Hello, I've rooted my OnePlus X with KingRoot (I have the stock recovery and the bootloader is locked), then I have tried to unroot with KingRoot and the root checker couldn't detect root access. Yesterday I've upgraded the OPX to OxygenOS 2.1.3-x and now the device is in bootloop but luckily I still able to boot in recovery. I tried to install the OxygenOS ROM via MicroSD card (8GB with only the ROM on it) but the installation fails and if I retry it says that the data space is less than 500MB. What can I do?
because the root can rename system/bin/app_process32 to app_processinit of other,so you can't use ota update your phone.
you can flash a twrp recovery,and flash full oxygen zip.don't use ota,the recovery tips you restore stock recovery,you need it,you can toch yse.
Thank you but I've already solved.
Inviato dal mio ONE E1003 utilizzando Tapatalk
Anyway with a locked bootloader you can't flash a TWRP.
Inviato dal mio ONE E1003 utilizzando Tapatalk
And What was the solution dude?
It would be good if you could explain how you solved it. If someone got the same problem he could find a possible solution here
You can go to the "Root OnePlus X without TWRP" thread and download the zip of the OTA upgrade on a MicroSD card, then boot your OPX into recovery and go on "install from local" > "SD card" > "OnePlusOxygenOTA", install it and reboot.
Inviato dal mio ONE E1003 utilizzando Tapatalk
i have got the same problem so i have tried a lot by flashing resurrection remix rom also but wireless connection is gone. ..so i advice you to contact oneplus customer care...he solved me the case...you can do it in ur home too if u have a internet connection
Related
.Hi. I tried to root my brand new Honor 7 phone today. I unlocked the bootloader, installed TWRP and finished by installing SuperSU. But when I tried to reboot the phone it just went back into TWRP. I have tried to factory reset, clear caches and data but that didn't seem to fix it. I am able to fully use all functions of TWRP.
I downloaded the stock ROM file and placed it on the phone, but when I tried to install it I was prompted with an ''no MD5 file found'' error. The last 5 hours I've been trying to fix this and I really do miss the phone already, is there anyone here who can save it?
ADB Sideload
I also want to add that ADB Sideload is not functioning either, I'm stuck at on "Starting ADB sideload feature..."
You can not install a stock rom with a custom recovery.
Gesendet von meinem PLK-L01 mit Tapatalk
bamserl said:
You can not install a stock rom with a custom recovery.
Gesendet von meinem PLK-L01 mit Tapatalk
Click to expand...
Click to collapse
What am I supposed to do then? How can I get back my stock recovery?
After 9 hours of constantly trying to solve this I finally fixed it on my own, this thread can now be locked.
How did you flashed the stock rom?
byCorza said:
After 9 hours of constantly trying to solve this I finally fixed it on my own, this thread can now be locked.
Click to expand...
Click to collapse
How did you resolve this?
Thanks
How did you fix this?
Hi, I'm having a small problem here and need your help. A friend of mine flashed OOS 3.0.2 from TWRP and after that he forgot to fkash TWRP. Now the recovery is replaced with the stock recovery and he wants to root the phone. I tried flashing TWRP using adb but it does not work. Can anyone help with what is to be done. Thanks in advance.
Sent from my ONE A2003 using XDA-Developers mobile app
1) download the Grarak's TWRP Recovery from https://forums.oneplus.net/threads/mirrors-for-official-oxygen-os-roms-and-ota-updates.387615/.
2) Place it on your phone
3) Download and Install Fashify app from Play store
4) Use Flashify to install your Recovery image. It should recover TWRP.
5) Of course, you need to be rooted.
Enjoy !
Root method same as with previous Version of oos? (lollipop)
yes, you can root with Modified SuperSU v2.74 TWRP flashable zip from the link provided.
nabolito said:
1) download the Grarak's TWRP Recovery from https://forums.oneplus.net/threads/mirrors-for-official-oxygen-os-roms-and-ota-updates.387615/.
2) Place it on your phone
3) Download and Install Fashify app from Play store
4) Use Flashify to install your Recovery image. It should recover TWRP.
5) Of course, you need to be rooted.
Enjoy !
Click to expand...
Click to collapse
He has no root and no recovery to flash Su, so tell me, how should he flash recovery with Flashify?
AFAIK the only way now is to flash recovery with fastboot and then with recovery Su.
OP download the recovery provided here.
Flash it via fastboot
fastboot devices
make sure your device appears
fastboot flash recovery "filename"
Reboot into recovery
flash modified super su
Gesendet von meinem ONE A2003 mit Tapatalk
[email protected] said:
He has no root and no recovery to flash Su, so tell me, how should he flash recovery with Flashify?
AFAIK the only way now is to flash recovery with fastboot and then with recovery Su.
OP download the recovery provided here.
Flash it via fastboot
fastboot devices
make sure your device appears
fastboot flash recovery "filename"
Reboot into recovery
flash modified super su
Gesendet von meinem ONE A2003 mit Tapatalk
Click to expand...
Click to collapse
Hi, thanks for the instructions but i managed to flash the recovery using fastboot and adb. Only the hybrid recovery could be flashed, no other. I flashed the official TWRP but it did not boot, so i flashed hybrid twrp and it worked
Sent from my ONE A2003 using XDA-Developers mobile app
Good to know. The official TWRP can't boot because of the new Bootloader of OOS 3.x.
You need one of this three
hybrid
the modified orange one
or garags
Gesendet von meinem ONE A2003 mit Tapatalk
[email protected] said:
Good to know. The official TWRP can't boot because of the new Bootloader of OOS 3.x.
You need one of this three
hybrid
the modified orange one
or garaks
Gesendet von meinem ONE A2003 mit Tapatalk
Click to expand...
Click to collapse
Get Hybrid Recovery v3.2 (The most beautiful one)
Download
abhijeet715 said:
Hi, thanks for the instructions but i managed to flash the recovery using fastboot and adb. Only the hybrid recovery could be flashed, no other. I flashed the official TWRP but it did not boot, so i flashed hybrid twrp and it worked
Sent from my ONE A2003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello can you please help me I need some more info since I am new to this stuff, you opened oneplus 2 in fastboot mode then on cmd (shift+right click in the location of the hybrid twrp) you typed
"fastboot flash recovery <filename>.img" and the filename was the name of the hybrid twrp?
https://forums.oneplus.net/threads/...ts-oos-3-0-oos-2-x-x-h2os-mm-lp-cm-13.443032/ this is where you got it? version 3.2?
Also my android is 6.0.1 with OOS 3.0.2, have unlocked bootloader with this guide-> (http://missingtricks.net/root-oneplus-2-marshmallow-6-0-1/) , sorry about this I bricked my last phone and I dont have the money to fix my oneplus 2 if I brick it aswell, I want to be really carefull about this :/
Michael Ion said:
Hello can you please help me I need some more info since I am new to this stuff, you opened oneplus 2 in fastboot mode then on cmd (shift+right click in the location of the hybrid twrp) you typed
"fastboot flash recovery <filename>.img" and the filename was the name of the hybrid twrp?
https://forums.oneplus.net/threads/...ts-oos-3-0-oos-2-x-x-h2os-mm-lp-cm-13.443032/ this is where you got it? version 3.2?
Also my android is 6.0.1 with OOS 3.0.2, have unlocked bootloader with this guide-> (http://missingtricks.net/root-oneplus-2-marshmallow-6-0-1/) , sorry about this I bricked my last phone and I dont have the money to fix my oneplus 2 if I brick it aswell, I want to be really carefull about this :/
Click to expand...
Click to collapse
Let me make it easier and clear to you.
1. Install the drivers for OP2 (IMPORTANT)
2. You might have already downloaded adb and fastboot drivers. If not, download it here: http://forum.xda-developers.com/showthread.php?t=2317790
3. Unlock your bootloader in OP2, if you have not and enable USB Debugging from Developer Options.
4. Once you have installed Minimal adb and fastboot drivers, place the hybrid TWRP in the folder of Minimal adb and fastboot. Then Shift+Right Click and open the command line, type the commands (hope you know if not google them)
Then from fastboot, directly boot into recovery as at times OOS 3 replaces the custom recovery with stock recovery. From fastboot, press Power+Volume down until the 1+ logo shows up. You will be booted into custom recovery.
Hope this helps. In case of anything else you can PM me
[email protected] said:
He has no root and no recovery to flash Su, so tell me, how should he flash recovery with Flashify?
Click to expand...
Click to collapse
I thought he was at least rooted. Because this is what happened to me, when I flashed the signed flashable zip followed by the root zip, I forgot to update the TWRP.
My phone was working but I couldn't access to TWRP, but I was rooted. So, in this case, my reply with flashify works.
Thank you.
ok guys saw the threads as was also trying to flash TWRP .
The bottom line is with One plus 2 having Oxygen OS 3.0 it is difficult to fastboot TWRP previous versions but with latest version I was was able to install TWRP 3.0.2-2 using fastboot and adb. The link is dl.twrp.me/oneplus2/twrp-3.0.2-2-oneplus2.img (official site of TWRP) Once installed you can install latest SU.zip.
Cheers
Snapdragon model, unlocked officially, twrp and rooted, phone downloads update, and just shows mi logo on reboot, tried changing to rom to update.zip, still no go, what do I need to do different? Cheers
What ROM is your device on at present?
What is reported here: -
Settings - About Phone - MIUI Version
You have unlocked officially, so i assume your on a developer rom.
Get the latest developer rom from here and use the updater to flash that.
Make a backup on external sdcard first.
Not on dev Rom, currently on miui global stable v7.5.3.0, phone says update available to v7.5.4.0, which downloads to phone fine, guess it will not install as it does not like twrp or root....???
Flash the zip it downloads using TWRP. It downloads to a folder in the internal storage i think.
justinxfan said:
Flash the zip it downloads using TWRP. It downloads to a folder in the internal storage i think.
Click to expand...
Click to collapse
Yep already tried to Flash via TWRP, just reboots to MI logo and stays there with the phone getting hot
Try Wipe the data and of you have xposed install then uninstall it many time xposed give bootloop
android_smater said:
Try Wipe the data and of you have xposed install then uninstall it many time xposed give bootloop
Click to expand...
Click to collapse
Did full wipe and data wipe do not have exposed, still get mi logo only after update through twrp...
bryfly said:
Snapdragon model, unlocked officially, twrp and rooted, phone downloads update, and just shows mi logo on reboot, tried changing to rom to update.zip, still no go, what do I need to do different? Cheers
Click to expand...
Click to collapse
Changed to alka twrp: http://en.miui.com/thread-282773-1-1.html?mobile=2
Reflagged the rom, flashed superSU.zip. rebooted phone should be fine.
Sent from my Redmi Note 3 using Tapatalk
timberwolf60 said:
Changed to alka twrp: http://en.miui.com/thread-282773-1-1.html?mobile=2
Reflagged the rom, flashed superSU.zip. rebooted phone should be fine.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
downloaded alka twrp, tried to install via twrp and get the following :- could not find, META-INF/com/google/Andriod/update binary in Zip file.
bryfly said:
downloaded alka twrp, tried to install via twrp and get the following :- could not find, META-INF/com/google/Andriod/update binary in Zip file.
Click to expand...
Click to collapse
Because you downloaded the recoveryAlkaUpdate.zip, when you used root explorer it only contain the recoveryAlkaUpdate.img, extracted it and copied to internal phone storage or external sd card, then used twrp to flash recoveryAlkaUpdate.img or used flashify to flash it.
Sent from my Redmi Note 3 using Tapatalk
timberwolf60 said:
Because you downloaded the recoveryAlkaUpdate.zip, when you used root explorer it only contain the recoveryAlkaUpdate.img, extracted it and copied to internal phone storage or external sd card, then used twrp to flash recoveryAlkaUpdate.img or used flashify to flash it.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
managed the update to 7.5.4.0, had to uninstall TWRP and root, it then installed update ok, then re rooted and installed TWRP again, thanks for your assistance guys
bryfly said:
managed the update to 7.5.4.0, had to uninstall TWRP and root, it then installed update ok, then re rooted and installed TWRP again, thanks for your assistance guys
Click to expand...
Click to collapse
Next time when you flashed a full rom by alka twrp, flashed superSU.zip , then rebooted phone will be normalised. I always used alka to flash rom without any problem.
Sent from my Redmi Note 2 using Tapatalk
After you flashed using twrp did it show a white bar going my across the screen?
justinxfan said:
After you flashed using twrp did it show a white bar going my across the screen?
Click to expand...
Click to collapse
No it just froze on the mi logo, only showed moving white bar after deleting twrp and root, have now taken the advice and installed alka twrp, will see what happens on next update.
I have TWRP installed and everytime I try to install the newest version I load into TWRP and get an error. Any way to either relock the bootloader or force the update?
Flash stock recovery
Enviado desde mi CLT-L09 mediante Tapatalk
TWRP has a fixed fingerprint key that doesn't work anymore with recent updates... If you are not using a custom ROM that supports TWRP (like AmazeROM) your only option is to flash stock recovery back (if you are using a custom ROM, and probably you are since you still have TWRP, probably you need to install other stock files as well, so maybe it's just simpler to flash stock firmware back).
davigar said:
Flash stock recovery
Enviado desde mi CLT-L09 mediante Tapatalk
Click to expand...
Click to collapse
lfom said:
TWRP has a fixed fingerprint key that doesn't work anymore with recent updates... If you are not using a custom ROM that supports TWRP (like AmazeROM) your only option is to flash stock recovery back (if you are using a custom ROM, and probably you are since you still have TWRP, probably you need to install other stock files as well, so maybe it's just simpler to flash stock firmware back).
Click to expand...
Click to collapse
Thanks guys! I'll just flash the stock recovery. seems the most simple since the OS is stock.
Hi guys, I installed twrp on lgp760 with flushfi and root, rebooted it in twrp I tried to install Cyanogen ROM , I swapped cache and choosed format, but now it locked and now I am not able to start in recovery mode neither in other modality, it is stack in lg logo , any suggestions?
Inviato dal mio MI 9 utilizzando Tapatalk