Hey, I'm running a non-genuine Win7, and I cannot seem to put my device ( Xperia SP ) into fastboot mode.
I've installed the drivers manually ( from HERE ) , but I still cannot enter fastboot (Turn device off -> hold volume up key -> connect usb to device while holding vol button).
It enter fastboot (turn on the blue led) and then shuts down after some 5 secnods..
anyone has any idea ?
Related
i flashed my phone using the hasa rom for GB and the rage kernel
now my phone wont enter fastboot or flashmode,
i've tried all methods: from flashtool (fastboot via ADB) and the reboot option in the phone itself
please note that the phone is in fine working conditon...but it just wont enter flash or fastboot mode
used the search option, found nothing
And you tried:
Turning off device, battery in, holding volume up (fastboot mode) and connecting while pressing volume up to pc (led should turn blue)?
Turning off device, battery in, holding volume down (flashmode) and connecting while pressing volume down to pc (led should turn green)?
Drivers are installed? Go to the flashtool installation folder -> drivers and install drivers again...
When I want to enter Fastboot on my Xperia Z Ultra I completely disable the phone -> hold down the volume+ button -> connect the USB cable. But the blue led indicator never turns on and i'm always Flashmode instead of fastboot. When I use a app like Quick Reboot (root) it works fine and I can access the phone through CMD.
Other things that I tried while connected: adb reboot-bootloader, but the device turns of and automatically enters Flashmode and can't be accessed by Fastboot.
Can someone help me, because it's pretty annoying.
So i have flashed cm13 firmware after deleting emmc appsboot and flashed flyme after rebooting my device dont turn on there is nothing except a black screen the phone keeps heating automatically and when i connect it to pc the recognize it as qdloader 9000E and the red led keeps blinking
Open the back case carefully,
Disconnect the battery n reconnect
Connect to fastboot by holding vol+ key n then plugging it into pc
Search Google for fastboot to edl script
N then do your stuff
You don't have to disconnect your battery. Hold the power button until the red light stops or it vibrates and quickly press power and vol DOWN buttons again and it will go into Fastboot. From there you can fastboot edl and flash
chaudharyjatin115 said:
So i have flashed cm13 firmware after deleting emmc appsboot and flashed flyme after rebooting my device dont turn on there is nothing except a black screen the phone keeps heating automatically and when i connect it to pc the recognize it as qdloader 9000E and the red led keeps blinking
Click to expand...
Click to collapse
Do not Try Anything...
1. Check if your device is recognised in Windows PC in Device Manager as Qualcom USB.
2. IF yes, you are good.
3. Download XiaoMI Flash tool (Old version)
4. Download the flash file, Fastboot file with .tgz archive file.
5. Once downloaded; extract using 7 ZIP anywhere.
6. Now, Open the battery case and disconnect the battery terminal of phone from motherboard
7. Connect to laptop via a Thick USB cable and see that device manager detect the Qualcomm USB interface. )(This indirectly is a Fastboot mode)
8. Open the miflash tool and select the extracted folder. Presee refresh. a connected device will appear in flash page.
9. No select flash all and Lock option below and press flah.
10. It will take about 300 to 400 seconds to flash. Once the flash competes, Mobile automatically reboots.
11. Now you have stock recovery and ROM. Do not play now with TWRP again. You bring the mobile to same state again.
Good luck
Dear android developers and hackers
i apply ota update after flashing stock rom using ygdp tool.
After its stucking in bootloop .
Cannot enter in to recovery mode by presssing hard keys.
Cannot connect to laptop it does not showing a device.
I cannot a flash a twrp in adb device comands. It shows no device found and no emulators found.
What can i do
kindly give me soluation .
I have only one mobile
Hi , try to uninstall all drivers for your device using USB Deview , once you do that Reboot your device , take battery off , hold power button about one minut , reinsert the battery , hold vol + and plug usb in if is not recognised then try on another usb port or another usb port. If that doesn't work press both vol + and vol - and see if is recognised .
Download from here : (scroll down )
https://www.nirsoft.net/utils/usb_devices_view.html
I want to root my phone ( Huawei Y6 Pro ), but I am stuck at, or atleast can't enter bootloader mode. After I turn off my phone I press the Vol Down button and then connect the usb cable to my PC and then some menu shows up completely in chinese and all it does is just inform me with the specs of the phone. A few months ago I had no problem entering bootloader mode, but now I can not.
Shimun said:
I want to root my phone ( Huawei Y6 Pro ), but I am stuck at, or atleast can't enter bootloader mode. After I turn off my phone I press the Vol Down button and then connect the usb cable to my PC and then some menu shows up completely in chinese and all it does is just inform me with the specs of the phone. A few months ago I had no problem entering bootloader mode, but now I can not.
Click to expand...
Click to collapse
You probably mean fastboot mode. You may enable USB debugging and type this in minimal ADB and fastboot:
adb reboot bootloader
Or you could try to press volume down and power for about 5 seconds and then you should connect the data cable.