Some one Please Help Me
Am Stuck in YGDP Flash tool , It fails in 98 %
10:07:26 CELL0: Check between YL-Parames Partition and PhoneInfo Failed.
10:07:26 CELL0: Check YL-Parames Partition Failed, The CPB is not for the Phone.
Please Anyone Help Me
Am also not getting the recovery mode ......
Plzz help me...........
which cpb file using , tell me full name
thprock said:
which cpb file using , tell me full name
Click to expand...
Click to collapse
4.4.012.p1.141110.8297w_i02.cpb
Helloo ,
Some One Please Help Me
My Phone is Bricked.
From where did you get this rom?
I downloaded the stock rom from needrom and its name is 4.4.012.P1.141110.8297W_I02.CPB and yours have 4.4.012.P1.141110.8297W_i02.CPB. For me it is working without any error.
Try downloading stock from needrom and try that one.
shaijuvjohn said:
From where did you get this rom?
I downloaded the stock rom from needrom and its name is 4.4.012.P1.141110.8297W_I02.CPB and yours have 4.4.012.P1.141110.8297W_i02.CPB. For me it is working without any error.
Try downloading stock from needrom and try that one.
Click to expand...
Click to collapse
I Also Tried the rom from need rom
But no luck
anujith said:
I Also Tried the rom from need rom
But no luck
Click to expand...
Click to collapse
Did you tried it without battery?
If not just try connect phone without battery.
shaijuvjohn said:
Did you tried it without battery?
If not just try connect phone without battery.
Click to expand...
Click to collapse
Yes am try with and without battery
but no luck
anujith said:
Yes am try with and without battery
but no luck
Click to expand...
Click to collapse
http://www.mediafire.com/download/ofea46fgqhci438/www.moulnisky.com_4.4.012.P1.141110.8297W_I02.rar
Try this one, dont know both are same files or not.
shaijuvjohn said:
http://www.mediafire.com/download/ofea46fgqhci438/www.moulnisky.com_4.4.012.P1.141110.8297W_I02.rar
Try this one, dont know both are same files or not.
Click to expand...
Click to collapse
Tried But Not Working
Please Help Me
anujith said:
Tried But Not Working
Please Help Me
Click to expand...
Click to collapse
What is it showing? Same error??
shaijuvjohn said:
What is it showing? Same error??
Click to expand...
Click to collapse
same error
10:07:26 CELL0: Check between YL-Parames Partition and PhoneInfo Failed.
10:07:26 CELL0: Check YL-Parames Partition Failed, The CPB is not for the Phone.
anujith said:
same error
10:07:26 CELL0: Check between YL-Parames Partition and PhoneInfo Failed.
10:07:26 CELL0: Check YL-Parames Partition Failed, The CPB is not for the Phone.
Click to expand...
Click to collapse
Dont know what is going on.
shaijuvjohn said:
Dont know what is going on.
Click to expand...
Click to collapse
i used sp flash tool but there is another error
da_jump_start_failed
anujith said:
i used sp flash tool but there is another error
da_jump_start_failed
Click to expand...
Click to collapse
Try installing drivers and ygdp tool in another system and flash. I too had some problem in my desktop that my phone was not detecting in ygdp tool and after i installed all in my laptop and it worked. In my desktop it was working fine before, but i dont know what happened, after my phone became in boot loop it was not detecting in ygdp.
I think sp flash tool do not work properly for mmx a311, dont know exactly.
@anujith here is stock a311 rom flashable via twrp recovery
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008
I m also facing the same problem. Stuck in 98%. Download the rom from needrom and mediafire and all other websites same files. But same result. Stuck in 98%. Got angry on the laptop... please help me.. i want to know this procedure if any faults occur it will help me flash the file
https://androidmtk.com/download-micromax-stock-rom-models
Try the rom from this page..i think it will help you..
I already download it and flash the rom via pcs and laptops everything stucks in 98%. I cant use my mobile... i lost my money becoz of this. So please anyone help.. send clear procedures or make video on it. Please
Sent from my HTC Desire 820G PLUS dual sim ported by Krishan Kumar using XDA-Developers mobile app
hi i am raja. phone model nitro a311. mai phone ko flash kar raha hun ygdp tool se. or flash 100% ho raha hai....fir v phone on nahi ho raha hai...micromax logo pe stop ho jata hai....aab mai kya karu
Related
hi friends, i tried installing CWR on my huawei ascend g610-u20 but unfortunately the phone went into bootloop . pls help out
funloft said:
hi friends, i tried installing CWR on my huawei ascend g610-u20 but unfortunately the phone went into bootloop . pls help out
Click to expand...
Click to collapse
if you get full backup before install cwm, you should flash boot.img and recovery.img with sp flash tool (write memory way).
If you dont have any backup than you can download any u20 rom from huawei web site and extract boot.img and recovery.img with huawei extract tool(google this "huawei extract xda") than flash it sp flash tool in write memory section.
sp flash tool error
i even tried to flash a firmware using sp flash tool but i keep getting error " TO FORMAT CODE AREA IS FORBIDDEN ON THIS PHONE"
Pls help me out......
funloft said:
i even tried to flash a firmware using sp flash tool but i keep getting error " TO FORMAT CODE AREA IS FORBIDDEN ON THIS PHONE"
Pls help me out......
Click to expand...
Click to collapse
can you access write memory section in your sp flash tool program?
huawei g610-u20 bootloop
George Jetson said:
if you get full backup before install cwm, you should flash boot.img and recovery.img with sp flash tool (write memory way).
If you dont have any backup than you can download any u20 rom from huawei web site and extract boot.img and recovery.img with huawei extract tool(google this "huawei extract xda") than flash it sp flash tool in write memory section.
Click to expand...
Click to collapse
i dont have a full backup but a firmware from the internet which is giving me error using sp flash tool, i'll like if you can help me with the link to download the firmware from huawei website. thanks
sp flash tool error
George Jetson said:
can you access write memory section in your sp flash tool program?
Click to expand...
Click to collapse
yes, but it is asking me for raw data file....
funloft said:
i dont have a full backup but a firmware from the internet which is giving me error using sp flash tool, i'll like if you can help me with the link to download the firmware from huawei website. thanks
Click to expand...
Click to collapse
Here is the link for stok rom u20
http://www.needrom.com/mobile/huawei-g610-u20/
huawei g610-u20 bootloop
the rom there is u20 with build B116, but the build for my phone is B121.... hope it will not affect?
huawei g610-u20 bootloop
please guys, help me out
FIXED
finally!! i fixed my phone..................
thanks to george jetson and XDA as a whole
i downloaded this firmware
G610-U20_V100R001C00B121_Firmware_Egypt
i flashed all files in it EXCEPT the preloader file using SP FLASH TOOL
And now my phone is back and running............
i don't think i will try custom roms/ recovery again..:laugh:
LOL
invalid IMEI
now i have issues with INVALID IMEI after flashing the STOCK ROM and i don't have the backup of my IMEI....
i"ve tried the MAUI 3G software but it didn't work oooo
likewise SN writer...
any help please............
Hello Friend
I was in error
nand flash not found
hellllllllllllllp me plzzz gays
need g610-u20 frimwaer for sp tool
bro plz give me a link for g610-u20 frimwaer for sp tool
lifegood8 said:
bro plz give me a link for g610-u20 frimwaer for sp tool
Click to expand...
Click to collapse
I can't post links yet, but you can Google it. Try typing "Huawei G610 U20 Needrom". You'll get links from Needrom.com, try look. Imgg for those. Once you're in the website, you'll most probably end up under G610's category. Try looking for the ones that say "official".
For you to extract the update.app file, try googling "Huawei Update.app extractor". The link you should look for should be from XDA Developers. You can then use it to extract the update.app file so that you can flash the .img files using SP Flashtool.
---------- Post added at 05:56 AM ---------- Previous post was at 05:50 AM ----------
funloft said:
now i have issues with INVALID IMEI after flashing the STOCK ROM and i don't have the backup of my IMEI....
i"ve tried the MAUI 3G software but it didn't work oooo
likewise SN writer...
any help please............
Click to expand...
Click to collapse
You can try using the Engineer Mode. Dial *#*#3646633#*#*, then swipe to the right until you're under "Connectivity" tab. Once you're there, go to "CDS Information".
funloft said:
finally!! i fixed my phone..................
thanks to george jetson and XDA as a whole
i downloaded this firmware
G610-U20_V100R001C00B121_Firmware_Egypt
i flashed all files in it EXCEPT the preloader file using SP FLASH TOOL
And now my phone is back and running............
i don't think i will try custom roms/ recovery again..:laugh:
LOL
Click to expand...
Click to collapse
You did a great job fixing your device. I would just like to ask, how were you able to flash using SP Flash Tool? I'm trying to fix my phone's IMEI because I think its NVRAM is corrupted. I'm trying to flash a decompiled boot.img to my phone but it keeps giving me an error. Can you help me with this?
ouro898 said:
You did a great job fixing your device. I would just like to ask, how were you able to flash using SP Flash Tool? I'm trying to fix my phone's IMEI because I think its NVRAM is corrupted. I'm trying to flash a decompiled boot.img to my phone but it keeps giving me an error. Can you help me with this?
Click to expand...
Click to collapse
i downloaded that egypt firmware and everything needed is found inside............
but i'm still stuck with the invalid imei problem which i will like to beg some gurus here to help us with.............
funloft said:
i downloaded that egypt firmware and everything needed is found inside............
but i'm still stuck with the invalid imei problemwhich i will like to beg some gurus here to help us with.............
Click to expand...
Click to collapse
Oh. I think my only option now is flashing the partition where the NVRAM is located to fix it because, so far, none of the available methods of restoring it works. I'll have to re-root my phone, I guess.
ouro898 said:
Oh. I think my only option now is flashing the partition where the NVRAM is located to fix it because, so far, none of the available methods of restoring it works. I'll have to re-root my phone, I guess.
Click to expand...
Click to collapse
Ok then! Goodluck.... please let me know in case u finally get a solution to the problem INVALID IMEI
funloft said:
Ok then! Goodluck.... please let me know in case u finally get a solution to the problem INVALID IMEI
Click to expand...
Click to collapse
I was actually having problems making the sp flash tool work. It won't download after I plug the device to the computer. I'm doing the whole process correctly but I'm always getting an error. Then I found out that the mt65xx driver appears very briefly in Device Manager, then disappears. This all happens after about a second. Do you happen to know how to solve this?
Use mtk droid tools !!
funloft said:
i downloaded that egypt firmware and everything needed is found inside............
but i'm still stuck with the invalid imei problem which i will like to beg some gurus here to help us with.............
Click to expand...
Click to collapse
RESTORE IMEI # USING THE NVRAM BACKUP !!! , in the MTK DROID TOOLS , COME OVER TO OUR THREAD FOR HUAWEI HONOR 3C
for more idea on restoring the nvram and IMEI which i accomplised
http://forum.xda-developers.com/newreply.php?do=postreply&t=2773098
Press Thanks !
Hi. i want to request for a flashable zip file of stock rom for my canvas nitro a311. Because i tried installing it via ygdp tool but can't succeed.
And i am thinking about a solution that
i have a friend who is using the same phone so can i install twrp recovery and backup his rom and the copy it to my memory card and wipe data cache and then restore the backup.
Would it help me to get back my stock rom?????
Please reply if the upper methode works
I am also facing the same problem. My phone is having bootload problem due to my foolishness. I made some changes in attributes of system/font folder and it all messed up. My phone is rooted but not has flash recovdery of cmw or others
I downloaded stock rom to flash but ygdp is not helping out? Does ygdp need to be run on XP ? i am on win10?
Please help i want my phone back ...
Is there anyway to install flash recovery on rooted phone but bricked/bootloop?
please please help ...
Thanks in advance...
No ygdp tool does not need xp just run it in compatibility mode for win 7 and also as administrator ..
But i can't flash the stock rom via ygdp
Use ygdp tool with capability as win8.there are some simple steps for supporting ygdp.you can see at our official page (pinned). That will help you.That is working for me
Sent from my Micromax A311 using XDA Free mobile app
Can u give me step by step guide for how to flash using ygdp tool..
Because i already installed adb driver and mtk preloader drivers successfully but still dont get the download icon when connect my phone wih usb cable at switched off state.
I am using a311 with twrp custom recovery and miui 7 5.10.15 rom
Thnxx in advance if u or anybody wants to help....:good::good::good:
Fisrt install USB Driver from usb for micromax through device manager , Plug usb to pc and
connect mobile withour battery with volume key up.
It will detect the phone and will show yellow mark in device manager
then press on update driver and browse the usb driver folder
let the driver install
Now install/run (Password is 369) ygdp and click config and browse the firmware file
press apply until it extract the zip
now press start and connect phone without battery
let the process complete it will take around 10 minutes
Cheers
---------- Post added at 05:20 AM ---------- Previous post was at 05:11 AM ----------
http://forum.xda-developers.com/a310/help/soft-bricked-a310-3311-internal-storage-t3158012
indyan said:
I am also facing the same problem. My phone is having bootload problem due to my foolishness. I made some changes in attributes of system/font folder and it all messed up. My phone is rooted but not has flash recovdery of cmw or others
I downloaded stock rom to flash but ygdp is not helping out? Does ygdp need to be run on XP ? i am on win10?
Please help i want my phone back ...
Is there anyway to install flash recovery on rooted phone but bricked/bootloop?
please please help ...
Thanks in advance...
Click to expand...
Click to collapse
Visit amaksevn.blogspot.com for full actual stock rom flashing video with full procedure
AmakSevn said:
Visit amaksevn.blogspot.com for full actual stock rom flashing video with full procedure
Click to expand...
Click to collapse
Thanks amamsevn ,
But i flashed the rom with no issue. I was actually flashing with battery , Removed it and now it was flashed.
Could you please help me with flashing custom recovery? I want to flash cwm or TWRP 2.8.6 on my micromax a311 . Currently i am on twrp 2.4.4 with mobile uncle but want to upgrade it.
Tried several times with lots of recoveries but all the time i lost network and i have to flash rom
Kindly help me with tool and recovery version and procedure to flash.
Thanks in advance.
that's it
Install drivers ....download ygpd....enjoy
indyan said:
Thanks amamsevn ,
But i flashed the rom with no issue. I was actually flashing with battery , Removed it and now it was flashed.
Could you please help me with flashing custom recovery? I want to flash cwm or TWRP 2.8.6 on my micromax a311 . Currently i am on twrp 2.4.4 with mobile uncle but want to upgrade it.
Tried several times with lots of recoveries but all the time i lost network and i have to flash rom
Kindly help me with tool and recovery version and procedure to flash.
Thanks in advance.
Click to expand...
Click to collapse
To Download TWRP 2.8.6 Click Here
I currently have twrp 2.4.4
Can i flash this version with mobile uncle tool??
Orr i have to first go to my stock recovery??
Hey. Please help me.. i just tried to flash cyanogenmod 12.1 final posted today but it failed...i am using twrp 2.4.4.
so i have to know if the new roms does not support the older version or i am doing somethung wrong??
i formated data,wiped cache,delvik cache,internal
then flashed the rom..but every time failed..
Please guide meeee...
AmakSevn said:
To Download TWRP 2.8.6 Click Here
Click to expand...
Click to collapse
This is not twrp v 2.8.6
It's v 2.4.4 which I already have..
AmakSevn said:
To Download TWRP 2.8.6 Click Here
Click to expand...
Click to collapse
I donwloaded TWRP 2.8.6 but not able to flash it?
Used mobile uncle which failed
Flashify Hanged
Other method plz
---------- Post added at 09:24 AM ---------- Previous post was at 09:21 AM ----------
payel123 said:
This is not twrp v 2.8.6
It's v 2.4.4 which I already have..
Click to expand...
Click to collapse
Ya I am having the same version i.e. 2.4.4 and not able to upgrade.
wanted to flash custom rom cyanogenmod-12-1 but twrp is not upgarding
which tool i should use to flash twrp 2.8.6 recovery.
payel123 said:
This is not twrp v 2.8.6
It's v 2.4.4 which I already have..
Click to expand...
Click to collapse
Its TWRP 2.8.6 payel,
I flashed with it and version is showing 2.8.6
@payel123 here is stock rom flashable zip via twrp recovery
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008
I m also has the twrp but I can't able to flash stock rom through ygdp tool I tried alot
Plzz help me
Plzz
i flashed using ygdp please help
Amal M S said:
Use ygdp tool with capability as win8.there are some simple steps for supporting ygdp.you can see at our official page (pinned). That will help you.That is working for me
Sent from my Micromax A311 using XDA Free mobile app
Click to expand...
Click to collapse
i flashed using ygdp but then stuck on factory mode scroll and bootloop please help
Hard bricked my canvas nitro.
I m dumb tried to flash a ROM at 2% battery..... everything's ded.
No recovery. No fastboot. Broken logo.bin.
Phone is detected in so flash tools... but when I flash the original firmware.. it gives me error brom_cmd_jump_da_fail... same with ygdp
.
Plx help
TSG756 said:
Hard bricked my canvas nitro.
I m dumb tried to flash....
..Plx help
Click to expand...
Click to collapse
Which ROM did you try?
Was it meant for your device?
And as far as I know if its really a hard brick you'll need JTAG for it to be recovered.
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Did your recovery mode working or not? If it is then download any custom rom, place it on your external sd card and flash it. If not get the stock and flash it through Sp flash tool
TSG756 said:
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Click to expand...
Click to collapse
Me too having the same issue and no recovery, no factory mode and either fastboot bode also not working . What do i do now ?? Any solution.. I just wanna restore it as stock one..
U will try YGDP TOOL
TSG756 said:
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Click to expand...
Click to collapse
How did you fix your phone? Micromax a311. My device keeps connecting and disconnecting when I connect to PC. Can you send link for drivers. I have .CBP file for the flash tool
reis1996 said:
How did you fix your phone? Micromax a311. My device keeps connecting and disconnecting when I connect to PC. Can you send link for drivers. I have .CBP file for the flash tool
Click to expand...
Click to collapse
Check this, may be it is helpful
https://forum.xda-developers.com/showpost.php?p=68672696&postcount=5
Bricked micromax canvas a 311
My phone is Bricked, I have installed adb, v com drivers yet the pc doesn't recognise the device, i tried both sp flash, ygdp but no use. I can hope fully boot into recovery mode but my phone is not rooted, I don't know how to install rom via recovery mode. Some one please tell me a solution
Jithin James said:
My phone is Bricked, I have installed adb, v com drivers yet the pc doesn't recognise the device, i tried both sp flash, ygdp but no use. I can hope fully boot into recovery mode but my phone is not rooted, I don't know how to install rom via recovery mode. Some one please tell me a solution
Click to expand...
Click to collapse
At most you can install a custom recovery using fastboot (google it) and then install a ROM through it
Bros...help me to unbrick My HCL me connect 3G 2.0 tab...i need the stock rom?
Deadman jo said:
Bros...help me to unbrick My HCL me connect 3G 2.0 tab...i need the stock rom?
Click to expand...
Click to collapse
Here you go :
https://docs.google.com/uc?id=0B0DGQDSsarOAdG1pd1pZTjFobE0&export=download
i need HCL me connect 3G 2.0tabs Stock recovery
Deadman jo said:
i need HCL me connect 3G 2.0tabs Stock recovery
Click to expand...
Click to collapse
Stock recovery should be included in the stock rom package unless you mean custom recovery.
MigoMujahid said:
Here you go :
https://docs.google.com/uc?id=0B0DGQDSsarOAdG1pd1pZTjFobE0&export=download
Click to expand...
Click to collapse
Bro i cant flash this rom on sp flash tool
Deadman jo said:
Bro i cant flash this rom on sp flash tool
Click to expand...
Click to collapse
As far as i know, you use mp tool not sp flash tool.
http://hulkload.com/pjj60j5hx6mt
Deadman jo said:
Bro i cant flash this rom on sp flash tool
Click to expand...
Click to collapse
this rom only flash with stock recovery im lost my stock recovery..
Flash with Digma iDND7 firmware.
Deadman jo said:
this rom only flash with stock recovery im lost my stock recovery..
Click to expand...
Click to collapse
I have one but the file is locked ... since a year now
Also I tried flashing the stock rom gives this error :
Error: Invalid partition setting
17: fat 979e8000:84de8000
installation aborted
Please help or suggest
++++++++++++++++++++++++++++++++++++
Deadman jo said:
this rom only flash with stock recovery im lost my stock recovery..
Click to expand...
Click to collapse
So there is an update I was able to successfully Flash a firmware from same board which was used by HCL me connect 3G 2.0.
I searched this for 3 days and found that Digma idnd 7 tab used the same board , so I hunted for Digma firmware and luckily got them, the file link contains both ota and Flash file via MP tool.
I tried ota update but I got the same error.
So I used MP flash tool v5.1352.01
Download adb drivers of HCL me tablet.
Extract the zip, then edit the scatter file name to "MT6577_Android_scatter_emmc".
Now open SP flash tool and choose the scatter.
Click on download and then plug the tab in using the USB.
Then I got some PMT file needs to be updated error which was fixed by the next step.
Stop the download, pull the device out, then click Format options in the 2nd tab and then "Format except Bootloader".
Plug the device in.
once the format is done, plug out again, click download(make sure scatter is selected).
Plug in the device.
It will start flashing.
File links :
HCL USB drivers : androidmtkDOTcom/download-hcl-usb-driver
SP flash links : androidmtkDOTcom/smart-phone-flash-tool
Digma original firmware : Unable to post link so : use google and search supportdotdigma
ps: may be this helps digmaDOTru/catalog/item/1344
Also you will need to change the language to English after Booting up.
Click on the equalizer>> click on icon marked A[use some common sense that's what I did xD] then inside that tap on the very , top of the submenu, you will get the option to change to English.
Please let me know if if works for you. Or you need any thing.
I am using Huawei Ascend P7 L10 ... recently i was messing up with my device using TWRP .... and i erased my internal storage unknowingly.... now it shows "no os installed" when i try to reboot using TWRP... when i do the normal reboot it gets stuck on the HUAWEI logo screen.... i tries to flash stock rom through TWRP... but it doesnt work ... please help me... ?
swaroopkrishna said:
I am using Huawei Ascend P7 L10 ... recently i was messing up with my device using TWRP .... and i erased my internal storage unknowingly.... now it shows "no os installed" when i try to reboot using TWRP... when i do the normal reboot it gets stuck on the HUAWEI logo screen.... i tries to flash stock rom through TWRP... but it doesnt work ... please help me...
Click to expand...
Click to collapse
Did you try Hard reset? In case Hard reset all data will be removed from you phone.
http://www.hardreset.info/devices/huawei/huawei-ascend-p7/
swaroopkrishna said:
I am using Huawei Ascend P7 L10 ... recently i was messing up with my device using TWRP .... and i erased my internal storage unknowingly.... now it shows "no os installed" when i try to reboot using TWRP... when i do the normal reboot it gets stuck on the HUAWEI logo screen.... i tries to flash stock rom through TWRP... but it doesnt work ... please help me... ?
Click to expand...
Click to collapse
Flash stock rom of your android via fastboot or find a custom rom for your android and flash through custom recovery
Ashwinrg said:
Flash stock rom of your android via fastboot or find a custom rom for your android and flash through custom recovery
Click to expand...
Click to collapse
I tried to flash by using twrp... but it failed...by the way .... can you please help me on how to do the flashing via fastboot ??? and a link for the stock rom ??? please ... ?
swaroopkrishna said:
I tried to flash by using twrp... but it failed...by the way .... can you please help me on how to do the flashing via fastboot ??? and a link for the stock rom ??? please ... ?
Click to expand...
Click to collapse
Download your stock rom from below link. I think how to flash also given in the zip. Follow steps carefully to recover your android.
https://firmwarefile.com/huawei-ascend-p7-l10
Ashwinrg said:
Download your stock rom from below link. I think how to flash also given in the zip. Follow steps carefully to recover your android.
https://firmwarefile.com/huawei-ascend-p7-l10
Click to expand...
Click to collapse
I have downloaded the first file.... but it shows an error while i flash it....something related to md5
swaroopkrishna said:
I have downloaded the first file.... but it shows an error while i flash it....something related to md5
Click to expand...
Click to collapse
Have you tried these files.
https://www.needrom.com/download/p7-l10/
Thanks Bro.... fastboot flashing worked perfectly.... THANJS BUDDY.... I CUDNT HAVE DONE THIS WITHOUT YOUR HELP...??
swaroopkrishna said:
Thanks Bro.... fastboot flashing worked perfectly.... THANJS BUDDY.... I CUDNT HAVE DONE THIS WITHOUT YOUR HELP...??
Click to expand...
Click to collapse
Glad to help you