Related
hi
I need your help to fix my O2 Atom Exec.
i wanted to upgrade my ROM in to the WM6, at the bigining i copied the "diskimage_Ver.nb0" & "EBOOT.nb0" on my memory card. and got my Atom Exec into the bootloader , after download complited the LCD got dark, i got it on bootloader and start the "Device Software Update Utility" and clicked on "Next" until "Upgrad" was shown.When I clicked on "upgrade" this error was shown:"CONNECTION ERROR" . What should i do to fix it?
Thanks.
I'm looking for your answer.
donot ever try thru SD card.. there is a chance that you may brick your device.
Goto bootloader mode first then u run DSUU.
Now after i did that, it dosent work with DSUU .it show "error connection".and my divice shows the upgrade fail
How many files you have in the upgrade directory? Normally it should contain 6 files:
- Device Software Update Utility.exe
- diskimage_Ver.nb0
- EBOOT.nb0
- ExtendedRom.img
- nova_pda_033105.mot
- vl1d_pda_Ver.mot
It will always shown connection error if one of these files is missing
I have all of them,
It seems feasiable to full downloadig the Rom from SD(memory card), but i need mor files:
"diskimg.nb0 , eboot.nb0 , dm.nbo , flash.img , agent.mot , mot.mot , CPLD.img , assetInf.img , extended.img , Mdoc.img"
If it's possible to upgrading with them how can i rech them ?
hello...!!!?
can enybody help me with this case? I need Your Help. Please. . . .
shaemna said:
hi
I need your help to fix my O2 Atom Exec.
i wanted to upgrade my ROM in to the WM6, at the bigining i copied the "diskimage_Ver.nb0" & "EBOOT.nb0" on my memory card. and got my Atom Exec into the bootloader , after download complited the LCD got dark, i got it on bootloader and start the "Device Software Update Utility" and clicked on "Next" until "Upgrad" was shown.When I clicked on "upgrade" this error was shown:"CONNECTION ERROR" . What should i do to fix it?
Thanks.
I'm looking for your answer.
Click to expand...
Click to collapse
Why did you do this?! No one gave out instructions to flash anything using SD CARD in the first place! Of course you will get connection error because bootloader is not functioning. Remove your SDCard, start bootloader mode, and flash the normal way.
I did that but it's not worked. and got me "error connection", i saw some where that if i do it in the that way (with sd) it's worke and beacuse of that i did it in that wey, now what should i do? how can upgrad my ROM or downgrad it, my divice is alredy ded, how can i get it alive? help me
shaemna said:
I did that but it's not worked. and got me "error connection", i saw some where that if i do it in the that way (with sd) it's worke and beacuse of that i did it in that wey, now what should i do? how can upgrad my ROM or downgrad it, my divice is alredy ded, how can i get it alive? help me
Click to expand...
Click to collapse
can you go into bootloader mode?
yes it's go to the bootloader but when run DSUU plase of the last version of the rom and radio is empty, when i click on UPGRAD it get me ERROR CONNECTION
shaemna said:
yes it's go to the bootloader but when run DSUU plase of the last version of the rom and radio is empty, when i click on UPGRAD it get me ERROR CONNECTION
Click to expand...
Click to collapse
I'm sorry. I don't get you. You can go to bootloader, but you get an error. Can you post a screen shot of the error? so, I will know what to do.
How can I uplod picturs?
server is busy it get me Network Error (tcp_error) and cant upload it
the doucument of it is:
(the upgrade page)
Your Divice software is about to be update from:
divice CE image version:0
divice Radio image version:
to:
CE image version: 7210621
Radio image version: R060711N-MN2ARC-RS00011
.......
PLEAS CLICK update to continue
when i click upgrade it show me the fowloeeng error
ERROR:CONNECTION ERROR
THE DIVICE SOFTWAR UPDATE IS HAVING TROUBLE CONECTING TO YOUR DIVICE
PLEAS CHEKE
1)YUOR DIVICE IS PROPLY CONNECTED TO THE USB CABLE OR ...
.
.
.
now what should i do?
do you have any other USB to mini-USB cable? try changing it... The ones used for SD Card readers or Digital Cameras are the same, and do it again.
i do that in all of my USB ports and they are same and get me error conection again
Is there any wey else to inistall a ROM on my divice?
1) Is windows recognizing your device?.. (Do you have activesync installed?)
2) Did u try using different USB cable ?
3) Are you logged on as administrator?
4) Did you remove SD card before going to bootloader mode
5) What is the screen content when you go to boot loader mode
6) Before connecting the device go to bootloader first, then connect the device and then run DSUU
7) Activesync may install device drivers for your device so try installing activesync?
Thanks
when i get my divice in to the bootloader it's display:
===========MN2 Bootloader=
Jun 13 2006 20:41:44
copyright (c) 2006 Quanta cor
poration
CPLD Ver: A0060109
***********************
*Using '<-','->', 'Enter' *
*to choose what you want *
***********************
(1)debug module through UART
(2)jump to DM
enter your selection:
when i conect it to pc( as administrator user) the fallowing line was shown:
USB connected , waiting for download command...
and my computer beeping and found new hardware but not connected to activesync(4.5) , then i start DSUU and when start to upgrade computer show me "ERROR CONECTION" and my divice show me this note:
! ! ! Please use DSUU in OS mode and sync with pc first ! ! !
Usb transfer Fail
please help me
1. We get the most first sewing of Xda-atomexec-eng-20060614_r060428n_ex0028.exe (only by this sewing restore was able)
2. We drag out the files of eboot.nb0
3. We copy on miniSD in a root directory.
4. We insert miniSD in Pocket, enter in bootloader (Camera+SR)
5. We wait inundated while.
6. We take out a miniSD, enter in bootloader, start sewing on PC, connect to USB (it is needed to put to death in the processes of AS)
We are sewn!!!
Hi,
I have a big problem.
Sorry, but i already search in this forum but no success.
I upgraded a ATH100 with a SPL 3.65 ATH400 Rom
Now, i try to back to ATH100 but i cant. With PC and RomUtility, i get MODEL ID 244 error.
With SDCard i get 00058002 error while Loading...
Anybody can help me.?
Thanks
athena400back to 100
i was in too, now if you cant downgrade yet,sent me an Email ,to [email protected] and sending to me alot of pic from thet and information about your rom.
hi guys,
I had the same issue too....can not flash from SD card with 00058002 loading ...
any solution yet ??
hi guys,
I had the same issue too....can not flash from SD card with 00058002 loading ...
any solution yet ??
I have same problem. Please anybody can help me?
Try out This>>>>>
ERROR [244] : INVALID MODEL ID
from cmonex @xda-dev
This is good for both corrupt modelid and corrupt wifi, and fixes both at the same time.
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
NOTE, the command starts with a lowercase "L", not "I"!
WARNING: PLEASE DO NOT MIX UP THESE TWO DIFFERENT COMMANDS!!!
if this info helps: most people will have SPL 3.xx, and if you have AP4 (not vanilla) already running then you're definitely 3.xx
13. mtty will popup a window asking "OK", you press OK!
if you get "Fail to synchronize with the host (1)", then make sure you did follow step by step. if still same error, try placing mtty and the bin file under C:\.
14. now the file downloads, if mtty reports it flashed the file, and at the end "code entrypoint unknown", then that's it, now boot back to WM and see if wifi works.
Download: Mac1.zip mtty_0513_Test.zip
But where atachment ?
For me....WORK...THANKS again CMONEX
but i not do to repair wifi i want to flash my wm........
help me please ,,,
i make hard spl for athe400 in athe100
"ERROR [244] : INVALID MODEL ID
from cmonex @xda-dev
This is good for both corrupt modelid and corrupt wifi, and fixes both at the same time"
as it says it fixes corrupt modelid
It is worth a try
ERROR[244] :Invalid model ID ATHE100
Hi,where do i find the MAC adress for my ATHE100 as i cannot get forward from the bootloader?I am using SPL-v1.20.Olipro.Thanks to any1.
Yes, where is the MAC ADDR
As above, would be grateful if anyone would help us find where the MAC address and thanks for this thread this is the bane of most new owners and newbies. Cheers!!
Mac addr found, but......
Yes found the MAC address - it's under the battery cover, but having gone thru the whole process I got the following 3 errors at the end-
ERROR: no header matched
Transfer CERT error
Flash Programming Error
Thanx buddies!
3 ERROR Messages!!!
Hi Lakeman, could you help decipher these mysterious errors which I had after I have gone through the process twice
ERROR: no header matched
Transfer CERT error
Flash Programming Error
Thank you!
invalid Command
command error
whats wrong???
Cmd>lnb ameo.bin 76508000
lnb ameo.bin 76508000
Command error !!!
here you go >> http://xacsx.de
german ameo-site, roms, repair, and other helpful things
command error
whats wrong???
Cmd>lnb ameo.bin 76508000
lnb ameo.bin 76508000
Command error !!!
if you get notice
-> ERROR [242] : INVALID LANGUAGE
-> ERROR [244] : INVALID MODEL ID
-> ERROR [294] : INVALID VENDER ID
-> ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
stuck in bootloader. Help needed.
I have a HTC Athena x7500.
accidentally upgraded my htc x7500 WITH SSPL-Manual-x7510.zip of HTC X7510
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10.0000
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I have explored ruu_signeg.nbh in spanish rom with notepad jai entered the signer spl 1.10 I know if is sure or not
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
with mtty : task 32 level=ff
is what I can fix this problem with mtty
so if possible please guide me
I board on my pda (cid locked)on the Spanish language HTC_304
sorry for my bad Englis
thank you in advance
My email: [email protected]
http://forum.xda-developers.com/showpost.php?p=5205291&postcount=8
I think there is another thread somewhere about this but you could try the incorrect ID fix in the post above
and try to do the lower SPL
Hello Professionals (0:
Sorry for my bad English, German was better (o;
My HTC S740 / Rose starts suddenly no more.
It starts always new after the new "smart mobility" screen
= Loop
Do you have a solution without having to send to HTC?
BTW: When I try to flash I get the error message:
"invalid vendor id"
although it is actually an original HTC device is.
Thank you for your help (o:
What ROM are you trying to flash? The ROM is probably for some other branded S740.
To flash this ROM anyway you can use QMAT to generate goldcard and flash it (extracted ROSEIMG.nbh) from card...
interessting! can you post some link or how-to ?! i realy want to try it
Hello.
I have the same problem.
I have S740 with wrong downloading soft.
When I try to load new ROM into my S740 after 1% downloading the Smartphone ROM Upadate Utlility 3.27.4.3 show ERROR [294]: INVALID VENDER ID.
I don't know what will be before.
How can I solve this problem?
I will be very very grateful.
Rgds.
Read the stickies. You need HardSPL.
Could you tell me step by step what I should do?
1. Activesync doesn't see phone.
2. When I turn on the phone (using data cable) is only black screen SMART MOBILITY and restart and restart ect ect.
3. I downloaded RUU_Rose_Orange_UK_1.17.61.2_Radio_sign_12.29.30.09_0.29.30.22_Ship and I copied RUU_signed.nbh into the microSD card.
4. I changed the name from RUU_signed.nbh to RoseIMG.nbh
5. I turned on the phone one more time, and put button VOL DOWN
6. Then we can see info LOADING, next CHECKING and next info 0028002 NOT ALLOWED
7. Then I can see screen red, green, blue and below is white part with info: USB
8. On this screen is also:
ROSE100
SPL-1.54.0000
MicroP-Rose (LED) v10
MicroP-Rose (KEY) v5
PCBID 0x80
RID 0x0
9. Activesync still doesn't see phone.
10. When I try to use ROMUpadateUtility after 1% I see ERROR [294]: INVALID VENDER ID.
11. I used older and new versions of ROMUpdateUtility and always is the same problem.
So could you tell me step by step what can I do?
Thank you for help!!!
Now I know more.
I tried to connect via Activesync and download new HardSPL, but there was no connection between S740 and Activesync. I used 2 comps, 2 different data cables and without any progress.
Seems that phone is without ROM now.
Connecting without microSD card is good. I turn on the phone, push VOL DOWN and I see boot menu with the SERIAL info. When I put data cable I can see USB.
So all seems to be correct.
But how to download HardSPL without Activesync?
I have no connection between phone and Acitesync so I can not download HardSPL. I use Rose-S740-HardSPL-Kit-by-jocky2001, hope that it is correct SPL.
i went to this thread
http://forum.xda-developers.com/showthread.php?t=472169
to upgrade my htc p3400i which has a s/n HT 814. I first tried the olipro method but it failed and my device was dead the i tried to unbrick it by using orefkov method as explained in that thread, when i reached this step
7. Now release the camera button, close the MTTY program and run ROMUpdateUtility.exe in the same folder, not the one outside it. That one is for RAM flashing that we will use later. Check the boxes in each step and click Next Next and then at last Update. Let it finish the process. Your phone will restart.
i get this error of error 200 , invalid update tool of which i am attaching a image . Please help me i am very new
make sure that USB sync is done properly before running RUU...i.e drivers properly installed.
Hi boys,
sorry my English is not very good, but I hope that somehow write.
I've installed the new firmware yesteday on my new tablet Ainol novo 10 hero - firmware had indication - "Novo1003-Hero-1219".
Installation was OK.
Then I rebooted system and tablet don't power on.....
What I have do ??? .....
Please ....
Happened to me before.
Refer here: Click Me
and here: Click Me
Solved it while referring to the guide above.
Thanks ....
I've followed the instructions, but step 5 => NOK.
This is log, when I press start in program :
-----importUpgradeFile-----filenameC:\Android\firmware\1115\Novo1003-Hero-1115.zi
-----importConfigFiles-----filenameC:\Android\AMLflash\resource\config_progress.xm
-----importUpgradeFile-----filenameC:\Android\firmware\1115\Novo1003-Hero-1115.zi
-----importUpgradeFile-----filename
[T 1][15:01:31]: load spl ...
[T 1][15:01:36]: load spl ...
[T 1][15:01:41]: load spl ...
[T 1][15:01:47]: load spl ...
[T 1][15:01:52]: load spl ...
[T 1][15:01:58]: load spl ...
[T 1][15:02:03]: load spl ...
[T 1][15:02:03]: load spl failed 20 times,maybe because rom code cannot run
[T 1][15:02:04]: failed because no connected device ,current step is 0
-----importUpgradeFile-----filename
-----importUpgradeFile-----filenameC:\Users\kwetak\Downloads\ainol_hero_1207v2_bloatfree2\1207v2_bloatfree2.zip
-----importConfigFiles-----filenameC:\Android\AMLflash\resource\config_progress.xml
-----importUpgradeFile-----filenameC:\Android\firmware\1115\Gapps_1115.zip
-----importConfigFiles-----filenameC:\Android\AMLflash\resource\config_progress.xml
log\02.11.15.09_.log
success:0 failed:0 failed postion:
Program write : Device - Disconed / Failed
nobody knows ?
Try another rom and do you have recovy on it?
Qwetak said:
nobody knows ?
Click to expand...
Click to collapse