Please, My Device Xperia U , stuck at sony logo , because I do not accidentally wipe all in TWRP including data and systems , so my hp no OS installed , plus my device is not detected by the PC , " USB Not Regocnize " and I confused what to do . not detected by flashtool also , what should I do ... :crying:
Did u clear SD card also ?,,,,,
in flashtool there is driver folder ,,, install driver for u xperia u and fastboot and flashboot also and try ,,,,,
Related
Okay guys, seems like my sister wants to use my old Xperia X10 but I think I bricked it (not sure, I'm not too familiar with this stuff). Here's the deal: I had FeraLab installed on my phone (not sure which version but it's probably around v33 or v34). Anyway, I recently got a new Xperia Z1 and I took the SD card from the X10 and put it on my Z1 and I fully wiped the SD card. Now, I think the necessary files for the X10 to work were on the SD card but now those files are gone . I tried turning my Xperia X10 on but it's just stuck on the FeraLab logo and won't go any further. I tried going into recovery mode by pressing the back button constantly but it won't go into recovery mode. Flashtool and Sony PC Companion won't recognize the phone when I connect it with USB to my laptop. What do I do? Please help.
Instal drivers from flash tool . then try use SUS from here .
This is soft bricked so dont worry . You have bootloader unlocked right ? ok anyway you can try flash kernel via cmd (android SDK must be instaled) . If you laptop not reconize your phone you must instal drivers "fastboot" like from sony dev site.
Now i waiting for you reply
hello . i just install CWM and Flash Rom Pure xperia Z2 . then after complete flashing i reboot device . but the device wont turn on .
i try many ways like PC Companion , Flash Mode , Recovery Mode and Fastboot . but all can't work
only plug in usb\charge red light shows up .
#please Help my XPC
It's a 4 months ago i flashed this CM9 on my locked bootloader using SEMC Debrand Engine and installed this recovery CWM Touch :angel:
but today , i have connected my phone to PC .... my PC can't Recognize My Android Phone
after that , i downloaded a flashable stock rom zip 6.1.1.B.1.100 cause i think that if i recovered my Stock ROM it will work ... but ,
failed ! can't connect and RECOVERY DELETED CAUSE I HAVE A BL !
now i have a second problem ,,, how to restore recovery without USB ! ( CWM Touch for BL requires ADB - it's a windows tool !)
PLS HEEEEEEEEEEEELP !!!!!! :crying:
Note : i have tried another USB CABLE and another PC and phone only charges...
Hello guys i have a huge problem about xperia mini st15i. I dont have a system installed on it so i cant use it or start it. I have a CMW but every ROM that i want to flash just stuck at the logo when i reboot the device after installation. I tryed to flash ROM via Flashtool but it says that i dont have installed driver, and when i go to flashtool folder and start the installation for drivers it dont have driver for this device. I also tryed installing drivers for all devices but they just all failed and i dont know why. Please help me to bring back to life this device.
Thanks in advance
Hi, download driver "sony-ericsson-xperia-pro-xperia-ray-xperia-ray" from developer sonymobile site
Specs of my moto c.
Chipset: mediatek 6580m
Cámara: 5 mpx
Scren: 580 x 854
Ram: 1 gigabyte
This is the 3g versión only.
The way i bricked was wipped al the memory whit the TWRP of the device and the sdcard, i deleted the android os 7 , and now i dont have android OS in my phone and i cant use it.
STATE OF THE PHONE
-I have acces to the TWRP main menú.
- I can wipe and install . zip files
- i have conection with the pc in fastboot mode WHIT OUT loop conection/disconection of the phone.
I tried to reinstall android with sp flah.
FIRST TRY :
Whit the phone turned off , and presing VOL – AND VOL + , and the sp flash waitin whit botton dowload PRESSED , i connect the phone , but the SP flash ask me for .AUTH , ( I DOWNLOADED , some .AUTH from internet and one from here XDA fórum) , i add the the .AUTH but , SP flash gives me an error “ send_failed_ bla_ bla_bla”. It doesnt work.
Maibe i dont have the correct .auth for my chipset MEDIATEK 6580M and i dont know where to look for the correct one.
SECOND TRY:
the sp flash waitin whit botton dowload PRESSED , i connect the phone WHIT OUT PRESING ANY KEY. And there you are , the phone conected …. 1,2, seconds , disconected , and again the phone conected , 1,2.3 seconds and disconected again. And so on. It dosnt work.
I dont know , how to reinstall the android os 7 ,
Someone out there knows how to unbrick my moto c?
Thank you xda fórum for the help and comments.
pics and video of the phone
ibb.co/hPK8Gw
ibb.co/eSYeOb
ibb.co/dudPpG
video of error
youtube.com/watch?v=BgW77Ke1rUI