Hello everyone! I'm new here. I need a lot of help from you . My S6 (SM- g920F ) fell in the pool. I had to change the screen module. After I changed the phone does not start. Is looped . I've tried installing the rom stock , do hard reset and nothing . It appears PASS message in ODIM but when you restart it back pro loop. In download mode appears reactivation LOCK : ON. I do not activated any of that. I have looked and found nothing like it in google . Can someone help me please!!!
Related
hi good day my samsung s3 i9300 battery died on me and wouldn't power on because its stuck on the samsung s3 screen i've done all the hints an tricks i saw could someone who has the same issue as i and got through please help me i firstly factory restore it and it was still stock then when booted into the menu power up botton this it had an error with some csc then that had changed to imei problem after other attempts my problem right now is that i got the device on with 4.0.4 ics but a box comes up sometimes stating phone in factory or safety mode or sometthing like tthat and i have not backed up my imei and i have ariza but it would load onto the device but it wouldn't work because it automatically boots into factory/ safety mode how can i fix this also too if i try any other software like like jellybeans versions i get pass the s3 screen and sticks on the samsung with a boot loop please help me i really need my phone
Your post is to difficult to understand .
Start at the beginning flash stock JB rom via odin .
Then report back .
jje
Today I got my Nexus 4 and started to play with it .I am a complete novice to rooting and android .
I wanted to dual boot Android and Ubuntu Touch , came across this nice app called MultiRom which needed rooting .I dug around a bit .
Finally rooted the phone using CMW ( recovery-clockwork-touch-6.0.4.3-mako ) / SuperUs ( 1.80 ) . I followed the how to from a bunch of videos in youtube .
I was able to install Multiboot . on opening the app , some warnings were thrown that MultiRom, backup and kernel patch were not installed . I have checked the three checkboxes and proceded with install . It went for a reboot .After reboot ( it started to boot from the 'internal', which is the default stock android i believe ) nothing happens . The initial 'Google' logo comes , then the screen starts flickering and stays like that ( so far one hour ) .I tried to boot to recovery and did a factory reset .That did not help either.
Please let me know if there is something I could try, may be collect some logs . The device is not definitely bricked because I can see the boot menu .I suspect the kernel patch did something fishy . Any way where I can look to find the issue ?
Thanks .
Dear Friends,
My friend bring his SM-J100h/DS to me asking for repair.
it was stuck on boot so i tried to Wipe Data / Factory Reset, but there were many errors, something like "E: can't mount....."
After that, i flashed it with ODIN 3.09 + the latest firmware (September 29, 2016 based on my country code)
The flash was successful and PASS 100%..
but still stuck on boot logo.
so, i went to Youtube and found this link:
https://www.youtube.com/watch?v=1T9fxno2s68
i did everything exactly the same:
ROM => J100H_XXU0AOA1_OXE0AOA1.zip (contain files as shown below)
BL => BL_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar.md5
AP => AP_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar
CP => CP_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar
CSC => CSC_OXE_J100HOXE0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar
PIT => J13G.pit (Repartition)
The flash once again PASS 100% and the device rebooted automatically but NO POWER.
It is completely DEAD now.
i removed the Battery, put it on again, still cannot be powered on.
i plugged in the USB charging cable, still no power, no charging indicator.
It's now completely dead.
What shall i do now? Somebody Please Help me.. :crying::crying::crying:
any help & advice would be much appreciated...
Somebody please help me T_T
Me too bro got the same problem! amd noone here seems can tell us whats happened and if they can help us
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Same here, didn't detected but randomly detected from my computer but the phone still showing a black screen, Why???
s6 edge stuck on splash screen, tried wiping everything then via Odin, loaded stock ROM downloaded from Samfrew site. Have tried all the tricks but can't get past the Samsung S6 splash logo... anyone help please?
Me too
Men i did the exact same thing 2 years ago... The phone is not working anymore for me too....
But you have motivated me... When i go back from my vacations i'm going to try to install another ROM from recovery. I will keep you in toutch if i suceed.
(Sorry for the bad english (french))
ok i'm stuck....
so I've made some progress...
basically my phone is pretty broken....
my bootloader is locked, but I have TWRP :silly::laugh::laugh:
so I tried to flash a custom rom :
the edyoblue-nougat-v9-0-finale (i can't post the link.... i'm a too young member...)
but without success...
:crying::crying:
Keep trying! I've given up, tried several ROMs including the stock..... nothing gets me past the splash screen. Keep me informed.
Hi....
just try the following:
Download the Firmware you want for your s6 edge with the tool SamFirm!!!
Do not use v_0.3.6 just use the v_0.3.4!!! because 036 show 1,9Gb but 034 show 2,4Gb size
you will see in the following link:
https://drive.google.com/file/d/1ezbpgKYp5gvtMVsXnjWcjDGPFYoRovFN/view
Use the Odin 3.12.3 for flashing the Firmware....for Odin needs to run as administrator
Good luck
solong speedson
Thanx for the info, I gave all of the above a whirl but still can't get past the splash screen. Is there something out there that sets everything back to default? ... if there is, where is it? and how do I apply it? If there isn't then I'll just assume the phone is bricked. ?
Hey guys ,
Well this is a rooting adventure that took a turn sideways since it's not really the root that has put my phone in a unusable state , but oem unlocking . My phone , an Infinix S5 has this message in the boot logo that says "oem unlocking is enabled and device cant be trusted , starting in 5 secs" , it's not too big of a problem , but due to this message , it somehow does not let a factory reset commence or let me enter fastboot mode with the key combinations . My rooting before actually went pretty nice and I was in a stable environment and then I started removing system apps (main reason to root my device) , turns out a few of them were a lil to critical and after a restart bricked by system img , so i re-flashed the system , boot and recovery partitions , well that led to it finally booting up but now , firstly asking for my previously set password and then showing a message saying that the data has been corrupted and needs to factory reset . And thanks to the oem unlocking message , it just wont start the factory reset ! Nor could I Access fastboot to manually reset the phone and thereafter disable oem unlocking . I'm honestly stuck so bad , cant think of what to do . Infinix being a lesser known chinese company with close to none support on such topics , the device seems essentially bricked (this is my primary smartphone !!) . Any help on this guys ??
All help is highly appreciated !
Thanks !