Hello,
I use galaxy tab 10.1 P7500 rooted.After i flash ROM ICS 4.0.4 P7500XXLQ8_P7500OXALQ8_P7500XXLQ8_HOME.tar.md5 with mobile odin my GT stuck at logo after reboot(see video).Then i go back to recovery to restore backup.but their be like this ( see Attacment).So i want flash back stock ROM with ODIN via PC but my PC said "USB NOT RECOGNIZED".please Help me how to do.already search solution but not find.
Sorry for bad English.
video-youtu.be/dEGyCrkgXm8
Pretty sure your phone needs to be in download mode for Odin to recognize it. If your device is in download mode, maybe it would be a good idea to reinstall drivers and Odin?
hello guys I bought my first android fone, S3,
it was preinstalled with 4.1.1 version I updated to 4.1.2 using kies but it only changed the version, I was hoping it would format everything and would start my s3 from brand new stage but it didn't, I want to know how can I install 4.1.2 thru pc and it installs the rom from scratch and s3 should boot like its out of box.
kindly tell me step by step which files I need and how to do it.
and like I said im new to android so I have no idea what to search in this forum.
thanks.
***NOTICE***
Before doing this do a back up in the recovery menu, search Xda if you aren't sure how. I'm not liable for any bricked, whether soft or hard, devices. Only use your DEVICE SPECIFIC ROMs and/or Kernels.
***NOTICE***
First off, Google Odin, download and install it and download and install your phones drivers to your computer, search on the forum for the KERNEL SPECIFIC Stock ROM for your S3, there are TUTs on Xda here on how to find out which one is for you, now, once you have the ROM downloaded normally its in .zip format, run Odin as administrator, right click it and select run as administrator, now, plug your phone into your computer and put it into download mode, Volume +/- and power at the same time until you see a yellow triangle, now press the Volume + button to continue, after that look in Odin to make sure you have the yellow COM number, you'll know if you have it, its highlighted yellow and says "COM:4" the number doesn't matter and may be different, if you don't have the COM number then re-install your phone drivers, now, open the Stock ROM .zip file and extract it to your desktop, open Odin and click PDA,now select the .tar file for the Stock ROM and press start and Wa-La, your phone should re-boot in approximately 10 seconds if all goes well.
Hope this helps.
**Current Setup**
AT&T SGH-i777 Galaxy SII
Android 4.2.1
Running CM 10.1 Nightly
ARMv7 Processor rev 1 (v71)
**Previous Setup**
AT&T HTC Inspire 4G
Running CM 9 Nightly
mostwant said:
hello guys I bought my first android fone, S3,
it was preinstalled with 4.1.1 version I updated to 4.1.2 using kies but it only changed the version, I was hoping it would format everything and would start my s3 from brand new stage but it didn't, I want to know how can I install 4.1.2 thru pc and it installs the rom from scratch and s3 should boot like its out of box.
kindly tell me step by step which files I need and how to do it.
and like I said im new to android so I have no idea what to search in this forum.
thanks.
Click to expand...
Click to collapse
BASICS Faqs and Guides read first .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Hi Friends
Recently i try to load jellybread rom for my samsung galaxy ace s5830i. previously i suing jellyblast rom, i followed the procedure what mentioned in the forum. now my phone stops in the logo itself. i try back again jelly blast still same. also tried odin but my usb not detected in system. kindly give me sollution. i am now phoneless.
vinoth
vinodlion20 said:
Hi Friends
Recently i try to load jellybread rom for my samsung galaxy ace s5830i. previously i suing jellyblast rom, i followed the procedure what mentioned in the forum. now my phone stops in the logo itself. i try back again jelly blast still same. also tried odin but my usb not detected in system. kindly give me sollution. i am now phoneless.
vinoth
Click to expand...
Click to collapse
Questions and problems go to Q&A section!
Sent from my Ace-i using Tapatalk 2
Hit ThanX if I helped, it won't hurt, maybe...
Hello,
You must download stock ROM (multifiles), and .pit file.
You must select the .pit file, the stock ROM files, and flash it. (Everything via Odin)
Are you sure you have the latest samsung drivers for your phone? if not download it from the internet.
And then follow the below steps:
Go to download mode(vol up & down + power buttons)
wait for sometime ,you will come to a warning screen on your phone,press the vol up button,wait again
now check on odin on your computer,odin should have communication with your phone.
And you should have necessary files to unbrick ,if not do the following:
Download the latest firmware>use splitfus to obtain the PDA,CSC and MODEM/PHONE files
you will also need bootloader file and .pit file
Use odin to unbrick.
Easy when done right
Hello all
First of all i did rooting on my phone and this is not the problem . then i installed pac-man kitkat 4.4.2 rom on my phone . i erased the old operating system and didn't do a backup . now i am unhappy with this kitkat and want my phone bk like originally . this kitkat doesn't applying any of the sensors on phone . its like a lot of options just gone . and now am searching for the original rom to install and cant find :crying: :crying: :crying: plz tell me what to do . my phone is galaxy S4 gt-i9500
turkman97 said:
Hello all
First of all i did rooting on my phone and this is not the problem . then i installed pac-man kitkat 4.4.2 rom on my phone . i erased the old operating system and didn't do a backup . now i am unhappy with this kitkat and want my phone bk like originally . this kitkat doesn't applying any of the sensors on phone . its like a lot of options just gone . and now am searching for the original rom to install and cant find :crying: :crying: :crying: plz tell me what to do . my phone is galaxy S4 gt-i9500
Click to expand...
Click to collapse
You can download the latest firmware for your Galaxy S4 (GT-I9500) from here, just make sure to change the country box to the country that is correct for your service provider. Once you have downloaded the firmware image you can use Odin and download mode on your phone to flash the firmware. To put your phone into download mode power off the device, then turn on the device holding the volume down button + home button + power button simultaneously, follow the onscreen prompts to put the phone in download mode. You will need Odin to flash the firmware to your device which can be obtained from here. I would recommend watching this tutorial video on how to flash the firmware to your device using Odin (Also make sure you have the USB drivers for your phone installed correctly on your computer or Odin won't recognize your device). Let me know if you still have questions I'll be happy to help you out.
shimp208 said:
You can download the latest firmware for your Galaxy S4 (GT-I9500) from here, just make sure to change the country box to the country that is correct for your service provider. Once you have downloaded the firmware image you can use Odin and download mode on your phone to flash the firmware. To put your phone into download mode power off the device, then turn on the device holding the volume down button + home button + power button simultaneously, follow the onscreen prompts to put the phone in download mode. You will need Odin to flash the firmware to your device which can be obtained from here. I would recommend watching this tutorial video on how to flash the firmware to your device using Odin (Also make sure you have the USB drivers for your phone installed correctly on your computer or Odin won't recognize your device). Let me know if you still have questions I'll be happy to help you out.
Click to expand...
Click to collapse
thank u for the quick replay and for this website ill follow your instructions and tell you what happened with me
am sorry but i cant find my correct country/provider at all so wt will happen if i download another firmware with another country ???
turkman97 said:
am sorry but i cant find my correct country/provider at all so wt will happen if i download another firmware with another country ???
Click to expand...
Click to collapse
Which country/provider are you looking for? I would suggest taking a look at this article, additionally I would take a look at this thread for instructions on what to do in your case. If you still have questions please let me know.
Hi
I unsuccessfully tried to root my YP-GI1CW using the process described at:
http://forum.xda-developers.com/showthread.php?t=1852546
I realise now it was the wrong process but unfortunately my player now has the "firmware upgrade encountered an issue".
I would like to recover if if possible but Although Odin can detect the device when attached, adb does not see any devices. Im not sure if I can make the damage any worse but would appreciate any help in recovering my device.
Thanks - xdanewbie
Did you make a backup of your ROM first off
Second: can you get in recovery
Third: if you want to superuser try superoneclick to root your device
Fourth:you have to be careful not to do things like that it's very dangerous to the device.
Sent from my YP-G70 using XDA Free mobile app
troy5890 said:
Did you make a backup of your ROM first off
Second: can you get in recovery
Third: if you want to superuser try superoneclick to root your device
Fourth:you have to be careful not to do things like that it's very dangerous to the device.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
Hi
No, i didnt make a backup
I can start the media player with power-vol down-home and i get into the download screen but when i continue i then get the "firmware upgrade encountered error" message.
I definitely will be more careful now. is my devicce broken forever ?
Thanks - xdanewbie2014
xdanewbie2014 said:
Hi
I unsuccessfully tried to root my YP-GI1CW using the process described at:
http://forum.xda-developers.com/showthread.php?t=1852546
I realise now it was the wrong process but unfortunately my player now has the "firmware upgrade encountered an issue".
I would like to recover if if possible but Although Odin can detect the device when attached, adb does not see any devices. Im not sure if I can make the damage any worse but would appreciate any help in recovering my device.
Thanks - xdanewbie
Click to expand...
Click to collapse
As long as you can access download mode you should be able to get the device working again. I'd try heimdall (get suite 1.3 I believe) instead of Odin. It usually works better. You just need to find the Odin stock package for your device.
Sent from my YP-G1 using XDA Free mobile app
xdanewbie2014 said:
Hi
No, i didnt make a backup
I can start the media player with power-vol down-home and i get into the download screen but when i continue i then get the "firmware upgrade encountered error" message.
I definitely will be more careful now. is my devicce broken forever ?
Thanks - xdanewbie2014
Click to expand...
Click to collapse
No you didn't break your device forever. All you have to do is install your stock rim that suites your device and flash it with hemidall
Sent from my YP-G70 using XDA Free mobile app
Hi
I have found all the files I need here
http://forum.xda-developers.com/showthread.php?t=1531850
BUT I cant get the device into download mode. I start the device with Powe+vold down+home key and it asks me to press vol up to continue. However, when I press vol up I get the "firmware upgrade encountered an issue" error.
Boy am i learning now
Thanks - xdanewbie
Hi
I realised that Heimdall was failing as it was using the standard sansung USB drivers. Im now trying to figure out how to stop those drivers from loading every time i plug in the YP-GI1.
In the meantime, I used ODIN to try and load the PIT and PDA rom image.
It appears to work but then the write fails (see attachment)
Any help would be appreciated - Thanks
.
xdanewbie2014 said:
Hi
I realised that Heimdall was failing as it was using the standard sansung USB drivers. Im now trying to figure out how to stop those drivers from loading every time i plug in the YP-GI1.
In the meantime, I used ODIN to try and load the PIT and PDA rom image.
It appears to work but then the write fails (see attachment)
Any help would be appreciated - Thanks
.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=51762484 on heimdall did you follow my instructions on "----Installing device's driver for Hemidall----"? That's how I got it to install the correct drivers. Note: This is for restoring a YP-G1 (Galaxy Player 4.0) so don't use that restore file.
Is This Progress ?
obscuresword said:
http://forum.xda-developers.com/showthread.php?p=51762484 on heimdall did you follow my instructions on "----Installing device's driver for Hemidall----"? That's how I got it to install the correct drivers. Note: This is for restoring a YP-G1 (Galaxy Player 4.0) so don't use that restore file.
Click to expand...
Click to collapse
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
xdanewbie2014 said:
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
Click to expand...
Click to collapse
First you would need to take the right package for your device as I explicitly written it was made for YP-G1 only. (See the YP-G1CW) you would need in that case, something so you can fully restore your device. Maybe you can find it in the 4.2 general forum.
And even so you said it was made for the 4.2, the file says it's for YP-G1 a.k.a the 4.0.
Envoyé de mon Nexus 7 en utilisant Tapatalk
xdanewbie2014 said:
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
Click to expand...
Click to collapse
Did you try getting the 4.2 drivers from Samsung Kies and then using zadig? Also it seems like you're using an S2 restore, which isn't for your device. The comment I linked you to is for restoring a YP-G1 so you would have to get the right heimdall package for your 4.2 like zaclimon said.
Sent from my YP-G1 using XDA Free mobile app
zaclimon said:
First you would need to take the right package for your device as I explicitly written it was made for YP-G1 only. (See the YP-G1CW) you would need in that case, something so you can fully restore your device. Maybe you can find it in the 4.2 general forum.
And even so you said it was made for the 4.2, the file says it's for YP-G1 a.k.a the 4.0.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
Yep, Im officially an idiot. I did not even know the firmware was for the 4.0. I had missed the different between the YP-G1 and theYP-GI1
I have now found the correct rom here
http://forum.xda-developers.com/showthread.php?t=1884071
However, i have tried every version of Odin from 1.3 to 3.0.9 and they all fail to complete the Nand write (see below)
I have tried 2 pc's with 2 cables and all versions of Odin.
Any other pointers would be appreciated.
Thanks - xdanewbie
xdanewbie2014 said:
Yep, Im officially an idiot. I did not even know the firmware was for the 4.0. I had missed the different between the YP-G1 and theYP-GI1
I have now found the correct rom here
http://forum.xda-developers.com/showthread.php?t=1884071
However, i have tried every version of Odin from 1.3 to 3.0.9 and they all fail to complete the Nand write (see below)
I have tried 2 pc's with 2 cables and all versions of Odin.
Any other pointers would be appreciated.
Thanks - xdanewbie
Click to expand...
Click to collapse
I think you are going to have to use Heimdall for this. Try and get the drivers installed for this device, and see if zadig picks it up.
Day 4
Hi
OK. It appears that I can either setup my PC to Use Heimdall (which requres the samsung KIES drivers NOT to be installed) or Odin (which requires the drivers to be installed)
I have now deinstalled the kies usb drivers, run drivecleanup to remove the old usb entries and downloaded Heimdall 1.3.1. When I run zdiag it picks up the samsung usb driver and install the heimdall driver.
Im trying now to use the rootted rom available (which seems ok for odin) available at
http://forum.xda-developers.com/showthread.php?t=1884071
However, if I try to use it with Heimdall 1.3.1 it says missing firmware.xml
I have a friends galaxy 4.2 also. Is there any way to extract the required info from that device or can anyone give pointers to where i might find a heimdall package for the YP-GI1CWXEU
Thanks - xdanewbie
In my opinion...heimdall is a little more advanced as opposed to odin. I suggest you stick to Odin...the flash might have failed because you flashed the wrong files before. From your thread...I believe you will get the PIT file...flash that and then flash the ROM and if you want, the kernel.
EDIT: I tested Odin v3.04...and it works fine with my YP-GI1.
Sent from my XT760
drakonizer said:
In my opinion...heimdall is a little more advanced as opposed to odin. I suggest you stick to Odin...the flash might have failed because you flashed the wrong files before. From your thread...I believe you will get the PIT file...flash that and then flash the ROM and if you want, the kernel.
EDIT: I tested Odin v3.04...and it works fine with my YP-GI1.
Sent from my XT760
Click to expand...
Click to collapse
Hi
Thanks for your help. I have the rom from the link above but where would i get the pit file from ?
Thanks - xdanewbie
Update: I found the PIT file for the international 4.2 version. I used odin 3.04 with the pit file followed by the rom and my device its now working again Is there any way now to get rid of the Salaxy S2 logo ?
Either way, many thanks to all who helped and I hope this thread helps those who were as silly as I was !
Thanks - xdanewbie
To remove the yellow triangle, you need to use a USB JIG, google the term to know what I mean. There are no other ways to do the same.
Sent from my XT760
drakonizer said:
To remove the yellow triangle, you need to use a USB JIG, google the term to know what I mean. There are no other ways to do the same.
Sent from my XT760
Click to expand...
Click to collapse
Hi I used this usb jig which not nly removed the yellow triangle but thegalaxy S2 logo as well. My player now looks exactly like it did before.
http://www.ebay.co.uk/itm/Micro-USB...UK_Mobiles_Accessories_RL&hash=item4ab688d076
PS: For those who may be interested, 4.2 case seem very expensive. I purchased this (whch is for a galaxy S2) and its a perfect fit but you need to
extended the button holes with a dremel.
http://www.ebay.co.uk/itm/Luxury-Ge...lePhonesCasesPouches&var=&hash=item48626b4b8c
Many thanks to all those who have helped a newbie learn a little bit more.
xdanewbie