Related
I am about to get my Tilt 2 and I want to protect it. My first question is: should I get a case and a shield for the screen, or just the GadgetSheilds for my phone?
Secondly, my phone is an American AT&T Tilt 2, what cases are there aside from the Praetorian? I would love to have the Seidio case. If this case won't fit on my phone, are there any that look the same that would?
PS: I did look at the rubberized cases thread, but it kind of confused me. Thank you.
I have the Invisashield full body covering, its tricky to get on exacly right but works great, I also keep the phone in a Monaco Aluminum case there real nice, they come with a removable clip, I have the monaco case on my Tilt Tilt2 Samsung epix and my Microsoft Zune. http://cgi.ebay.com/HTC-AT-T-TILT-2...wItemQQptZPDA_Accessories?hash=item5ad5b16354
Go for a silicone case!
Don't get a hard rubberised one get a soft silicone. The simple rule is that a sharper material will scratch a weaker one.
My $2 dollar hard rubberized case became slightly loose and scratched my new $1000 TP2 to high hell. And I am one of the most careful people about these things.
mech_supernova said:
I have the Invisashield full body covering, its tricky to get on exacly right but works great, I also keep the phone in a Monaco Aluminum case there real nice, they come with a removable clip, I have the monaco case on my Tilt Tilt2 Samsung epix and my Microsoft Zune. http://cgi.ebay.com/HTC-AT-T-TILT-2...wItemQQptZPDA_Accessories?hash=item5ad5b16354
Click to expand...
Click to collapse
I've had them both, and I would recommend Ghost Armor before Zagg Invisashield. That is unless you like a sticky touch screen, a bumpy "orange peel" finish, and a discolored screen.
mech_supernova said:
I have the Invisashield full body covering, its tricky to get on exacly right but works great, I also keep the phone in a Monaco Aluminum case there real nice, they come with a removable clip, I have the monaco case on my Tilt Tilt2 Samsung epix and my Microsoft Zune. http://cgi.ebay.com/HTC-AT-T-TILT-2...wItemQQptZPDA_Accessories?hash=item5ad5b16354
Click to expand...
Click to collapse
I purchased a Monaco Aluminum case and I like the way it looks and feels, but I won't use it. There is no way I'm trusting my $350 phone to that friction clasp. I can just see me wearing the phone on my belt and something catching on the clasp, opening the case and dumping the phone out in a parking lot. The clasp just isn't secure enough for me. Wish I had noticed it before I made the purchase.
Are there any silicon cases? I only know of the Praetorian as far as the ATT Tilt 2 goes.
I received a Clairview screen protector and it is labeled Touch 2 on packaging, Touch 2/Tilt 2 on the receipt, but it definitely doesn't fit right. Anyone else have this problem? Is it just a mistake or do they not make one for the ATT TIlt 2? What's the opinion of Clairview elsewise?
Lastly, what is the best full-body screen protector, do they cover the chrome around the edge, and can you notice they are on at all?
Lots of questions, I know, thanks so much for the input thus far.
DCurry said:
I purchased a Monaco Aluminum case and I like the way it looks and feels, but I won't use it. There is no way I'm trusting my $350 phone to that friction clasp. I can just see me wearing the phone on my belt and something catching on the clasp, opening the case and dumping the phone out in a parking lot. The clasp just isn't secure enough for me. Wish I had noticed it before I made the purchase.
Click to expand...
Click to collapse
Agreed. I had the same style case for the original Tilt, and dumped it out a few times because i was walking and it managed to free itself. I use this one on my Tilt 2, but I don't use the belt clip at all. Just goes straight in the pocket. Besides that, the only thing I can complain about it, is how there really isn't much room to touch on the edges of the screen & the sensor at the top to turn off the screen during a phone call is blocked - but nothing a dremel can't fix!
I bought a bodyglove, nice case, adds a little bulk, but no scratching on the device as others have said.
Reefermattness said:
I've had them both, and I would recommend Ghost Armor before Zagg Invisashield. That is unless you like a sticky touch screen, a bumpy "orange peel" finish, and a discolored screen.
Click to expand...
Click to collapse
You picked up the tmobile gsm version right and do you have the full body?
sanjsrik said:
I bought a bodyglove, nice case, adds a little bulk, but no scratching on the device as others have said.
Click to expand...
Click to collapse
I concur Bodyglove case it's sturdy and well designed. Like he said it hasn't scratch my device. The back cover makes it a thick phone not as thick as having an extended battery with the cover. The screen has a Case-mate protector film it's really good quality. Both my TP2 and it's case are from US Cellular.
I'm looking at an installed Otterbox Defender, and I'm disturbed to see the plastic sheet is cut way too low on the screen, around the earpiece. The shape of the black plastic shell alone is sufficently large enough to clear the sensors/ffc/speaker. There was no need for them to die cut the screen too. This creates a literal pocket for dirt to collect against the screen. Is that how they all are? That's an unforgivable flaw.
-TM
ffolkes said:
I'm looking at an installed Otterbox Defender, and I'm disturbed to see the plastic sheet is cut way too low on the screen, around the earpiece. The shape of the black plastic shell alone is sufficently large enough to clear the sensors/ffc/speaker. There was no need for them to die cut the screen too. This creates a literal pocket for dirt to collect against the screen. Is that how they all are? That's an unforgivable flaw.
-TM
Click to expand...
Click to collapse
Yes sir, the case was designed that way. Returned mine for that reason.
#Winning# said:
Yes sir, the case was designed that way. Returned mine for that reason.
Click to expand...
Click to collapse
What a stunningly foolish design. All the had to do was glue $0.005 worth of thin fabric between the plastic (doesn't matter since the LCD isn't there) and that would protect the entire front, plus the speaker.
I'm thinking of getting some really light fabric, coating it with silicone, and pressing it in place. Shouldn't affect speaker quality, silicone is soft so no chance of glass damage, and it would essentially waterproof (to a degree of course) the entire front.
The commuter screen protector sucks too. It was flawless for the EVO, but doesn't fit the 3d right
It fits my screen just fine.
The only thing that doesn't fit is the top part of the silicone casing. Everything else is super.
kellybrf said:
The commuter screen protector sucks too. It was flawless for the EVO, but doesn't fit the 3d right
Click to expand...
Click to collapse
siraloz said:
It fits my screen just fine.
The only thing that doesn't fit is the top part of the silicone casing. Everything else is super.
Click to expand...
Click to collapse
Hmm...are you sure you're not talking about the Commuter?
Could be worst....the guys over in the sensation forum are crying because otterbox isnt making them a case lol
Sent from my PG86100 using XDA App
ffolkes said:
Hmm...are you sure you're not talking about the Commuter?
Click to expand...
Click to collapse
That would be why he replied to someone elses post about the Commuter
ffolkes said:
I'm looking at an installed Otterbox Defender, and I'm disturbed to see the plastic sheet is cut way too low on the screen, around the earpiece. The shape of the black plastic shell alone is sufficently large enough to clear the sensors/ffc/speaker. There was no need for them to die cut the screen too. This creates a literal pocket for dirt to collect against the screen. Is that how they all are? That's an unforgivable flaw.
-TM
Click to expand...
Click to collapse
Couldn't agree more. I see this as a huge design mistake.
I saw this too, but I really did not think much of it. I guess there is no such thing as a perfect case.
Sent in 3D using my EVO.
Put a full screen protector on it before case and its fine love mine no issues love it no dust issues.
That's the way the case was made no issues.
nebenezer said:
Couldn't agree more. I see this as a huge design mistake.
Click to expand...
Click to collapse
I returned it to Best Buy, and got the Platinum Series - 2-in-1 Covert Convertible Case for HTC (http://www.bestbuy.com/site/Platinu...18353391762&skuId=2809635&st=evo 3d&cp=2&lp=3). I haven't decided if I'm keeping it yet though.
When I returned it, I feared getting a hard time since technically it was open (even there are no seals on the box) but as soon as I briefly showed the guy the top of the case, where it's cut too low, he was absolutely shocked and said "that looks like it was designed to collect grit and be suicide for your screen" and happily exchanged it.
And yeah, you can (and should I guess) use a screen protector too, but it's just so silly for a case that was designed to be the toughest, most rugged thing to have such a glaring vulnerability. I'd rather they addressed that, than put time and effort into putting a plug over something else. I'd rather get my 2D/3D switch dirty if it meant they would have focused more effort on the most important thing - the screen. And given how tightly and accurately the plastic case fits, why did they have to make the hole for the proximity/speaker/ffc so sloppy and loose? They could have cut that thing out with submilimeter accuracy, and it would have fit great, since there is no need for wobble-room/slop when that case otherwise fits so perfectly.
The Defender does feel very nice in hand though, very solid, and I loved the silicone they used. Had a wonderful feel, not the usual tacky silicone you see in "gel" cases or whatever you call them.
ffolkes said:
I returned it to Best Buy, and got the Platinum Series - 2-in-1 Covert Convertible Case for HTC (http://www.bestbuy.com/site/Platinu...18353391762&skuId=2809635&st=evo 3d&cp=2&lp=3). I haven't decided if I'm keeping it yet though.
When I returned it, I feared getting a hard time since technically it was open (even there are no seals on the box) but as soon as I briefly showed the guy the top of the case, where it's cut too low, he was absolutely shocked and said "that looks like it was designed to collect grit and be suicide for your screen" and happily exchanged it.
And yeah, you can (and should I guess) use a screen protector too, but it's just so silly for a case that was designed to be the toughest, most rugged thing to have such a glaring vulnerability. I'd rather they addressed that, than put time and effort into putting a plug over something else. I'd rather get my 2D/3D switch dirty if it meant they would have focused more effort on the most important thing - the screen. And given how tightly and accurately the plastic case fits, why did they have to make the hole for the proximity/speaker/ffc so sloppy and loose? They could have cut that thing out with submilimeter accuracy, and it would have fit great, since there is no need for wobble-room/slop when that case otherwise fits so perfectly.
The Defender does feel very nice in hand though, very solid, and I loved the silicone they used. Had a wonderful feel, not the usual tacky silicone you see in "gel" cases or whatever you call them.
Click to expand...
Click to collapse
I checked the case ur talkin about out felt flimsy compared to the defender also less protection otter box defender takes the cake there. I didn't like the gay flap they had on the convert to cover the camera lens wait for ballistic to.come out with there case if your wanting a tank.
reaper24 said:
I checked the case ur talkin about out felt flimsy compared to the defender also less protection otter box defender takes the cake there. I didn't like the gay flap they had on the convert to cover the camera lens wait for ballistic to.come out with there case if your wanting a tank.
Click to expand...
Click to collapse
Yeah, I agree. But for me, the best case I ever had for my Evo4G was the Seidio Surface (or BB rebranded equivalent). My plan was to get an ultrarugged case for those days I'm working outside in the field (haha, literally) and the Surface for regular daily use. So that's why the Convert case sorta fits both bills. But I agree, for someone that needs extreme protection daily, the Convert isn't as good as others like the Defender.
ffolkes said:
Yeah, I agree. But for me, the best case I ever had for my Evo4G was the Seidio Surface (or BB rebranded equivalent). My plan was to get an ultrarugged case for those days I'm working outside in the field (haha, literally) and the Surface for regular daily use. So that's why the Convert case sorta fits both bills. But I agree, for someone that needs extreme protection daily, the Convert isn't as good as others like the Defender.
Click to expand...
Click to collapse
Hope it works out for u man. I liked the feel of the otter box more then the seidio convert re branded heard some bad things about how flimsy it was checked it out at best buy didn't really seem as sexy as defender . I think ballistic would be good just that thing is a freaking tank. hope u have good luck with finding a case man.
Yeah, I quickly noticed the dust issue there too, but hey, compared to the bubbles that inevitably arise with stick-on screen protectors? I'll take it. I was able to get a swiffer cloth underneath the gap and managed to rid some of the dust that way. The only other option I might consider, if it becomes a real issue later on, is to poke a piece of a feather duster under the protector and gently swab it every so often. FYI- If you use the plastic clip while in your pocket (With the screen facing the backside of the clip), then it won't pick-up that much dust.
Other than the aforementioned, this case is everything I really ever wanted in a protective shell. I love the lens covers, screen protector, double layer of hard/soft protection, and how it fits the device like a glove. I think we can always find an issue with something if we look hard enough, but this thing rocks.
The Dark Knight Patriot said:
Yeah, I quickly noticed the dust issue there too, but hey, compared to the bubbles that inevitably arise with stick-on screen protectors? I'll take it. I was able to get a swiffer cloth underneath the gap and managed to rid some of the dust that way. The only other option I might consider, if it becomes a real issue later on, is to poke a piece of a feather duster under the protector and gently swab it every so often. FYI- If you use the plastic clip while in your pocket (With the screen facing the backside of the clip), then it won't pick-up that much dust.
Other than the aforementioned, this case is everything I really ever wanted in a protective shell. I love the lens covers, screen protector, double layer of hard/soft protection, and how it fits the device like a glove. I think we can always find an issue with something if we look hard enough, but this thing rocks.
Click to expand...
Click to collapse
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150623970249&ssPageName=ADME:X:RTQ:US:1123 put this on before the case and ur good to go no dust works great for me in the garage where I work on the shop floor mechanic
Just get a Zagg and pull the plastic piece off the Otterbox..
Sent from my PG86100 using XDA Premium App
nonpointtruth said:
Just get a Zagg and pull the plastic piece off the Otterbox..
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
LOL if u use zagg don't put to much solution on the protector or u will get water damage on the screen don't know hoe well these screens are sealed og EVO had ****ty glass sealing the screen was never glued all the way around .
I could not find any reviews of this bumper. I was interested in getting it but I wanted to see if anyone had thoughts about it first.
http://www.casefanatic.com/samsung/luphie-metal-bumper-frame-samsung-galaxy-s7-edge/
http://www.aliexpress.com/item/For-...on-Aluminum-Frame-For-Galaxy/32625294136.html
Not for the S7, but I owned one for my Note5 up until last week, and man was it pretty. I got the Gold bumper to go with my White Note5. I also got a leather skin from DBrand and that phone was so pretty. It was nice quality, and I thought it was worth the cost. I purchased it from a stateside seller from Ebay who imported them from China for half the cost of casefanatic.com. The one thing I will caution is that only the very inside of the Luphie case is protected by a small line of foam, not the inside of the sides (if that makes sense). This means that the actual metal bumper of the phone itself will get scratched, metal on metal, leaving small lines all around the phone bumper. Also, my signal was affected just a little. I suppose that's due to the aluminum covering the antennas.
I don't know that I would buy it again, honestly. It did look very nice for sure. But, I think it takes away from the actual day-to-day function of the phone. I hope this helps!
actually, the brand of that bumper is Ginmic, not Luphie. These are 2 factories, design is the same but different logo.
here is the Luphie one. http://www.ipromarket.com/luphie-ra...er-case-for-samsung-galaxy-s7-edge-g9350.html
Quite expensive but damn, so pretty!
I own a silver aluminium Luphie bumper with the black leather backing for my s7. So far I'm pretty happy with it and it's not given me any hassles as of yet. One thing I was surprised by was the fact that the leather backing was not attached to the aluminium frame and was rather a sticky piece of leather that attaches to the rear glass of the phone. Not what I was initially after but it's been alright so far and it's very adhesive so that's good.
Very difficult to line up the leather backing when you first stick it on so take your time and start from the camera side heading down the phone. The backing makes the phone very grippy on surfaces so it's much safer to leave it on tables and stuff but the aluminium sides are a bit slippery and of course the phone feels slightly heavier. It does look aesthetically pleasing though and I can't fault the built in buttons on the Luphie bumper because they are excellent and haven't hampered the phone in any way.
I ordered them off eBay from a Chinese distributor and with post and packaging they came to $12 each.
Any other questions just ask and I will be happy to help..
zimcommando said:
I own a silver aluminium Luphie bumper with the black leather backing for my s7. So far I'm pretty happy with it and it's not given me any hassles as of yet. One thing I was surprised by was the fact that the leather backing was not attached to the aluminium frame and was rather a sticky piece of leather that attaches to the rear glass of the phone. Not what I was initially after but it's been alright so far and it's very adhesive so that's good.
Very difficult to line up the leather backing when you first stick it on so take your time and start from the camera side heading down the phone. The backing makes the phone very grippy on surfaces so it's much safer to leave it on tables and stuff but the aluminium sides are a bit slippery and of course the phone feels slightly heavier. It does look aesthetically pleasing though and I can't fault the built in buttons on the Luphie bumper because they are excellent and haven't hampered the phone in any way.
I ordered them off eBay from a Chinese distributor and with post and packaging they came to $12 each.
Any other questions just ask and I will be happy to help..
Click to expand...
Click to collapse
How was the signal reception? Has it dropped a bit due to the aluminum?
ejsoliveros said:
How was the signal reception? Has it dropped a bit due to the aluminum?
Click to expand...
Click to collapse
The signal reception seemed to stay normal. However the GPS was affected and would drop out every now and then when using google maps, waze etc.
zimcommando said:
The signal reception seemed to stay normal. However the GPS was affected and would drop out every now and then when using google maps, waze etc.
Click to expand...
Click to collapse
When GPS becomes glitchy, what quick fix do you usually do? Has it all been patience or have you discovered any workarounds aside removing the bumper? I could imagine having to switch cases when travelling I would be using a clear bumper case, all else I'd be using Luphie. Just ordered mjne for OnePlus 5t though.
When I realised that it was the case doing it, I was a bit bummed. Eventually I stopped using the case because it was not really simple to remove it each time. The screws make this a slightly more difficult task to do when you need it done on a regular basus. It's a real pity because it's an amazing looking case and I loved the protection it gave. I'm now using an abs plastic/slicon one instead, made by VRS design. No issues with GPS with this one and does the job of protecting everything well enough.
zimcommando said:
When I realised that it was the case doing it, I was a bit bummed. Eventually I stopped using the case because it was not really simple to remove it each time. The screws make this a slightly more difficult task to do when you need it done on a regular basus. It's a real pity because it's an amazing looking case and I loved the protection it gave. I'm now using an abs plastic/slicon one instead, made by VRS design. No issues with GPS with this one and does the job of protecting everything well enough.
Click to expand...
Click to collapse
That eventually would happen to me as well I guess. Still holding off order cancellation though haha! I ordered from Aliexpress and the seller has not shipped the product yet. I'm tempted to cancel but there is really no option of enjoying the feel of a skinned phone and a bumper since RhinoShield is too bulky for me I think and they have not released one for the OnePlus 5t yet.
Disclaimer : I do not benefit in any way for saying anything good or bad about these products. I am giving you guys my honest opinion on these cases to help provide some assistance on buying a case.
Let’s start with the first case I bought from them.
Orzly Flexicase (Clear)
Link to the case: https://www.amazon.co.uk/dp/B072MZCQB6/ref=cm_sw_r_cp_dp_T1_v8mFzb704M66R
Price :£12.99
Things I like: Simple case, adds much need grip to the OnePlus5. Doesn't detract from the overall phones aesthetic or feel. , Good lip around the camera bump and the front.
Things of concern: It's a simple case, it's mainly there to prevent scratches. Not going to protect your phone from anything major
Comments: I really like this case, there is a craft to a making something simple and effective and this is it. No fancy features it just protects your phone from scratches, adds grip and protects from small drops. It doesn't over stay it's welcome and I congratulate on that.
I was happy with my purchase at the price I paid but since it has gone down. I think anyone wanting a simple case you can't really go wrong with this.
Also like to note, I haven't had problems with any holes in the case. Some people on other forums have asked me about the quality of the finish. No evident problems with the finish of my case.
Photos: http://imgur.com/a/c8eOF
Orzly Wallet Case (Black)
Link to the case : https://www.amazon.co.uk/dp/B072QV1VRT/ref=cm_sw_r_cp_dp_T1_qInFzbCVEWP0X
Price: £14.99
Things I like: Protects the screen while it’s closed, Magnet keeps the wallet closed well, Effective card slots and pocket slot, Effective stand, I like the case that holds the phone in the wallet, not too bulky.
Things of concern: It’s a wallet case, people either love them or hate them.
Comments: I had this case for my HTC 10 and they have improved this case immensely. Now having three card slots instead of two allows me to take my bank card, ID and my public transport card without having to double up in the slots (That can create further issues). The main issue with last years was the case that held the phone in place. Last year was a hard shell, now throughout my time working with phones, more than half of wallet cases I have seen have broken inner shells because they use a hard shell inside. This year they have basically taken the great Flexicase design and used it as the holder for the wallet case. That was a great move and make the wallet case great.
For a wallet case, this is a solid wallet case. You can’t really go wrong with it.
Photos: http://imgur.com/a/j1FFv
Orzly Slim Stand Case
Link to the case : https://www.amazon.co.uk/gp/product/B073S7BWQQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Price:£12.99
Things I like: THIS THING IS SLIM, the case itself may be the lowest profile case I have used on the OnePlus5, The stand can withstand a lot, stand can be rotated in different ways.
Things of concern: This case may not work with some in-car phone holders, the stand bulges out and made it hard for my vent holder to hold it.
Comments: I picked up this case because I was intrigued. I didn’t think I would like it but I really did! The case has a really nice soft touch finish and provides protection for the camera bump which is surprising as the case is really low profile , it provides a very small lip on the front so it may or may not protect the phone from if you put your phone screen down. The case doesn’t really take much away from the buttons which is nice.
The ring stand is really handy, A couple of times I’ve used it. I do find myself playing with the ring stand itself and hanging my phone off my finger, the case fits very well I can trust that my phone will stay there hanging. The stand really is quite strong. I can put a lot of force on the stand and it didn’t feel like it would break, (I have posted a video demoing that) The things I would say is that I would like the stand to have different standing points, it would be nice to have the phone to stand at different angles, while this isn’t a major thing, I thought I’d point it out.
I really like this case, nuff said.
Photos: http://imgur.com/a/kHBlm
Video:
Orzly Fusion Case
Link to the case : https://www.amazon.co.uk/gp/product/B072MPYX9Y/ref=od_aui_detailpages00?ie=UTF8&psc=1)
Price: £9.99
Things I like: Not bulky, feels like it would protect the case.
Things of concern: Can’t think of anything…
Comments: This is the case I have on my OnePlus5, I really like it. It’s like the FlexiCase but better. This honestly feels like this case has been designed by someone who’s wanting a make a case for themselves. There is extra grip points around parts of the case which your hand is in contact with. That’s a smart move. There is some little feet on the back around the clear back, this is a expert level move from Orzly, clear plastic scratches easily by doing this the plastic clear back from the ground. The clear back is quite hard and seems like it could withstand a drop, this is the motto of this case: it’s solid.
Photos: http://imgur.com/a/CqoVz
Comments About Orzly
One thing I have noticed is Orzly has revamped their packaging. It’s more like you would see in a shop and has nice little touches to them. Having a little tab to pull to open the box and having nice information (To read on the toilet obviously) adds to the over. Here is some photos : http://imgur.com/a/vZ4eu
Please ask any questions and if this helped someone, if you liked it I may do more.
Thanks so much for this. I agree with the flexicase and slim case, both have been great for me and I have already used the stand on the slim case for a train journey. Worked out great. I am looking forward to receiving my fusion bumper case from the reviews both you and niijonodhg have been giving!
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
abe2912 said:
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
Click to expand...
Click to collapse
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
abe2912 said:
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
Click to expand...
Click to collapse
If it helps, my favourite case so far has been the Fusion!
DarkExistence said:
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
Click to expand...
Click to collapse
Yes you do make it harder ?. I never used cases mainly for protection but more for the extra grip but dropping my OP5 makes me reconsider this. But when I dropped it I didn't have any case installed so it was pretty slippy. Maybe I try both cases as they are not that expensive .
abe2912 said:
Yes you do make it harder ?. I never used cases mainly for protection but more for the extra grip but dropping my OP5 makes me reconsider this. But when I dropped it I didn't have any case installed so it was pretty slippy. Maybe I try both cases as they are not that expensive .
Click to expand...
Click to collapse
Getting both of them might be a good option. My favorite is the fusion but the slim case is really good. The slim case adds grip to the phone without much bulk or extraprotection where as the fusion is really grippy as well as adding more protection.
DarkExistence said:
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
Click to expand...
Click to collapse
Yeah the stand feature for me is a must. Personally I prefer the Wallet Case version, as it's got that extra bit of screen protection with the fordable lid. But they're all nice in different ways.
AnabolicAndroidz said:
Yeah the stand feature for me is a must. Personally I prefer the Wallet Case version, as it's got that extra bit of screen protection with the fordable lid. But they're all nice in different ways.
Click to expand...
Click to collapse
Any stand is nice really, what I like about the slim stand case though is that you can put your finger in the ring and it will mean your phone cant drop, very useful actually
Just received my Orzly Fusion today and have to say: that thing is amazing! Adds minimal bulk but seems to be good protection. And the best thing is that it adds so much grip to the phone and makes it really comfortable to use.
abe2912 said:
Just received my Orzly Fusion today and have to say: that thing is amazing! Adds minimal bulk but seems to be good protection. And the best thing is that it adds so much grip to the phone and makes it really comfortable to use.
Click to expand...
Click to collapse
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
ab7casper said:
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
Click to expand...
Click to collapse
Looks really good with that dbrand skin! Glad to know you had the same sort of material that didn't yellow
ab7casper said:
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
Click to expand...
Click to collapse
That is beautiful!
Finally got my video up:
niijonodhg said:
That is beautiful!
Finally got my video up:
Click to expand...
Click to collapse
Good video, I definitely agree. There's not much else to say about it.... Its a good case. It really compliments the phone.
ab7casper said:
Good video, I definitely agree. There's not much else to say about it.... Its a good case. It really compliments the phone.
Click to expand...
Click to collapse
Thanks!
I am using this case:
https://www.amazon.de/gp/product/B01N9R439E/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Does not fit perfect but it is easy to use.
Does it have bigger size
What is ur size?
I have the 7.2 x 158,3 x 79,6 mm. I think the bigger one can be a complete fit
Have you a Screen protector
Have anyone install the free bumper case they give?
No i didn't installed that bumper case. I don't like the idea of glue anything on device. Imagine u got dust with big obstacles inside the bumper....and u can't remove it to clean it !!! Hell no
True that plus I don't want to make it more thicker when folding lol. How you loving it so far? What you use it for?
indrafendy said:
True that plus I don't want to make it more thicker when folding lol. How you loving it so far? What you use it for?
Click to expand...
Click to collapse
I thought im not gonna like this phone that much... because processor and google services...but damn i was wrong...our gpu (Mali-G76 MP16) running games more better than Adreno 640. (Extremely surprised) I guess its all about optimizations. Using all google services via browser like on any PC !!
I store my phone in sun glasses sleeve pouch lol better than nothing !!
I got a hair line scratch on mine, tiny but finding it hard to protect screen
iantaylor27 said:
I got a hair line scratch on mine, tiny but finding it hard to protect screen
Click to expand...
Click to collapse
It is a plastic screen with a screen protector on it, you will see little bumps and other imperfections. I do not like the case it came with, collects so much dust. I am waiting for the Leather Sleeve which should be here in the next few days, will get you an update on that. I keep my phone in my pocket and on my door panel pocket.
I m using this case. Best protection in my opinion. Search for neoprene universal case on amazon.
I am using it with the bumper case and the Huawei leather pouch together.
The case is conceived to be used without the bumper originally, but you can insert the plastic part of the bumper easily and it fits perfectly. (you can do it also as originally foreseen, so you can charge the phone when in the pouch but the rubber part of the bumper case is more difficult to pull our of the pouch. In any case, you get used to easily and you fill as you can use the phone as your daily driver.
Over the time, it gets even better as the leather pouch gets looser.
I hope it helps.
Best, Andreas,
I got this - fits almost perfect and protects every inch of the phone.
https://www.amazon.com/gp/product/B07YLXCNK3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Case production idea
I am thinking to make my own case.
It will be a slide case with a glass sheet to use the big screen at all times, but you will need to slide the phone out to use the big screen.
I will make use it for a month before the selling point to make sure it really does the job.
I will keep you guys posted once I have made it and share the photos.
tarindersingh100 said:
I am thinking to make my own case.
It will be a slide case with a glass sheet to use the big screen at all times, but you will need to slide the phone out to use the big screen.
I will make use it for a month before the selling point to make sure it really does the job.
I will keep you guys posted once I have made it and share the photos.
Click to expand...
Click to collapse
Have u made the case