[Q] Encryption unsuccessful on droid razr xt912 - Motorola Droid RAZR

I rooted my droid razr xt912 with the kingo root software. I'm kinda new to the developing scene and then I tried to change my ROM with a custom ROM from eclipse with my stock recovery then tried to use a custom bootstrap recovery cleared data partition and erased user data but I think the mistake came from clearing my dalvik cache when I tried installing the ROM it rebooted and will only display "encryption unsuccessful" I tried multiple factory resets but none of them worked and now my phone is stuck like this. Please anybody will a method to solve this please help me!!!!

Hi there,
Please wait until mods will move this thread to the device specific forum.
Stand by

Very unclear
Use paragraphs
And, can you explain again what did you do?
Sent from my XT912

white wine hacker said:
I rooted my droid razr xt912 with the kingo root software. I'm kinda new to the developing scene and then I tried to change my ROM with a custom ROM from eclipse with my stock recovery then tried to use a custom bootstrap recovery cleared data partition and erased user data but I think the mistake came from clearing my dalvik cache when I tried installing the ROM it rebooted and will only display "encryption unsuccessful" I tried multiple factory resets but none of them worked and now my phone is stuck like this. Please anybody will a method to solve this please help me!!!!
Click to expand...
Click to collapse
You need to flash stock firmware with RSD Lite.
Sent from my XT907 using Tapatalk

Any site to teach me how to use rsd lite

white wine hacker said:
Any site to teach me how to use rsd lite
Click to expand...
Click to collapse
See Moto Drivers, RSD Lite, and other Unbricking Tools
http://forum.xda-developers.com/general/rooting-roms/motorola-usb-drivers-rsd-lite-firmware-t3042687
Sent from my XT907 using Tapatalk

Thanks

Specifically http://forum.xda-developers.com/showthread.php?p=59139832
Sent from my XT907 using Tapatalk
---------- Post added at 11:50 AM ---------- Previous post was at 11:46 AM ----------
white wine hacker said:
Thanks
Click to expand...
Click to collapse
You installed safestrap? you are able to get to twrp recovery?
if so which version of twrp 2.2.2.1? safestrap version? 3.70?

Related

Factory Reset on a Rooted Motorola RAZR XT910

Hi guys, I'm a new member of the forums and I'm quite new to smart phones and Android. I tried searching for posted topics but can't seem to find related information on what I'm trying to learn. Lemme go ahead and ask questions:
1. Is it safe to perform a factory reset on a rooted Motorola RAZR XT910? Will it boot up like normal afterwards?
2. If I perform a factory reset, will I have my Motorola RAZR XT910 unrooted?
3. Will factory reset clear data just on the "application" partition on my internal phone storage (8GB) or will it also wipe the data/files saved on the other 8GB?
Thanks.
Im trying to just figure how to do a factory reset??
Sent from my DROID RAZR using xda premium
1. Yes. 2. No. 3. Neither, it will wipe the /data partition, which contains user-installed apps and their data. You will need to wipe the internal storage or SD card manually from Settings/Storage.
Sent from my XT910 using xda premium
aceboogie62 said:
Im trying to just figure how to do a factory reset??
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Menu>settings>privacy.
Sent from my DROID RAZR
evltwn72 said:
Menu>settings>privacy.
Sent from my DROID RAZR
Click to expand...
Click to collapse
whats the difference between doing that and doing poweroff > 3-buttons boot > Moto recovery > factory reset?
R3dbeaver said:
whats the difference between doing that and doing poweroff > 3-buttons boot > Moto recovery > factory reset?
Click to expand...
Click to collapse
Same thing, factory reset on 3 buttons boot use if your razr doesnt boot to home screen
Sent from my XT910 using Tapatalk
elias.parasini said:
Same thing, factory reset on 3 buttons boot use if your razr doesnt boot to home screen
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
thanks!
ps: i'm also Indonesian, just living in Canada
R3dbeaver said:
whats the difference between doing that and doing poweroff > 3-buttons boot > Moto recovery > factory reset?
Click to expand...
Click to collapse
You don't have to power off your phone.
Sent From My Droid RAZR MAXX
I'm just trying to unroot my razor back to factory but theres no method out for Mac user's only Windows which is dumb cause they have a root for mac but not unroot....anyone help?
aceboogie62 said:
I'm just trying to unroot my razor back to factory but theres no method out for Mac user's only Windows which is dumb cause they have a root for mac but not unroot....anyone help?
Click to expand...
Click to collapse
I have a question for you, isn't there a way to run windows on Macs? Like an app or something? Sorry, I don't have a Mac, only a PC. But if you can run a windows program through an app for your Mac, this might help you unroot.
http://rootzwiki.com/topic/4158-rootunroot-droid-bionic/#post98074
I know it says for the Bionic, but I rooted my RAZR MAXX with the motofail method after the latest update, and PetesMotorolaRootTools worked to un-root it. Hope this helps you.
Or if you know someone with a PC, you might try asking them if they will download it.
thanks i'm actually in the process of putting windows on my mbpro
aceboogie62 said:
thanks i'm actually in the process of putting windows on my mbpro
Click to expand...
Click to collapse
Let me know how it goes.
Help for rooting Razr Xt 910
Hi Friends...
i am totally new in this, please guide me through rooting Razr xt 910..Currently my phone is stuck on offically 4.1.2 Android version. i just want to update phone to CM 11 based Kit kit on ma Razr...Thank You Very Much In Advance.
---------- Post added at 01:16 PM ---------- Previous post was at 01:04 PM ----------
onslaught86 said:
1. Yes. 2. No. 3. Neither, it will wipe the /data partition, which contains user-installed apps and their data. You will need to wipe the internal storage or SD card manually from Settings/Storage
i am totally new in this, please guide me through rooting Razr xt 910..Currently my phone is stuck on offically 4.1.2 Android version. i just want to update phone to CM 11 based Kit kit on ma Razr...Thank You Very Much In Advance.
Click to expand...
Click to collapse

Help!

I have a rooted droid razr and I have bootstrap recovery. I was trying to flash a rom and when I rebooted after the flash was complete, it started bootlooping. I thought no problem, ill just go back into recovery and try again. But every time I do power+vol down it doesn't go into recovery.....now I can't get into bootstrap and my phone is doing nothing but bootlooping. Can anyone please help me?
jm.ccrunner12 said:
I have a rooted droid razr and I have bootstrap recovery. I was trying to flash a rom and when I rebooted after the flash was complete, it started bootlooping. I thought no problem, ill just go back into recovery and try again. But every time I do power+vol down it doesn't go into recovery.....now I can't get into bootstrap and my phone is doing nothing but bootlooping. Can anyone please help me?
Click to expand...
Click to collapse
Sounds like you may have to sbf with RAZR tool. Always use safe strap to avoid these issues
Sent from my DROID RAZR using XDA
do you know antway I can just get back into recovery? I have a mac and I don't think I can use sbf
jm.ccrunner12 said:
do you know antway I can just get back into recovery? I have a mac and I don't think I can use sbf
Click to expand...
Click to collapse
You cant go to the custom recovery because the bootstrap is one time solution - everytime you want to ge to the bootstrap recovery you have to tell your phone to do so unless you have installed cwm on boot...
You'll probably need to use the rds in this case...
Sent from my XT910 using xda premium
But I have been running bootstrap for nearly 3 months? I was going from one rom to another. But can you post a link to your method of fixing it for me? I would greatly appreciate it lol
jm.ccrunner12 said:
But I have been running bootstrap for nearly 3 months? I was going from one rom to another. But can you post a link to your method of fixing it for me? I would greatly appreciate it lol
Click to expand...
Click to collapse
Just Google RAZR utility 1.6
Sent from my DROID RAZR using XDA

Custom font using Rom Toolbox, now stuck in bootloop

All my Droid Razr is doing is just showing the Motorola icon and nothing else after I tried changing the font on my phone using Rom Toolkit. I don't have bootstrap or a custom recovery loaded on my phone. I am hoping that I can flash a font zip from stock recovery and fix it without losing any data.
razieltov said:
All my Droid Razr is doing is just showing the Motorola icon and nothing else after I tried changing the font on my phone using Rom Toolkit. I don't have bootstrap or a custom recovery loaded on my phone. I am hoping that I can flash a font zip from stock recovery and fix it without losing any data.
Click to expand...
Click to collapse
What version RAZR XT912 or XT910?
Sent from my DROID RAZR using xda premium
dave5777 said:
What version RAZR XT912 or XT910?
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
I believe its the XT912. The Verizon one.
I believe I was able to fix it. I was going to use RSD Lite to flash the official ICS software. But I read the the fonts are only located on the system partition. So I took the official software and got the system img and in fastboot just flashed the system img. I had already lost all the data because I tried a factory reset. But I think that would have saved me from losing my data and I would just need to reroot the phone.

[HELP][BRICKED]:'( XT910 stuck on motorola boot anim even after sbf flash.

When i flash the xt910 with the sbf it boots but once i restart it gets into a bootloop please HELP anybody. I was earlier using cm10.1 but when i flashed the eu sbf on my indian razr it doesnt seem to work well HELP PLEASE
what i flashed was
benjamin.miller said:
When i flash the xt910 with the sbf it boots but once i restart it gets into a bootloop please HELP anybody. I was earlier using cm10.1 but when i flashed the eu sbf on my indian razr it doesnt seem to work well HELP PLEASE
Click to expand...
Click to collapse
I flashed EU JB sbf
help please anyone
Hello,
Don't forget to wipe data factory reset and wipe cache from stock recovery after you flash the sbf with rsd lite.
still stuck no progress
Semseddin said:
Hello,
Don't forget to wipe data factory reset and wipe cache from stock recovery after you flash the sbf with rsd lite.
Click to expand...
Click to collapse
its still stuck on the motorola ripple effect logo afrer wiping data ..please help :crying::crying::crying::crying::crying::crying:
dont give up mate
there is a way to revive them it is on this site somewhere i did it to mine about 2 weks ago but didnt bookmark the spot so keep looking.
found it
http://forum.xda-developers.com/showthread.php?t=2194825&highlight=how+to+unbrick&page=16
this worked for me, look through it, good luck
Still no progress..still in a bootloop
roscored1000 said:
http://forum.xda-developers.com/showthread.php?t=2194825&highlight=how+to+unbrick&page=16
this worked for me, look through it, good luck
Click to expand...
Click to collapse
Help please doesn't work after that had pilotnthing

[Q&A] DROID RAZR Utility XT912 Jellybean UPDATED

Q&A for DROID RAZR Utility XT912 Jellybean UPDATED
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
cool how to install/use it?
i want to reflash to stock because my 4g stopped working with carbon custom rom on moto rola droid razr x912
Yes... This worked for me.
After searching and trying for days, this has worked and I now have root access. Thank you.
Things that I set which may help others are:
I did a full factory reset and wiped all data and cache.
Connected via USB in "camera" mode rather than "Mass Storage"
Entered "Smart Actions" via Settings/Managed Apps.
System version was 98.72.165.XT912.Verizon.en.US
Android version:4.1.2
A common problem encountered when trying to root is when Smart Actions has already been initialised, either on a previously used system or of an unsuccessful attempt has already been made. In this case, simply go to applications and clear data for Smart Actions, then start over...
- Brian
"It works! It works! I finally invent something that works!" -Dr. Emmet Brown
AIO XT912 Stock Utility:
Reflash/Root/SafeStrap​
XT912 started boot loop, can't get the
Hello, I am a noob to this and this would be my first post. I have an XT912 that was bone stock (been updated to Jellybean via network updates)and stuck in a bootloop. I have downloaded the droid razr utility (batman by Matt) to my Widows 7 computer, and tried the wipe all data option 1 and without wiping data option 2 and they both get stuck in the "writing system..." and that is as far as it goes. I've waited for hours, no change and eventually my battery has died. Yesterday I performed surgery on a cable and made a programmers cable so it will communicate and stay powered up as long as it is plugged in, I just can't seem get past the hang up when it goes to "writing system..." what could I be doing wrong here?
XT912 Pattern
I had tried everything to remove a forgotten pattern on a droid xt 912 but no luck. i had used the xt912 utility and flashed via fastboot but still appears, pls help.
Thanks in advance!
mekatech said:
I had tried everything to remove a forgotten pattern on a droid xt 912 but no luck. i had used the xt912 utility and flashed via fastboot but still appears, pls help.
Thanks in advance!
Click to expand...
Click to collapse
You wiped data in Android recovery?
Sent from my XT912 using Tapatalk
sd_shadow said:
You wiped data in Android recovery?
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
Yes Bro! that was the first thing i did!
If wiping data didn't work, then it maybe bad flash memory, no fixing that.
Sent from my XT912 using Tapatalk
Re-bricked after using original Droid Razr Utility XT912
Please forgive me as this is my first post. After using the original Droid Razr Utility XT912, I was able to re-flash to JB 4.1.2 and updated to the latest OTA. However, I could not get the utility to Root my phone (kept saying outdated/expired adb or something to that effect), so I was able to get root via Kingo Root. I then noticed that there was an updated version of Safestrap (3.75) vs. what I had been using prior (3.73), but when i downloaded and installed the apk, the phone reboots to the safestrap splashscreen (which appears oversized for the phone compared to my former working version 3.73) for about 10 seconds, then the screen goes black. I tried wiping everything from within the android recovery and re-running your updated utility to no avail. Please don't tell me I've finally killed off my old reliable. Many thanks in advance
brownsbacker60 said:
Please forgive me as this is my first post. After using the original Droid Razr Utility XT912, I was able to re-flash to JB 4.1.2 and updated to the latest OTA. However, I could not get the utility to Root my phone (kept saying outdated/expired adb or something to that effect), so I was able to get root via Kingo Root. I then noticed that there was an updated version of Safestrap (3.75) vs. what I had been using prior (3.73), but when i downloaded and installed the apk, the phone reboots to the safestrap splashscreen (which appears oversized for the phone compared to my former working version 3.73) for about 10 seconds, then the screen goes black.
Click to expand...
Click to collapse
This is a little off topic, this a safestrap issue not utility.
did you follow the readme.txt for the new safestrap?
I tried wiping everything from within the android recovery and re-running your updated utility to no avail.
Click to expand...
Click to collapse
re-run what options? what is it doing now? still getting safestrap bootmenu after reflashing firmware?
---------- Post added at 02:16 PM ---------- Previous post was at 02:02 PM ----------
using Safestrap-spyder-v3.75.apk
verify size? 14.0 MB (14,746,268 bytes)
Once again, sorry for what appears to be off topic, but as I stated earlier, it wasn't until I tried to install safestrap 3.75 that I had the problem. I followed the install instructions for ss, but since there was no older version onboard following a) re-flashing clean stock ROM while wiping data, I didn't need to uninstall previous version. And, yes all I get when rebooting is a non-responsive safestrap flashscreen for approx. 10 secs, then a black screen.
Droid Razr Utility Use
I am trying it reflash my phone using the Droid Razr utility jellybean. I down loaded the software and drivers, connected my phone opened the software but don't know what to do next. are there any instructions on this program. I clicked on RST lite but nothing happened. I have unrooted my phone and all I want to do is get rid of safestrap so I can sell it.
Any help appreciated
John Henley
rv7plt said:
I am trying it reflash my phone using the Droid Razr utility jellybean. I down loaded the software and drivers, connected my phone opened the software but don't know what to do next. are there any instructions on this program. I clicked on RST lite but nothing happened. I have unrooted my phone and all I want to do is get rid of safestrap so I can sell it.
Any help appreciated
John Henley
Click to expand...
Click to collapse
you don't have to flash firmware to remove safestrap, if stock rom slot is still stock
boot to stock rom, open safestrap app, select uninstall recovery, press home button
Menu>Manage Apps> select safestrap uninstall
delete twrp and safestrap folders from internal and external sd cards
done
---------- Post added at 11:07 AM ---------- Previous post was at 11:05 AM ----------
you don't use RSD Lite with the Utility, one or the other.
---------- Post added at 11:13 AM ---------- Previous post was at 11:07 AM ----------
Video Flashing firmware with RSD Lite
or
Video Using the Droid Razr Utility
I selected the safestrap menu on startup, selected boot to stock ROM but I do not know how to open the safestrap app. I do not see the safestrap app listed or uninstall recovery.
rv7plt said:
I selected the safestrap menu on startup, selected boot to stock ROM but I do not know how to open the safestrap app. I do not see the safestrap app listed or uninstall recovery.
Click to expand...
Click to collapse
if you unrooted
probably need to reroot
reinstall original safestrap version
then go through uninstall steps

Categories

Resources