Related
how can i root my lava n320
it works on gingerbird 2.3.6
my kernel version is 2.6.35.7 {[email protected]}
my gcc version is 4.4.3
my uboot version is 2010.06
my bb chip version is mt6575
please help me ..........so that i'm able to root my phone...
Rooting is possible in LAVA IRIS N350
shael1435 said:
how can i root my lava n320
it works on gingerbird 2.3.6
my kernel version is 2.6.35.7 {[email protected]}
my gcc version is 4.4.3
my uboot version is 2010.06
my bb chip version is mt6575
please help me ..........so that i'm able to root my phone...
Click to expand...
Click to collapse
Hello Guys,
I've root access to my LAVA Iris N350.
The only Possible way to get root is by Downloading the Flash files.
I'll upload the Complete Process with the ROM Files Soon:angel:.
getmesar said:
Hello Guys,
I've root access to my LAVA Iris N350.
The only Possible way to get root is by Downloading the Flash files.
I'll upload the Complete Process with the ROM Files Soon:angel:.
Click to expand...
Click to collapse
do it fast please
Pls Speedly Update ..,I need it
Root LAVA IRIS N350 with SP Flash tool and Droid Root and tool.
NOTE: This can BRICK your Phone. I'm not responsible for any damage. Stop immediately if you aren't familiar with Flash files, ROM's etc.
I've successfully got access to the root of LAVA Irirs N350.
Tools Needed:
1. MTKDroid root and Tools
2. SP_Flash_Tool_v3.1224.01
Drivers Needed :MediaTek-1.1123.0
Let's Start:
Step 1. Make a Scatter File:
Open MTK Droid Tool and Click on Block Maps..this will pop a new Window containing some Memory address. Simply Click on "Create Scatter File" and save the file.
Step 2. Prepare SP Flash tool:
Open SP Flash Tool and Click over "Scatter Loading" and select the File which we have create din step 1. Click on Readback tab.
Step 3.Preapare ROM:
Click on the button ADD. Double click on the line and save the ROM.
#Things To notice: The filename Will be like "ROM_#". in your case probably it'll be ROM_0.
#Remember the path of the File. U'll use this file later.
Alfter Clicking Save a new Window will appear named as "Read Back Block Start Address"
Windows Settings Will be as below
Type: Hex
Read Method:Read Page Only
Start Address: 0x0000000000000000
Length:0x12BA0000
Step 4. Readback ROM:
Click on Read Back button and connect the switched-off phone to PC.
Follow these Steps Carefully.Once Rom is Created you can use it in future.On success you'll see a BIG GREEN CIRCLE embded in a message box.
Step 5. Prepare files for FlashTool and make CWM:
Open the MTK Droid Root & Tools window which we left on 1st step.it is necessary to turn on phone and to connect it to the program. Click on To process file ROM_ from FlashTool button and choose the ROM_* file saved earlier. At successful unpacking rom it will be offered to choose CWM from similar phone. Chosen CWM it is checked on compliance to the connected phone and if ok, the CWM is created.
MOTE: A new scatter file and other neccessary files are created in the backup folder in droid root & trool program's directory.you'll need the files in the next step.
Starting with v2.4.0 CWM it is made automatically and the file from similar phone shouldn't be looked for any more!
Step 6. Download new CWM to the phone:
Start FlashTool, choose scatter in the folder created on the previous step. Remove marks from all blocks! Click on RECOVERY and we choose the file CWM in the same folder which was created on the previous step. Click Download and connect a cable to PC (phone has to be switched off) and expect the end of process.
DANGEROUS! On this step the CWM recovery block has to be marked only! Also it is necessary to use only the Download button and not to use at all the Firmware Upgrade button!
Summary of step 6:
--> Click on Scatter-loading.Select Scatter file from the backup folder.
--> Make Sure all the checkboxes are unchecked. Only the Checkbox labled as Recovery should be Checked.
--> Click Exactly over Recovery.
--> It will ask you to select a file. Now select a Recovery file created in step 6. Tt must be inside backup folder named as "Recovery_###.img"
--> Click Button Download.
--> Connect SWITCHED OFF phone.
Message bog with a green circle shown? it means all done.Exit.
Step 7. Install Superuser.
Load phone in CWM mode, connect to MTK Droid Root & Tools, go on the tab root, backup, recovery and, pressing on this tab the necessary buttons, we do:
- install superuser (often mean "get root" under it)
You have a Rooted LAVA N350. :good:
Once Again: I'm not responsible for the any damage. Do it at your own risk.
friend ,
when I started mkt tool ,on right side message box promte that un-identify rom i.e rom cannot be create.
avoiding this i'm proceed to next step.
step 4 is not successfully done i.e it not proceeding.
now what i have to do? please help.
i rooted my lava iris n320 with this method thanks for this @getmesar nice of you to share this !
EDIT: I MADE A HQ THREAD HERE CHECK IT OUT
http://forum.xda-developers.com/showthread.php?p=45401999
install cm in lava n320
please solve my problem
I have root my lava n320 but I was not install cm in my device there is any easy way to install cm or how to install jellybean in my lava n320 please help me bro
Khan Noorullah said:
please solve my problem
I have root my lava n320 but I was not install cm in my device there is any easy way to install cm or how to install jellybean in my lava n320 please help me bro
Click to expand...
Click to collapse
Sorry! But you cannot install Jellybean on Lava N320.
Memory Offset not supported by MTK Chip.
please post how to root micromax unite a092 and also provide the link of softwares to be used and also cwm recovery for the phone
hacker Akash said:
please post how to root micromax unite a092 and also provide the link of softwares to be used and also cwm recovery for the phone
Click to expand...
Click to collapse
Try vroot ver.1.7.8.8479 from mgyun . Used at your own risk .Worked for me . Good luck !:good:
If vroot not working use this post
http://forum.xda-developers.com/android/development/root-method-micromax-a092-unite-t2840933
Flash insecure boot.img with fastboot then use vroot
I will post
are you sure this method will work...
because I tried v root but it's doesn't work
and can u please post how to root using sp flash tool!!
How to ROOT(only with PC):
1)Install Drivers.
2)Enable USB Debugging in Developer Option and Verify apps over ADB.
3)Connect Micromax A092 in charging mode.
4)Download Root Genius.exe Link:http://www.4shared.com/file/WDgZM98iba/RootGenius_en.html
5)Right click on it and select run as administrator then click on ROOT IT.
6)Don`t press anything on your phone till the phone reboot.
7)There will be KingUser as Root Manager installed in your phone.
(Needs Internet Connection on PC)
Hi,
i've just bought the new Lenovo Vibe X2 directly in china (model X2-TO, dual sim), the phone comes with cn firmware without gapps but you can flash the ROW firmware (official X2-EU) that contain the full gapps, but i have the following problem:
using X2-TO firmware: connection possible only in edge
using X2-EU firmware: no radio detected
It's possible to flash a different baseband? Inside the rom package package found at needrom site, i see two different baseband (.img file), but i don't understand how to use it.
Many thanks for help and suggestion
ugocat said:
Hi,
i've just bought the new Lenovo Vibe X2 directly in china (model X2-TO, dual sim), the phone comes with cn firmware without gapps but you can flash the ROW firmware (official X2-EU) that contain the full gapps, but i have the following problem:
using X2-TO firmware: connection possible only in edge
using X2-EU firmware: no radio detected
It's possible to flash a different baseband? Inside the rom package package found at needrom site, i see two different baseband (.img file), but i don't understand how to use it.
Many thanks for help and suggestion
Click to expand...
Click to collapse
Hi
Just use any root explorer and copy and replace modem.img in /system/etc/firmware/modem.img with the one from needrom site and set proper permission rw-r-r (644) and reboot your phone .
4shreyas said:
Hi
Just use any root explorer and copy and replace modem.img in /system/etc/firmware/modem.img with the one from needrom site and set proper permission rw-r-r (644) and reboot your phone .
Click to expand...
Click to collapse
Hi,
unfortunately the device is noot rooted, and i haven't found a procedure to do it yet...
ugocat said:
Hi,
unfortunately the device is noot rooted, and i haven't found a procedure to do it yet...
Click to expand...
Click to collapse
Hi
Use MTK chopper (from pc) or framaroot app to root your device
Hi,
framaroot don't work, tried all exploit (boromir, faramir, barahir), where i can find mtk chopper?
Hi
Link to motochopper : https://drive.google.com/folderview?id=0B-jnfJDmuKlCUFM1b3ZzWnNJaEU&usp=sharing
Guide:
Connect the phone with USB debugging enabled to PC via USB cable and run the motochopper (run.bat file). follow instructions in cmd prompt . Now the tool should push the exploit and root your phone. if no device is detected, install the correct drivers and try again.
Hit THANKS if it works
4shreyas said:
Hi
Link to motochopper : https://drive.google.com/folderview?id=0B-jnfJDmuKlCUFM1b3ZzWnNJaEU&usp=sharing
Guide:
Connect the phone with USB debugging enabled to PC via USB cable and run the motochopper (run.bat file). follow instructions in cmd prompt . Now the tool should push the exploit and root your phone. if no device is detected, install the correct drivers and try again.
Hit THANKS if it works
Click to expand...
Click to collapse
No success
ugocat said:
No success
Click to expand...
Click to collapse
Try "RootGenius" http://www.shuame.com/en/root/
Works for me every time.
Vibe X2 Radio not working
Dear all
I bought a Vibe X2 in China and installed the ROW ROM. Unfortunately the baseband (2G,3G,4G Modem) will be not recognized. I tried all the recommend root kits but no root kit is working. Do you know how I can root my Vibe X2 in order to install the correct modem image?
Thanks a lot for your help
Hi,
unfortunately i'm still wating for a solution
You Found something to Root it ? i have Indian Version and want to root it.
I just found this on net but not tested if work or not.
Download and copy SuperSU File on your device’s internal memory
Super SU --> http://www.mediafire.com/download/3q679a2jelhcumc/UPDATE-SuperSUv1.94.zip
Now connect your phone with USB.
Download, extract the SP flash tool to your local computer and click on Flashboot.exe
SP Flash Tool --> http://www.mediafire.com/download/kmt3bjcga3pyymf/SP_Flash_Tool_exe_v3.1344.0.212.rar
Now click on Sacatter file loading button and select the scatter that you are about to download to your computer
Scatter File -->http://www.mediafire.com/view/1ay2bacoyqo3mow/MT6582_Android_scatter_emmc.txt
Now select the Check Box BOOTIMG and select the Boot IMG that you download below.
Boot Image and CWM Recovery --> http://www.mediafire.com/download/cxc72ujjpxrg3if/Root_Lenovo_Vibe_X2_XDA.rar
Now select the Check Box RECOVERY and select the RECOVERY IMG that you just downloaded above.
Now Bookt in recovery mode (power key+Volumeup+Volumedown).Slect recovery mode and click install FROM SD Card.
Select UPDATE-SuperSU-v1.94.zip and this will root your device and add the SUuser
Not working there is no any proper root method for root?
I would love for a solution in order to change the baseband on the X2-TO. I'll even pay for it, if someone is willing to put the time in it. I love the phone, but I hate the fact that I can only get EDGE, if I'm lucky.
Unfortunstely, whatever you do, your device can't have 3g network because you bought wrong device. X2-to is based on TD-scdma network which just used in china, china telecom, and can only have 2g if you use wcdma. You should buy x2-cu version which is wcdma version.
Anyway I still looking for root method since I can't move my data without root access.. pleas tell me if anyone know. Thanks
Any news on root yet?
Been out for a while so it's getting a bit ridicilous
Really?
So I will never have 3g or 4g with this phone?No update can fix that?nothing at all?are you sure?
Still can not root this phone?
What about Towelroot
Mittul Shah said:
What about Towelroot
Click to expand...
Click to collapse
tried already with towelroot with no luck
Please help me I want to install custom recovery on my karbonn titanium MACHFIVE.
This phone running on lollipop 5.0. & it have MediaTek MT6582 1.3 GHz Quad-core processor
&2GB of RAM & 16GB internal memory.
have you rooted your fone
need root
i know machfive is new in the market but really need at least rooting method for it cause it have some bugs though pls pls pls developers we are relaying on you for this
Yes
farhanfarhan32 said:
have you rooted your fone
Click to expand...
Click to collapse
I have rooted phone.
I root with kingroot
mukulkumars13 said:
I have rooted phone.
I root with kingroot
Click to expand...
Click to collapse
kingo root does not worked for me
Use iroot it worked for me
Need recovery for it man..... Xposed is also need to flash zip n i dont hav recovery damn!!
ajju akm said:
Use iroot it worked for me
Click to expand...
Click to collapse
kingo root , iroot , towel root, every thing failed:crying::crying:
I just rooted with iroot windows application.
ashish128 said:
I just rooted with iroot windows application.
Click to expand...
Click to collapse
which version of iroot you used?
root with kingroot
i used kingroot ver. 4.0.0 and it works try it out
after root u can use http://forum.xda-developers.com/showthread.php?t=2379412 to make recovery for ur machfive as it is a mediatek device
hit thanks if i helped
ajju akm said:
i used kingroot ver. 4.0.0 and it works try it out
after root u can use http://forum.xda-developers.com/showthread.php?t=2379412 to make recovery for ur machfive as it is a mediatek device
hit thanks if i helped
Click to expand...
Click to collapse
king root 4.0 worked:laugh:
farhanfarhan32 said:
king root 4.0 worked:laugh:
Click to expand...
Click to collapse
Hi
Just bought this phone for my friend. While trying to root with kingroot v4 and 4.5 its does not works.. Can u tell me ur frmware version number ?
Is there any recovery for this phone Karbonn Titanium Machfive.
Thanks in advance.
Sent from my MACHFIVE using Tapatalk
phone stuck in boot loop after kingroot 4.5. what to do?
model karbonn mach five.
Ya my phone too struck in karnonn logo after updating su binary...
Please anyone provide the factory image of karbonn titanium mach five ASAP..
And also provide instructions for flashing the image
Device: Karbonn Titanium Mach Five
Status: Rooted, No custum recovery installed, Bootloop...
Kingroot 4.0 worked. Rooted successfully
Sent from my MACHFIVE using Tapatalk
Recover KARBONN TITANIUM MACHFIVE
rockybilla007 said:
Ya my phone too struck in karnonn logo after updating su binary...
Please anyone provide the factory image of karbonn titanium mach five ASAP..
And also provide instructions for flashing the image
Device: Karbonn Titanium Mach Five
Status: Rooted, No custum recovery installed, Bootloop...
Click to expand...
Click to collapse
The last week I had a similar issue stuck on KARBONN logo.
I used Stock from XDA Firmware xdafirmware.com/karbonn-mach-five
Download the necessary drivers (a must) .
The downloaded compressed file will have SP flash tool with it .
1 .Open "flash_tool.exe" under "\SP Flash Tool v5.1516" folder (with admin privileges) .
2 .Navigate to the "Download" section .
3. Click on the "Scatter-loading". Browse "MT6582_Android_scatter.txt" under "Firmware" .
4. Now this will give you a list of files to flash that comes from the "\Firmware" folder . Make sure every files load correctly to the list(location can be seen to the right of the item to be flashed) . Especially "Android" which correspond to the system.img file in the \Firmware which I think which actually solves the android system related files' problems.
5. Now Power off your phone .
'''Wait for a sec ( many people advice removing the battery for a while).
6. Now click on the Download sign in the SP flash tool window . Connect your phone with the USB cable immediately and click on the volume up or down for SP flash tool to detect your phone. If the phone gets detected SP flash tool throws some info on the left pane. Then the files will start flashing . Flashing status is provided by a yellow bar at the bottom of the window.
7. After the flash is complete a green ok popup.
8. Boot your phone to recovery and Wipe the cache partition.
9. Restart the phone.
This worked with my MACHFIVE . Wishing you luck :good:.
*Flashing always have a risk of bricking your phone. Think twice before you act . I will not take responsibility.
*Always take any errors in SP flash tool seriously and consult expert advice before continuing
*Even if you are stuck on boot if you have enabled USB debugging you can use adb pull to pull your data from memory.
greentoy said:
The last week I had a similar issue stuck on KARBONN logo.
I used Stock from XDA Firmware xdafirmware.com/karbonn-mach-five
Download the necessary drivers (a must) .
The downloaded compressed file will have SP flash tool with it .
1 .Open "flash_tool.exe" under "\SP Flash Tool v5.1516" folder (with admin privileges) .
2 .Navigate to the "Download" section .
3. Click on the "Scatter-loading". Browse "MT6582_Android_scatter.txt" under "Firmware" .
4. Now this will give you a list of files to flash that comes from the "\Firmware" folder . Make sure every files load correctly to the list(location can be seen to the right of the item to be flashed) . Especially "Android" which correspond to the system.img file in the \Firmware which I think which actually solves the android system related files' problems.
5. Now Power off your phone .
'''Wait for a sec ( many people advice removing the battery for a while).
6. Now click on the Download sign in the SP flash tool window . Connect your phone with the USB cable immediately and click on the volume up or down for SP flash tool to detect your phone. If the phone gets detected SP flash tool throws some info on the left pane. Then the files will start flashing . Flashing status is provided by a yellow bar at the bottom of the window.
7. After the flash is complete a green ok popup.
8. Boot your phone to recovery and Wipe the cache partition.
9. Restart the phone.
This worked with my MACHFIVE . Wishing you luck :good:.
*Flashing always have a risk of bricking your phone. Think twice before you act . I will not take responsibility.
*Always take any errors in SP flash tool seriously and consult expert advice before continuing
*Even if you are stuck on boot if you have enabled USB debugging you can use adb pull to pull your data from memory.
Click to expand...
Click to collapse
Sir thank you so much for replying have been waiting for weeks for the solution..
1)Downloaded the files
2)Installed drivers
3)Started flash tool and loaded scatter file
4)Clicked on download
5)Powered off phone and connected via usb
6)Flashing process started
7)Flashing finished and green ring appeared!!!
8)Device booted after some time.
Thanks again for the solution :good::good::good:
Thanks for the guide.
Did anyone made custom recovery for this phone yet. If anyone has a recovery kindly share here.
Sent from my MACHFIVE using Tapatalk
hi guys,
can you please help with rooting micromax canvas juice 3 q392. it runs on lollipop 5.1.
thanks,
vikas
which chipset your phone using?
have tried onclick root like kingroot,kingoroot,root genius,vroot,iroot,..etc
Phone Specs : http://www.gsmarena.com/micromax_canvas_juice_3_q392-7663.php
chipset : MT6580
http://www.gsmarena.com/micromax_canvas_juice_3_q392-7663.php
---------- Post added at 21:50 ---------- Previous post was at 21:47 ----------
And for Root try to google or xda search ...
http://pidapso.com/how-to-root-micromax-canvas-juice-3-q392-on-android-4-4-4-4-4/
if they failed,there is a way but it is little bit harder.....
need to edit some files and compile them manually....
to port TWRP
http://forum.xda-developers.com/showthread.php?p=32965365
arshad145 said:
http://forum.xda-developers.com/showthread.php?p=32965365
Click to expand...
Click to collapse
thank you for this detailed one:good:
Try to root with
1. Kingo Root ( Kingoroot Android )
2. Kingo Root for windows ( Kingo Root Windows )
1. Procedure :
1.) Download and install Kingo root apk from the link provided.
2.) Simply click on "one click root"
3.) Rooting will start and If rooted successfully then device will restart.
IF this not works for you then follow the next.
2.Procedure :
1.)Download Kingo root for windows from link provided.
2.)Install on PC.
3.)Start the application
4.)Connect your device with USB and click on "ROOT" on pc.
5.)It will start rooting your device.
6.)Rooting will take few minutes.
7.)IF rooted successfully device will restart.
Done!!
IF first one not works then try second one.
Second one mostly works.
Ask if stuck in any problem.
And Give " Thanks "if this works for you.
Good luck!
him.singh17 said:
Try to root with
1. Kingo Root
2. Kingo Root for windows
1. Procedure :
1.) Download and install Kingo root apk from the link provided.
2.) Simply click on "one click root"
3.) Rooting will start and If rooted successfully then device will restart.
IF this not works for you then follow the next.
2.Procedure :
1.)Download Kingo root for windows from link provided.
2.)Install on PC.
3.)Start the application
4.)Connect your device with USB and click on "ROOT" on pc.
5.)It will start rooting your device.
6.)Rooting will take few minutes.
7.)IF rooted successfully device will restart.
Done!!
IF first one not works then try second one.
Second one mostly works.
Ask if stuck in any problem.
And Give " Thanks "if this works for you.
Good luck!
Click to expand...
Click to collapse
Hi him.singh,
I tried both of the above and sadly it didn't work.
However I was finally able to root my device with kingroot successfully.
I do have a query though: a.) how do i disable "root safe protector " in kingroot.
b.) can i replace the kingroot (v 4.8.0) with superSu?
Thanks to all who took time to respond.
Regards,
Vikas
vikas_1983 said:
Hi him.singh,
I tried both of the above and sadly it didn't work.
However I was finally able to root my device with kingroot successfully.
I do have a query though: a.) how do i disable "root safe protector " in kingroot.
b.) can i replace the kingroot (v 4.8.0) with superSu?
Thanks to all who took time to respond.
Regards,
Vikas
Click to expand...
Click to collapse
Hello vikas_1983 ,
I apologise for this.
I forgot to mention Kingroot App.
And Congrats !! you rooted your mobile.
Now coming to your question...
--I dont understand your first question !!!!
-- Replacing Kingroot with superSu.
replacing is simple
++ Method ++
1) Download SuperSu me (Download)
2) Install and open app,
3) Click on "Blue android button" ,
4) It will start replacing Kingroot with SuperSu.
4) Now , Process finished , SuperSu starts automatically .
5) Now you can check "root" status by using Root Checker app
6) After this process if there is any kingroot icon in mobile then you can remove that manually.
This is simple
I hope it will work for you :good:
""Please Ask your first question in detail""
If got stuck anywhere .....feel free to contact me.
And Give " **Thanks** "if this works for you.
Good luck!
vikas_1983 said:
hi guys,
can you please help with rooting micromax canvas juice 3 q392. it runs on lollipop 5.1.
thanks,
vikas
Click to expand...
Click to collapse
kingroot now supports rooting micromax canvas juice 3 Q392
please visit kingroot.net
vikas_1983 said:
Hi him.singh,
I tried both of the above and sadly it didn't work.
However I was finally able to root my device with kingroot successfully.
I do have a query though: a.) how do i disable "root safe protector " in kingroot.
b.) can i replace the kingroot (v 4.8.0) with superSu?
Thanks to all who took time to respond.
Regards,
Vikas
Click to expand...
Click to collapse
kingroot apk or kingroot exe which aps helped you to root??
Hey Kesupat
You can use both..
As vikash is saying Kingroot worked for him..
Then both exe and apk will work..
Becauce scripts used to root are same whether you are rooting via PC or using Apk.
If Kingroot Rooted Micromax Q392 then King root have working script for that device.
So you can try both....
First try to root using APK.
If it not works then try to root using windows pc.
Hit "Thanks" if answer helped you..
Vikas how u rooted your mm canvas juice 3 q392 i also want to root my device please help me.
---------- Post added at 05:42 AM ---------- Previous post was at 05:28 AM ----------
Thnxx a lot xda friends i have rooted my mm canvas juice 3 q392 successfully by Kingroot thnxx taht firend who who suggested for trying kingrott latest version .... big big thankss.
substituting kingroot by supersu
is there any bootloop risk in substituting kingroot by supersu??
kesupat said:
is there any bootloop risk in substituting kingroot by supersu??
Click to expand...
Click to collapse
I don't think there is any risk..
To replace Kingroot with super su Follow (Click Here And follow the instructions to replace )
If got stuck anywhere .....feel free to contact me.
And Give " **Thanks** "if this works for you.
Good luck!
how to backup mmx q392 stock rom..........???
How to backup stock rom
kesupat said:
how to backup mmx q392 stock rom..........???
Click to expand...
Click to collapse
you need to be rooted
install terminal emulator
install root explorer
using root explorer go to the root of the phone ,then browse to dev folder----> block ----> platform -----> within platform try to browse different folders to find a folder named "by-name" . open it to find the address to one of its contents in the properties section . the address should be like
dev/block/platform/xxxxx/by-name; (xxxxx is replaced by one that ur device has )
now open terminal emulator and type
su
grant superuser access to terminal emulator , if prompted n then type
ls -al /dev/block/platform/xxxxx/by-name (xxxxx is replaced by one that ur device has)
u will get a list with elements like...
lrwxrwxrwx root root 2014-01-02 07:22 boot -> /dev/block/mmcblk0p33 (where address of block boot i.e "mmcblk0p33" is replaced by one unique for ur device )
try and find this "block info" for boot , system , recovery , copy to keep the list somewhere .
now in terminal emulator type
dd if=/dev/block/mmcblk0p33 of=/sdcard/boot.img (to backup boot image for your device to sd card ; replace "mmcblk0p33" with the "block info" address found in the above step )
repeat the same step for system and recovery to get system.img and recovery.img respectively
Now you have the backup of your system , recovery and boot partition that you can modify or flash from fastboot later if required !!
P.S. BE PAITIENT FOR system.img backup as it takes SOME time to back it up
after substituting of kingroot by su mobile do not start.......only canvas logo is showing???plz help.........
kesupat said:
after substituting of kingroot by su mobile do not start.......only canvas logo is showing???plz help.........
Click to expand...
Click to collapse
What Happened actually?
When it stuck in bootloop , while replacing ?
Do you have a complete backup of your phone?
And I am Sorry for that happened with you but this worked for me fine....
him.singh17 said:
What Happened actually?
When it stuck in bootloop , while replacing ?
Do you have a complete backup of your phone?
And I am Sorry for that happened with you but this worked for me fine....
Click to expand...
Click to collapse
its started after some time............please help me how to backup my phone ???& how to rocover stock rom...??