Specs of my moto c.
Chipset: mediatek 6580m
Cámara: 5 mpx
Scren: 580 x 854
Ram: 1 gigabyte
This is the 3g versión only.
The way i bricked was wipped al the memory whit the TWRP of the device and the sdcard, i deleted the android os 7 , and now i dont have android OS in my phone and i cant use it.
STATE OF THE PHONE
-I have acces to the TWRP main menú.
- I can wipe and install . zip files
- i have conection with the pc in fastboot mode WHIT OUT loop conection/disconection of the phone.
I tried to reinstall android with sp flah.
FIRST TRY :
Whit the phone turned off , and presing VOL – AND VOL + , and the sp flash waitin whit botton dowload PRESSED , i connect the phone , but the SP flash ask me for .AUTH , ( I DOWNLOADED , some .AUTH from internet and one from here XDA fórum) , i add the the .AUTH but , SP flash gives me an error “ send_failed_ bla_ bla_bla”. It doesnt work.
Maibe i dont have the correct .auth for my chipset MEDIATEK 6580M and i dont know where to look for the correct one.
SECOND TRY:
the sp flash waitin whit botton dowload PRESSED , i connect the phone WHIT OUT PRESING ANY KEY. And there you are , the phone conected …. 1,2, seconds , disconected , and again the phone conected , 1,2.3 seconds and disconected again. And so on. It dosnt work.
I dont know , how to reinstall the android os 7 ,
Someone out there knows how to unbrick my moto c?
Thank you xda fórum for the help and comments.
pics and video of the phone
ibb.co/hPK8Gw
ibb.co/eSYeOb
ibb.co/dudPpG
video of error
youtube.com/watch?v=BgW77Ke1rUI
Related
Hey,
I have been years just reading these forums but never made any posts, so thats why I cannot post to development section anyways. I happened to totally brick my phone by flashing wrong preloader into it. However this morning i succesfully reflashed it and now I have somehow working phone (just need to find new rom now) but anyways. This thread is to help other people who has semi bricked their phones as well.
Current situation.
-Phone doesn't charge,
-Phone doesn't turn on (nothing happens)
-Computer sees phone for few secs, so you have "META mode" access. If your computer doesn't see your phone at all make modified USB connect the 4pin to ground. This is what I did actually. If that doesn't work you can google for test points.
My device:
MTK6575 (Fake mt6589)
512MT RAM (fake 2GB)
800x460 resolution (fake 1920x1080)
4GB internal memory (fake 8gb)
5" screen
2200mah battery (fake 3000mah)
OK this is the prodecure that got my phone back to live!
Install windows XP (Yes, windows 8 didn't work for me. most likely drivers are not ready for it. I will not write steps how to install windows xp)
Install USB deview
-Google it, download it, extract package and run it
-Remove all drivers related to Mediatek, android, usb vcom etc.
Download and install VCOM USB Drivers
-Download these drivers http://www.mediafire.com/download/31nddwqdot5ajp2/MT6575+USB+VCOM+drivers.zip
-Put your phone battery in (50% charge) required. wait 10s. Take battery off and connect your phone to PC as meta mode ( modified USB cable, VOL+/- while connecting, you can read more about this from here: http://forum.xda-developers.com/showthread.php?t=1943442
-When your phone is connected it will disconnect after ~3-5seconds. Now you have to wait in device manager connect the phone right click the device when it shows up. Install driver from the location where you unpacked your VCOM USB drivers/2K_XP_COM/ dont automaticly install them but manually. After windows have found drivers UNTICK show compatible devices. And MANUALLY select preloader driver. Now it will install it the next time the device connects. OK now we have Preloader driver in place. Notice that we will install one more driver later needed in flashing procedure. Disconnect phone.
Now download compatible rom. for me My backup was not working, but this rom worked out perfectly:
http://search.4shared.com/postDownload/wILsUT7J/MTK6575_S4_FLASH_TOOLS_YEDEK.html
Download SP Flash Tool v3.1222.00, extract it.
Ok lets recap what we have now:
-preloader drivers
-phone disconnected
-SP Flash Tool v3.1222.00
-back up we can use to flash
Open flash tool, enter scatter file and go to Format
-Select Format whole flash except bootloader and nvram bin region. -> connect phone -> succeed
-Select Format NVRAM bin region ONLY -> connect phone -> succeed
-Select Format whole flash -> connect phone -> succeed
Ok. Next we need to flash compatible rom this part is tricky. Read before doing anything.
-Disconnect your phone, enter battery (50% charge required)
-wait atlaest 15seconds, and remove battery
-(I dont know why those steps were required, but didn't work without it)
-Open SP Flash tool select scatter file and select all checkboxes
-press download
-connect your phone in META mode with Preloader drivers we installed before.
-Now red prograss bar will start going and phone will disconnect After it reconnect We want ANOTHER drivers are located in the same place but now we need to select Mediatek DA Vcom USB drivers. If everything went fine you get yellow progress bar and it will reflash your phone! :victory:
In the last part if you got Error 5054, This is good. It means your phone is still alive! but your current preloader does not match the data you are going to flash. So you need to go back to google and download other rom try flashing everything (thats what I did, before hitting jack pot, eventually you will find compatible rom)
If you got ERROR 3002 switch back to SP Flash Tool v3.1222.00 newer one doesn't work!
I got some other errors as well when flashing and I solved them but didn't write down the errors so I cant remember them sorry
Remember before connect phone as META mode. Plug in battery with atlaest 50% power wait 15s. remove it. and connect the phone to PC. This was the mysterious step I was missing when struggling with this 5 days!
By the time of writing this article I got my phone working rom, everything works.
GOOD LUCK
ps. Sorry for typos.
:angel: kthxbai
thanks!
AND THANKS FOR yuweng and rui1 who made this all possible!
anyway now I'm back to porting CM to our device. hopefully this helped somebody (and yes, I will be more careful this time)
Hi, it worked for me and i could unbrick my mtk6575
Hi, there
rom given in post worked for me
and i could finally unbrick my phone, but now it asks for the password to decrypt storage after boot. I don't know what to do.
please provide password or any solution to it.
my device is stuck on boot?
Havunen said:
Hey,
I have been years just reading these forums but never made any posts, so thats why I cannot post to development section anyways. I happened to totally brick my phone by flashing wrong preloader into it. However this morning i succesfully reflashed it and now I have somehow working phone (just need to find new rom now) but anyways. This thread is to help other people who has semi bricked their phones as well.
Current situation.
-Phone doesn't charge,
-Phone doesn't turn on (nothing happens)
-Computer sees phone for few secs, so you have "META mode" access. If your computer doesn't see your phone at all make modified USB connect the 4pin to ground. This is what I did actually. If that doesn't work you can google for test points.
My device:
MTK6575 (Fake mt6589)
512MT RAM (fake 2GB)
800x460 resolution (fake 1920x1080)
4GB internal memory (fake 8gb)
5" screen
2200mah battery (fake 3000mah)
OK this is the prodecure that got my phone back to live!
Install windows XP (Yes, windows 8 didn't work for me. most likely drivers are not ready for it. I will not write steps how to install windows xp)
Install USB deview
-Google it, download it, extract package and run it
-Remove all drivers related to Mediatek, android, usb vcom etc.
Download and install VCOM USB Drivers
-Download these drivers http://www.mediafire.com/download/31nddwqdot5ajp2/MT6575+USB+VCOM+drivers.zip
-Put your phone battery in (50% charge) required. wait 10s. Take battery off and connect your phone to PC as meta mode ( modified USB cable, VOL+/- while connecting, you can read more about this from here: http://forum.xda-developers.com/showthread.php?t=1943442
-When your phone is connected it will disconnect after ~3-5seconds. Now you have to wait in device manager connect the phone right click the device when it shows up. Install driver from the location where you unpacked your VCOM USB drivers/2K_XP_COM/ dont automaticly install them but manually. After windows have found drivers UNTICK show compatible devices. And MANUALLY select preloader driver. Now it will install it the next time the device connects. OK now we have Preloader driver in place. Notice that we will install one more driver later needed in flashing procedure. Disconnect phone.
Now download compatible rom. for me My backup was not working, but this rom worked out perfectly:
http://search.4shared.com/postDownload/wILsUT7J/MTK6575_S4_FLASH_TOOLS_YEDEK.html
Download SP Flash Tool v3.1222.00, extract it.
Ok lets recap what we have now:
-preloader drivers
-phone disconnected
-SP Flash Tool v3.1222.00
-back up we can use to flash
Open flash tool, enter scatter file and go to Format
-Select Format whole flash except bootloader and nvram bin region. -> connect phone -> succeed
-Select Format NVRAM bin region ONLY -> connect phone -> succeed
-Select Format whole flash -> connect phone -> succeed
Ok. Next we need to flash compatible rom this part is tricky. Read before doing anything.
-Disconnect your phone, enter battery (50% charge required)
-wait atlaest 15seconds, and remove battery
-(I dont know why those steps were required, but didn't work without it)
-Open SP Flash tool select scatter file and select all checkboxes
-press download
-connect your phone in META mode with Preloader drivers we installed before.
-Now red prograss bar will start going and phone will disconnect After it reconnect We want ANOTHER drivers are located in the same place but now we need to select Mediatek DA Vcom USB drivers. If everything went fine you get yellow progress bar and it will reflash your phone! :victory:
In the last part if you got Error 5054, This is good. It means your phone is still alive! but your current preloader does not match the data you are going to flash. So you need to go back to google and download other rom try flashing everything (thats what I did, before hitting jack pot, eventually you will find compatible rom)
If you got ERROR 3002 switch back to SP Flash Tool v3.1222.00 newer one doesn't work!
I got some other errors as well when flashing and I solved them but didn't write down the errors so I cant remember them sorry
Remember before connect phone as META mode. Plug in battery with atlaest 50% power wait 15s. remove it. and connect the phone to PC. This was the mysterious step I was missing when struggling with this 5 days!
By the time of writing this article I got my phone working rom, everything works.
GOOD LUCK
ps. Sorry for typos.
:angel: kthxbai
Click to expand...
Click to collapse
my rooted mt6575(spice mi-315) device stuck on boot logo. i also tried clar cache and wipe all data bt still same boot logo appear . i am going to ur theard when i format whole flash except bootloader and navram. and connect my device to pc and error occured.....
does some know where to find a latest rom for my mtk 6575(samsung glx,y grand duo hard copy) plz i really need 1
google play service was not working so i uninstalled it to intall a proper vrsion but when i try install it from google play store it says imcompatible with same shared id what can i do plz hlp me coz some of my apps and game r not working...
gapps and cwm problems
soulindub said:
google play service was not working so i uninstalled it to intall a proper vrsion but when i try install it from google play store it says imcompatible with same shared id what can i do plz hlp me coz some of my apps and game r not working...
Click to expand...
Click to collapse
Quote:
Originally Posted by Snekhers
I need this informations roms!
Screen : 540x960
BB Chip : MT6577
Ms Board : Glaxy S3
IMEI1 : XXXXXX
IMEI2: XXXXXX
Modem Ver. : MAUI.11AMD.W11.50.SP.V12. 2012/09/20 18:56
Bar code : 030801050804260123456788.81_20390210
Build Time : 2012 10 17 15:02:47 CST
UBoot Ver. : 2010.06
Kernel Ver. : 4.1.1
SW Ver. : ALPS.ICS.MP.V2.6
Custom Build Verno. : 005121017
hi, a have same phone and is it possible update new rom? Why? Because thşs rom very stable but one except, google contacts cant sync.
And i m trying cwm install with MTKdroid tools its runing but ONLY ONE TAKE. After the reboot in CWM menu coming orginal factory recovery(yellow simple screen and only have test etc. menus) why? ((
I'm sorry for same questions. But I have your help to unbrick my devices. :crying:
Devices information :
Product Name : MITO
Hardware : MT6577
Model : T720
Build number : GM1502_M17_V1.6
Build date UTC : 20130121-062156
Android v : 4.0.4
Baseband v: GM1502_M17_V1.1, 2013/01/14 16:53
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP Mon Jan 21 14:15:59 CST 2013
RAM : 512 - ROM: 4GB
I do flashing with SP_Flash_Tool_v3.1224.01 for this device . But never successfully processed . Though I have used the stock rom I had a previous backup of the other similar device . When running on a flashing red bar reaches 100 % , always an error with the message : BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) .
I have tried many times some existing solutions in this forum . But still there is no way I can get in to flashing on the device . Here are the steps I did in when flashing with tools :
1 . Turning off and unplugging devices battery (I also have tried to flash with battery but failed)
2 . Plug in USB cable to the devices ( but not to the PC )
3 . Installing the USB VCOM driver for MTK MTK6577
4 . Running SP Flash Tool and enter Scatter File
5 . Click the "Download" button on the SP Flash Tools
6 . Plug in the USB cable from the devices to the computer while pressing the volume up button .
7 . Looking into the computer screen flashing process is happening .
Initially there is a process with a red bar marks . Device driver is detected as well ( seen in the device manager ) . When the bar reaches 100 % in the red , the device is detected by the DA USB VCOM port ( COM 28 ) . But immediately displays an error message BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) and the process of flashing the device failed .
I 've tried to uninstall the drivers from USBDeview tools and also through the Device Manager and then install the driver again . But the result remains the same . Port MTK Preloader was never detected . I tried flashing again with a different usb port results also failed . I use the Windows 8 operating system for flashing . I tried with the Windows XP system too but still failed .
Is there a way to revive my device ? . I really - really need your help .
Thank you for the solution that is given . :angel:
That error because flashing wrong preloader and dsp_bl. You can use preloader and dsp_bl from mito A300. I Successfull solve that error and unbrick my Mito T720.
on windows 8 try to disable driver signature verification,and install again your mtk driver
[HELP] Not fully solved
patenpisan said:
That error because flashing wrong preloader and dsp_bl. You can use preloader and dsp_bl from mito A300. I Successfull solve that error and unbrick my Mito T720.
Click to expand...
Click to collapse
Thank's, I Successfull solve that error and unbrick this device. but i have a new problem. Invalid IMEI and no SIM card detected, and Unknown Baseband. Can u help me to fix it again ?,
sonloy777 said:
Thank's, I Successfull solve that error and unbrick this device. but i have a new problem. Invalid IMEI and no SIM card detected, and Unknown Baseband. Can u help me to fix it again ?,
Click to expand...
Click to collapse
You need correct modem.img from same baseband
hi, i've got the same problem on my elephone p2000. how can i fix the invalid IMEI issue? wich file i need? thanks
hardbricked
Devices information :
Product Name : Micromax canvas fun
Hardware : MT6572
Model : a74
Android v : 4.2.2
Baseband v:
Kernel v : 3.4.5
RAM : 512 - ROM: 4GB
I do flashing with SP_Flash_Tool_v3.1224.01 for this device . But never successfully processed . Though I have used the stock rom I had a previous backup of the other similar device . When running on a flashing red bar reaches 100 % , always an error with the message : BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) .
I have tried many times some existing solutions in this forum . But still there is no way I can get in to flashing on the device . Here are the steps I did in when flashing with tools :
1 . Turning off and unplugging devices battery (I also have tried to flash with battery but failed)
2 . Plug in USB cable to the devices ( but not to the PC )
3 . Installing the USB VCOM driver for MTK MTK6572
4 . Running SP Flash Tool and enter Scatter File
5 . Click the "Download" button on the SP Flash Tools
6 . Plug in the USB cable from the devices to the computer while pressing the volume up button .
7 . Looking into the computer screen flashing process is happening .
Initially there is a process with a red bar marks . Device driver is detected as well ( seen in the device manager ) . When the bar reaches 100 % in the red , the device is detected by the DA USB VCOM port ( COM 28 ) . But immediately displays an error message BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) and the process of flashing the device failed .
I 've tried to uninstall the drivers from USBDeview tools and also through the Device Manager and then install the driver again . But the result remains the same . Port MTK Preloader was never detected . I tried flashing again with a different usb port results also failed . I use the Windows 8 operating system for flashing . I tried with the Windows XP system too but still failed .
Is there a way to revive my device ? . I really - really need your help .
error 5054
hi, same problem as in the previous post
my Orange Yomi/ Alcatel ONE TOUCH Pop C1(4015x) (MT6572) is totaly dead, does not respond to any commands. power + vol up / power + vol down / power + vol up + vol down or others, and not enter into recovery mode / fastboot.
I tried to make flash and stoped during surgery and then dead.
I tried many programs but without any result.
sp tools gives me error 5054.
I have a chance to fix it?
ps : the battery is fully charged and is healt
thanks
sorry for my bad english
allviewA4YOU said:
hi, same problem as in the previous post
my Orange Yomi/ Alcatel ONE TOUCH Pop C1(4015x) (MT6572) is totaly dead, does not respond to any commands. power + vol up / power + vol down / power + vol up + vol down or others, and not enter into recovery mode / fastboot.
I tried to make flash and stoped during surgery and then dead.
I tried many programs but without any result.
sp tools gives me error 5054.
I have a chance to fix it?
ps : the battery is fully charged and is healt
thanks
sorry for my bad english
Click to expand...
Click to collapse
Did you solve it? I have the same issue but different device.
Thanks.
allviewA4YOU said:
hi, same problem as in the previous post
my Orange Yomi/ Alcatel ONE TOUCH Pop C1(4015x) (MT6572) is totaly dead, does not respond to any commands. power + vol up / power + vol down / power + vol up + vol down or others, and not enter into recovery mode / fastboot.
I tried to make flash and stoped during surgery and then dead.
I tried many programs but without any result.
sp tools gives me error 5054.
I have a chance to fix it?
ps : the battery is fully charged and is healt
thanks
sorry for my bad english
Click to expand...
Click to collapse
my phone ecoo e04 it's dead
when i flashing itstop 100% red line
and no competet
error 5054
please help me
please i have the same problem with my viwa max . i made a scatter file using mtk droid tools and whiles flashing with sp flash tool. the phone went off. now is not booting but when i connect i see com port at device manager.
any help please?
Help me the problem are the brom error s_dl_get_dram_setting_fail ..
I am getting the EXACT same symptoms. My Golden Warrior A806 does not power on with any button combination and does not power on when charging. SP Flash Tool can recognise the phone when I try to flash to it or format it, but when the red bar reaches 100%, SP Flash Tool waits 11 seconds EVERY TIME, then spits out the error code 5054.
I have also the same problem but in Huwaei Ascend G750 - u10 please help
I am facing the similar issue with my unite 2 a 106. Can anyone please give a detailed process to resolve this issue?
I have the same problem with Zte Blade A1 (c880u)
im having the same problem with Cube T8 Plus...
anyone found a solution yet ?
Another dead cell phone
Alcatel PIXI3 4009E
Same Issue here . . .
Cubot Note S - Flash the Phone with SPFlashTool -> TWRP 3.0.2 (as before at same Device) - Get Dram Setting Failed
Thats mean, the flash don't work/start/end or not? . . . but the Phone ist bricked . . . whats that ???
Same Issue now when I want to "format whole flash without bootloader" . . .
no solution until yet
EDIT:
SP_Flash_Tool w/o battery -> MediaTek USB Port (COM19) -> DA Download red until 100% than stop and error
SP_Flash_Tool with battery -> MediaTek DA USB VCOM (Android) (COM20) -> no DA Download / not recognized
. . . what can I do . . . ?
In my case it ist possible, that the ROM is wrong
masichka05 (forum . cubot . net)
There were phones with another PMT !!!
Now there are 3 types
1.EMMC_PART_USER Size = 0x00000003ae300000(14910MB)
2.EMMC_PART_USER Size = 0x00000003ab400000(15028MB)
3.EMMC_PART_USER Size = 0x00000003ab800000(15032MB)
Where a new firmware for the new layout? Our phones do not work after flash ... ROM
Click to expand...
Click to collapse
How can I check witch "EMMC_PART_USER Size" my device has ?
[HELP] Bootloop after flashing: recovery-clockwork-6.0.3.1-p4.zip -> NOOB!!!!
I`ve just tried everything related to this issue on this forum!!
Before the bootloop i had access to the adb and fastboot features by usb debbugging (sdk manager) and stock recovery, etc...
With the Bootloop, now i can´t access to the stock recovery with the 1001 combinations of the buttons, removing the battery, pressing the volume button and then connect to the pc via usb, adb reboot, and so on and so on.... nothing works!!
The pc only recognizes via usb the Tab (1 second) asking for MT65xxPreloader, like a bootlooping asking for this controller. I´ve installed this controller and the bootloop remains - 1 second each boot...
Anyone can help me to solve this dead brick? Is is not possible make a startup disk via sd card like exists for windows, for example??
Without PC connection i don't see the solution.....
Thanks in advance!!
You will need to use mtk software to enter meta mode.
Sent from my A1-810 using XDA Premium HD app
KieranFoot said:
You will need to use mtk software to enter meta mode.
Sent from my A1-810 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for your answer!
My device can´t still enable to enter in meta mode. I tried MT6573, MT6577, MT6589 VCom driver, the SP Flash tool doesn´t locate the DA path for the function download scatter loading file.....
I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=2206421&nocache=1, for windows Vista. It seems the controller is installed, but the SP flash tool or MTK tool doesn´t recognize my iconia A1-810.... I loaded the *.txt file: MT6577_Android_scatter_emmc.txt and marked all options ans appears a error: FLASHTOOL ERROR: S_FTHND_FILE-IS-NOT-LOADED-YET (5007)
I disconected the battery and when i connect usb to pc the driver apppear for 1 second with the Mediatek Preloader vcom controller and enter in loop again... appear and disappear on the PC Device Manager.....
I´m completely lost.. can you suggest something?
Thanks
flashtool error image attached
check it maybe will help, good luck !
I bought my Acer A1-810 it’s 2,5 months (from amazon). And few days ago I decided to root it. 1 hour later i realized that was not a really good idea, because i did not know much things about, and it was not as easy as I thought. and voila as a result : bootloop !
I tried different roms, different update.zips but got allways the same error : ” check.partition.size=[__PROP_UNDEFINED__] ”
I was desperate…I was at the point of resend it to Acer for repair. But last try was successful, I did it, I did !!! And there is how !
1. go to acer web page --->support--->drivers and manuels
2. choose your model acer a1-810
3. As my divece was bought in usa, my FW upgrade is AV052.RV26RC06.PA.CUS1 (in O.S ), download it !
4.when it’s done, you should unzip and should get update.zip separately.
5. Put update.zip on SD card
6.Put SD card in your device.
For next steps see the manuel of update
Please, My Device Xperia U , stuck at sony logo , because I do not accidentally wipe all in TWRP including data and systems , so my hp no OS installed , plus my device is not detected by the PC , " USB Not Regocnize " and I confused what to do . not detected by flashtool also , what should I do ... :crying:
Did u clear SD card also ?,,,,,
in flashtool there is driver folder ,,, install driver for u xperia u and fastboot and flashboot also and try ,,,,,
hey guys
after flashing wrong preloader my phone do not boot, do not charge and do not show any sign.... I have a back up but I can't flash it again... sp tool do not detect it...
how can I get into meta mode for my phone??
and what should I do to fix it?
jamegreat said:
hey guys
after flashing wrong preloader my phone do not boot, do not charge and do not show any sign.... I have a back up but I can't flash it again... sp tool do not detect it...
how can I get into meta mode for my phone??
and what should I do to fix it?
Click to expand...
Click to collapse
Just flash stock firmware with Sp-flashtools Download
1- Install mt65xx adb drivers
2- Connect your device to your pc
3- Load scatter file and click download in sp-flashtools
4- Remove battery then insert it again
Wait until it's done and turn in your phone (the first boot will be slow 2-5 min)
preloader
hi
i have same phone . lenovo a319 d ram fail error . please share ur backup or preloader with me:crying. please:crying:
Same here. I flashed with that ROM what was in 2 comments before, and now my phone is dead. Every time I've got this BROM error.