Zenfone 5 A502CG Unable to enter fastboot/droidboot - Android Q&A, Help & Troubleshooting

Zenfone 5 A502CG Unable to enter fastboot/droidboot - Android Q&A, Help & Troubleshooting

Hi all,
I'm not very familiar with phone terms but the situation is like this:-
- suspected like bricked
- connect USB to computer and press Volume Up + Power = USB Logo with white load bar
- disconnect USB and turn on = Repeatedly show Asus logo
- disconnect and press Volume Up + Power = USB Logo with red bar with a splash off Asus logo and turn off (a blink an eye)
- real problem is unable to enter droidboot/fastboot
I have tried to search for the thread to solve this problem but not successful yet. Method that I have tried so far:-
- installing iSocUSB
- installing Intel driver
- installing xfstk (FW+OS failed)
- installing MFT (not know which file that be used as zip/xml)
- run adb tools command (error: device not found)
- Intel SOC appear on device manager and when connect the phone to USB, it will appear CloverView too.
- installing asus pc link
- installing PDANet
I have seen most thread and discussion mention a phrase like "press volume up + power and you will enter fastboot/droidboot" but how about IF I can't enter fastboot/droidboot; they not mention the step. What should I do to enter it? I also search for key "A502CG unable to enter droidboot/fastboot" but result from google shows as what I mention before; the phrase "press volume up + power and you will enter fastboot/droidboot" which not working on me.
If someone has same problem with me and solve this to recover the firmware to its origin, kindly share. I believe there is someone who are same as my situation here.
Hope for help/guide. Thanks

liey87 said:
Hi all,
I'm not very familiar with phone terms but the situation is like this:-
- suspected like bricked
- connect USB to computer and press Volume Up + Power = USB Logo with white load bar
- disconnect USB and turn on = Repeatedly show Asus logo
- disconnect and press Volume Up + Power = USB Logo with red bar with a splash off Asus logo and turn off (a blink an eye)
- real problem is unable to enter droidboot/fastboot
I have tried to search for the thread to solve this problem but not successful yet. Method that I have tried so far:-
- installing iSocUSB
- installing Intel driver
- installing xfstk (FW+OS failed)
- installing MFT (not know which file that be used as zip/xml)
- run adb tools command (error: device not found)
- Intel SOC appear on device manager and when connect the phone to USB, it will appear CloverView too.
- installing asus pc link
- installing PDANet
I have seen most thread and discussion mention a phrase like "press volume up + power and you will enter fastboot/droidboot" but how about IF I can't enter fastboot/droidboot; they not mention the step. What should I do to enter it? I also search for key "A502CG unable to enter droidboot/fastboot" but result from google shows as what I mention before; the phrase "press volume up + power and you will enter fastboot/droidboot" which not working on me.
If someone has same problem with me and solve this to recover the firmware to its origin, kindly share. I believe there is someone who are same as my situation here.
Hope for help/guide. Thanks
Click to expand...
Click to collapse
Kindly help

liey87 said:
Kindly help
Click to expand...
Click to collapse
My zenfone 5 lite(A502CG) is hard bricked and
I can't enter into droidboot or sideload it is stuck at the "Intel inside" logo
can anyone please help .
Since I can't find xfstk files for a502cg I am unable to flash it with xfsk & i don't know how to extract the files for xfstk from the firmware.zip for a502cg .
Any help will be thankfull

Related

[Q] Getting to fastboot / bootloader mode

Hi,
after some complications with the partition mapping on my tablet i finaly extracted the boot.img created a custom boot.img. Now want to flash it back using adb, fastboot or flash_image. Afaik flash_image isnt supported, get some errors "error scanning partitions"....
So i tried to flash with adb / fastboot, but it is required to boot to bootloader mode.
I tried many key combinations on my tablet (power button, home, volume keys) and apps to boot it into bootloader mode but was not successfull yet ("adb shell reboot bootloader" and Quick Boot App from Play Store).
I´ve got an Allwiner A10 Tablet with T15A_V5 Mainboard and 1GB RAM (like the goclever a103 tablet). Also known as (same hardware):
- Manta MID06
- Point of View Protab XXL
- Goclever A103
- Storex eZee'Tab 10C
- Coby 1042
- Yarvik TAB464
Any idears how to get to bootloader mode or flash the img back?
Ty.

*push*
easier to get anwsers for apple devices than getting feedback here... wtf?!

You don't reflash these A10-based tablets from bootloader mode. AFAIK they don't even have a bootloader mode.
You reflash them from your PC using the Livesuit program, with the tablet connected over USB.
The tablet has to be put in a specific mode (FEL mode) in which the screen will remain dark and a different USB device will be detected by the PC (Livesuit comes with a driver for this).
To put the tablet in this mode :
- turn in off completely (not just standby mode) and disconnect the USB cable
- start the Livesuit program, and select the firmware image (.img file) you want to flash
- hold the Volume- button on the tablet and while holding it, connect the USB cable to the PC
- while still holding Volume-, make a succession of quick press and release on the power button (at least 5 or 6 in my experience)
You'll hear your PC detecting a new USB device.
- release the button
- make a force installation of the driver that came with Livesuit
A popup should appear asking if you want to do a forced format. Choose yes, then flashing should begin (progression bar)

livesuit wont install
i downloaded livesuit but when i try to install it blinks out and nothing happens can i get help please ? im so close to fixing my Eglide Pro III

Help with bootloop on EGP010

I'm having trouble with a bootloop issue on an ematic EGP010 (an apparently unpopular device - I am unable to find much detail at all about it
I've posted a video to show what is happening here:
As you can see I get the boot logo, then it appears to attempt to install an update, then it restarts and repeats the process.
I've attempted to get into a system recovery but every key combination I try doesn't work:
-vol up + pwr causes it to shut off as soon as the logo shows up
-vol down + pwr does nothing to the device itself, but will allow a computer to recoginze it via USB
I can get the computer to recognize the device, but because the EGP010 is cheap an unpopuplar, I was not able to find specific drivers for it. I was able to get the generic drivers installed, and its listed as "This device is working properly" however no devices are listed when I run "adb devices"
I'm at a loss for what to try next. Any suggestions for next steps or other things to try?

[HELP] Can't enter flashmode/recovery mode/fastboot mode [e2306] [MM] {UB}

Well, i've flashed the ftf file downloaded directly from xperifirm {E2306_26.3.A.0.131_R2C_Customized GEL_1294-3902}
-update-
some mysterious, magical stuff hapened and i entered fastbootmode
can boot recovery and boot.img from fastboot and now everything is fine
<3
thanks everyone
then, i've try to install root (following a tutorial for this device and this comp.) but i could not enter to FASTBOOT MODE
try using:
- (vol+) + (plug the phone)
-(power btn) + (vol+) + (plug the phone)
-(power btn) + (vol+) + (vol-) + (plug the device)
and the only thing that happened is: -Vibrate + sony logo ---> normal boot
----
Then i try to enter fastboot using the adb command {ADB REBOOT-BOOTLOADER}
but it just reboot normally (sony logo and then start normally)
[[ADB do recognize my device and all drivers were properly installed; but can't enter to fastboot mode]]
---
I've try to reflash my device again, but then i couldn't be able to enter to flashmode
{ with the device off; press vol- and then connect to usb}
after several attempts using - [(power btn) + (vol-)] i entered flashmode and reflash my device...
----
then i activate dev mode: [usb debuggin and OEM UNLOCK]
and try to get to fastboot mode, but the same results...
i got my device recognized by {ADB DEVICES}
but can't get fastboot
-----
Then the user who's helping me told me to reflash using this config
[in excludes section check all except AMSS_FSG, AMS_FS1, AMS_FS2,BOOT DELIVERY, KERNEL. Don't check anything else.]
But i can't get flashmode now... i try all the combinations, try in ubuntu 16, and windows 10... but nothing
the device starts normally nothing wrong.... except well, i can't enter any -mode- now...
any help?
Thanks

try enable usb debugging. go to setting, about phone, then scroll to build number. tap it repeadly till developer option appear on setting. set enable usb debugging there. and try flash it again.

I can't get anything to start!
~~~~
...Well said:
]
---
~~~~I've try to reflash my device again, but then i couldn't be able to enter to flashmode
~~~~{ with the device off; press vol- and then connect to usb}
~~~~after several attempts using - [(power btn) + (vol-)] i entered flashmode and reflash my device...
----
~~~~then i activate dev mode: [usb debuggin and OEM UNLOCK]
~~~and try to get to fastboot mode, but the same results...
~~~~i got my device recognized by {ADB DEVICES}
~~~~but can't get fastboot
-----
.~~~~.. nothing wrong.... except well, i can't enter any -mode- now..
~~~~any help?
~~~~Thanks
Click to expand...
Click to collapse
[~~~~QUOTE=shouqinz;67837866]try enable usb debugging. go to setting, about phone, then scroll to build number. tap it repeadly till ~~~~developer option appear on setting. set enable usb debugging there. and try flash it again.[/QUOTE]
Girlfriend tried to update her Sony Aqua M4 e2306...
she says that the boot loader was unlocked, and she installed the twrp update... and the root check came back rooted.... she powered off the phone and put it on a charger. ...
a few hours later she tried to restart it and only got the Sony Xperia screen then reboot loop.
I've spent 2 days reading everything that i can find and trying various solutions but most won't work because it won't stay connected long enough to use companion, adb, fastboot, bootloader, etc. When the devices is seen by pc it is only for a moment and comes up as a generic MTP device or a hard drive i can't open.
I can get the occasional green or blue lights and sometimes a generic battery symbol by powering off and pressing + or - with power, but never get a recovery or boot load screen... only alternating "sony Xperia" and darkness
also, Emily won't update.
I've tried multiple solutions using different versions of SDK, ADB, sony and xperia Companion, fastboot, bootloader, odin, pwm, and more on multiple machines from XP to Win10, but nothing seems to even make a dent!
I've removed the back and disconnected the battery for 2 hours and am currently trying to research a more physical hack/repair using riff jtag.
i see many people with "boot loop" issue , but no one seems to follow through and say how to get out if you don't have the option of booting to anything....

merwinaleman said:
Well, i've flashed the ftf file downloaded directly from xperifirm {E2306_26.3.A.0.131_R2C_Customized GEL_1294-3902}
then, i've try to install root (following a tutorial for this device and this comp.) but i could not enter to FASTBOOT MODE
try using:
- (vol+) + (plug the phone)
-(power btn) + (vol+) + (plug the phone)
-(power btn) + (vol+) + (vol-) + (plug the device)
and the only thing that happened is: -Vibrate + sony logo ---> normal boot
----
Then i try to enter fastboot using the adb command {ADB REBOOT-BOOTLOADER}
but it just reboot normally (sony logo and then start normally)
[[ADB do recognize my device and all drivers were properly installed; but can't enter to fastboot mode]]
---
I've try to reflash my device again, but then i couldn't be able to enter to flashmode
{ with the device off; press vol- and then connect to usb}
after several attempts using - [(power btn) + (vol-)] i entered flashmode and reflash my device...
----
then i activate dev mode: [usb debuggin and OEM UNLOCK]
and try to get to fastboot mode, but the same results...
i got my device recognized by {ADB DEVICES}
but can't get fastboot
-----
Then the user who's helping me told me to reflash using this config
[in excludes section check all except AMSS_FSG, AMS_FS1, AMS_FS2,BOOT DELIVERY, KERNEL. Don't check anything else.]
But i can't get flashmode now... i try all the combinations, try in ubuntu 16, and windows 10... but nothing
the device starts normally nothing wrong.... except well, i can't enter any -mode- now...
any help?
Thanks
Click to expand...
Click to collapse
did you flashed hole ftf using flashtool or only the mencioned partitions above?

PiSpecialist said:
did you flashed hole ftf using flashtool or only the mencioned partitions above?
Click to expand...
Click to collapse
I still can't enter any-mode, so i haven't flash any ftf

me too
merwinaleman said:
I still can't enter any-mode, so i haven't flash any ftf
Click to expand...
Click to collapse
Same Here - is there no-one willing to help?!?
anyone know how to physically cause a device to self test, or reload defaults, ....or.... boot from sd by shorting a pin OR SOMETHING???
grrr - help:crying:

well... a little progress after 100s of reboot attempts!
i see a HD in the Device manager.
I can't access the disk, but it isn't constantly rebooting..
any one have a suggestion for my next move?
Error 7/24/2016 8:40:41 AM DeviceSetupManager 121 None
Device USBSTOR\Disk&Ven_SONY&Prod_Mass_storage&Rev_0310\YT9115VK6R&0 was configured.
Driver Name: disk.inf
Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}
Driver Date: 06/21/2006
Driver Version: 10.0.10586.0
Driver Provider: Microsoft
Driver Section: disk_install.NT
Driver Rank: 0xFF0006
Matching Device Id: GenDisk
Outranked Drivers: disk.inf:GenDisk:00FF2002
Device Updated: false
Parent Device: USB\VID_0FCE&PID_E1AD\YT9115VK6R

...still need help....

-update-
some mysterious, magical stuff hapened and i entered fastbootmode
can boot recovery and boot.img from fastboot and now everything is fine
<3
thanks everyone

merwinaleman said:
-update-
some mysterious, magical stuff hapened and i entered fastbootmode
can boot recovery and boot.img from fastboot and now everything is fine
<3
thanks everyone
Click to expand...
Click to collapse
dude... PLEASE tell me what mysterious, magical stuff happened?!?!!?!?!? I've been having exactly your issue for days now and can't get past it!!! Please

Ugh. I'm having the same problem. Magical stuff isn't very helpful :/

Boot loop
trechurch said:
~~~~
[~~~~QUOTE=shouqinz;67837866]try enable usb debugging. go to setting, about phone, then scroll to build number. tap it repeadly till ~~~~developer option appear on setting. set enable usb debugging there. and try flash it again.
Click to expand...
Click to collapse
Girlfriend tried to update her Sony Aqua M4 e2306...
she says that the boot loader was unlocked, and she installed the twrp update... and the root check came back rooted.... she powered off the phone and put it on a charger. ...
a few hours later she tried to restart it and only got the Sony Xperia screen then reboot loop.
I've spent 2 days reading everything that i can find and trying various solutions but most won't work because it won't stay connected long enough to use companion, adb, fastboot, bootloader, etc. When the devices is seen by pc it is only for a moment and comes up as a generic MTP device or a hard drive i can't open.
I can get the occasional green or blue lights and sometimes a generic battery symbol by powering off and pressing + or - with power, but never get a recovery or boot load screen... only alternating "sony Xperia" and darkness
also, Emily won't update.
I've tried multiple solutions using different versions of SDK, ADB, sony and xperia Companion, fastboot, bootloader, odin, pwm, and more on multiple machines from XP to Win10, but nothing seems to even make a dent!
I've removed the back and disconnected the battery for 2 hours and am currently trying to research a more physical hack/repair using riff jtag.
i see many people with "boot loop" issue , but no one seems to follow through and say how to get out if you don't have the option of booting to anything....[/QUOTE]
I have the same issue. I have an unlocked bootloader and booted with boot.img. everything was fine for a day or two, and when I started to factory reset my phone it is causing bootloop issues. sony logo and black screen. It never appears on my computer when connected to use adb. Any idea on how to fix this?

My mob is not able to flsh the stock rom......der s a error showing cannot open bundle....help me out plz

When i do VolumeUp & connect my phone it connects to windows with blue led on phone and after ~6 seconds it just disconnects and shows battery charging thing

Try this, jesus bless you
merwinaleman said:
Well, i've flashed the ftf file downloaded directly from xperifirm {E2306_26.3.A.0.131_R2C_Customized GEL_1294-3902}
-update-
some mysterious, magical stuff hapened and i entered fastbootmode
can boot recovery and boot.img from fastboot and now everything is fine
<3
thanks everyone
then, i've try to install root (following a tutorial for this device and this comp.) but i could not enter to FASTBOOT MODE
try using:
- (vol+) + (plug the phone)
-(power btn) + (vol+) + (plug the phone)
-(power btn) + (vol+) + (vol-) + (plug the device)
and the only thing that happened is: -Vibrate + sony logo ---> normal boot
----
Then i try to enter fastboot using the adb command {ADB REBOOT-BOOTLOADER}
but it just reboot normally (sony logo and then start normally)
[[ADB do recognize my device and all drivers were properly installed; but can't enter to fastboot mode]]
---
I've try to reflash my device again, but then i couldn't be able to enter to flashmode
{ with the device off; press vol- and then connect to usb}
after several attempts using - [(power btn) + (vol-)] i entered flashmode and reflash my device...
----
then i activate dev mode: [usb debuggin and OEM UNLOCK]
and try to get to fastboot mode, but the same results...
i got my device recognized by {ADB DEVICES}
but can't get fastboot
-----
Then the user who's helping me told me to reflash using this config
[in excludes section check all except AMSS_FSG, AMS_FS1, AMS_FS2,BOOT DELIVERY, KERNEL. Don't check anything else.]
But i can't get flashmode now... i try all the combinations, try in ubuntu 16, and windows 10... but nothing
the device starts normally nothing wrong.... except well, i can't enter any -mode- now...
any help?
Thanks
Click to expand...
Click to collapse
1. Turn off OEM Unlock
2. Keep USB Debugging on
3. Enter Fastboot mode
4. Done
5. Jesus Bless You

Thymue said:
When i do VolumeUp & connect my phone it connects to windows with blue led on phone and after ~6 seconds it just disconnects and shows battery charging thing
Click to expand...
Click to collapse
I'm having the same issue.
Anoyone knows how to fix? Maybe is a problem of the cable?
PD: Tested with official cabled and turning Off OEM unlock and still the same.

iFlashed said:
I'm having the same issue.
Anoyone knows how to fix? Maybe is a problem of the cable?
PD: Tested with official cabled and turning Off OEM unlock and still the same.
Click to expand...
Click to collapse
also for me :´(

Thales720 said:
also for me :´(
Click to expand...
Click to collapse
Not sure what your problem is exactly but it is most likely a problem with the cable or the s1 driver's(if your using window's?) one or the other ,
However i need to point out that you must have your OEM lock at the SWITCHED ON position(allow the device to be oem unlocked) or you will trip the frp at the next reboot and will have to reflash your firmware unnecessarily , so to sum up Oem unlock at the switched on position

Hi7m3up said:
Not sure what your problem is exactly but it is most likely a problem with the cable or the s1 driver's(if your using window's?) one or the other ,
However i need to point out that you must have your OEM lock at the SWITCHED ON position(allow the device to be oem unlocked) or you will trip the frp at the next reboot and will have to reflash your firmware unnecessarily , so to sum up Oem unlock at the switched on position
Click to expand...
Click to collapse
the drivers are all installed correctly, I tried doing this with the OEM off and on and it did not work
none of the methods works, adb does normal boot
recovery reboot (and other apps) crash or boot normal too
volume (+) and power button only makes the phone vibrate (and sometimes the Sony logo appears)

I can't stress to you enough that Enable Oem need's to be on the "on position" so switch it on (allow the device to be oem unlocked)and leave it alone it's nothing to do with you not being able to get to fastboot. If you trip the frp on your phone you will not be pleased.
with that said with your phone switched on and USB DEBUGGING SWITCHED ON plug into your usb on computer open a command window and input the following command- adb reboot bootloader you will now see your blue light on the phone this means your sony is now ready for you to flash a custom recovery (assuming you have unlocked your bootloader ?)

Hard Bricked Asus Memo Pad 10 (me102a)

Hi guys,
I found Hard bricked Asus Memo pad in eletric waste, but whatever i tried was end unsuccessfully. Maybe someone can help me.
Situation:
- Tablet is stucked on ASUS logo.
- Volume up + power - dont work (no recovery)
- Volume down + power give me black screen but in PC i can see "Asus ADB interface"
- In this mode "ADB devices" give me nothnig.
- In this mode "Fastboot devices" give me > 123456789 Fastboot
So it looks like bootloader is "working" .....but
I already tried "Fastboot flash" recovery, boot etc.. but everything gives me "FAILED (remote: device is locked)" so it looks like bootloder is locked. I tried "fastboot OEM unlock" it give me OK but on screen nothing and still same error.
EDIT: Asus Flash tool dont work, but it looks like "user friendly ADB" ........ fastboot reboot-bootloader give me unknown usb device (device descriptor request failed) - RK driver wont work ...
EDIT2: ROCKUSB device installed. But RKflashtool give me rkflashtool: fatal: cannot open device
Some ideas how deal with it ?

EDIT (another) :
AndroidTool and Rockchip Factory tool are able to detect "LOADER device"
From both programs i got error "Firmware load failed" (i tried system.img, boot.img, recovery.img ...etc)

Me too.
I have this problem too.
Somebody please help.
Thanks.

feri79 said:
I have this problem too.
Somebody please help.
Thanks.
Click to expand...
Click to collapse
Read my post maybe it can help you , I just got fixed ASUS Fonpad 7 from client who gived to me to repair his device .
But to me in order to get in Recovery mode I pressed Vol + and Power button together and one I see Logo I release both keys and I pressed couple times Vol - when I saw USB Icon or DroidBoot menu.
If you are able to go in to Recovery you can flash your device with SD Card or update with fastboot .
https://forum.xda-developers.com/android/help/asus-fonpad-7-fe170cg-bricked-stuck-t3740819
Stock Rom
https://www.leakite.com/2017/10/download-asus-memo-pad-10-me102a-stock-firmware-flash-file.html

Thanks you so much.
I will try it and will say results to you.
I know this device is for 4 years ago and a budget device, but I bought an iPhone 7 Plus recently and dont have money to buy an android tablet! at least for next 6 month...
***
I dont want do anything, I just open my school books with it, and do homeworks, maybe 2-3 time weekly for about only 30 mins. I open them with my Asus notebook but PDFs are better in a 10.1' tablet!
---------- Post added at 01:22 PM ---------- Previous post was at 01:12 PM ----------
Teddy Lo said:
Read my post maybe it can help you , I just got fixed ASUS Fonpad 7 from client who gived to me to repair his device .
But to me in order to get in Recovery mode I pressed Vol + and Power button together and one I see Logo I release both keys and I pressed couple times Vol - when I saw USB Icon or DroidBoot menu.
If you are able to go in to Recovery you can flash your device with SD Card or update with fastboot .
https://forum.xda-developers.com/android/help/asus-fonpad-7-fe170cg-bricked-stuck-t3740819
Stock Rom
https://www.leakite.com/2017/10/download-asus-memo-pad-10-me102a-stock-firmware-flash-file.html
Click to expand...
Click to collapse
I read the steps, but fastboot isnt working on this device, because non of the "fastboot flash ..." or "adb reboot fastboot" commands works. Also DroidBoot isnt working.
What should I do so?
Thanks

How your device is recognized in Device Manager ?

Teddy Lo said:
How your device is recognized in Device Manager ?
Click to expand...
Click to collapse
Yes.
Also in "This PC" it shows as a "MTP Transfer Device" and it opens the folder and if I insert a Micro SD card, it will show that also.
device is stuck in boot.
when I hold power button, the asus logo shows and then after asus animation, the progress circle spins and spins and spin...
after 10-15 second, the brightness increased a bit, like zenfone 5 boot and this tablet. that it brightness goes up a bit and then device boots and shows lockscreen. but now brightness increases but it still keeps at that screen. and dont boot.
---------- Post added at 03:40 PM ---------- Previous post was at 03:16 PM ----------
Teddy Lo said:
How your device is recognized in Device Manager ?
Click to expand...
Click to collapse
Sorry, I think that you ask "Is" your device recognized in device manager.
-->It is recognized as: "USB MTP Device" under "Portable Devices"

Hi , try to manualy instal this ADB driver on Device Manager , make sure your device is OFF and try again (Vol + and Power button together and one I see Logo I release both keys and I pressed couple times Vol - when I saw USB Icon or DroidBoot menu)and connect your phone with usb open ADB comand line and write fastboot devices .
If not try eith other combination for example
Power off your device and press VOL + and plug USB
-||- and press Vol - and plug USB
-||- and press both Vol - and Vol + and plug USB
If your device is recognised in fastboot extract 3 image files from firmware and flash with fastboot commands like in my post .
https://www.asus.com/Tablets/ASUS_MeMO_Pad_10_ME102A/HelpDesk_Download/

Teddy Lo said:
Hi , try to manualy instal this ADB driver on Device Manager , make sure your device is OFF and try again (Vol + and Power button together and one I see Logo I release both keys and I pressed couple times Vol - when I saw USB Icon or DroidBoot menu)and connect your phone with usb open ADB comand line and write fastboot devices .
If not try eith other combination for example
Power off your device and press VOL + and plug USB
-||- and press Vol - and plug USB
-||- and press both Vol - and Vol + and plug USB
If your device is recognised in fastboot extract 3 image files from firmware and flash with fastboot commands like in my post .
https://www.asus.com/Tablets/ASUS_MeMO_Pad_10_ME102A/HelpDesk_Download/
Click to expand...
Click to collapse
I manually installed that ADB driver from device manager. I tried those three last ways, last one worked, but it go to "Android System Recovey 3e". I have also went here by pressing volume+ and power button holding. nothing new
problem is that i can't go to fastboot. If it go there, then it can fixed. Like when I had a problem like this on my Zenfone 5 A500CG when rooted and installed a custom rom. and I fixed it my self with "fastboot flash ....." command. also I fixed a Asus Nexus 7 2012 with same story.
In the "Android System Recovey 3e" it have these:
-reboot system noww
-apply update from ADB
-apply update from external storage
-update image from external storage
-apply update from cache
-wipe data/factory reset
-wipe cache partition
when I select apply update from ADB, that is when my pc detects it as: Asus Android ADB interface and I when i type "adb devices" it shows my devices for <sideload> next to it.
on device screen it shows:
Now send the package you want to apply to the device with: "adb sideload <filename>"

Write this command :
adb reboot bootloader
Shut down the device
Hold Power button + volume UP at the same time
Once vibrate, hold volume up only and it should enter into fastboot mode and from fastboot you should flash images .
Here you have steps how to reinstall firmware:
https://www.youtube.com/watch?v=6E5wdjgXROg

Teddy Lo said:
Write this command :
adb reboot bootloader
Shut down the device
Hold Power button + volume UP at the same time
Once vibrate, hold volume up only and it should enter into fastboot mode and from fastboot you should flash images .
Here you have steps how to reinstall firmware:
https://www.youtube.com/watch?v=6E5wdjgXROg
Click to expand...
Click to collapse
Thanks but i already tried that command, but it says:
"Error: closed"

Reinstall ADB , and also all drivers use USBDeview to uninstall old drivers , scroll down for download
https://www.nirsoft.net/utils/usb_devices_view.html

Teddy Lo said:
Reinstall ADB , and also all drivers use USBDeview to uninstall old drivers , scroll down for download
https://www.nirsoft.net/utils/usb_devices_view.html
Click to expand...
Click to collapse
I installed USBDeview and done them, but it keep saying: "Error: closed" in the adb sideload connection
I think it is bricked reeeeally hard!

Did you tried to adb sideload and then add stock firmware from asus and hit Enter ?

Teddy Lo said:
Did you tried to adb sideload and then add stock firmware from asus and hit Enter ?
Click to expand...
Click to collapse
Yes i tried sideloading stock firmware first of all!
But the progress percent goes to 100% then on the device it says: start updating... then says verifying package... and then says verification failed, instalation aborted !

Try to disable driver signature on your pc , and try again if not try another firmware for your device if you have .

Redmi 3 Bootloop (Bootloader locked) after installing Xposed Framework

Hi guys,
I have a bootloop problem after installing Xposed Framework on Redmi 3 (as far as I remember Android 6.0). I didn't went on checking if xposed is really compatible with this rom + didn't check if there is a custom recovery installed (i know...).
The steps I took is rooted the phone quickly with KingRoot, installed xposed apk and within the app I installed framework as root. Everything looked ok, no errors and restart after the installation process. Here it wouldn't turn back on.
So now the problem is getting this thing back to working condition. First I have thought of "disabling" Xposed. I tried this using adb, but I cannot access the /data folder (system:system) - I get permission denied even when I am logged as root. I though when I will be able to deploy the "disable" file in xposed directory, it should run normal.
Flashing the phone is a problem as well since the bootloader is locked. I can access the fastboot (vol down + power) and adb.
When I try to enter download mode (vol up + power), i get black screen with a phone and usb cable connected to it.
On my PC, when its in download mode it gets detected as marshall london hs-usb diagnostics in device manager - but MiFlash, adb, fastboot, etc. doesn't display the phone. I applied for bootloader unlock on the xiaomi page, but people say its up to 10 days to get this + it is not 100% that by this I will get the phone working again.
Any solution to my problem or some tip?
Thanks in advance,
dumle11

Hi !
1) Try reflashing from EDL Mode.
2) if not working, try this tip :
- Install fastboot minimal driver
- Reboot in fastboot (vol -)
- Then, plug the USB cable while pressing vol - and + in the same time
- Then type : fastboot reboot (with fastboot minimal driver) while keep pressing vol - and +
- The phone should reboot in EDL mode (even if it's black)
3) Else, try with fastboot minimal this tip :
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292

thomas51250 said:
Hi !
1) Try reflashing from EDL Mode.
2) if not working, try this tip :
- Install fastboot minimal driver
- Reboot in fastboot (vol -)
- Then, plug the USB cable while pressing vol - and + in the same time
- Then type : fastboot reboot (with fastboot minimal driver) while keep pressing vol - and +
- The phone should reboot in EDL mode (even if it's black)
3) Else, try with fastboot minimal this tip :
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
Click to expand...
Click to collapse
Hi, thanks for a quick answer! I will check this once I get home and update the post. I forgot to mention that I previously tried to get into the edl (fastboot-edl) and it would give me a message saying "restarting into bootloader (OK)", then it would restart the phone into the mi loading screen (bootloop)

Better Mobile App

welcome