I have a Archos 101 G9 and a few weeks ago the charing port started getting loose. Two days ago the metal sleeve completed disconnected from the unit and although is still inside the port, I am not able to charge the unit. Its out of warranty and I cannot afford (or justify the $100+) necessary to have Archos fix it. I was wondering...can the unit be charged using a USB cable connected from the 3G port to my computer? Or how easy would it be to reattach the metal sleeve back where it belongs? I'm OK with opening up the back of the unit, especially since its basically a "brick" now but how easy is it to reattach the charger sleeve?
Any help would be most appreciated. I tried looking for a previous post RE this issue but could not find it.
Thanks
Is your problem fixed ?
You can buy and braze new port. I haven't other ways.
I've ordered the Z2 and it should be coming to my door any day now. When I realized that a magnetic charger might be a good idea to prevent wear of the microUSB port I started to look at the options available. Unfortunately the charging dock sold by Sony is too expensive in my opinion and I would like to find an off-brand alternative. I've looked through the posts on this forum and have come to understand that putting the charger in the wrong direction could be a big mistake. I'm still willing to buy just a cable but would prefer a dock to help prevent this.
My questions is does anyone have a suggestion for a dock(preferable) / cable?
I found this cable on amazon:
http://www.amazon.ca/gp/product/B00...pf_rd_t=101&pf_rd_p=1947489602&pf_rd_i=915398
PS: A lot of docks on amazon have some bad reviews and I'm wary of buying them
I was in the same boat. The Sony dock looks nice like but it was fairly expensive.
I just ordered this last week:
http://www.amazon.ca/Magnector-Perf..._1_2?s=wireless&ie=UTF8&qid=1421124799&sr=1-2
I've got genuine Sony and this one as well. Sony charger is cut more precisely, phone is held exactly as it should with no wiggle etc. But this alone doesn't justify 10 times higher price. The cheapo one does the job in the same way, I see no difference in charging speed. For example this cable is OK as well. If you don't mind waiting for delivery (it takes about 4 weeks to Europe), I can only recommend these products and Aliexpress site.
Regarding the cables with LED indicator - I've got one and even if it's interesting I don't find it useful. LED light is always on and when it reaches ~95% battery threshold it starts to flicker until fully charged, then the color changes to solid again.
Is it hard to screw up the direction of the charger? I've heard it will completely discharge the battery (It shorts the terminals?)
Also, is there a thin case that has a slot for the magnetic charging / what cases do you use if any?
Thanks for the info guys!
Theoretically the plastic around the terminals should prevent the connector from actually connecting "the wrong way" but in practice it can still happen, especially if you insist in moving and pushing the cable.
If the cable is coming out from "the middle" of the connector is easier to put it wrong (otherwise is easy to remember the cable has to go from the middle of the phone to the bottom so is much harder to make the mistake). However because the phone is so symetric you might confuse the front with the back and put it in reverse even in the docking station.
And last but not least make sure you have good warranty - it is possible that the magnet will "suck out" the connector from the phone, mine is barely hanging and is supposed to be from the batch that fixed this issue.
I have the original Sony dock as well as a third party dock. I also have a magnetic adapter for micro USB. All are working fine. Here are the links:
Third party dock - this works fine with my Z2 even though the title says Z3.
Micro USB adapter
Thanks for the reply unni_kmr, unfortunately I'm in Canada and I can't order through amazon.com easily. (Also that isn't on amazon.ca)
Anyone have input on whether I should get this dock for $15?
http://www.amazon.ca/Patec®-Magneti...=UTF8&qid=1421438530&sr=1-15&keywords=z2+case
Also, I'm looking for a case that's slim but doesn't impede the magnetic charging port. Any suggestions?
EDIT: Found this case, might try to cut a charging hole myself
http://www.amazon.ca/Xcessor-Vapour...id=1421440356&sr=8-2&keywords=z2+case+xcessor
WGuitar said:
Also, I'm looking for a case that's slim but doesn't impede the magnetic charging port. Any suggestions?
Click to expand...
Click to collapse
I don't have a case. I am using the Mocolo tempered glass on front and back. I bought it from here. Its very thin glass. Even with it on the front and back, the phone slides into the docks easily.
slow charging speed
hi there, i recently updated my Z2 , to 4.4.4 and everything is absolutely as expected but magnetic charging speed has taken a serious blow. with 4.4.2 it was as fast as normal cable charging but now with 4.4.4 it has become extremely slow , almost takes 8 minutes to charge 1%, and more than 8-9 hrs to fully charge ..
anyone else facing a similar issue .....kindly suggest solutions.:crying:
thanks
WGuitar said:
I've ordered the Z2 and it should be coming to my door any day now. When I realized that a magnetic charger might be a good idea to prevent wear of the microUSB port I started to look at the options available. Unfortunately the charging dock sold by Sony is too expensive in my opinion and I would like to find an off-brand alternative. I've looked through the posts on this forum and have come to understand that putting the charger in the wrong direction could be a big mistake. I'm still willing to buy just a cable but would prefer a dock to help prevent this.
My questions is does anyone have a suggestion for a dock(preferable) / cable?
I found this cable on amazon:
http://www.amazon.ca/gp/product/B00...pf_rd_t=101&pf_rd_p=1947489602&pf_rd_i=915398
PS: A lot of docks on amazon have some bad reviews and I'm wary of buying them
Click to expand...
Click to collapse
What do you mean by putting the charger in the wrong direction could be bad. Do you mean the magnetic charger can only work in one specific direction?
y300owner said:
What do you mean by putting the charger in the wrong direction could be bad. Do you mean the magnetic charger can only work in one specific direction?
Click to expand...
Click to collapse
Not only it can work in only one direction but even worse if you manage to make it connect in reverse it might break the phone or the battery. Yay Sony!
d210 said:
Not only it can work in only one direction but even worse if you manage to make it connect in reverse it might break the phone or the battery. Yay Sony!
Click to expand...
Click to collapse
I use a "magnetron" cable for several moths now and never had any issues with it.
It is not possible to connect it in the wrong orientation.
I'm really happy with it and would absolutely buy it again.
kuhno said:
I use a "magnetron" cable for several moths now and never had any issues with it.
It is not possible to connect it in the wrong orientation.
I'm really happy with it and would absolutely buy it again.
Click to expand...
Click to collapse
Very expensive cable though...
And if you wiggle it a bit I'm sure you can make contact with it even in reverse. I assume it is using like any other cable the normal "mechanical protection" which consists in a tiny (fraction of a mm) extra plastic on the "lower" pin from magnetic connector.
Hello,
I have since this weekend that my Xperia S tablet won't charge.
First I thought it was the cable, however on inspecting the connector of the tablet I saw the following (sorry not a complete sharp image, see attachment).
Look like some pins are bent or not ?
If so, is it possible to replace that on my on (by buying on Ebay, however I could not find any connector. Only the cables)
I use the DK30 charging dock and occasionally a usb magnetic charging cable. Actually I haven't opened the USB for a couple of months now. However, today I was surprised to see that the magnetic connector from the phone was left in the dock
Has anyone had a similar issue and how you fix it? My ZU is still under warranty, however in another country. I'm considering gluing it back in with something, but I'm unsure whether it would be sufficient for the waterproofing.
I searched around a little, and it looks like you're not the only one facing this issue. The Z2 and the Z3C users have also reported that the magnetic connector falls off. Here's a thread about the Z2's issues. One user managed to fix it himself though by, and I quote:
Here's what I did with mine.
All I did was I got a AAA battery and used the + end of the battery and forced it in real hard. Now it won't come out. Even with the very stong magtron magnet. It must have clipped back into place when I forced it in.
Also my phone is waterproof again as I tested it by dunking it in a bowl of water.
Might not work with everyone but worked for me.
Click to expand...
Click to collapse
You could try that, and if it doesn't work, then you could possibly glue it back on. What country are you currently in, and where did you buy it from?
Hello, first of all apologize for my English.
My Xperia Z2 has problems with the USB connector, I know you have some reports of this, but I think I have not found any solution yet. He is almost 3 years old, I think it is normal to present problems, but I still do not want to change my cell phone.
I am having serious problems trying to connect it with the charger via usb, I have to wrap the cable around the device, pull to see if I find a way to connect it, when it connects and starts charging, after a while it starts to hurt Contact again.
When I bought the phone, I used a magnetic charger, but because it was not original cables, it went wrong and I decided to use it for the same cable. I saw that some problems occur because of connecting the magnetic to the opposite, but it has almost 2 years that I do not use and the cell phone always charged normally.
Any solution?
Hey,
I started to have the same issue until it stopped altogether. I had to disassemble my phone last week to fit a replacement LCD and digitizer, and noted that my USB connector had actually snapped off from the logic board!
~TL/DR~ The simple solution is to make use of the magnetic charger. You can get the official charging dock or cables. Both are cheap enough, easy to use and charge the device rapidly.
Alex