clean logo after a reset. Immediately after that, it freezes again and shows vertical lines only.
I tried holding down Vol down + Power and resetting the phone (deleting user data as fas as I could translate the CN font) but that did not reset the system / wipe the settings.
As the screen does not respnd / update, I cannot even select the transfer mode after connecting a USB cable. ADB cannot connect the device.
Can anybody help?
Thanks!
login to google account and remote erase device
https://www.google.com/android/devicemanager
in case you don't have bonded google account, boot into Android System Recovery <3e> (in english language!) and factory reset device.
Warning: Don't do this if you forgot google password, factory reset from recovery mode will trigger FRP lock.
https://www.hardreset.info/devices/hisense/hisense-a5/recovery-mode
aIecxs said:
login to google account and remote erase device
https://www.google.com/android/devicemanager
in case you don't have bonded google account, boot into Android System Recovery <3e> (in english language!) and factory reset device.
Warning: Don't do this if you forgot google password, factory reset from recovery mode will trigger FRP lock.
https://www.hardreset.info/devices/hisense/hisense-a5/recovery-mode
Click to expand...
Click to collapse
Hi and thanks for your advice.
I was able to reset the phone via the VISION recovery (I don't know why the phone did not load into bootloader).
For anyone coming across this: I used another phone to translate the chinese text using google translate / camera and found out the reset & wipe option requires you to press VOLUME to confirm. In the past, I only selected the one available option button but that turned out to to be "abort & reboot".
Thanks again!

Categories

Resources