Q&A for [KERNEL][UNOFFICIAL][UBER]DorimanX LP 5.X.X
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][UNOFFICIAL][UBER]DorimanX LP 5.X.X. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Why cant this kernel support ext4?
gsoul5005 said:
Why cant this kernel support ext4?
Click to expand...
Click to collapse
The code for ext4 in the kernel still needs to be worked on. Right now, I need other developers to help fix this problem as I am unable to solve this problem on my own.
Hello,
I'm not sure how to interprete this Warning:
gsstudios said:
[KERNEL][UNOFFICIAL][UBER]DorimanX LP 5.X.X
CAUTION: All builds marked with 'TRIM' at the end has TRIM enabled. If you have brickbug affected emmc chip, avoid downloading it if you don't know what you are doing! For more information about the trim brickbug, visit Lanchon's guide here: http://forum.xda-developers.com/gala...eding-t2843238
Click to expand...
Click to collapse
The eMMC on my phone has according to eMMC check is:
Type: VYL00M
FwRev: 0x19
If I look at EMMC Bugs that means, that my phone is prone to the "#Samsung eMMC secure erase bug" but not to the "#MAG2GA TRIM bug".
I'm quite a noob, so I don'tknow, if I can use the TRIM kernel or if I better stay at the save side of the NON-TRIM version.
Can someone please tell me if the TRIM kernel is save for my phone?
Best regards
Ponsel
It is all your own risk flash ROM, MOD, Kernel....
Read this http://forum.xda-developers.com/showthread.php?p=61971146
I use TRIM every week or after ROM flash.
Thanks for your response. Because you got the same eMMC chip and the same FW version it has made me confident to give it a shot.
I've downloadet and installed "Kernel_Dorimanx-V11.0b005-[15-23]-[18-07]-LP-SGII-UBER-TRIM-signed.zip" via the CM recovery.
After rebooting to the recovery I whiped cache and davlink cach and did a factory reset.
Now I tried to reboot the system. Unfortunately i got stuck at a Dorimanx splash screen. 10 mins later I removed the battery, rebooted into the recovery and flashed the actual cm 12.1 nightly again (just to make shure that I did not brik my phone) which fortunately worked.
Can someone give me a hint what I did wrong?
Does it supports Synapse App? Thanks[emoji1]
Ponsel said:
Thanks for your response. Because you got the same eMMC chip and the same FW version it has made me confident to give it a shot.
I've downloadet and installed "Kernel_Dorimanx-V11.0b005-[15-23]-[18-07]-LP-SGII-UBER-TRIM-signed.zip" via the CM recovery.
After rebooting to the recovery I whiped cache and davlink cach and did a factory reset.
Now I tried to reboot the system. Unfortunately i got stuck at a Dorimanx splash screen. 10 mins later I removed the battery, rebooted into the recovery and flashed the actual cm 12.1 nightly again (just to make shure that I did not brik my phone) which fortunately worked.
Can someone give me a hint what I did wrong?
Click to expand...
Click to collapse
after install dori just wipe cache and dalvik
you need to reflash the rom again and then reflash dori again
ahmedali555 said:
Does it supports Synapse App? Thanks[emoji1]
Click to expand...
Click to collapse
Nope. Synapse is limited in terms of the amount of settings you can change. Stweaks was designed for dorimanx kernel.
kai1313 said:
after install dori just wipe cache and dalvik
you need to reflash the rom again and then reflash dori again
Click to expand...
Click to collapse
I like to thank you, that did the trick.
Whipping the dalvik somehow damaged my gapps, so I needed to reinstall them.
I figured, that installing a new nightly via the CM updater damages the dalvik again (maybe the CM kernel somehow interferes with it). If you install it via the recovery and apply the dori immediately after that (without system reboot) the dalvik stays intact.
Sent from my GT-I9100 using Tapatalk
great kernel and tnx @gsstudios! Will you or can you support and Slim based roms ( Slim LP )??? Thank You!
is there any tether issues with latest build (linaro)
my tethering(hotspot and usb) seems didnt work
LA's CM 12.1 20150801. Ist there a kernel with working bln mode?
In actual build from 07-28 bln wont work for me.
Goodd Morning
How to get back to default kernel of cm12.1 official nightly
al2ken said:
How to get back to default kernel of cm12.1 official nightly
Click to expand...
Click to collapse
Dirty flash the rom and you should get the default kernel again.
---------- Post added at 05:52 PM ---------- Previous post was at 05:51 PM ----------
FiSh-MoB said:
LA's CM 12.1 20150801. Ist there a kernel with working bln mode?
In actual build from 07-28 bln wont work for me.
Click to expand...
Click to collapse
Nope, there is no kernel that has BLN fully working. We are running out of kernel developers in the forum. :crying:
SORRY
gsstudios said:
Dirty flash the rom and you should get the default kernel again.
---------- Post added at 05:52 PM ---------- Previous post was at 05:51 PM ----------
Nope, there is no kernel that has BLN fully working. We are running out of kernel developers in the forum. :crying:
Click to expand...
Click to collapse
SIR WHAT do you mean about dirty flashed?? sorry im newbie about kernels on s2
al2ken said:
SIR WHAT do you mean about dirty flashed?? sorry im newbie about kernels on s2
Click to expand...
Click to collapse
Flash rom & gapps and do a wipe cache & dalvik (no wipe data)! ☺
AlexanderDG83 said:
Flash rom & gapps and do a wipe cache & dalvik (no wipe data)!
Click to expand...
Click to collapse
Gapps reflash isn't really necessary in most cases But I like to flash gapps again anyway.
Hi, is there any possibilty to change the saturation, contrast,... of the screen?
Related
Hi everyone. I'd really like to try or even port (with proper guidance) an i9100 rom to my i777, but I don't know what kind of modifications I should do to the rom itself or even if any of the kernels available to our phone do actually work.
The roms I'm willing to use are either of these:
http://forum.xda-developers.com/showthread.php?t=2607749 - Revolution Rom UX 2014 BUILD 1
http://forum.xda-developers.com/showthread.php?t=2573745 - WizzedUX
Yeah, I really want to experience newer samsung interface in my phone, maybe use them as a daily driver.
Appreciate any help, thanks!
a_lleras said:
Hi everyone. I'd really like to try or even port (with proper guidance) an i9100 rom to my i777, but I don't know what kind of modifications I should do to the rom itself or even if any of the kernels available to our phone do actually work.
The roms I'm willing to use are either of these:
http://forum.xda-developers.com/showthread.php?t=2607749 - Revolution Rom UX 2014 BUILD 1
http://forum.xda-developers.com/showthread.php?t=2573745 - WizzedUX
Yeah, I really want to experience newer samsung interface in my phone, maybe use them as a daily driver.
Appreciate any help, thanks!
Click to expand...
Click to collapse
There is a thread about this already on the first page mate.
http://forum.xda-developers.com/showthread.php?t=2609840.
The easiest way is to download AJK 4.9 mic swap and an i777 modem.
Download the rom you want and install it in recovery like this:
1. Full wipes, including /system
2. ROM
3. AJK 4.9 Mic Swap
- reboot recovery and follow the install instructions to the letter, from AJ's OP
4. Install modem
-reboot system-
That's it, Samsung roms are extremely easy to port. Flashing AJK will also correct your button layout.
---------- Post added at 04:49 PM ---------- Previous post was at 04:43 PM ----------
azeem40 said:
There is a thread about this already on the first page mate
Click to expand...
Click to collapse
That is true, but the roms he wants isn't installed in quite the same way as the one you wanted. On his there's no updater script to edit - it's pretty much wipe-flash-flash-flash.
SteveMurphy said:
The easiest way is to download AJK 4.9 mic swap and an i777 modem.
Download the rom you want and install it in recovery like this:
1. Full wipes, including /system
2. ROM
3. AJK 4.9 Mic Swap
- reboot recovery and follow the install instructions to the letter, from AJ's OP
4. Install modem
-reboot system-
That's it, Samsung roms are extremely easy to port. Flashing AJK will also correct your button layout.
---------- Post added at 04:49 PM ---------- Previous post was at 04:43 PM ----------
That is true, but the rom he wants isn't installed in quite the same way as the one you wanted. On his there's no updater script to edit - it's pretty much wipe-flash-flash-flash.
Click to expand...
Click to collapse
Ah okay. Thanks for the clarification.
azeem40 said:
Ah okay. Thanks for the clarification.
Click to expand...
Click to collapse
That was actually why I created this thread, I had already read your post but this wasn't kitkat so I wasn't sure.
SteveMurphy said:
The easiest way is to download AJK 4.9 mic swap and an i777 modem.
Download the rom you want and install it in recovery like this:
1. Full wipes, including /system
2. ROM
3. AJK 4.9 Mic Swap
- reboot recovery and follow the install instructions to the letter, from AJ's OP
4. Install modem
-reboot system-
That's it, Samsung roms are extremely easy to port. Flashing AJK will also correct your button layout.
---------- Post added at 04:49 PM ---------- Previous post was at 04:43 PM ----------
That is true, but the roms he wants isn't installed in quite the same way as the one you wanted. On his there's no updater script to edit - it's pretty much wipe-flash-flash-flash.
Click to expand...
Click to collapse
Thanks a lot for your help! Will try to use that procedure. I wasn't sure about the button layout or even bootloader (which I just read it isn't usually included in i9100 roms, so I'm fine), thanks for clarifying that. But first I have to solve a usb connection problem I have, in case I break anything and I have to use Odin. Defective dock connector replacement, ugh.
Thanks again!
a_lleras said:
...I wasn't sure about the button layout or even bootloader (which I just read it isn't usually included in i9100 roms, so I'm fine)...
Click to expand...
Click to collapse
Don't make assumptions. Before you flash an I9100 rom, open the zip file and look for boot.bin and sbl.bin and possibly param.lfs. If any of those are present, then remove them if you know how, or use another firmware that does not have those.
azeem40 said:
Ah okay. Thanks for the clarification.
Click to expand...
Click to collapse
SteveMurphy said:
The easiest way is to download AJK 4.9 mic swap and an i777 modem.
Download the rom you want and install it in recovery like this:
1. Full wipes, including /system
2. ROM
3. AJK 4.9 Mic Swap
- reboot recovery and follow the install instructions to the letter, from AJ's OP
4. Install modem
-reboot system-
That's it, Samsung roms are extremely easy to port. Flashing AJK will also correct your button layout.
---------- Post added at 04:49 PM ---------- Previous post was at 04:43 PM ----------
That is true, but the roms he wants isn't installed in quite the same way as the one you wanted. On his there's no updater script to edit - it's pretty much wipe-flash-flash-flash.
Click to expand...
Click to collapse
creepyncrawly said:
Don't make assumptions. Before you flash an I9100 rom, open the zip file and look for boot.bin and sbl.bin and possibly param.lfs. If any of those are present, then remove them if you know how, or use another firmware that does not have those.
Click to expand...
Click to collapse
Sure, I always double check almost everything, kind of OCD. I read that you just said on the post too. Thanks for the warning, and for worrying.
SteveMurphy said:
The easiest way is to download AJK 4.9 mic swap and an i777 modem.
Download the rom you want and install it in recovery like this:
1. Full wipes, including /system
2. ROM
3. AJK 4.9 Mic Swap
- reboot recovery and follow the install instructions to the letter, from AJ's OP
4. Install modem
-reboot system-
That's it, Samsung roms are extremely easy to port. Flashing AJK will also correct your button layout.
---------- Post added at 04:49 PM ---------- Previous post was at 04:43 PM ----------
That is true, but the roms he wants isn't installed in quite the same way as the one you wanted. On his there's no updater script to edit - it's pretty much wipe-flash-flash-flash.
Click to expand...
Click to collapse
Would you use this method for porting something like SlimKat for i9100 over to i777?
RamblingBarba said:
Would you use this method for porting something like SlimKat for i9100 over to i777?
Click to expand...
Click to collapse
The method would be similar, but you'd have to be on a KK recovery before attempting. And the AJK kernel is not compatible with KK; you need to use RenderBroken's KK kernels for the specific rom you want. For Slim you have to use his Slim kernel (TWRP-based is recommended), a CM rom would need his CM kernel, etc.
SteveMurphy said:
The method would be similar, but you'd have to be on a KK recovery before attempting. And the AJK kernel is not compatible with KK; you need to use RenderBroken's KK kernels for the specific rom you want. For Slim you have to use his Slim kernel (TWRP-based is recommended), a CM rom would need his CM kernel, etc.
Click to expand...
Click to collapse
I noticed that about AJK after posting. I am on OmniRom and using Render's Kernel already. Thanks for the heads up. I may take a run at it this afternoon.
BTW what's up with the download for the Render kernel? All I can find are old builds. I am using the 2/04 TWRP for Omni and I can't even find it on the download page again.
RamblingBarba said:
I noticed that about AJK after posting. I am on OmniRom and using Render's Kernel already. Thanks for the heads up. I may take a run at it this afternoon.
BTW what's up with the download for the Render kernel? All I can find are old builds. I am using the 2/04 TWRP for Omni and I can't even find it on the download page again.
Click to expand...
Click to collapse
Probably best to ask him in his thread.
Q&A for [ROM][5.0][Lollipop][Official] NamelessROM 2.0 [ALPHA]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0][Lollipop][Official] NamelessROM 2.0 [ALPHA]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Anyone managed to dual boot it ?
Syden said:
Anyone managed to dual boot it ?
Click to expand...
Click to collapse
@Lukijs did
Syden said:
Anyone managed to dual boot it ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=56742439&postcount=41
I think this ROM is for I9300 and not for the I9305
Lukijs said:
http://forum.xda-developers.com/showpost.php?p=56742439&postcount=41
Click to expand...
Click to collapse
OK, can you please point me to a guide to dual booting. Did you put this ROM as 1st rom or 2nd?
error during instalation
Cannot mount /data device or data are busy ...
Help..
prabhjots said:
OK, can you please point me to a guide to dual booting. Did you put this ROM as 1st rom or 2nd?
Click to expand...
Click to collapse
As you can see in screens, kitkat is 1st and Lollipop is 2nd rom ..go to arter97 kernels thread and check last 2 pages I think, there was guide
rom issue
hi
if i flash rom from recovery, phone always restart and not booting
but if i flash arter kernel phone boots
but statusbar now showing
wifi not connecting
sd card not working
thanks
few problems
There is problem while connecting to a wifi, its not getting connected....
using mobile data which shows connected but unable to load either in web briwser or play store....
but the rom is awesome great work...
fix the issues soon...
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
pouya06 said:
hi
if i flash rom from recover phone always restart and not booting
but if i flash arter kernel phone boots
but statusbar now showing
wifi not connecting
sd card not working
thanks
Click to expand...
Click to collapse
try with stock kernel it will take 5-10 minutes to boot but everything working except networks
Well after reading all the posts I decided to test it. First of all, I'm no developer. Here's what I did;
1. Did "Wipe to install a new ROM" from philz
2. Installed ROM
3. Installed Gapps.
That's pretty much it for everyone who keeps asking how to install it -_- and the first boot took about 10 minutes for some reason.
As for bugs, I still haven't experienced a single issue except for the keyboard problem which I fixed by enabling hardware keyboard from settings. Everything works smooth as silk :')
Just sharing my results because of all the negative posts..
Great work devs!
I tried to install that rom (which looks amazing by the way) but when I reboot my device after install it just shows the bubbles and restarts.
I replaced a recovery (from ClockWorkMod to Philz) but it still exists.
what can I do?
Thanks.
mohitc6 said:
There is problem while connecting to a wifi, its not getting connected....
using mobile data which shows connected but unable to load either in web briwser or play store....
but the rom is awesome great work...
fix the issues soon...
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
try with stock kernel it will take 5-10 minutes to boot but everything working except networks
Click to expand...
Click to collapse
i do this , but not work at all!
phone just shows the bubbles and restarts
found a slove, download arter97 kernel (5.0 version) and flash it after installing the rom and gapps.
TheAia said:
found a slove, download arter97 kernel (5.0 version) and flash it after installing the rom and gapps.
Click to expand...
Click to collapse
That works too but I don't know I didn't have to flash his kernel. I just installed the ROM and the default kernel it came with :/ Glad it's working for you :3
Still can't have the Wi-Fi working.
Sent from my GT-I9300 using XDA Free mobile app
I gave up trying after my battery became near empty from 90%. I am getting home screen without status bar and lockscreen if i flash with arter's kernel otherwise just bubbles and bootloop. Few managed to getting the rom work, Does previous rom and recovery(i am using latest twrp) have anything to do with this?
problem
hi what can i do i have boot loop in boot animation?
Lukijs said:
http://forum.xda-developers.com/showpost.php?p=56742439&postcount=41
Click to expand...
Click to collapse
Hi,
Can I dual boot this with s5 mini v6.1 (TouchWiz android 4.4 4) using arter kernel ?
When flashing I get error sth like : cannot mount ext4 .... device or file busy .
Q&A for [ROM][5.0.2][12-04-2015] SlimSaber [UNOFFICIAL SlimLP]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][12-04-2015] SlimSaber [UNOFFICIAL SlimLP]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nice :good:
Some time ago i was using SlimSaberKat by @fusionjack and later CM11 by @Markox89 as a daily driver. But then the demand for lollopop pushed me forward to leave those great roms.
Currently I am on Omni 5.1 and it is much smoother than 5.0 . SlimLP 5.1 is imo only a matter of time and patience. See this post on slim's google+-page: https://plus.google.com/+SlimromsNet/posts/ffGnX4gXrbN
I will try it when it's ready
when will you go for 5.1
Error while restoring /system
Hello. I stuck on logo and followed the steps to fix it. But now i cant restore my files. Any fix ?
ivelin123 said:
Hello. I stuck on logo and followed the steps to fix it. But now i cant restore my files. Any fix ?
Click to expand...
Click to collapse
Screenshot needed please. What is the actual error displayed when restoring /system? Perhaps you could flash back to android 4.4.4
---------- Post added at 07:27 PM ---------- Previous post was at 07:24 PM ----------
batestota said:
when will you go for 5.1
Click to expand...
Click to collapse
Just give slimroms some time. They haven't updated the base code for a while now (and are still working on 5.1 lollipop), and they are still trying to fix many current issues with slimLP alpha.
The rom not start. I whait 15 minute on the logo, but nothing.
I have use all clean and downloading the rom 2 times..
Memory leak is fixed in latest version?
oczkers said:
Memory leak is fixed in latest version?
Click to expand...
Click to collapse
No, not yet.
TeamViewer
warrior1208,
This rom is awesome, i have one problem, i can´t have acess to TeamViewer Addon, can someone explain to me how i can this addon working to have acess to my cellphone screen?
Thanks.
Regard's,
JASSS
Bug
Enabled device heats up during charging. How to solve this problem?
Best ROM so far
I've been using all of the LP roms from xda section and all of them are still unstable(SlimLP also) but I didn't have any issues with Slimsaber.
Come from JB
Hello my current rom is JB . What do I need to instal before your rom ?
keyboard crashed
Hi!
I migrated from SlimSaber 4.4.4 3.0.80SlimKernel+ (the perfect ROM!) and resized partions (4,5+9). Wiped... wiped..wiped. Clean installation.
Keyboard AOSP doesn't work. TRWP was loosed.
What's wrong?
Thank you.
vitfain said:
Hello my current rom is JB . What do I need to instal before your rom ?
Click to expand...
Click to collapse
You need to have a kitkat compatible recovery, and just follow the steps in the OP. And of course root access
uno mas said:
Hi!
I migrated from SlimSaber 4.4.4 3.0.80SlimKernel+ (the perfect ROM!) and resized partions (4,5+9). Wiped... wiped..wiped. Clean installation.
Keyboard AOSP doesn't work. TRWP was loosed.
What's wrong?
Thank you.
Click to expand...
Click to collapse
I have had this issue once or twice. You can download another keyboard .apk(from market) and put it into /system/app manually using something like root explorer. You will need to set the permissions doing it this way. Or you could try doing a full wipe and reflashing the rom.
The recovery is in the kernel that comes with the rom. If you want TWRP back you would have to flash a custom kernel such as apolo.
PUK
Newest build, but PUK bug is still here. At least for me.
Every time i restart my phone it says sim card is locked. I enter PIN, then the phone asks to enter PUK, after entering PUK it lets me to enter new pin code, which is kind of annoying. Any ideas why this bug still occurs?
Nice ROM!
smason said:
Nice ROM!
Click to expand...
Click to collapse
Thanks! I'll update to 5.1.1 on 6th of June!
Regards!
Xposed will work on 6th build?
@warrior1208 will xposed work on the 6th june build? Because I'm using SlimLP for now because xposed works on it but I want to change to SlimSaberLP but my only concern is if xposed working or not?
akiwiz said:
@warrior1208 will xposed work on the 6th june build? Because I'm using SlimLP for now because xposed works on it but I want to change to SlimSaberLP but my only concern is if xposed working or not?
Click to expand...
Click to collapse
I'll build the ROM tomorrow, will also try XPosed on it. I'll state it in the development thread. See you there tomorrow!
still waiting a new build
***Posting this on behalf of CM developer, @dhacker29 , for this device***
Source can be found at https://github.com/CyanogenMod
This is a unified build for the Nexus 6
To build CyanogenMod for yourself you can follow http://wiki.cyanogenmod.org/w/Build_for_shamu
If you'd rather not extract files from the latest CyanogenMod build you can add vendor.xml to your .repo/local_manifests folder.
Details on Installing and downloading CyanogenMod can be found here: http://wiki.cyanogenmod.org/w/Shamu_Info
Official nightlies can be downloaded here: http://download.cyanogenmod.org/?device=shamu
Gapps: http://wiki.cyanogenmod.org/w/Gapps
Known Issues: http://wiki.cyanogenmod.org/w/Known_Issues_page_for_shamu
Changelog: http://www.cmxlog.com/12.1/shamu/
Before you post a bug report:
Please ensure you have done a full wipe of data and formatted system under Mounts and Storage.
If you have flashed parts for other versions you may need to do a full flash of the factory software for your model and start clean.
Do not report bugs in nightlies to jira.cyanogenmod.org
Enjoy!
Well this is fun!
Glad to see something official from the team in the Nexus 6 forums, thank you.
Nice to see!
Not sure what happened. There is no official nightly build since the last one 06/18. Hopefully, there will be new one soon.
What should be? Build 19:05 aboard Because a build error, you can always check Jenkins. And on 20.05 no build for any device. Maybe some work on the server, or else.
Edit: Jenkins Build now 21-05 Nightlys
cN anyone tell me what kernel to use with cm12.1 to stay decrypted
Sent from my Nexus 6
dkotoric said:
cN anyone tell me what kernel to use with cm12.1 to stay decrypted
Sent from my Nexus 6
Click to expand...
Click to collapse
Zen Any Kernel, top name but one.
Sent from my Nexus 6 using Tapatalk
micmars said:
Zen Any Kernel, top name but one.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
doesnt work for me system UI keeps crashing
Sent from my Galaxy S6
dkotoric said:
doesnt work for me system UI keeps crashing
Sent from my Galaxy S6
Click to expand...
Click to collapse
Which version...V21, RC2, folks indicated zero issues with this rom.
Sent from my Nexus 6 using Tapatalk
Rule #1 of cm nighltlies is its going to break compatibility with kernels randomly
Wait for the Dev to update the kernel or flash an older nightly
Yay for official CM12.1! :good:
I've tried to clean flash CM 12.1 and disable encryption but I haven't had any luck.
My process:
1. Factory reset in TWRP 2.6.1
2. Wipe System, Data, Cache, Dalvik individually
3. Flash CM Nightly
3. Flash Full Slim Gapps
3. Flash Leankernel
4. Flash SuperSU because I prefer it
After a lengthy boot it still says "Encrypted" under Security in Settings.
What am I missing? I don't need to wipe the SD card too, right?
Thanks!
akanealw said:
I've tried to clean flash CM 12.1 and disable encryption but I haven't had any luck.
My process:
1. Factory reset in TWRP 2.6.1
2. Wipe System, Data, Cache, Dalvik individually
3. Flash CM Nightly
3. Flash Full Slim Gapps
3. Flash Leankernel
4. Flash SuperSU because I prefer it
After a lengthy boot it still says "Encrypted" under Security in Settings.
What am I missing? I don't need to wipe the SD card too, right?
Thanks!
Click to expand...
Click to collapse
Format internal storage .
---------- Post added at 04:56 AM ---------- Previous post was at 04:55 AM ----------
pantmunu said:
Format internal storage .
Click to expand...
Click to collapse
Make sure u back up tho .. And save it to a PC .
---------- Post added at 04:57 AM ---------- Previous post was at 04:56 AM ----------
pantmunu said:
Format internal storage .
---------- Post added at 04:56 AM ---------- Previous post was at 04:55 AM ----------
Make sure u back up tho .. And save it to a PC .
Click to expand...
Click to collapse
Flash cm and then format internal storage.
So not just the data partition then, I need to backup and wipe all partitions?
SystemUI fc
I've been flashing nightlies regularly with leanKernel to stay decrypted.
The last one working for me is the one from May 12th.
Every other one I've tried since then ends up with SystemUI stuck in a FC loop on startup.
akanealw said:
So not just the data partition then, I need to backup and wipe all partitions?
Click to expand...
Click to collapse
Yup.
---------- Post added at 06:09 AM ---------- Previous post was at 06:07 AM ----------
akanealw said:
So not just the data partition then, I need to backup and wipe all partitions?
Click to expand...
Click to collapse
Do this .. Wipe as you would normally do . flash the ROM. Flash lean and format internal storage. That way u might actually boot unencrypted so u can download gaps straight to your phone.
xtzz said:
I've been flashing nightlies regularly with leanKernel to stay decrypted.
The last one working for me is the one from May 12th.
Every other one I've tried since then ends up with SystemUI stuck in a FC loop on startup.
Click to expand...
Click to collapse
can u post a mirror of the 05/12 nightly, the downloading links are broken for the older ones on cm site
Sent from my Galaxy S6
I hardly doubt that - it's not on my phone anymore.. will check if I have it somewhere at home, when I'm back.
Google it around.
I'm running CM12.1 build 5/17 with leanKernel 1.8.5 with no FCs.
I have CM12.1 build 5/9 if anyone wants that.
Q&A for [KERNEL][UNOFFICIAL][PERSONAL BUILDS]DorimanX KK 4.4.4
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][UNOFFICIAL][PERSONAL BUILDS]DorimanX KK 4.4.4. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
gsstudios, thanks for your hard work! Just want to ask do you have any plans to merge stelistcristi sources who already made some work about new wifi drivers and some other things?
Tacio said:
gsstudios, thanks for your hard work! Just want to ask do you have any plans to merge stelistcristi sources who already made some work about new wifi drivers and some other things?
Click to expand...
Click to collapse
I might do that. Still trying to solve problems first
@gsstudios...first thanks for your hard work man:thumbup:...your kernal is stable with slimsaber 4.4.4...I use it for 7days...great battery backup better then stock ROM...now you released v11 beta..can I install it over v10 or I'll wait for stable version...
vickymbbs said:
@gsstudios...first thanks for your hard work man:thumbup:...your kernal is stable with slimsaber 4.4.4...I use it for 7days...great battery backup better then stock ROM...now you realised v11 beta..can I install it over v10 or I'll wait for stable version...
Click to expand...
Click to collapse
I've been testing it now for about 2 hours now and it's working flawlessly. You can flash it now if you want.
gsstudios said:
I've been testing it now for about 2 hours now and it's working flawlessly. You can flash it now if you want.
Click to expand...
Click to collapse
OK..fine then I try it
---------- Post added at 02:06 PM ---------- Previous post was at 01:55 PM ----------
Can I use your profile you posted in http://forum.xda-developers.com/showthread.php?p=58341128 or I'll stay with stock setting???
vickymbbs said:
OK..fine then I try it
---------- Post added at 02:06 PM ---------- Previous post was at 01:55 PM ----------
Can I use your profile you posted in http://forum.xda-developers.com/showthread.php?p=58341128 or I'll stay with stock setting???
Click to expand...
Click to collapse
It's best to stay with stock settings. Have optimized them and using these settings as my daily driver. I will hopefully improve the profiles soon.
gsstudios said:
It's best to stay with stock settings. Have optimized them and using these settings as my daily driver. I will hopefully improve the profiles soon.
Click to expand...
Click to collapse
Do you think Hyper is the best Governor for a good battery life combined with quite good performance?
regards
j1gga84 said:
Do you think Hyper is the best Governor for a good battery life combined with quite good performance?
regards
Click to expand...
Click to collapse
Hyper scales more aggressively than ondemand or pegasusq, but because of this, it is very stable and smooth. Pegasusq and ondemand has the occasional lags, but battery life is unmatched. You either going to compromise something in order to gain something else. Personally hyper is best for me, neox/pegasusq/ondemand are the only other good options we have.
Hi. I have been using Gustavo_s "kk-kernel-04-02-TWRP-TRIM" on CM11 Weekly which has trim enabled, never runned fstrim. It has been working flawless.
Your kernel should work just fine wright? Is your kernel CWM or TWRP recovery?
g3lux said:
Hi. I have been using Gustavo_s "kk-kernel-04-02-TWRP-TRIM" on CM11 Weekly which has trim enabled, never runned fstrim. It has been working flawless.
Your kernel should work just fine wright? Is your kernel CWM or TWRP recovery?
Click to expand...
Click to collapse
without running an app such as fstrim or Trimmer (fstrim) what I like more, your system is not trimmed. Only installing an kernel that brings TRIM support does not mean that everything is trimmed after flashing the kernel
Dorimanx is custom CWM 6.0.4.8
regards
Hello, just a question about this kernel. Why is it that every time I flash it, I cannot access the internal storage (sdcard0)? I do fine with Apolo but all DorimanX kernels I use this always happens Does it have something to do with the size of the partitions?
goodybags said:
Hello, just a question about this kernel. Why is it that every time I flash it, I cannot access the internal storage (sdcard0)? I do fine with Apolo but all DorimanX kernels I use this always happens Does it have something to do with the size of the partitions?
Click to expand...
Click to collapse
Let me guess, your internal storage is formatted as ext4 right? This is a known problem with dorimanx kernel, I need to talk to the real developer to fix this. A temporary fix would be to format internal SD card to fat32 or some other filesystem, that way all kernels should work after that. Make sure to back up.
Ah thank you! I can format it with CWM/TWRP right? but I would lose all my data, correct?
goodybags said:
Ah thank you! I can format it with CWM/TWRP right? but I would lose all my data, correct?
Click to expand...
Click to collapse
Yes, you will lose your data, that's why a backup is recommend. You can format in CWM or in TWRP.
Screen brightness TROUBLE
Hey...i've done instaled Dorimanx on my Galaxy S2 CM11
Everything It's Ok but i have problem on brightness...
auto screen brightness + slider error....
the screen always full bright ..
Please Help..
Thanks
G_Ban said:
Hey...i've done instaled Dorimanx on my Galaxy S2 CM11
Everything It's Ok but i have problem on brightness...
auto screen brightness + slider error....
the screen always full bright ..
Please Help..
Thanks
Click to expand...
Click to collapse
Have you tried reflashing the kernel? Does this occur on other custom kernels as well?