My MMX A110Q has gone on a bootloop. (I guess its hard bricked). I do not have usb debugging on
I tried reinstalling stock rom with SPFlash Tool but didnt work as the phone does not stay connected to pc for more than 2 seconds. Installed the drivers in my PC successfully. Now what should i do in this case. I used this tool "Mt657xRepartition_EN.apk". Which lead to this issue. Please do reply.
Thanks
Related
Here is my complete problem,
My device is Micromax a110(canvas 2) (AKA Cynus t2 or Qmobile a10) (The board is s9081).
I was in CWM and i flashed the galaxy custom rom(meant for my device) it worked nicely after due to some reasons i rebooted it on factory mode after that the device went to bootloop, the bootscreen shows and then restarts infinitely , so i decided to reflash the stock rom (Stock recovery) so that i removed the battery and connected the phone via usb, now my phone detected as MT65xx preloader and in a second it disappers instantly. i tried testpoint too it doest works ,it is not the driver problem since the device needs to be detected and stay detected for that long to install the drivers(and i do have the drivers), is there any solutions for that? any help is appreciated, thanks in advance.
Ayow nigga .
The problem started when my system updates, after I click upgrade I've experience some effin errors . Then my Gionee m3 started to malfunction .
Help me this effin loop is so irritated . I already tried to flash stock rom , SP Flash, and I also download mediatek and some usb drivers . I think my main problem is SP flash tool cant recognize my device it wont charge either . Help me do you have some solution ?
i have the same problem my gionee m3.... i dont know other method to usb debuging my phone because it is only showing of android system recovery 3e when i use adb devices it not recognize it only shown as 0123456789abcdef sideload... in my searching it will change if i usb debugging enable... also sptools work on usb debugging i think
I have the same problem. I have installed two different sp flash tools, installed ADB drivers. my PC detects my phone and charging but having the option to open my files. I tried SP flash tools but wont detect my phone and will just charge.
PLease help.
Hi all,
I have a similar problem of bootloop after installing cm13 and gapps, it keeps rebooting back to twrp recovery. pls help.
Hello guys.
I have a problem with my phone. It's an Archos 40 Titanium (neither model c or model b).
I flashed recently the rom of Wiko Sunset which is a KitKat rom. I thought it would be fine as wiko sunset has really similar features to my phone. Before I flashed that rom, I made a backup with SP Flash tool.
The problem now is that I can't flash the backup back. I get always Error 4032: Enable_DRAM_Failed. I've tried different versions of SP Flash Tool and drivers (MTK USB and VCOM drivers). I've followed many "guides" that I found on different websites (eg. to flash the preloader of the stock rom without having the battery in the phone etc), but unfortunatelly I get still the same error.
It's maybe worth mentioning that if I connect the phone without the battery and by pusshing VOL+ and power buttons then it connects but after 4-5 seconds it disconnects. If I do the same with the battery on, then it doesn't disconnect.
I am running Windows 7 x64 and Linux through dual boot.
I would be greatful if you guys could help me.
If you need any more info, you can ask me.
Thank you in advance.
Update:
I solved it by myself. After some tries it "accepted" the format I was trying to do (with SP Flash Tool) . Now I am flashing back my backup..
how to
first download the right firmware for this phone
then open sp flash tool and open the scarter from firmware if the firmware is corect all the directions is on screen of sp flash tool.
now click the download buton
after 2 sec remove the batery from your phone and conect the usb cable
windows update find automatic the right drivers mtk 65xx preloader vcom and after 5 sec the drivers is ok.
sp tool now flashing the firmware and the yelow bar work .
when you see the check on green square ,work is finished.
now you can unplung the usb cable and open your device.
What if i ddnt get the stock rom...
My bootloader is gone..
And phone is dead..
Really in financial problem
ELUGA S STOCK ROM...
google drive links are showing
404 error
You can find the right rom for your device on needrom site and flash it again. Check the choice of download+format
Ok.
FLASHED 2.DUMP_ROM [SPFT][ROOTED] FROM All About CherryMobile Flare 4 AFTER IT SAYS FLASHING IS DONE 100% WITH CHECK MARK THEN MY PHONE DIDNT RESTART I WAITED FOR ABOUT 15 MINUTES TO SEE IF THERE'S SOMETHING MIGHT HAPPEN BUT NOTHING ONLY BLACK..
SO I PULLED THE USB CONNECTOR, THEN PLUG IT BACK. THE ONLY THING THAT I SAW IS UNRECOGNIZED USB. NO CHARGING LOGO OR ANDROID OR ANYTHING EVEN THE LED INDICATION OF CHARGING IS NOT BLINKING.
I HOPE SOMEONE CAN HELP ME :crying::crying::crying::crying::crying::crying::crying:
UP
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
AlexanderBabansky said:
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
Click to expand...
Click to collapse
thanks bro.
now it show dram fail (4032)
Help me to unbrick my device however I have tried those sp tools and all but my my device is not keep able to connect to pc for more than 3 seconds..!
same problem here bro,phone disconnect after 3-4 secs. mobile repeatadly restarts from boot logo. no recovery, just restart everytime.
mklkumar4 said:
Help me to unbrick my device however I have tried those sp tools and all but my my device is not keep able to connect to pc for more than 3 seconds..!
Click to expand...
Click to collapse
If you having problem to use sp tools, I prefer u to use YGDP tool, download rom for micromax in (.cpb) format. And run with YGDP tool. You will get videos on YouTube how to use YGDP tool . Follow instructions step by step. I m hoping ur device will be unbrick.
mklkumar4 said:
Help me to unbrick my device however I have tried those sp tools and all but my my device is not keep able to connect to pc for more than 3 seconds..!
Click to expand...
Click to collapse
Use the YGDP tool..download from google...and if your device disconnects after some seconds...just install the right drivers...or sometimes its the problem of the computer itself...so just try a different pc!....I have unbricked my A311 after trying it on my friends pc!
HaCkEr007_Suyog said:
Use the YGDP tool..download from google...and if your device disconnects after some seconds...just install the right drivers...or sometimes its the problem of the computer itself...so just try a different pc!....I have unbricked my A311 after trying it on my friends pc!
Click to expand...
Click to collapse
actually i'm linux user so, it's big deal for me
i have tried it on virtual machine and my desktop PC too that is running on windows bt as you say, i'll try it on different system