Viper4android for z2 5.1.1 - Xperia Z2 Q&A, Help & Troubleshooting

Every since lollipop update my z2 viper4android cant work at all isit normal?
Sent from my D6503 using Tapatalk

Yes, it does.
Works brilliantly , used it with 5.0.2 and now 5.1.1
If you need some help i will gladly assist.

It works on Sony's 5.1.1 Roms, it only crashed for me on cm12.1.
Sent from Xperia Z2
Luckily not from an iPhone = Yesterdays technology at tomorrows prices

for me it doesnt work can help me?
i install the app and use my music player to play but sound quality does not change

heyumf said:
for me it doesnt work can help me?
i install the app and use my music player to play but sound quality does not change
Click to expand...
Click to collapse
Okay,
Make sure "use awesome player" in developer options is unticked.
If you not using a permissive kernel like androplus then install SElinux Mode changer and set to permissive.
Go to app, in settings and find "Audio settings" in all and disable. Also "Music FX".
Now install V4A app, install drivers and reboot.
Wait for SElinux mode changer to give a heads up that you are set on permissive, open music/walkman play a song and open viper and check if you processing(driver status).
You should be good.

heyumf said:
for me it doesnt work can help me?
i install the app and use my music player to play but sound quality does not change
Click to expand...
Click to collapse
In cm12.1 there is no problem using de SELinux mode changer, set it on permissive, turn off all AudioFX options. That's enought for me.
On stock, ExistenZ, PureX, and others based on stock:
Use de Dolby mod from @Rajeev, it will disable de Sony audio options (so if u want to restore them, u will need to flash again the desired firmware without wipes). Once u do that, use SELinux to set permissive, turn Dolby OFF, install V4A driver, reboot and enjoy.
If you want to use at the same time v4a and Sony audio system, don't install Dolby mod, but u have to set V4A to "compatibility mode" but when u play music, IT WON'T play at the same time other sounds, like navigation instructions.
Actually I'm using V4A in normal mode with @Rajeev's PureX rom using his Dolby mod, it works flawlessly.
Sorry for my bad english.

Oh yeah. You're right. I got an audioFX FC because I used some other mod.
Sent from Xperia Z2
Luckily not from an iPhone = Yesterdays technology at tomorrows prices

Related

[AUDIO][MOD] ViPER4Android Audio Effects

This is not official.
this is posted just for a link and a description.
This is a link to 2 audio mods by team ViperAudio.
This mod/app is really powerful and allows you to truly make any music using any ANY earphones sound AMAZING!
Can give heavy bass , crystal clear clarity and many more effects at the same time and also has a technology so that it does not hurt your ears!
and is very easy to install too. just install the apk.
there's the link to the official post http://forum.xda-developers.com/showthread.php?t=2191223
Much better than Dsp manager or any audio mod/app u have ever tried.
all viper related stuff is owned and created by team Viper. and i take no credits for it
all credits go to teamViper.
I am only a fan who wanted to share this with the razr community
And also let me know if any of u have started using it.
also check out the recommended settings by the original poster. they work relly well.
I use this...it really blows our ears....try it...
Ndietya
demonshouter said:
I use this...it really blows our ears....try it...
Ndietya
Click to expand...
Click to collapse
I hope u are using the convolver too. Adds a completely new dimension to it
Sent from my XT910 using Tapatalk 2
which cpu we must choose ?
oguzpasa said:
which cpu we must choose ?
Click to expand...
Click to collapse
For our razrs it should A9 with NEON
:thumbup:
Sent from my XT910 using Tapatalk 2
and for xhifi?With VFP or CortexAx with NEON?
oguzpasa said:
and for xhifi?With VFP or CortexAx with NEON?
Click to expand...
Click to collapse
CortexAx with NEON
Sent from my XT910 using Tapatalk 2
Gautam Padirooted said:
CortexAx with NEON
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
thx
I am looking to try some of these in this post but the only thing is that I have heard using some of these ROMs while using these audio programs kind of causes the sound to not work. Any experience with this problem?
mvp4him3 said:
I am looking to try some of these in this post but the only thing is that I have heard using some of these ROMs while using these audio programs kind of causes the sound to not work. Any experience with this problem?
Click to expand...
Click to collapse
yes that happens with every 3rd party sound mod u install on SOME roms.
i have had this problem only on AOKP based roms.
there is no problem with CM or Liquid Smooth or any of these stock based roms.
if u have any problem u can report it below. i'll guide u if u have any
:good:
Does anyone run this with the stock-jb ?
Under Settings->Sound->Audioeffects i dont have the option to activate Viper...
BrainChecker said:
Does anyone run this with the stock-jb ?
Under Settings->Sound->Audioeffects i dont have the option to activate Viper...
Click to expand...
Click to collapse
Yeah that's not where u activate it from. Preferably freeze the stock audio effects app by using root titanium backup. If not just switch off the stock audio effects. Then go into the viper fx/xhifi app and see driver status. If it says NO then enable the drivers after which u will have to reboot. Do the same for both the apps
After that u may see viper in the sound settings panel too
Sent from my XT910 using Tapatalk 2
Gautam Padirooted said:
This is not official.
this is posted just for a link and a description.
This is a link to 2 audio mods by team ViperAudio.
This mod/app is really powerful and allows you to truly make any music using any ANY earphones sound AMAZING!
Can give heavy bass , crystal clear clarity and many more effects at the same time and also has a technology so that it does not hurt your ears!
and is very easy to install too. just install the apk.
there's the link to the official post http://forum.xda-developers.com/showthread.php?t=2191223
Much better than Dsp manager or any audio mod/app u have ever tried.
all viper related stuff is owned and created by team Viper. and i take no credits for it
all credits go to teamViper.
I am only a fan who wanted to share this with the razr community
Click to expand...
Click to collapse
Post reading the entire stuff, am dazzled with the installation process, therefore, request you to kindly help me with the step by step INSTALLATION PROCESS...as i sincerely want to experience the audio effects of this software.
Gautam Padirooted said:
yes that happens with every 3rd party sound mod u install on SOME roms.
i have had this problem only on AOKP based roms.
there is no problem with CM or Liquid Smooth or any of these stock based roms.
if u have any problem u can report it below. i'll guide u if u have any
:good:
Click to expand...
Click to collapse
Alright I will install and see what happens.
solidshree said:
Post reading the entire stuff, am dazzled with the installation process, therefore, request you to kindly help me with the step by step INSTALLATION PROCESS...as i sincerely want to experience the audio effects of this software.
Click to expand...
Click to collapse
OK
1) go to the original link and download the apks for viperfx and viper xhifi.
2) use root browser lite and and go to system-> app directory and delete any other audio mod eg. Dsp manager or the stock audio effects. (Optional step)
3) if u were not able to do the above just switch off any audio effects profile
4) go to your downloads folder and install the viper fx app first normally. Open that app and click on install /update driver (choose cortex a9 with NEON)
After installing it will ask to reboot. Do not reboot right now
5) then go the viper xhifi app and install (choose cortexax with NEON) and update driver. It will ask to reboot. Now reboot.
The basics are done.
If u want really high quality profiles for playing with cheap earphones go to the original link and download the convolver samples. Transfer then to the phone and place all of them in the SD card/viper4 android/kernel folder.
If u still did not understand pm me with all the details eg. Your ROM and your audio mod, and where exactly u do not understand
Sent from my XT910 using Tapatalk 2
Gautam Padirooted said:
OK
1) go to the original link and download the apks for viperfx and viper xhifi.
2) use root browser lite and and go to system-> app directory and delete any other audio mod eg. Dsp manager or the stock audio effects. (Optional step)
3) if u were not able to do the above just switch off any audio effects profile
4) go to your downloads folder and install the viper fx app first normally. Open that app and click on install /update driver (choose cortex a9 with NEON)
After installing it will ask to reboot. Do not reboot right now
5) then go the viper xhifi app and install (choose cortexax with NEON) and update driver. It will ask to reboot. Now reboot.
The basics are done.
If u want really high quality profiles for playing with cheap earphones go to the original link and download the convolver samples. Transfer then to the phone and place all of them in the SD card/viper4 android/kernel folder.
If u still did not understand pm me with all the details eg. Your ROM and your audio mod, and where exactly u do not understand
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
i follow the guide but neither the option is being showned in sound settin menu nor any effects applied ...i m on jellybean stock rom rooted......i enabled both software still nothing...i tried changing from normal mode to compatible mode ....safe mode to normal mode so on..but still no changes i even deleted audio effects from system menu...but still not working ...pls help..
GaganPla said:
i follow the guide but neither the option is being showned in sound settin menu nor any effects applied ...i m on jellybean stock rom rooted......i enabled both software still nothing...i tried changing from normal mode to compatible mode ....safe mode to normal mode so on..but still no changes i even deleted audio effects from system menu...but still not working ...pls help..
Click to expand...
Click to collapse
could u try rebooting once again? if there is no change i can confirm that it is not running on stock roms. but it is running on my stock based rom though try on normal mode only. no need to switch to compatible mode and all
And are u using any music player with its own equalizer? if yes it is bound to not work
try with google play music
Gautam Padirooted said:
could u try rebooting once again? if there is no change i can confirm that it is not running on stock roms. but it is running on my stock based rom though try on normal mode only. no need to switch to compatible mode and all
And are u using any music player with its own equalizer? if yes it is bound to not work
try with google play music
Click to expand...
Click to collapse
thnx 4 quick reply mate i restarted many many times after every settings changed .k i will try in google music but the problem is google play music doesnt show all songs on sd card for some reason i tried searching solutions on so many sites but none seems to be working so i m currently using poweramp ...i will try google music n post results if it works
IT WORKS BUT NOT WITH EXTERNAL MUSIC PLaYER.....can u help me how to play in poweramp since i has hat above issue ??
GaganPla said:
thnx 4 quick reply mate i restarted many many times after every settings changed .k i will try in google music but the problem is google play music doesnt show all songs on sd card for some reason i tried searching solutions on so many sites but none seems to be working so i m currently using poweramp ...i will try google music n post results if it works
IT WORKS BUT NOT WITH EXTERNAL MUSIC PLaYER.....can u help me how to play in poweramp since i has hat above issue ??
Click to expand...
Click to collapse
This mod will work only when there is no other equalizer installed. It will definitely not work with poweremp. I have all my music on the ext SD card and play music works flawlessly. Uninstall power amp and try. Tell me if u still have problems.
Sent from my XT910 using Tapatalk 2

[share][SP][Deodex] Viper4Android

im here just for sharing... so i've tried alot of audio mod include pureX beataudio, nooxide, n acidaudio posted in XDA but my fav is this one http://forum.xda-developers.com/showthread.php?t=2191223
download in the link
Requirement:
Root
CWM
here's a little guide to install
edit the build prop search for lpa.decode:true change it to false
/system/lib/soundfx/libhearingprotection.so delete/backup
push v4a to system/app change permission
reboot
then go to the v4a in the app drawer install driver
soundfx choose v4a
reboot
all done
trust me you will love it
im here to share dont thank me, thanks to the zhuhang n viper520 :victory:
Thank you,
but why is it so complicated on the XSP? On the XL and XS is normally sufficient to install the app. At the first call they instaled the drivers. Reboot and you're done.
v4a
heross said:
Thank you,
but why is it so complicated on the XSP? On the XL and XS is normally sufficient to install the app. At the first call they instaled the drivers. Reboot and you're done.
Click to expand...
Click to collapse
well i've tried to install normally, i've done it successfully on my Xray, but XSP (mine 2.245) its a bit difficult... v4a cannot run well (even the prossesing say yes) maybe bcos of firmware... or musicFX that doesnt allow any third parties fx... well u could try to install normally if it work than the prob is my phone.. hehe
for two day i have test the normal way with .245 firmware. the installation worked fine, but the sound was not louder or better. I will try your method. Thank you.
heross said:
for two day i have test the normal way with .245 firmware. the installation worked fine, but the sound was not louder or better. I will try your method. Thank you.
Click to expand...
Click to collapse
i've installed normal way.. but the audio is the same.. i even disable the sony sound enhancement.. but prob still there... soo i installed this way.. its work just fine... welcome..
danielhariri said:
then go to the system/lib/soundfx/soundprotection.so delete it
Click to expand...
Click to collapse
on my XSP with .245 i missing this file.:crying: and V4A it works not correct. only output gain have a effect. Equalizer and eXtra loud will dont work.
My old XS with Viper4Android have better and louder sound. shame.
heross said:
on my XSP with .245 i missing this file.:crying: and V4A it works not correct. only output gain have a effect. Equalizer and eXtra loud will dont work.
My old XS with Viper4Android have better and louder sound. shame.
Click to expand...
Click to collapse
Ok.. first sound protection.so stop enhancement if the enchancement is too loud or reach its treshold.. so its better to delete it... v4a is not function well is not relate to this file... go to option then select sound change to v4a or wrong driver installed..
thanks mate it worked on my xperia sp [odex] too
What settings do i have to make / options to choose in v4a fx ?
Do u use any specific irs ?
sxrmafia said:
What settings do i have to make / options to choose in v4a fx ?
Do u use any specific irs ?
Click to expand...
Click to collapse
dint understand... i choose cortex 8x..
irs i choose Xperia clearbass ;D

Best EQ for the tab s?

Looking for a good eq for the s. Any suggestions?
I use PlayerPro and the DSP Pack for PlayerPro which adds a 10 band EQ. It's not free but I love the combination it really brings my music to life. I have to say I do feel the Samsung audio from the Tab S is much louder then my LG GPad 8.3 was that tablet the audio was just too low, full volume just did not come close to being load enough but PlayerPro with the DSP Pack made it nice and loud.
MarkLI88 said:
I use PlayerPro and the DSP Pack for PlayerPro which adds a 10 band EQ. It's not free but I love the combination it really brings my music to life. I have to say I do feel the Samsung audio from the Tab S is much louder then my LG GPad 8.3 was that tablet the audio was just too low, full volume just did not come close to being load enough but PlayerPro with the DSP Pack made it nice and loud.
Click to expand...
Click to collapse
Thanks for the info! Will give it a try.
I use viper4android on all my devices. Best equalizer by far. So much fine control, you can make your music sound exactly how you want it.
Only downside for some people is that it requires root. If you're not rooted/don't want to root, it wont work.
Viper4Android
uhh186 said:
I use viper4android on all my devices. Best equalizer by far. So much fine control, you can make your music sound exactly how you want it.
Only downside for some people is that it requires root. If you're not rooted/don't want to root, it wont work.
Click to expand...
Click to collapse
Yep I'm rooted so I will give it a try. Thanks for your reply.:good:
I there tried to install viper4android but I get the driver failed to instaol error, due to busybox. I've installed busybox but same error. An6one has a suggestion? Thank you
vibecatalin said:
I there tried to install viper4android but I get the driver failed to instaol error, due to busybox. I've installed busybox but same error. An6one has a suggestion? Thank you
Click to expand...
Click to collapse
There's a fix somewhere in the q&a section. Just curious, is your se for android set to permission? It's in the about device section in settings in case you don't know.
When I get home I will see if it's set to permission. Anyway this is the only application that I have problems with it. The other ones that require root ( and busybox of course) are working without any problem.
L. E. SE for Android it says : Enforcing. It is ok?
vibecatalin said:
When I get home I will see if it's set to permission. Anyway this is the only application that I have problems with it. The other ones that require root ( and busybox of course) are working without any problem.
L. E. SE for Android it says : Enforcing. It is ok?
Click to expand...
Click to collapse
Download SELinux Mode Changer from play store and set to permissive. May not work with Knox though. See if that fixes it.
Ok so I've downloaded the SeLinux Mode Changer, it grants superuser permission but when I set it to permissive, if I quit and enter the app is back on enforcing, also if I set it to permissive and press the home button and go to about device still Enforcing. I've disabled Knox, and freezed all the apps and services with Titanium Backup.
Any ideas?
vibecatalin said:
Ok so I've downloaded the SeLinux Mode Changer, it grants superuser permission but when I set it to permissive, if I quit and enter the app is back on enforcing, also if I set it to permissive and press the home button and go to about device still Enforcing. I've disabled Knox, and freezed all the apps and services with Titanium Backup.
Any ideas?
Click to expand...
Click to collapse
Your gonna need a custom kernel for permissive. What rom and device are you on?
I have an T800 and I m running stock Rom rooted with chainfire's root method
vibecatalin said:
I have an T800 and I m running stock Rom rooted with chainfire's root method
Click to expand...
Click to collapse
Oh.. Yeah we have a kernel thats set to permissive. Its skyhigh kernel. The reason I know that because Iron rom has viper for android included.
DUHAsianSKILLZ said:
Oh.. Yeah we have a kernel thats set to permissive. Its skyhigh kernel. The reason I know that because Iron rom has viper for android included.
Click to expand...
Click to collapse
You da man! Been on my nexus 6 too long and forgot about that.
Ok. So I've installed the SkyHigh kernel, Knox Disabled, Kernel set to permisive STILL the same error .
vibecatalin said:
Ok. So I've installed the SkyHigh kernel, Knox Disabled, Kernel set to permisive STILL the same error .
Click to expand...
Click to collapse
No idea then... Installing a custom rom such as iron rom would work? It worked when I had iron rom on my tab s. Drivers worked fine on iron rom. So it must be a rom realted issue as it works fine on iron rom.
I'm happy with this ROM plus I've found that SkyHigh kernel has some audio options stuff. It is quite good ( the kernel ) so I can live without viper4android . Thanks for all the answers!
Bushcrafter said:
Looking for a good eq for the s. Any suggestions?
Click to expand...
Click to collapse
viper4android seems ok...
Back with the question again, since I've updated to 5.0.2 and the kernel can't be set to permissive, besides ViperFX (wich I can't install on my tab S) what are other alternatives to it?
Thank you!

Viper4Android S5 Marshmallow Best & Easy Method! Stock Kernel ! Stock ROM!

Hi. thanks to @mannyvzla finally i got Viper4Android to work. on Stock Rom, Stock Kernel and Marshmallow!
here are the steps. (you need rooted s5)
1.Install busy box.
2.flash this file via recovery menu https://www.dropbox.com/s/k9cnruw2e1t1d4t/ViPER4Android-supolicy.zip?dl=0
(it will allow viper4android for your stock kernel)
3.after that go to SuperSU Settings and uncheck the entry for namespaces.
4.install viper4android normally (just download the original apk and install it)
5.install the driver, restart phone
6.enjoy your music In BEST QUALITY
Mod works fine!!! Thanks for share it.
A question: How to increase volume in MM stock? Any mod or kernel or app like boeffla? ....
Brilliant, been trying to get it to work for the last week on rooted s5 with stock mm and this sorted it, thank you.
It worked thanks
no problem guys, enjoy!
Will it work in g900h marshmallow and i m not getting entry for name spaces in su setting
S5 900f alexandr mm rom not working
EDIT
Tried again and it works!
I dont know what I did different last time, but it works now! Thanks!
Sent from my SM-G900F using Tapatalk
Thanks a bunch!!
Installed on a Canadian sm-900w8, stock.
I also froze the built in music player, adapt sound and google music to make sure it wouldn't interfere.
I couldn't locate the music effects in either the default player or google music, which is why I disabled them.
Again thanks for this, my device sounds great!
c9rodolfo said:
Mod works fine!!! Thanks for share it.
A question: How to increase volume in MM stock? Any mod or kernel or app like boeffla? ....
Click to expand...
Click to collapse
If you go into Viper and change the Ui setting to moderate it will open more options being Master Gate which is under Extra Loud. Both of these options can give a boost.
babalou62 said:
If you go into Viper and change the Ui setting to moderate it will open more options being Master Gate which is under Extra Loud. Both of these options can give a boost.
Click to expand...
Click to collapse
Thanks for your answer... I modified some system files and now listen better and stronger
i am glad that it worked for all of you! enjoy the music
Just a quick question, does it work on the stock Music Player of Marshmallow?
does it work on g906s?
Thanks a lot! Worked perfectly on my Galaxy S5 with marshmallow.
I tried this. The drivers were installed normally. But whatever options I enable in the V4A, it doesn't have any effect on the sound. I'll try it again.
GhostKiller19 said:
I tried this. The drivers were installed normally. But whatever options I enable in the V4A, it doesn't have any effect on the sound. I'll try it again.
Click to expand...
Click to collapse
Make sure to also try selecting "Compatible" mode in "Settings - FX Compatible Mode". For me if it's on "Normal" there is no effect but when I change it to "Compatible" it works fine.
Works perfekt for me ????chanks
Gesendet von meinem A1-810 mit Tapatalk
Will this also work on other devices wit MM and stock kernel like SM A520F?
Worked great for me. I first had to switch from MagiskSU back to SuperSU, which was tricky. I also needed to use compatible mode. Using it with Spotify.
Dropbox file was deleted
Sent from my Galaxy S5 using XDA Labs

[A310][MOD][ViPER4ANDROiD][RESURRECTION REMIX]

I made this mod for users of Resurrection Remix for A310 that want an easy way to boost media audio.
This will install ViPER4Android FX v.2.5.0.5 as a system app and remove AudioFX, making V4A the default equalizer.
No need to install drivers. They come pre-installed with this zip!
No need to worry about flashing this after each and every rom update,
I included a script for backup & restore of V4A, and removal of AudioFX on each rom update!
Flash, reboot, open V4A and turn on master power, play around with the settings untill you find what's good for your headphones, and taste of music.
Enjoy!
What I tried so far: Stock music player, PowerAmp, Spotify, YouTube, MX Player. All working.
Credits:
ViPER4Android FX @zhuhang
Big thanks to @Calogero Marziano for help with testing.
Also a big thanks to @KMXSLR for bringing RR to our device.
Download: A310-V4A-RR.zip
tys0n said:
I made this mod for users of Resurrection Remix for A310 that want an easy way to boost media audio.
This will install ViPER4Android FX v.2.5.0.5 as a system app and remove AudioFX, making V4A the default equalizer.
No need to install drivers. They come pre-installed with this zip!
No need to worry about flashing this after each and every rom update,
I included a script for backup & restore of V4A, and removal of AudioFX on each rom update!
Flash, reboot, open V4A and turn on master power, play around with the settings untill you find what's good for your headphones, and taste of music.
Enjoy!
What I tried so far: Stock music player, PowerAmp, Spotify, YouTube, MX Player. All working.
Credits:
ViPER4Android FX @zhuhang
Big thanks to @Calogero Marziano for help with testing.
Also a big thanks to @KMXSLR for bringing RR to our device.
Download: A310-V4A-RR.zip
Click to expand...
Click to collapse
Good job thanks you
will this work on A510F samsung a5 2016 ?
RR for our A3 is gone... right?
Yeah RR 7.1 is gone ( i dont know why and all files deleted) but now they're working on Oreo. It's Alpha now. We need to wait their work.

Categories

Resources