i just installed Rataplan v6.0.The phone cant be carrier unlocked.I tried to reflash and it says phone not found.Tried to reflsh in NAND mode but it says "phone is in wrong mode".It cant connect to NSS pro nor to Nokia care suite.Now what to do?
Related
I had on the phone 1600.3013.8107.11502. Then I update to 1600.3015.8107.12070. I did it by the refurbish option in the NCS. One month later i wanted to flash on 1600.3030.8773.12120
When i plug phone, the computer detected it other than ever. I saw Qualcomm CDMA Technologies MSM and removable disk with question about formatting. I clicked cancel but NCS does not detect the phone. My computer couldn't install driver for Qualcomm CDMA Technologies MSM. I tried it on others computers but on all its the same, i can't flash this ****. I was looing for solution on others forums but no one can help with this.
Thx for answers.
You have the Qualcomm bootloader. NCS does not recognize this bootloader. I f you want NCS to recognize your device, you will need the NOKIA DLOAD bootloader. However, the Qualcomm is the unlocked one, so depending on your preferences, you can leave it on the Qualcomm. With the unlocked bootloader (which you have) you will only need an other flashing method. Those can be found on the forums here.
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
i have amlmost same problem, but my phone is dead, when i turn it on it stays ond nokia screen
Shuyn18 said:
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
Your cellphone is working?
I downloaded NSS but it doesn't detect my phone
And if i had the Qualcomm bootloader,How do i go in recovery?
just want to make a nand backup for a friend and root his stock phone.
I own a sgs+ with a custom rom of andoid so i'm noob at wp.
thx,
Shuyn18 said:
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
If you have this error, please check if the phone restarts in this step or just
stays in Normal mode (windows screen). There are some software versions that
will not respond to the OSBL change command. So just try to flash different
version (via .nb file) and try again.
The other option is the manual restore(hex edit), but its really risky if you don't know
what are you doing.
The problem seems to be caused by version mismatch between the OS and the
baseband firmware. Here the solution and more info.
I also has a problem like: "Are you sure you have development Qcom loader"
when trying to flash rainbow mod FW by lucifer to my lumia 710 using NSS pro v0.48. Does anyone has a same problem with me? all steps that told in http://forum.xda-developers.com/showthread.php?t=1620629 i already been followed. but still i can't flash the FW mod, FYI I already succeed in installing FW with qualcom bootloader before using NSS pro.
Cheers
Hi,
I've been trying to unlock my Lumia 710 from wind and I'm having a few problems.
What I've done.
- I have QUALCOMM bootloader, since I get the format disk popup in windows.
- Flashed WP Rainbow Mod 7.8 Custom Rom: http://forum.xda-developers.com/showthread.php?t=1654415 using Nokia Lumia 710 Downloader (http://forum.xda-developers.com/showthread.php?t=1665821)
- Installed Zune (I guess drivers as well), Nokia Care Suite (WinUSB Drivers for x64), QUALCOMM Drivers (http://forum.xda-developers.com/showthread.php?t=1669498)
- Downloaded NssPro v0.52
- Followed this tutorial to set-up NssPro for WP7: http://forum.xda-developers.com/showthread.php?t=1721355
What's wrong
- When running NssPro, using the detect button the program says phone not found (yes, its in OSBL mode.), and if I click out I get a pop up saying Nokia Care Suite stopped responding and the program crashes.
Images:
- Phone not Found: http://i.imgur.com/bmcAI.png
- Crashed: http://i.imgur.com/j4Efn.png
I'm running Windows 8 x64.
If anyone could point out what I'm doing wrong would be great.
Thanks,
Karn.
I have your same problem and posted here a question but no one answer me
i hope some one can help us
mine was a orange brand lumia
now i have a raimbow mod
finally i figure out
the problem is on QUALCOMM Drivers
you don't have to install notting just put inside nss pro the correct driver
i don't know if i can post files or other
if cannot send me a pm and i send you a link
i successfull sim unlocked my 710 but now even if
i have network coverage when i try to call it disconnect the call
Hey,
Could you explain this to me in detail.
Thanks.
Ariakan said:
finally i figure out
the problem is on QUALCOMM Drivers
you don't have to install notting just put inside nss pro the correct driver
i don't know if i can post files or other
if cannot send me a pm and i send you a link
i successfull sim unlocked my 710 but now even if
i have network coverage when i try to call it disconnect the call
Click to expand...
Click to collapse
run it in administrator mode and compatibility windows 7.
My original Vodafone Spain branded Nokia Lumia 800 had no problems at all since today. I have never tried to unlock it and has always installed the official updates through Zune.
Today I've received the notification for the 7.8 update! Yay! I started the installation through Zune (as always). Everything was ok: steps 1 trough 5 (downloading, transferring, etc.). And then, step 6: rebooting the phone. It rebooted, but the usual "do not unplug" icon didn't show. Instead, the screen was blank and Zune was waiting endlessly for the phone to reboot. A notification came through windows saying that the removable drive must be formatted, which I DIDN'T do. The device manager was showing a "Qualcomm MMC Storage USB device" along with another one with a yellow asterisk.
Searching the internet I found that my phone has a special Bootloader, which was not supposed to be available to the final users.
I know many people here would love to have the Qualcomm Bootloader, but what I would like right now is to have the standard DLOAD Bootloader!
So here is my question: is it possible to restore the phone to the standard DLOAD mode so I could install the 7.8 update through Zune?
I've tried installing the Qualcomm drivers, which installed flawlessly. Now I have no yellow asterisks, but a new COM port ("Qualcomm HS-USB Diagnostics 9006 (COM5)"), but Zune is still waiting for my phone to reboot....
UPDATE: I have tried with "Seven-Eighter" by Windows Phone Hacker wit the same result. Obviously is an issue related to the bootloader of my phone.
NOTE TO THE ADMINS: Should I better post this in the "Lumia 800 Windows Phone Development " section?
I've finally found the solution!
Just hold the camera button when Zune restarts the phone. Then the usual "do not unplug" screen appears and the process continues flawlessly.
Hi,
For lumia 800 - only way to change boot-loaders is through Test Points and ATF Flasher.
BR
Hey Help needed instantly
I have qualcomm bottloader ( not now ) of lumia 800. I restore Nokia DLOAD from qualcomm successfull but phone does not boot even not vibrates.
I tried nokia care suite for dead phone flashing but always says CONNECTION LOST TO DEVICE .
How can i recover bootloader or flash a ROM ?
Thank You.
Hi everyone, It is 2020 but i still love my lumia 920 windows 10 insider preview,
Many days ago i tried to roll back to windows 8.1 using WDRT but it got failed a few per cent.
when i tried again it showed in device manager as NOKIA FLASH and could not be detected in WDRT. i tried to click "My device is not detected" but detected as Unknown Manufacturer, after awhile it started to download the packages for my bricked lumia 920. but after clicking INSTALL SOFTWARE the process ended with failure.
i tried to flash using WPinternals but this is lock bootloader so i could not flash it.
tried to find many forums and websites but i got nothing.
i love my lumia 920 and want to revive it back.
Please anybody help me to fix my bricked lumia with red screen?
many thanks for everyone.
r u still there?? just thor2/wpinterals to flash a ffu
don't use wdrt,it causes problems(anyway,it breaks chinese version phones rm-822)