hi.
i am new in this forum.
i have mediapad x1 .when try to install kitkat 4.4.2 from cwm recovery after restart tablet not power on.
when try to power on it , just turn on led fro 10 second and power off led.(led trun on as red and green)
recovery and fastboot not accessible from pc.just show as unknown device with China name in device manager.
vol up + power and other ways not work.
please help me.
Excuse me for bad english
surbiks said:
hi.
i am new in this forum.
i have mediapad x1 .when try to install kitkat 4.4.2 from cwm recovery after restart tablet not power on.
when try to power on it , just turn on led fro 10 second and power off led.(led trun on as red and green)
recovery and fastboot not accessible from pc.just show as unknown device with China name in device manager.
vol up + power and other ways not work.
please help me.
Excuse me for bad english
Click to expand...
Click to collapse
Dear surbiks,
Did you go thru these forums before putting CWM on your device? CWM does not give any advantage except nandroid backup. You cannot flash huawei roms via CWM. To flash roms you need the original huawei recovery in place i.e. you need to overwrite CWM with original recovery before attempting to flash a new rom huawei way via dload folder.
You can try post #15 solution to set you device right from the following URL:
http://forum.xda-developers.com/huawei-mediapad/general/bricked-huawei-mediapad-7-x1-t2884279/page2
Good Luck.
my problem not solve :crying:
please help me.
surbiks said:
my problem not solve :crying:
please help me.
Click to expand...
Click to collapse
I think u have to go to huawei service center
http://forum.xda-developers.com/showthread.php?t=2682979
=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachd....7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.
eennap said:
http://forum.xda-developers.com/showthread.php?t=2682979
=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachd....7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.
Click to expand...
Click to collapse
i say no fastboot and no recovery. it is hard bricked. no way connect to pc.JTAG cant flash eMMC .
It may be useful for your Idea.
REPAIR / RESURRECTED HARDBRICK REDMI NOTE 4G LTE
http://en.miui.com/thread-100592-1-1.html
my problem not solve .i need firmware file to write in emmc ic by box.
hi
i have same problem i ask if you fix it or not pleas help
---------- Post added at 04:18 PM ---------- Previous post was at 04:09 PM ----------
i have mediapad x1 .when try to install kitkat 4.4.2 from cwm recovery after restart tablet not power on.
when try to power on it , just turn on led fro 10 second and power off led.(led trun on as red and green)
recovery and fastboot not accessible from pc.just show as unknown device with China name in device manager.
vol up + power and other ways not work.
please help me. email [email protected]
hi
pleas if you fix this problem tel me i have samr problem
hi
surbiks said:
hi.
i am new in this forum.
i have mediapad x1 .when try to install kitkat 4.4.2 from cwm recovery after restart tablet not power on.
when try to power on it , just turn on led fro 10 second and power off led.(led trun on as red and green)
recovery and fastboot not accessible from pc.just show as unknown device with China name in device manager.
vol up + power and other ways not work.
i have same problem tel me what you do u fix it or not
Click to expand...
Click to collapse
Follow post #5 above, it works perfect, I had the same issue.
Extract the recovery from the firmware and reflash the way eenapp says.
I had to change the words to lowercase in the flash command and it worked.
hi
السلام عليكم انا عندى مشكلة كبيرة وارجو منكم الحل عملت سوفت ل mediapad x1 ببرنامج MediaPad-X1_Recovery_4.4.exe والجهاز بعد كدة عمل رست ومشتغلش تانى لا زر باور شغال ولا اي شيء بس لما ادوس باور تنور اللمبة احمر واخضر ثوانى وتفصل ولكم جزيل الشكر
---------- Post added at 07:03 AM ---------- Previous post was at 07:02 AM ----------
hi
i have Huawei mediapad x1 7d-501u tablet and when i flash it , it hard bricked.
i need image of mmcblk0 to repair it with jtag.
some one can create backup from this and give me?
please help
---------- Post added at 07:07 AM ---------- Previous post was at 07:03 AM ----------
i used this program then my mediapad x1 stopped working help me
---------- Post added at 07:08 AM ---------- Previous post was at 07:07 AM ----------
MediaPad-X1_Recovery_4.4.exe
I did update files error in the folder on the internal storage shed with three buttons not DLOAD update, Mediapad x1 logo stuck on the phone and did not look up, when the phone is powered off, and turn the phone vibrates work, but the logo is Huawei and because spilled into the internal update files memory could not do anything and I did not phone comes logo stuck on the MediaPad x1, phone comes fast downloads I burn when uploading a file with ADB, writes the remote loader is not allowed Because zakryt.Telefon will not be put into the restoration and only takes FastBoot.
Please help me to solve this problem
Related
So trying to fastboot my phone with doomlord Xperiasspeed
I did the command :
Fastboot flash system boot.img
and i changed the name of the xperiasspeed.img to boot.img
Everything said it installed successfully, but now when I press the power button, it vibrates but does not boot.
I can get back into fastboot mode but thats it.
any help or ideas?
thanks
Flashtool.
could you possibly elaborate?
I am downloading the flashtool but what is the purpose and how do you use it?
I'm not an expert but it not sound like bricked device, but rather kernel installation that went wrong.
Just try flashing one more time, or flash your backup. You did a backup aren't you?
Sent from my LT26i using xda premium
brdl04 said:
could you possibly elaborate?
I am downloading the flashtool but what is the purpose and how do you use it?
Click to expand...
Click to collapse
Read the docs, there's a nice guide. You can also try the repair feature in PC Companion, but it might require the system to boot, so not sure.
K900 said:
Read the docs, there's a nice guide. You can also try the repair feature in PC Companion, but it might require the system to boot, so not sure.
Click to expand...
Click to collapse
What docs are you refferring to?
I have downloaded stock LT22_6.0.B.1.654.zip and am wanting to use the flash tool to flash this .img
OK step by step
Your phone could be easily recovered, we can try to do it
1.- have you tried a cold reboot ?? (with the xperia S hold both VOLUME UP key and POWER key during 10 to 15 seconds until device vibrates three times, not sure if it's the same with the P, then press power and check if it boots)
Still stuck??
2.- Download flashtool 0.8.0 and install it from here: http://androxyde.github.com/Flashtool/
-then download the 0.8.6 update and install it too
-then download a STOCK xperia P FTF and put it in the flashtool/firmwares folder (it should be in the root of your har drive, eg.: c:\flashtool\firmwares)
-then, enter flash mode (with the phone off hold VOL DOWN while connecting the USB cable to PC -> the LED will light green) and let your PC install the drivers
-then remove the USB cable, run Flashtool, press the flash button (the thunder icon), select "Flashmode" and click OK, select yourstock firmware for Xperia P and press OK
-When asked, enter flashmode again (flashtool shows an old xperia device, use the proper key combination for your device as stated before) and flash a fresh copy of the stock firmware.
-After flashing is complete, disconnect phone and press power to check if it's all OK.
---------- Post added at 12:37 AM ---------- Previous post was at 12:29 AM ----------
--------------------------------------------------------------------------------------
brdl04 said:
So trying to fastboot my phone with doomlord Xperiasspeed
I did the command :
Fastboot flash *system* boot.img
and i changed the name of the xperiasspeed.img to boot.img
...
Click to expand...
Click to collapse
BEWARE !!
1.- You are very confused my friend, "xperiasspeed" is from krabappel2548, not form doomlord.
2.- The proper commands should be:
To flash a boot image:
Code:
fastboot flash [B]boot[/B] boot.img
To flash a system image:
Code:
fastboot flash [B]system[/B] system.img
I am not sure what did you download from krabappel2548, but it seems you flashed a "boot" image to your phone's "system" image
You are mixing stuff up
Please read this guide before attempting anything again
-------------------------------------------------------------------------------------------------------------------------
Another advice:
Fastboot and Flashtool are different ways to flash.
To flash with flashtool you enter flash mode -> press the VOLUME DOWN key -> LED turns GREEN
To flash with fastboot you enter fastboot mode -> press VOLUME UP key -> LED turns BLUE
.
gtrab said:
OK step by step
Your phone could be easily recovered, we can try to do it
1.- have you tried a cold reboot ?? (with the xperia S hold both VOLUME UP key and POWER key during 10 to 15 seconds until device vibrates three times, not sure if it's the same with the P, then press power and check if it boots)
Still stuck??
2.- Download flashtool 0.8.0 and install it from here: http://androxyde.github.com/Flashtool/
-then download the 0.8.6 update and install it too
-then download a STOCK xperia P FTF and put it in the flashtool/firmwares folder (it should be in the root of your har drive, eg.: c:\flashtool\firmwares)
-then, enter flash mode (with the phone off hold VOL DOWN while connecting the USB cable to PC -> the LED will light green) and let your PC install the drivers
-then remove the USB cable, run Flashtool, press the flash button (the thunder icon), select "Flashmode" and click OK, select yourstock firmware for Xperia P and press OK
-When asked, enter flashmode again (flashtool shows an old xperia device, use the proper key combination for your device as stated before) and flash a fresh copy of the stock firmware.
-After flashing is complete, disconnect phone and press power to check if it's all OK.
---------- Post added at 12:37 AM ---------- Previous post was at 12:29 AM ----------
--------------------------------------------------------------------------------------
BEWARE !!
1.- You are very confused my friend, "xperiasspeed" is from krabappel2548, not form doomlord.
2.- The proper commands should be:
To flash a boot image:
Code:
fastboot flash [B]boot[/B] boot.img
To flash a system image:
Code:
fastboot flash [B]system[/B] system.img
I am not sure what did you download from krabappel2548, but it seems you flashed a "boot" image to your phone's "system" image
You are mixing stuff up
Please read this guide before attempting anything again
-------------------------------------------------------------------------------------------------------------------------
Another advice:
Fastboot and Flashtool are different ways to flash.
To flash with flashtool you enter flash mode -> press the VOLUME DOWN key -> LED turns GREEN
To flash with fastboot you enter fastboot mode -> press VOLUME UP key -> LED turns BLUE
.
Click to expand...
Click to collapse
When I hold down the Volume Down button and connect my Xperia P to flashtool, the notification LED goes green but the window with the old Xperia device doesn't go away and after a while the green LED turns red and the screen shows the charging animation.
I can enter CWM while the device powers up but I can't mount USB storage. My bootloader is locked and I tried to install the .54 small app tweak on my .544 (I didn't think it'd be an issue, but I was wrong! I'm a n00b. Nu H8 Pl0x )
I've also tried using the Sony Update Service but it can't detect my firmware because it can't detect my phone in Flash mode
Someone please help me. I've searched everywhere but couldn't find a solution.
I have the same problem, did you ever get this solved?
Old thread
Eason85 said:
I have the same problem, did you ever get this solved?
Click to expand...
Click to collapse
eswawan said:
Old thread
Click to expand...
Click to collapse
Check these websites. It will help.
If you are still confused about the process, ask again specifically!
http://developer.sonymobile.com/services/flash-tool/use-the-flash-tool-for-xperia-devices/
Hi!
This is for Huawei Mediapad T1 S8-701w/u aka Mediapad T1 Honor.
As we all know this device has LOCKED bootloader and it is not rootable (only russsia firmware for s8-701u is)!
I am not responsible for bricks so procede at your own risk!
Read whole process before you begin.
First backup everything including internal SDcard!
1) This process will install factory unlocked ROM with just basic testing apps you will loose your curent ROM( we will return it on step 3)
Download: https://drive.google.com/file/d/0B7RlBIN4xO50RUxqU1E2ZGJmRUk/view?usp=sharing
Extract and copy dload folder do root of your removable sdcard (external sdcard)Power off deviceHold volume down and turn on deviceWait till install process is done and device is booted again
2) Install custom TWRP recovery
Connect device to computer (ADB, fastboot needed and drivers installed)Download recovery.img from http://d-h.st/saW and copy to same folder with adb and fastbootType:
Code:
adb reboot bootloader
Once you are in bootloader (huawei logo) :
Code:
fasboot flash recovery recovery2.img
When done reboot (hold power button) or:
Code:
fastboot reboot
3) Now lets recover our original ROM:
Download rom for your device ( 701u or 701w)Here are some links:http://susutun1.blogspot.com/2014/08/android-firmware-huawei-s-series.html
http://forum.xda-developers.com/showpost.php?p=56376056&postcount=2
http://forum.xda-developers.com/showpost.php?p=57592296&postcount=20
http://forum.xda-developers.com/showpost.php?p=58036946&postcount=33
Here is western europe images for S8-701w I use this one
It is the best available firmware for 701w (also multilanguage)https://drive.google.com/file/d/0B7RlBIN4xO50QlFVSFZkWlhRX2c/view?usp=sharing
I can provide more firmwares but i have slow upload speed so I ask for someone here who can reupload them. I will send him link to inbox (limited download).
Extract UPDATE.app from firmwareDownload Huawei extractor (windows tool)http://forum.xda-developers.com/showthread.php?t=2433454
Open UPDATE.app with Huawei update extractor and extract SYSTEM.img and CUST.img (right click on images)Copy SYSTEM.img and CUST.img to your fastboot folderReboot to bootloader
Code:
adb reboot bootloader
Once you are in bootloader (huawei logo) :
Code:
fasboot flash system SYSTEM.img
fasboot flash cust CUST.img
Turn device off and boot to recovery (hold vol down and turn on)In recovery: Factory reset (format /data) and reboot.
Done!!
If you get stuck in bootloder unable to boot in recovery:
flash and boot into stock recovery to clear bootloder flag
then you can flash TWRP again Here it is:http://d-h.st/in71 (stock recovery)
Code:
fastboot flash recovery stockrecovery.img
To ROOT flash http://download.chainfire.eu/supersu in recovery
Recovery: newest TWRP http://d-h.st/saW
BUGS:
Internal sdcard is mounted to /data/media, while on device /storage/emulated so use external SDcard.
Also because of wrong mounts when you do wipe it will delete everything on internal SDcard (only /data/media will stay)
TOUCH dont work when booted: just wait till screen off timeout (10s), then press power to turn screen on it will work now
Sorry for bad english!
Recovery downloads:
Version 1: http://d-h.st/JRp
Version 2:http://d-h.st/saW
Changelog: Fixed touchscreen issues!!
Couldn't be better timing. Just received my 701w unit (Iskon HR)
Hi,
I did everything according to the instructions, but cannot enter the Custom Recovery. :crying:
I tried and CWM and TWRP.
ADB Tool shows that all goes well, but when I press any combination of buttons to enter the Recovery, Tablet enters in the bootloader ...
Now cannot install a different ROM, because it does not start Stock Recovery to initiate dload, it enters the bootloader and standing there.
Do you have any idea what to do ...?
Edit: From Now as soon as plug the USB cable Tablet lights up ...
Edit: Nothing deleted on the internal SD card... Still I can see my old files
darko150 said:
Hi,
I did everything according to the instructions, but cannot enter the Custom Recovery. :crying:
I tried and CWM and TWRP.
ADB Tool shows that all goes well, but when I press any combination of buttons to enter the Recovery, Tablet enters in the bootloader ...
Now cannot install a different ROM, because it does not start Stock Recovery to initiate dload, it enters the bootloader and standing there.
Do you have any idea what to do ...?
Click to expand...
Click to collapse
Can you explain what did you did last? Recovery, system, and cust images are flashed with fastboot in bootloader mode. There is only twrp recovery image here to download.
it Works
iodak said:
Can you explain what did you did last? Recovery, system, and cust images are flashed with fastboot in bootloader mode. There is only twrp recovery image here to download.
Click to expand...
Click to collapse
Thank you very much for your help in PM. With this Recovery2 in Post #2, Tablet works beautifully, and the entire process is quick and easy.
Root and TWRP Recovery I have, I can adjust the rest ... :laugh::good:
darko150 said:
Thank you very much for your help in PM. With this Recovery2 in Post #2, Tablet works beautifully, and the entire process is quick and easy.
Root and TWRP Recovery I have, I can adjust the rest ... :laugh::good:
Click to expand...
Click to collapse
Thanks for the info. I updated first post with more info on how to resolve issue if stuck in bootloader, unable to boot to recovery!
Now that we are unlocked we should make some presure (send emails) to Huawei to release kernel source!
It would be interesting to see is it somehow possible to flash 701w with 701u FW, because as I can see on my tablet, it seems that SIM connector is here, but filled with some kind of rubber sponge material.
It is posibble. Just use system and cust images from u version. I am not sure if the sim connector is in. Cant get that sponge out.
Edit: that factory unlocked update.app is from u version anyway
Edit2 I think that all roms are similar they just disabled some stuff for wifi version with config files.
like /cust/channel/*/prop/local.prop
ro.config.wifi.only=true
iodak said:
I am not sure if the sim connector is in. Cant get that sponge out.
Click to expand...
Click to collapse
Is there any link to see how to disassemble this tablet?
It would be much easier to put the sponge out with removed back plate.
Viper4Android
Thanks to iodak i rooted my tablet,everything works perfectly,but i cant install viper4Android...driver not install because busybox not work or i am not have fully rooted device..Viper4Android that say...Any solution?
gogy3d said:
Thanks to iodak i rooted my tablet,everything works perfectly,but i cant install viper4Android...driver not install because busybox not work or i am not have fully rooted device..Viper4Android that say...Any solution?
Click to expand...
Click to collapse
I installed Busybox after I turned off "Mount namespace separation" in SuperSu
---------- Post added at 05:16 PM ---------- Previous post was at 05:04 PM ----------
there was a problem: as soon as I push cable in tablet, from the charger or computer, tablet turn on, although previously it was switched off. Now I can not recharge when tablet is switched off, just when he is turned on...
I didn't do offline charging. I will see what i can do. That is not really a problem.
darko150 said:
I installed Busybox after I turned off "Mount namespace separation" in SuperSu
---------- Post added at 05:16 PM ---------- Previous post was at 05:04 PM ----------
there was a problem: as soon as I push cable in tablet, from the charger or computer, tablet turn on, although previously it was switched off. Now I can not recharge when tablet is switched off, just when he is turned on...
Click to expand...
Click to collapse
Me too---there is a problem offline charging,they not there.. i turn cable in charger tablet is turn on,only online charging,why?
iodak said:
I didn't do offline charging. I will see what i can do. That is not really a problem.
Click to expand...
Click to collapse
The truth is, this is not a problem, but it is unusual ...
darko150 said:
The truth is, this is not a problem, but it is unusual ...
Click to expand...
Click to collapse
Same here.Im unable to load recovery unless i use ADB command on PC???
Any help?
Vol down when powering on will get you to recovery.
Also in terminal emulator app
su
reboot recovery
I have to hold the buttons Power and Vol- right up to the moment when it appears Huawei logo. Then go into TWRP Recovery.
If I let a moment sooner or later, can not enter the recovery.
Although there are small imperfections, I'm very satisfied, thanks IODAK :good:
I use https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot&hl=hr quickboot to go in recovery.App needs root.
Or use standard procedure hold vol- power on...
Who knows when is build custom rom for S8-701W?
Hello all, as I can install drivers for fastboot on my machine, I tried everything and still can not admit it, the team also stays in the black screen, just turn on the LED in blue, my machine has Windows 10, has something to seeing that, I would appreciate your help, really.
1- Download and install the latest Flashtool driver for Xperia Z2 from here: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
2- Download and install Minimal ADB and Fastboot Setup v1.4 from this link: https://mega.nz/#!7942XJjI!9gurv7k3PVVFT8VViDbkg_sUiRTiDPeArhwjXsG XB9c
3- Download Xperia_Z2_driver.zip from this link: http://dl-developer.sonymobile.com/drivers/Xperia_Z2_driver.zip
4- Extract Xperia_Z2_driver.zip
5- Connect your Xperia Z2 with Computer by USB in (fastboot mode)
6- Press right click on My Computer icon then click on Properties.
7- In the new window that will open on the upper left side press on Device Manager.
8- Search in Device Manager window for Protable Devices, when you find it just press on (+) beside it.. when you extend it you will see Unknown device or your Xperia Z2 or some thing like that.
9- Right click on it and press on Update Driver Software.
10- In the new window select (Browser my computer for driver software) then click on Browse.. and choose the extracted folder from Xperia_Z2_driver.zip you have downloaded in Step 1,,, be sure that Include subfolders is checked then press next.
11- Done it must be installed and your phone must be regonized and work successfully in the fastboot mode.
Note <<<<<<<>>>>>>>> the most important thing in (Step 5) that when you start to install the fastboot driver for your phone you must put your phone in the fastboot mode don't forget that.
If there is anything not work with you or you need more description in it just tell me and i will help you.
I hope that i have helped you.
Reboot to windows 10 using advanced startup with disable driver signature. Then install whatever drivers u want to install. And also install flashtool driver from there. Happy flashing :good:
rakeshbro said:
Reboot to windows 10 using advanced startup with disable driver signature. Then install whatever drivers u want to install. And also install flashtool driver from there. Happy flashing :good:
Click to expand...
Click to collapse
Mostafa Sherif said:
1- Download and install the latest Flashtool driver for Xperia Z2 from here: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
2- Download and install Minimal ADB and Fastboot Setup v1.4 from this link: https://mega.nz/#!7942XJjI!9gurv7k3PVVFT8VViDbkg_sUiRTiDPeArhwjXsG XB9c
3- Download Xperia_Z2_driver.zip from this link: http://dl-developer.sonymobile.com/drivers/Xperia_Z2_driver.zip
4- Extract Xperia_Z2_driver.zip
5- Connect your Xperia Z2 with Computer by USB in (fastboot mode)
6- Press right click on My Computer icon then click on Properties.
7- In the new window that will open on the upper left side press on Device Manager.
8- Search in Device Manager window for Protable Devices, when you find it just press on (+) beside it.. when you extend it you will see Unknown device or your Xperia Z2 or some thing like that.
9- Right click on it and press on Update Driver Software.
10- In the new window select (Browser my computer for driver software) then click on Browse.. and choose the extracted folder from Xperia_Z2_driver.zip you have downloaded in Step 1,,, be sure that Include subfolders is checked then press next.
11- Done it must be installed and your phone must be regonized and work successfully in the fastboot mode.
Note <<<<<<<>>>>>>>> the most important thing in (Step 5) that when you start to install the fastboot driver for your phone you must put your phone in the fastboot mode don't forget that.
If there is anything not work with you or you need more description in it just tell me and i will help you.
I hope that i have helped you.
Click to expand...
Click to collapse
Hi thanks for the guide and files and have installed the drivers, dual recovery've roteado, and install the first room, no problems, but now wanting to install one based 6.0.1 stayed in a loop, as I can enter recovery mode, or as I can flash the stock, because in flashtool not recognize me the phone, trying to select the room to flash me nothing appears, or where I can download the roms stock? please help
ermite666 said:
Hi thanks for the guide and files and have installed the drivers, dual recovery've roteado, and install the first room, no problems, but now wanting to install one based 6.0.1 stayed in a loop, as I can enter recovery mode, or as I can flash the stock, because in flashtool not recognize me the phone, trying to select the room to flash me nothing appears, or where I can download the roms stock? please help
Click to expand...
Click to collapse
If you install Marshmallow Rom and it just stayed in a loop so you have to flash the bootloop fix for Marshmallow 6.0.1 that will fix this problem and the rom will boot successfuly :
1- Flash Marshmallow rom you want through the recovery.
2- Download this bootloop fix from this link: https://mega.nz/#!AJcwERiQ!FUmk6eS5aoVsFSZ1f4WZIELIt7sckPCj11n0AIdCNzU
3- Copy it to your phone or sd card then flash this bootloop fix through the recovery.
4- Reboot and the rom will boot successfully without any bootloop.
I wish that i had helped you.
If there is anything just ask me and i will answer you
Mostafa Sherif said:
If you install Marshmallow Rom and it just stayed in a loop so you have to flash the bootloop fix for Marshmallow 6.0.1 that will fix this problem and the rom will boot successfuly :
1- Flash Marshmallow rom you want through the recovery.
2- Download this bootloop fix from this link: https://mega.nz/#!AJcwERiQ!FUmk6eS5aoVsFSZ1f4WZIELIt7sckPCj11n0AIdCNzU
3- Copy it to your phone or sd card then flash this bootloop fix through the recovery.
4- Reboot and the rom will boot successfully without any bootloop.
I wish that i had helped you.
If there is anything just ask me and i will answer you
Click to expand...
Click to collapse
I'm searching a way to recover my forever-looping phone. I had the Android M, got the horribel ideia of using kingroot via PC and now the phone does not go to the OS. I've tried everything, I´m gonna try installing all drivers again (windows 10). Anyway, What can I do since I dont have recovery mode ?
Plus, when I try to flash a fresh rom, I get this;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I dunno whatelse to do. It's like the PC do not recognize the phone. The little brick just vibrates and loops.
---------- Post added at 03:55 PM ---------- Previous post was at 03:35 PM ----------
YEAH. I managed to reboot system via flashtool. MIRACLE.
Rickpg said:
I'm searching a way to recover my forever-looping phone. I had the Android M, got the horribel ideia of using kingroot via PC and now the phone does not go to the OS. I've tried everything, I´m gonna try installing all drivers again (windows 10). Anyway, What can I do since I dont have recovery mode ?
Plus, when I try to flash a fresh rom, I get this;
I dunno whatelse to do. It's like the PC do not recognize the phone. The little brick just vibrates and loops.
---------- Post added at 03:55 PM ---------- Previous post was at 03:35 PM ----------
YEAH. I managed to reboot system via flashtool. MIRACLE.
Click to expand...
Click to collapse
Ok bro. just come down we can solve it by two ways:
The first one by unlocking your bootloader then install recovery then flash a new rom through recovery.
The second way is to keep the bootloader locked and recover your phone by using flashtool and any ftf for xperia z2
So which way from the two ways you want to solve your phone by it?
Mostafa Sherif said:
Ok bro. just come down we can solve it by two ways:
The first one by unlocking your bootloader then install recovery then flash a new rom through recovery.
The second way is to keep the bootloader locked and recover your phone by using flashtool and any ftf for xperia z2
So which way from the two ways you want to solve your phone by it?
Click to expand...
Click to collapse
I guess the bootloader is unlocked, so I would like to flash the recovery. Is there a way to do it via Flashtool?
The phone now iwont even loop. It's stucked in the SONY logo. -_-
Hi thanks, I found the way, now what I need is how to root, I've tried with dual recovery, but send me error, and what I managed to do it is with kingroot, then with dual recovery and only then is installed or I have done something wrong? thanks again
Rickpg said:
I guess the bootloader is unlocked, so I would like to flash the recovery. Is there a way to do it via Flashtool?
The phone now iwont even loop. It's stucked in the SONY logo. -_-
Click to expand...
Click to collapse
If the bootloader unlocked so you can easily flash recovery by using fastboot commands by using these steps:
1- download and install Minimal ADB and Fastboot from this link: https://mega.nz/#!7942XJjI!9gurv7k3PVVFT8VViDbkg_sUiRTiDPeArhwjXsG XB9c
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img.html
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
6- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
7- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
8- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
9- when the phone reboot and the sony logo appear keep pressing the volume up and down until the twrp recovery opens
10- That is it.. you can from it wipe data, system, cache, dalivk cache and flash any rom you want
After you successfully flash a recovery just tell me and i will help you in flashing a new rom through the recovery
This way works only if you have bootloader unlocked
I wish i had helped you
---------- Post added at 06:04 PM ---------- Previous post was at 06:03 PM ----------
ermite666 said:
Hi thanks, I found the way, now what I need is how to root, I've tried with dual recovery, but send me error, and what I managed to do it is with kingroot, then with dual recovery and only then is installed or I have done something wrong? thanks again
Click to expand...
Click to collapse
Now you have a recovery right??
Mostafa Sherif said:
If the bootloader unlocked so you can easily flash recovery by using fastboot commands by using these steps:
1- download and install Minimal ADB and Fastboot from this link: https://mega.nz/#!7942XJjI!9gurv7k3PVVFT8VViDbkg_sUiRTiDPeArhwjXsG XB9c
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img.html
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
6- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
7- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
8- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
9- when the phone reboot and the sony logo appear keep pressing the volume up and down until the twrp recovery opens
10- That is it.. you can from it wipe data, system, cache, dalivk cache and flash any rom you want
After you successfully flash a recovery just tell me and i will help you in flashing a new rom through the recovery
This way works only if you have bootloader unlocked
I wish i had helped you
---------- Post added at 06:04 PM ---------- Previous post was at 06:03 PM ----------
Now you have a recovery right??
Click to expand...
Click to collapse
The flashin recovery did work but the phone does not turn on now. The power button only vibrates but it's all turned off...
Since I´m dealing with my phone from early mornin I dunno if there is a lack of battery. I´m loosing contacts with clients today =(
Rickpg said:
The flashin recovery did work but the phone does not turn on now. The power button only vibrates but it's all turned off...
Since I´m dealing with my phone from early mornin I dunno if there is a lack of battery. I´m loosing contacts with clients today =(
Click to expand...
Click to collapse
Sony logo doesn't appear after pressing the power button and vibrate??
Try to make hard reset by press and hold volume up button and press and hold the power button too until the mobile vibrates 3 times then wait for 10 seconds and try to power on the phone again normally and tell me if the sony logo has
OR wait
I knew the solution and i will write it now
---------- Post added at 07:28 PM ---------- Previous post was at 07:16 PM ----------
Rickpg said:
The flashin recovery did work but the phone does not turn on now. The power button only vibrates but it's all turned off...
Since I´m dealing with my phone from early mornin I dunno if there is a lack of battery. I´m loosing contacts with clients today =(
Click to expand...
Click to collapse
The solution as following:
1- Make hard reset first as i descriped in the previous post to make sure that the phone powered off completely.
2- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?usp=sharing
3- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
4- As i descriped go to Minimal ADB and Fastboot folder and press shift then right click and select Open command window here
5- Put your phone in fastboot mode by press and hold volume up and connect it with usb cable
6- Write the following command: fastboot flash recovery twrp-3.0.2-0-sirius.img
7- Then write this command after it: fastboot flash boot boot.img
8- Now reboot your phone by writing: fastboot reboot then unplug the usb from phone
9- When the sony logo appear press the volume up and down until it go into the recovery
10- Done
When the recovery opens successfully tell me if you want and i will help you to flash a new rom from the recovery
Mostafa Sherif said:
Sony logo doesn't appear after pressing the power button and vibrate??
Try to make hard reset by press and hold volume up button and press and hold the power button too until the mobile vibrates 3 times then wait for 10 seconds and try to power on the phone again normally and tell me if the sony logo has
OR wait
I knew the solution and i will write it now
---------- Post added at 07:28 PM ---------- Previous post was at 07:16 PM ----------
The solution as following:
1- Make hard reset first as i descriped in the previous post to make sure that the phone powered off completely.
2- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?usp=sharing
3- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
4- As i descriped go to Minimal ADB and Fastboot folder and press shift then right click and select Open command window here
5- Put your phone in fastboot mode by press and hold volume up and connect it with usb cable
6- Write the following command: fastboot flash recovery twrp-3.0.2-0-sirius.img
7- Then write this command after it: fastboot flash boot boot.img
8- Now reboot your phone by writing: fastboot reboot then unplug the usb from phone
9- When the sony logo appear press the volume up and down until it go into the recovery
10- Done
When the recovery opens successfully tell me if you want and i will help you to flash a new rom from the recovery
Click to expand...
Click to collapse
You are amazing. *..*
Can I wipe everything and install vi recovery the "D6503_Customized US_1281-9709_23.5.A.0.575_R3D flashable-prerooted-signed" ?
Rickpg said:
You are amazing. *..*
Can I wipe everything and install vi recovery the "D6503_Customized US_1281-9709_23.5.A.0.575_R3D flashable-prerooted-signed" ?
Click to expand...
Click to collapse
Yup you can
1- Make factory reset
2- Wipe > Data, Cache, System and Dalivk/ART cache
3- Download and flash D6503_Customized US_1281-9709_23.5.A.0.575_R3D flashable-prerooted-signed from this link: https://drive.google.com/open?id=0B-xW4tRK0miyc1RJWGZXQUZKYjA
4- Reboot
5- [This is an optional step maybe you need for it and maybe not] If you flashed this rom and you stuck in a bootloop or anything didn't work probably then flash this bootloop fix from this link: https://mega.nz/#!AJcwERiQ!FUmk6eS5aoVsFSZ1f4WZIELIt7sckPCj11n0AIdCNzU
6- Done
Mostafa Sherif said:
Yup you can
1- Make factory reset
2- Wipe > Data, Cache, System and Dalivk/ART cache
3- Download and flash D6503_Customized US_1281-9709_23.5.A.0.575_R3D flashable-prerooted-signed from this link: https://drive.google.com/open?id=0B-xW4tRK0miyc1RJWGZXQUZKYjA
4- Reboot
5- [This is an optional step maybe you need for it and maybe not] If you flashed this rom and you stuck in a bootloop or anything didn't work probably then flash this bootloop fix from this link: https://mega.nz/#!AJcwERiQ!FUmk6eS5aoVsFSZ1f4WZIELIt7sckPCj11n0AIdCNzU
6- Done
Click to expand...
Click to collapse
I just love when we get a happy ending lol :silly:
Thank you and keep up the good work.
Rickpg said:
I just love when we get a happy ending lol :silly:
Thank you and keep up the good work.
Click to expand...
Click to collapse
Hahahahahahahahahahaha You are welcome anytime my bro.
Because marshmallow not allow me to enter recovery, according install the ROM comes with preinstalled root and recovery and nothing
ermite666 said:
Because marshmallow not allow me to enter recovery, according install the ROM comes with preinstalled root and recovery and nothing
Click to expand...
Click to collapse
No no bro, you can enter recovery in marshmallow but instead of keep pressing on volume up as in lollipop to enter the recovery, in marshmallow you have to keep pressing on volume down to enter the recovery when you reboot your phone and the sony logo appears
So try and tell me
Hi guys,
I found Hard bricked Asus Memo pad in eletric waste, but whatever i tried was end unsuccessfully. Maybe someone can help me.
Situation:
- Tablet is stucked on ASUS logo.
- Volume up + power - dont work (no recovery)
- Volume down + power give me black screen but in PC i can see "Asus ADB interface"
- In this mode "ADB devices" give me nothnig.
- In this mode "Fastboot devices" give me > 123456789 Fastboot
So it looks like bootloader is "working" .....but
I already tried "Fastboot flash" recovery, boot etc.. but everything gives me "FAILED (remote: device is locked)" so it looks like bootloder is locked. I tried "fastboot OEM unlock" it give me OK but on screen nothing and still same error.
EDIT: Asus Flash tool dont work, but it looks like "user friendly ADB" ........ fastboot reboot-bootloader give me unknown usb device (device descriptor request failed) - RK driver wont work ...
EDIT2: ROCKUSB device installed. But RKflashtool give me rkflashtool: fatal: cannot open device
Some ideas how deal with it ?
EDIT (another) :
AndroidTool and Rockchip Factory tool are able to detect "LOADER device"
From both programs i got error "Firmware load failed" (i tried system.img, boot.img, recovery.img ...etc)
Me too.
I have this problem too.
Somebody please help.
Thanks.
feri79 said:
I have this problem too.
Somebody please help.
Thanks.
Click to expand...
Click to collapse
Read my post maybe it can help you , I just got fixed ASUS Fonpad 7 from client who gived to me to repair his device .
But to me in order to get in Recovery mode I pressed Vol + and Power button together and one I see Logo I release both keys and I pressed couple times Vol - when I saw USB Icon or DroidBoot menu.
If you are able to go in to Recovery you can flash your device with SD Card or update with fastboot .
https://forum.xda-developers.com/android/help/asus-fonpad-7-fe170cg-bricked-stuck-t3740819
Stock Rom
https://www.leakite.com/2017/10/download-asus-memo-pad-10-me102a-stock-firmware-flash-file.html
Thanks you so much.
I will try it and will say results to you.
I know this device is for 4 years ago and a budget device, but I bought an iPhone 7 Plus recently and dont have money to buy an android tablet! at least for next 6 month...
***
I dont want do anything, I just open my school books with it, and do homeworks, maybe 2-3 time weekly for about only 30 mins. I open them with my Asus notebook but PDFs are better in a 10.1' tablet!
---------- Post added at 01:22 PM ---------- Previous post was at 01:12 PM ----------
Teddy Lo said:
Read my post maybe it can help you , I just got fixed ASUS Fonpad 7 from client who gived to me to repair his device .
But to me in order to get in Recovery mode I pressed Vol + and Power button together and one I see Logo I release both keys and I pressed couple times Vol - when I saw USB Icon or DroidBoot menu.
If you are able to go in to Recovery you can flash your device with SD Card or update with fastboot .
https://forum.xda-developers.com/android/help/asus-fonpad-7-fe170cg-bricked-stuck-t3740819
Stock Rom
https://www.leakite.com/2017/10/download-asus-memo-pad-10-me102a-stock-firmware-flash-file.html
Click to expand...
Click to collapse
I read the steps, but fastboot isnt working on this device, because non of the "fastboot flash ..." or "adb reboot fastboot" commands works. Also DroidBoot isnt working.
What should I do so?
Thanks
How your device is recognized in Device Manager ?
Teddy Lo said:
How your device is recognized in Device Manager ?
Click to expand...
Click to collapse
Yes.
Also in "This PC" it shows as a "MTP Transfer Device" and it opens the folder and if I insert a Micro SD card, it will show that also.
device is stuck in boot.
when I hold power button, the asus logo shows and then after asus animation, the progress circle spins and spins and spin...
after 10-15 second, the brightness increased a bit, like zenfone 5 boot and this tablet. that it brightness goes up a bit and then device boots and shows lockscreen. but now brightness increases but it still keeps at that screen. and dont boot.
---------- Post added at 03:40 PM ---------- Previous post was at 03:16 PM ----------
Teddy Lo said:
How your device is recognized in Device Manager ?
Click to expand...
Click to collapse
Sorry, I think that you ask "Is" your device recognized in device manager.
-->It is recognized as: "USB MTP Device" under "Portable Devices"
Hi , try to manualy instal this ADB driver on Device Manager , make sure your device is OFF and try again (Vol + and Power button together and one I see Logo I release both keys and I pressed couple times Vol - when I saw USB Icon or DroidBoot menu)and connect your phone with usb open ADB comand line and write fastboot devices .
If not try eith other combination for example
Power off your device and press VOL + and plug USB
-||- and press Vol - and plug USB
-||- and press both Vol - and Vol + and plug USB
If your device is recognised in fastboot extract 3 image files from firmware and flash with fastboot commands like in my post .
https://www.asus.com/Tablets/ASUS_MeMO_Pad_10_ME102A/HelpDesk_Download/
Teddy Lo said:
Hi , try to manualy instal this ADB driver on Device Manager , make sure your device is OFF and try again (Vol + and Power button together and one I see Logo I release both keys and I pressed couple times Vol - when I saw USB Icon or DroidBoot menu)and connect your phone with usb open ADB comand line and write fastboot devices .
If not try eith other combination for example
Power off your device and press VOL + and plug USB
-||- and press Vol - and plug USB
-||- and press both Vol - and Vol + and plug USB
If your device is recognised in fastboot extract 3 image files from firmware and flash with fastboot commands like in my post .
https://www.asus.com/Tablets/ASUS_MeMO_Pad_10_ME102A/HelpDesk_Download/
Click to expand...
Click to collapse
I manually installed that ADB driver from device manager. I tried those three last ways, last one worked, but it go to "Android System Recovey 3e". I have also went here by pressing volume+ and power button holding. nothing new
problem is that i can't go to fastboot. If it go there, then it can fixed. Like when I had a problem like this on my Zenfone 5 A500CG when rooted and installed a custom rom. and I fixed it my self with "fastboot flash ....." command. also I fixed a Asus Nexus 7 2012 with same story.
In the "Android System Recovey 3e" it have these:
-reboot system noww
-apply update from ADB
-apply update from external storage
-update image from external storage
-apply update from cache
-wipe data/factory reset
-wipe cache partition
when I select apply update from ADB, that is when my pc detects it as: Asus Android ADB interface and I when i type "adb devices" it shows my devices for <sideload> next to it.
on device screen it shows:
Now send the package you want to apply to the device with: "adb sideload <filename>"
Write this command :
adb reboot bootloader
Shut down the device
Hold Power button + volume UP at the same time
Once vibrate, hold volume up only and it should enter into fastboot mode and from fastboot you should flash images .
Here you have steps how to reinstall firmware:
https://www.youtube.com/watch?v=6E5wdjgXROg
Teddy Lo said:
Write this command :
adb reboot bootloader
Shut down the device
Hold Power button + volume UP at the same time
Once vibrate, hold volume up only and it should enter into fastboot mode and from fastboot you should flash images .
Here you have steps how to reinstall firmware:
https://www.youtube.com/watch?v=6E5wdjgXROg
Click to expand...
Click to collapse
Thanks but i already tried that command, but it says:
"Error: closed"
Reinstall ADB , and also all drivers use USBDeview to uninstall old drivers , scroll down for download
https://www.nirsoft.net/utils/usb_devices_view.html
Teddy Lo said:
Reinstall ADB , and also all drivers use USBDeview to uninstall old drivers , scroll down for download
https://www.nirsoft.net/utils/usb_devices_view.html
Click to expand...
Click to collapse
I installed USBDeview and done them, but it keep saying: "Error: closed" in the adb sideload connection
I think it is bricked reeeeally hard!
Did you tried to adb sideload and then add stock firmware from asus and hit Enter ?
Teddy Lo said:
Did you tried to adb sideload and then add stock firmware from asus and hit Enter ?
Click to expand...
Click to collapse
Yes i tried sideloading stock firmware first of all!
But the progress percent goes to 100% then on the device it says: start updating... then says verifying package... and then says verification failed, instalation aborted !
Try to disable driver signature on your pc , and try again if not try another firmware for your device if you have .
I want to root my device:angel: Huawei GR5 mini NMO-L31 emui 5.0. so I unlock bootloader and flash twrp IMG file.
I use this commands...
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
It worked successfuly:good:. But when I tried to go on recovery mode by powering off my device and perss power button and volume up Button my phone shows a warning message and below that it shows your device is booting now.
I wait about 1 hour but it still the same.
What to do now?
Please help me xda-devolopers with possible way.
THANK YOU.
I mistakenly posted it before in android themes.sorry.:crying:
Hi , can you post here a warning message which appears on your screen ?
Teddy Lo said:
Hi , can you post here a warning message which appears on your screen ?
Click to expand...
Click to collapse
Your device has been unlocked
and can't be trusted.
Your device is booting now...
It was the message I stuck in there.
Please help.
A.Greninja said:
Your device has been unlocked
and can't be trusted.
Your device is booting now...
It was the message I stuck in there.
Please help.
Click to expand...
Click to collapse
Help brothers..
I can't belived I posted back to you all the steps to unbrick your device also with pictures , but I don't see here ? Who knows , maybe is not alowed or a didn't Confirm a post . I will reply you later again .
---------- Post added at 03:43 PM ---------- Previous post was at 03:25 PM ----------
#1 Download Huawei Extractor and extract to one new folder on Desktop , for example "Huawei Firmware Extractor"
http://forum.xda-developers.com/attachment.php?attachmentid=3966156
#2 Download Update.zip and extract to one new folder on Desktop , for example "Huawei Update rom"
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v83821/f1/full/update.zip
#3 Run Huawei Extractor , locate to UPDATE.APP from extracted rom
and do exactly like this :
https://www.youtube.com/watch?v=XAtoaL6i_i0
#4 Download and install Minimal ADB & FastBoot
https://forum.xda-developers.com/showthread.php?t=2317790
#5 Make sure your device is OFF , and press together Vol - and Power button in order to poot your phone in FastBoot mode
#6 Open Minimal Adb & FastBoot Command tool , and connect your device .
#7 Next steps is to write this command and drag your , recovery.img , boot.img and system .img in Command tool
fastboot flash recovery (drag your recovery.img) and press Enter
fastboot flash boot (drag your boot.img) and press Enter
fastboot flash system (drag your system.img) and press Enter
Once is Finish you can flash this full version
http://www.stechguide.com/download-huawei-gr5-mini-nougat-firmware/
Read more for better understanding.
http://www.stechguide.com/download-huawei-gr5-mini-nougat-firmware/
Teddy Lo said:
I can't belived I posted back to you all the steps to unbrick your device also with pictures , but I don't see here ? Who knows , maybe is not alowed or a didn't Confirm a post . I will reply you later again .
---------- Post added at 03:43 PM ---------- Previous post was at 03:25 PM ----------
#1 Download Huawei Extractor and extract to one new folder on Desktop , for example "Huawei Firmware Extractor"
http://forum.xda-developers.com/attachment.php?attachmentid=3966156
#2 Download Update.zip and extract to one new folder on Desktop , for example "Huawei Update rom"
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v83821/f1/full/update.zip
#3 Run Huawei Extractor , locate to UPDATE.APP from extracted rom
and do exactly like this :
#4 Download and install Minimal ADB & FastBoot
https://forum.xda-developers.com/showthread.php?t=2317790
#5 Make sure your device is OFF , and press together Vol - and Power button in order to poot your phone in FastBoot mode
#6 Open Minimal Adb & FastBoot Command tool , and connect your device .
#7 Next steps is to write this command and drag your , recovery.img , boot.img and system .img in Command tool
fastboot flash recovery (drag your recovery.img) and press Enter
fastboot flash boot (drag your boot.img) and press Enter
fastboot flash system (drag your system.img) and press Enter
Once is Finish you can flash this full version
http://www.stechguide.com/download-huawei-gr5-mini-nougat-firmware/
Read more for better understanding.
http://www.stechguide.com/download-huawei-gr5-mini-nougat-firmware/
Click to expand...
Click to collapse
I am currently using this device.
It is not bricked.
Please help me to install twrp and root it.
Huawei GR5 mini. NMO-L31. EMUI 5.0
Huawei GR5 mini. NMO-L31. EMUI 5.0 /TWRP Recovery
A.Greninja said:
I am currently using this device.
It is not bricked.
Please help me to install twrp and root it.
Huawei GR5 mini. NMO-L31. EMUI 5.0
Click to expand...
Click to collapse
In order to install custom recovery you need to unlock your Bootloader , to do that follow instruction step by step.
https://www.youtube.com/watch?v=9ClbjG0ic4U
WARNING !!! I'm not responsible if you break your device or what ever , do at your own risk!
Good Luck
Sorry!
But the link you send me is for emui 4.0
But my one is emui 5.0
And I used this method but failed.
Note:I have unlocked my bootloader.
Try this one, and again do at your own risk!
How to Install TWRP Recovery Huawei GR5 2017 EMUI 5.0 | TWRP Recovery For Honor 6x Nougat 7.0
Search on yt with this tittle , other ways is to relax start searching .
No method is working.....
I'm so sad.
I lost every hope of rooting my device.
Who knows what to do?
A.Greninja said:
No method is working.....
I'm so sad.
I lost every hope of rooting my device.
Who knows what to do?
Click to expand...
Click to collapse
Try with this one https://www.gizdev.com/root-huawei-gr5-2017-emui-5-0-install-twrp/ :good: I wish you best of luck