Hi,
yesterday I have tried to flash AOSGP rom on my phone. I was successful but the rom was not recognizing any sim-card. Restoring the original system failed because the backup file was broken. So I tried to flash the FTF for the E2333 but this image reboots the phone a few seconds after bootup.
Please can anybody provide a newer image for the E2333 (FTF or TWRP)?
Thx
Related
Hello,
Why some phones requires bootloop fix on .570/575?
And what bootloop fix exactly does? I found that there are OLDER firmware files.
IMHO i have worse cellular network coverage than on 5.1.1 and the signal is sometimes "floating".
Bootloop fix is actually modem firmware files. There is no need to flash that anymore if you have Official MM FTF.
Once you finish flashing a prerooted rom on TWRP, Turn off the phone instead of reboot. Then
on Flash tool select the MM Official FTF, exclude System and Partition and flash it. Phone will boot normally.
AlanDS said:
Bootloop fix is actually modem firmware files. There is no need to flash that anymore if you have Official MM FTF.
Once you finish flashing a prerooted rom on TWRP, Turn off the phone instead of reboot. Then
on Flash tool select the MM Official FTF, exclude System and Partition and flash it. Phone will boot normally.
Click to expand...
Click to collapse
I've been wondering about this to, if I use prf creator to pre root MM, I still won't need bootloop fix?
I seriously have a Xperia z2 tablet castor 521 but when ever I try to flash a ROM, I get error 7 with :This package is for "Castor" device, this is a "Sirius". What did I do wrong? I have tried to flash a custom recovery to correct this, I currently have a stock 23.5.A.0.570 firmware installed, what do I need to flash to fix this? Boot.img?
EDIT: Apparently I had to flash boot.img from another stock rom to proceed with any rom installation.
Can anyone plz upload the stock boot and recovery as I have the rootpack ones for F3212 and I want to revert to the original without reflashing the stock firmware again.
Anybody can PLEASE share, need it or my phone is destroyed coz i accidentally destroyed my backup
EDIT:
FOUND OUT A SOLUTION
- FLASHED boot.img FROM B130 FIRMWARE
- STILL BOOTLOOPED
- FLASHED MAGISK 13.3 WHICH MODIFIES THE BOOT.IMG
- BOOT LOOP AGAIN
-AFTER 4 BOOTLOOPS HUAWAI RESCUE DOING FACTORY RESET
>>>Sucesful boot into ANDROID
-----------------------------
NOW ONLY STUCK BY ENTERING PIN ----> DOESN'T ACCEPT MY PIN
Hello, i've got a similar problem. after trying to flash emui 5.1 supersu.zip the phone bootlooped. after restroring with twrp backup the phone crashed after the "emui-registration/welcome" dialog. tried to flash b130 via twrp and dload method. do you have any ideas? maybe by flashing boot.img? and where can i find the b130 boot.img? Thx!
4r44444 said:
Anybody can PLEASE share, need it or my phone is destroyed coz i accidentally destroyed my backup
EDIT:
FOUND OUT A SOLUTION
- FLASHED boot.img FROM B130 FIRMWARE
- STILL BOOTLOOPED
- FLASHED MAGISK 13.3 WHICH MODIFIES THE BOOT.IMG
- BOOT LOOP AGAIN
-AFTER 4 BOOTLOOPS HUAWAI RESCUE DOING FACTORY RESET
>>>Sucesful boot into ANDROID
-----------------------------
NOW ONLY STUCK BY ENTERING PIN ----> DOESN'T ACCEPT MY PIN
Click to expand...
Click to collapse
I extracted it with Huawei Update Extractor from UPDATE.APP provided in this thread "https://forum.xda-developers.com/honor-9/how-to/firmware-honor-9-stf-l09c432-b130-2017-t3649673" (you must extract update.app from firmware and than use huawei update extractor windows app to extract the extracted UPDATE.APP - I only extracted the boot image... phone booted succesful, had to do another hard reset via TWRP coz it didn't accept my (right!) PIN... now works... only fingerprint scanner and navbar buttons does not work... now I only need the BOOT.IMG from my old firmware (B100) and flash via bootloader... I think this will fix the problem....
I do not guarantee this things to work maybe crushing your device even more do it only if you risky
Hi guys,
yesterday I succesfully unlocked bootloader on my Mate 10 PRO (Bla-L09) and installed LineageOS 15.1 with success.
The problem is that now I just want to recover my stock firmware on it.
I downloaded the update.zip from the site (for my branded phone) and it was C55 version but I don't know how to repair it. Just tried to reflash stock recovery and start recovery mode but with no success. Installation hang on 5% and then phone reboots automatically.
Already tried to flash SYSTEM.img (from Huawei Update Extractor) with fastboot: it flashes correctly but im impossible to boot the devices.
I am sure that I do something wrong. Can you help me please?
Hi,
Where have you found original stock rom. It is my impression that it is not available. Could you please provide a link?
Thanks
outlier91 said:
Hi guys,
yesterday I succesfully unlocked bootloader on my Mate 10 PRO (Bla-L09) and installed LineageOS 15.1 with success.
The problem is that now I just want to recover my stock firmware on it.
I downloaded the update.zip from the site (for my branded phone) and it was C55 version but I don't know how to repair it. Just tried to reflash stock recovery and start recovery mode but with no success. Installation hang on 5% and then phone reboots automatically.
Already tried to flash SYSTEM.img (from Huawei Update Extractor) with fastboot: it flashes correctly but im impossible to boot the devices.
I am sure that I do something wrong. Can you help me please?
Click to expand...
Click to collapse
After flashing back stock system.img you need to Factory Reset in stock recovery. Alternatively use HWOTA: https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Always make a Twrp backup of your rom so you don't have to worry about flashing back like this.Thats what I do and I have never had a issue.