When I was in cwm i pressed power off in it and it f***ed up ny tablet when i try to get into fastboot i get a usb symbol but when i plug it in when its off i get the battery question mark adb is reconized but its not its reconizing my device but adb tools and my kit batch will not work any ideas on how to fix this
Bren123 said:
When I was in cwm i pressed power off in it and it f***ed up ny tablet when i try to get into fastboot i get a usb symbol but when i plug it in when its off i get the battery question mark adb is reconized but its not its reconizing my device but adb tools and my kit batch will not work any ideas on how to fix this
Click to expand...
Click to collapse
check this URL, on PDF of instructions
opensource.dell.com/releases/Venue_8_3830_CloverTrail_plus/developer-edition/
Related
ok so i plugged my phone into my computer in fastboot and instead of the qualcomm hd-usb drivers it changed to android adb interface why is this help please!!!!
adb is like bios so as the phone can see this via you accessing fastboot it thinks you might want to alter someting so it calls up for adb drivers so it can allow you to write. Qualcomm drivers would only apper if you need to restore something via the processor chip (QDL tool for example). If you want Qualcomm drivers to appear hold vol up and insert usb and should prompt for something like Qualcomm USB Diagnostic 9002.
passion8059 said:
adb is like bios so as the phone can see this via you accessing fastboot it thinks you might want to alter someting so it calls up for adb drivers so it can allow you to write. Qualcomm drivers would only apper if you need to restore something via the processor chip (QDL tool for example). If you want Qualcomm drivers to appear hold vol up and insert usb and should prompt for something like Qualcomm USB Diagnostic 9002.
Click to expand...
Click to collapse
im tryin to run the qtl tool my phone is well semi bricked...i can get into fastboot and recovery but i keep gettin loops and lock ups...fc's and freezing...ive tried 351,345, 1.9 streakdroid and i keep get the same problems...
what happens when u have qdl running and do vol up and insert usb?
passion8059 said:
what happens when u have qdl running and do vol up and insert usb?
Click to expand...
Click to collapse
that worked lets see how my phone likes this
passion8059 said:
what happens when u have qdl running and do vol up and insert usb?
Click to expand...
Click to collapse
everytime i try to go on the browser it restarts my phone
I have a noname chinese made Rockchip 2918 based tablet PC that I am trying to root so I can use some tools to increase performance/etc.
I have ADB and the Android SDK installed.
I have the most recent Rockchip drivers installed.
I have Development Mode turned on on the tablet.
When I plug the device into USB, nothing happens other then the windows notification sound to let me know something was plugged in. No "searching for drivers" nothing. When I go to ADB and do a "ADB Shell" command, it says device not found.
If I boot the tablet into Recovery mode, connect USB, and repeat the above procedure, I get the same result.
Is there a seperate USB Recovery mode I need to get into? I read about this on other RK2918 based tablets and I have tried all the methods to no avail. Volume up and Power is the only combination that does something, and that just takes me into normal recovery mode.
Just a side note, If I connect my HTC Evo 4G LTE and try the shell command, it finds it instantly.
Any ideas on what I am missing here?
Goanna said:
I have a noname chinese made Rockchip 2918 based tablet PC that I am trying to root so I can use some tools to increase performance/etc.
I have ADB and the Android SDK installed.
I have the most recent Rockchip drivers installed.
I have Development Mode turned on on the tablet.
When I plug the device into USB, nothing happens other then the windows notification sound to let me know something was plugged in. No "searching for drivers" nothing. When I go to ADB and do a "ADB Shell" command, it says device not found.
If I boot the tablet into Recovery mode, connect USB, and repeat the above procedure, I get the same result.
Is there a seperate USB Recovery mode I need to get into? I read about this on other RK2918 based tablets and I have tried all the methods to no avail. Volume up and Power is the only combination that does something, and that just takes me into normal recovery mode.
Just a side note, If I connect my HTC Evo 4G LTE and try the shell command, it finds it instantly.
Any ideas on what I am missing here?
Click to expand...
Click to collapse
Go to my post http://forum.xda-developers.com/showthread.php?t=2362844 use this tool to root the device then use adb wifi. Is the only method to have adb on those rockchip devices without disassambling them. Do not worry the CWM is for all RK2918 devices.
My phone is royally stuffed now. A few days ago, it started showing error message (image) and this morning after a restart, its stuck at the green android logo and won't get into the operating system. I tried the following and didn't work:
- remove sd card, battery both sim cards
- press vol+ and insert into my computer's usb slot
- MT65xx preloader appeared briefly (about 3 secs) in Device Manager and disappear. Too brief for me to do anything
I also tried power and vol+ buttons to get into recovery but I only get a dead Android image with "No Command" message (similar to image).
Before this problem, my computer can connect to my phone fine and I am using ADB_usb_driver_120827 and successfully rooted it about 2 months ago.
I can try something if my computer can hold the USB connection but how to get a USB connection? Please help?
OK my computer can see my phone as an ADB Interface but I still can't connect MTK Tools or SP Flash to it. Any help?
dreamerman said:
OK my computer can see my phone as an ADB Interface but I still can't connect MTK Tools or SP Flash to it. Any help?
Click to expand...
Click to collapse
Connect to the same port you used for root....
Hold only vol up (may be down)
Reinstall drivers....
Follow more methods @ unbrick mt 6577 it may help....
Sent from my IRIS_501 using xda premium
akash akya said:
Connect to the same port you used for root....
Hold only vol up (may be down)
Reinstall drivers....
Follow more methods @ unbrick mt 6577 it may help....
Click to expand...
Click to collapse
Thanks for your help. I fixed it by entering into recovery mode and factory reset it.
Hello!
I was trying to downgrade a Moto E XT1021 and I don't remember how but I ended with the phone stucked in the "bootloader unlocked" screen.
Tried to access the phone on the fastboot flash mode and I can get into the mode by pushing volume down and power on for a few seconds. The problem is that I'm not able to send command to the phone because adb or fastboot doesn't detect it.
The USB cable seems to be working because on the phone screen you can read USB connected and USB disconnected every time I connect or disconnect the cable.
My guess is that there's a problem with the drivers, I've tried everything, of course installing the MotorolaDeviceManager_2.5.4.exe was the first step and then I ended up trying adb-setup-1.4.3.exe and also adb-setup-1..3.exe with no luck. I'm using Windows 7 professional 64 bits.
Right now phone driver says: Android Composite ADB interface.
Hardware ID is USB\VID_22B8&PID_2E80
If I remove the driver the device with no driver says "fastboot condor S"
I want to install 4.4.4 on that phone.
What can I do?
Thanks!
I solved it
Close the thread please.
provide the solution
draxofavalon said:
I solved it
Close the thread please.
Click to expand...
Click to collapse
at least provide the solution if anyone comes wandering again with the same problem
I really don't know why it worked, but I had several folders with adb, fastboot and firmwares and ona of the folders with fastboot detected the phone, I tried the other folder and that version of fastboot didn't detected the device; really weird.
Same software, same dll's but in different hard drives, the one on the C drive worked and the one in the D drive didn't detect the phone.
As I said, really weird.
Hello (i know my english is terrible but i need help)
i have bought not long ago BV6000 and i use format option in SPflash tool (not exept bootloader, i pick format all). After this phone is dead. No respond for charging, not respond when i connect him to computer. When i connect phone to computer and push volume + button computer start see phone for 1 second, then again he disappear for +-5 second and next time he start seen and again, again....
Is any method to bring back to life this phone or only producer can help me?
When i format phone i lost IMEI numbers or IMEI should be still saved in phone?
Emik3 said:
Hello (i know my english is terrible but i need help)
i have bought not long ago BV6000 and i use format option in SPflash tool (not exept bootloader, i pick format all). After this phone is dead. No respond for charging, not respond when i connect him to computer. When i connect phone to computer and push volume + button computer start see phone for 1 second, then again he disappear for +-5 second and next time he start seen and again, again....
Is any method to bring back to life this phone or only producer can help me?
When i format phone i lost IMEI numbers or IMEI should be still saved in phone?
Click to expand...
Click to collapse
When you do the volume up thing, in fastboot, do you see your device?
RAZERZDAHACKER said:
When you do the volume up thing, in fastboot, do you see your device?
Click to expand...
Click to collapse
Yes computer see my device but only for 1 second. When i hold volume up all time computer see my device for +-1 second and then my device disappear for +-5 second and then again from begining 1 second see......
When i push volume + for short time, computer see device for 1 second and then device disappear.
And when i try flash my phone by using SPflash tool, proces start and get error at start cause device disappear.
This phone have Android Marshallow.
Oh i read some topics. When i try run device in fastboot mode the device dont turn on, nothing happend.
Emik3 said:
Yes computer see my device but only for 1 second. When i hold volume up all time computer see my device for +-1 second and then my device disappear for +-5 second and then again from begining 1 second see......
When i push volume + for short time, computer see device for 1 second and then device disappear.
And when i try flash my phone by using SPflash tool, proces start and get error at start cause device disappear.
This phone have Android Marshallow.
Oh i read some topics. When i try run device in fastboot mode the device dont turn on, nothing happend.
Click to expand...
Click to collapse
Alright, with this one second, have the "fastboot reboot-bootlaoder" command ready and then, when it sees it, immediately hit enter. Report results.
RAZERZDAHACKER said:
Alright, with this one second, have the "fastboot reboot-bootlaoder" command ready and then, when it sees it, immediately hit enter. Report results.
Click to expand...
Click to collapse
Dam, i cant add picture.
When i try use this command after installing adb i see in cmd waiting on any device and when i connect phone nothig happend, still waiting.
I will try on another computer. I have computer with windows 10, in cmd i have waiting for device after write "fasttboot reboot-bootloader" command but phone is seen like communication port (com 1). Anyway i have instaled drivers for this phone (for normally working, and they are not drivers for this phone on windows 10)
Before i have pick in SPflash tool:
Format--->auto format flash---->format whole flash
so i think bootloader is formated and he need recover or reinstal
On computer with windows 7 is this same but in device menager he see phone named "MTK USB Port" in cmd after use reboot bootloader command cmd all time waiting for device.
I have installed MediaTek PreLoader USB VCOM Port but device dont use this drivers, when i connect the device use MTK USB Port or is added like new port.
Yup, but i dont want firmware update but i need firmware repair cause i get phone with bugged firmware and factory default settings not help.
Blackview BV6000 Flashing Android 7.0
Follow the link below if you wish to #FLASH your #BLACKVIEW #BV6000 with the latest official #Android 7.0 #NOUGAT firmware..
https://dreamworks75.blogspot.in/2017/08/rom-flashing-guide-blackview-bv6000.html