In middle left side of my lg g3 screen
Befor week appear yellow Spot
Please need to help
m993d said:
In middle left side of my lg g3 screen
Befor week appear yellow Spot
Please need to help
Click to expand...
Click to collapse
Was it compressed in any way? Does it look like a thumbprint? Honestly, if you have no warranty I think you're screwed. Front assemblies are @$90 on eBay:
http://www.ebay.com/sch/i.html?_odk...sembly&_nkw=vs985+front+assembly&_sacat=43304
h
Its small spot
When i charged my phone
It was appeared
You'd get better help if you could post a pic bro.
pic
startswithPendswithOOH said:
You'd get better help if you could post a pic bro.
Click to expand...
Click to collapse
This is the pic
Its small
Delete
Related
hi every body
when i take photo (incandescent mode on white balance) the picture have a thin green line on upper quarter, every thing else is good. and in low light the auto white balance is incandescent, so i cant take photo in night.
is that is a software problem or hardware problem. after rooting is the same, does i loose my warrenty, can i unroot my device, i have x10a from rogers.
see attachment
sjouni said:
hi every body
when i take photo (incandescent mode on white balance) the picture have a thin green line on upper quarter
Click to expand...
Click to collapse
Post a picture.
sjouni said:
is that is a software problem or hardware problem
Click to expand...
Click to collapse
Will be easier to answer with a picture.
sjouni said:
does i loose my warrenty, can i unroot my device
Click to expand...
Click to collapse
This is why people should take the time to learn what it is, then you would already know that it does and you can.
yes, it will void the warranty.
on the other hand...
"Just a quick reply to say "SE will not put in any efforts to simplify the process for users" is correct." - Jeff-SEAnswers
source: http://talk.sonyericsson.com/message/19995
I was reading around the S3 forum.. notice some guy making a big noise about the screen flaw...
Here is the problem... i mistakenly drop my S3 on the back(lucky not front facing), nothing happen button everything ok.. but suddenly I notice the screen has a black border around it.. before it drop there was no border around it. So i'm really curious is this normal or there is a setting to remove it. If u can notice the picture i took of my phone.. any S3 owner out there can clarify for me this is normal or not?
Mine has the same black border. Didnt notice it before your post though
Thats odd, mine doesnt. Could be faulty. Email Samsung and add the pic. Dont tell them you dropped it tho.
Sent from my GT-I9300 using XDA
Yeah it's supposed to have a 2mm black border but weirdly most people never notice it until it gets pointed out.
I think it's normal.
I have them too.
It's probably hardware related so don't expect a fix.
I understand there suppose to be a black border but look at my picture it seems to be larger than usual.. who should i email to in smasung.. i'm from Malaysia
Does factory reset solve the problem?
danlegion said:
before it drop there was no border around it
Click to expand...
Click to collapse
Yes there was!
Picture's too small so can't really see but it looks normal, and like I said most people don't notice the border until it's pointed out and then when you notice it looks huge.
it not suppose to be so thick? i believe and its only on the lock screen...
Try to upload a better picture.
There IS a black border its normal...
No, that's not normal. The border isn't supposed to be that large. The border on mine is barely noticeably against the white of the border.
Baldilocks said:
No, that's not normal. The border isn't supposed to be that large. The border on mine is barely noticeably against the white of the border.
Click to expand...
Click to collapse
Well there`s something wrong with my phone then cos it looks just like that one..
I wish I had another camera to take a picture with..... but yes, that's definitely not right.
Baldilocks said:
I wish I had another camera to take a picture with..... but yes, that's definitely not right.
Click to expand...
Click to collapse
What about doing a screen shot of it.
johnboywilson said:
What about doing a screen shot of it.
Click to expand...
Click to collapse
That doesn't capture anything outside of the usable screen area. I'll try to borrow a camera later.
http://dl.xda-developers.com/attach...fe31782238/4fe1f2de/1/0/9/4/5/8/6/SIII_04.jpg
Here is a picture of the phone that shows the border. Its taken from the forum, not my picture. But mine looks the same.
Maybe this is a clearer picture? This is only at the lock screen... i remember b4 the incident it not suppose to be like this... I've also done a screen shot of it.. u notice it has a BIG black border around it... i'm seriously thinking does factory reset solve this problem.. cause its only at the lock screen
Baldilocks said:
That doesn't capture anything outside of the usable screen area. I'll try to borrow a camera later.
Click to expand...
Click to collapse
LOL yeh, just ignore me I was been thick!!!
---------- Post added at 05:03 PM ---------- Previous post was at 05:01 PM ----------
danlegion said:
Maybe this is a clearer picture? This is only at the lock screen... i remember b4 the incident it not suppose to be like this
Click to expand...
Click to collapse
Hell yeh thats way thicker than mine. Sorry. It does look broken..
so i have the phone for 7 days now, and yesterday i noticed this. (add on imgur link)
/tWgbr
/BjbNm
also my battery back cover seems to have little space in upper right corner, should i ask for new one ? other than that it's all good.
twingley said:
so i have the phone for 7 days now, and yesterday i noticed this. (add on imgur link)
/tWgbr
/BjbNm
also my battery back cover seems to have little space in upper right corner, should i ask for new one ? other than that it's all good.
Click to expand...
Click to collapse
we don't see the image reupload it
bletti 1811
erto90 said:
we don't see the image reupload it
Click to expand...
Click to collapse
hmm i can see it. did you add www imgur com in front of the code
Haven't seen the picture yet but still gonna confidently say it's just a dead/stuck pixel.
twingley said:
so i have the phone for 7 days now, and yesterday i noticed this. (add on imgur link)
/tWgbr
/BjbNm
also my battery back cover seems to have little space in upper right corner, should i ask for new one ? other than that it's all good.
Click to expand...
Click to collapse
Well I have received a Nexus with dirt underneath before and had a refund. I never had dirt going under the screen if the screen was clean in the first place for any Galaxy phones. My SIII back cover also doesn't snap in smoothly on all edges, I think its simply poor design.
Please clean the screen before taking photos. It's really smeared.
Go to a dark room (I mean really dark) and check if that 'speck' seems to light or not. If yes, then it's a bright pixel (one that lights but should not)
No matter the picture, I find the TPU case (with plugs for both connectors) does a nice job of keeping dust out of the phone. It even goes over the bevel in the front so if there is a gap there, the damage should be minimised (dust wise)
d4fseeker said:
Please clean the screen before taking photos. It's really smeared.
Go to a dark room (I mean really dark) and check if that 'speck' seems to light or not. If yes, then it's a bright pixel (one that lights but should not)
Click to expand...
Click to collapse
nothing light, and i guess if its so dustproof i shall return it and demand new one
Hi everybody, I need some advice about replacing the screen of the i9100.
I have already done all the disassembly, and I have to put everything together. I have seen in a tutorial that it is suggested to replace the double sided tape along the edges of the screen, and especially in the part of the screen between the actual screen and the softkeys, in order to prevent the light from bleeding.
Anyone can confirm or clarify this?
Thx in advance
Ive not seen a guide that tells you to put it on the screen. I would only out it around the edge and across the top of the hardware keys near the screen not on the hardware keys themselves
andrewwright said:
Ive not seen a guide that tells you to put it on the screen. I would only out it around the edge and across the top of the hardware keys near the screen not on the hardware keys themselves
Click to expand...
Click to collapse
No, I wans't about to tape the capacitive soft keys yet here there is a pic for further explanation. The red part is the old tape, and the green one iis the tape I wans't sure of. In the tutoria it suggests to replace only the green one to avoid light blleding into the screen, and it says one should use the tape under the new screen (which is the orange part).
Do I need to replace the red parts around the edges or the orange and the green would be enough?
Thx in advance :laugh:
totalnoob34 said:
No, I wans't about to tape the capacitive soft keys yet here there is a pic for further explanation. The red part is the old tape, and the green one iis the tape I wans't sure of. In the tutoria it suggests to replace only the green one to avoid light blleding into the screen, and it says one should use the tape under the new screen (which is the orange part).
Do I need to replace the red parts around the edges or the orange and the green would be enough?
Thx in advance :laugh:
Click to expand...
Click to collapse
Check the 'Youtube VIdeo Guide' link on the same below ma8
http://www.youtube.com/watch?v=65pvAINg2ME&feature=bf_next&list=HL1340367484
Sun90 said:
Check the 'Youtube VIdeo Guide' link on the same below ma8
http://www.youtube.com/watch?v=65pvAINg2ME&feature=bf_next&list=HL1340367484
Click to expand...
Click to collapse
Yep, that's the guide I was talking about. He just puts the screen on, but says that you should put the green adhesive to avoid light bleed, do you suggest doing so or not?
totalnoob34 said:
Yep, that's the guide I was talking about. He just puts the screen on, but says that you should put the green adhesive to avoid light bleed, do you suggest doing so or not?
Click to expand...
Click to collapse
AFAIK its not needed ma8
But if u can tell me in that video guide exactly at what point (Time) its said so then i can check the same
Sun90 said:
AFAIK its not needed ma8
But if u can tell me in that video guide exactly at what point (Time) its said so then i can check the same
Click to expand...
Click to collapse
After 13.40
thx man
totalnoob34 said:
After 13.40
thx man
Click to expand...
Click to collapse
Ok, i went thro that guide and he says it would not be a problem though, so u can just proceed and replace the screen ma8
Good Luck !
Sun90 said:
Ok, i went thro that guide and he says it would not be a problem though, so u can just proceed and replace the screen ma8
Good Luck !
Click to expand...
Click to collapse
Thanks, thanks, thanks. You made my day :highfive:
Sent from my Desire S using xda app-developers app
The L in the front bottom LG logo fell off. Has anyone had this happen to their V10? Not a major issue but a disappointment nonethless
No but I'll be sure to wipe gently on the bottom part of the phone next time after reading this.
BurtGummer said:
The L in the front bottom LG logo fell off. Has anyone had this happen to their V10? Not a major issue but a disappointment nonethless
Click to expand...
Click to collapse
Lol i checked my logo after reading this. No issue with me. Its indented in. Idk what v10 you have or where you got it.
LASERWOLF452 said:
Lol i checked my logo after reading this. No issue with me. Its indented in. Idk what v10 you have or where you got it.
Click to expand...
Click to collapse
VS990. It's indented but if you look closely the letters and emblem are stickers
BurtGummer said:
VS990. It's indented but if you look closely the letters and emblem are stickers
Click to expand...
Click to collapse
Oh ok. My phone is only a month in a half old