Related
Just wondered if anyone has got one of these cases and what they thought of it?
http://shop.brando.com.hk/bwimatekjamleathercase.php
Xak said:
Just wondered if anyone has got one of these cases and what they thought of it?
http://shop.brando.com.hk/bwimatekjamleathercase.php
Click to expand...
Click to collapse
I do -- got it off eBay.
It's the case I've been happiest with so far. The small flap makes access to the screen pretty easy, and it's not that tough to unsnap the main flap to get access to the keyboard. Protection feels pretty good, and it doesn't add much bulk to it, as I like to keep the MDA in my pocket. Note that I haven't tried the belt clip.
Here are some cons:
-- When you open the snap to access the keyboard, the whole MDA is effectively available. It's somewhat snugly fit into the base of the case, but there's nothing else holding it in (no plastic straps, Velcro, etc.).
-- The positioning of the holes for the headset jack and the stylus silo leave a bit to be desired. Basically, they're a bit off-center. I'll eventually need to get an X-Acto knife and try to trim them out a bit more.
What I really want is the equivalent of the PDAir/Boxwave aluminum cases, but in a hard plastic so it doesn't degrade my signal (as I found out when I gave an aluminum case a shot).
-- The positioning of the holes for the headset jack and the stylus silo leave a bit to be desired. Basically, they're a bit off-center. I'll eventually need to get an X-Acto knife and try to trim them out a bit more.
The holes on mine are all aligned correctly.
Maybe, you got a defective one.
I did a thorough research before buying this case, and I think this is one of the best leather cases for HTC Wizard
Thanks for the info, I've gone ahead and ordered one. It does seem like a good case, and as I'm still using the one supplied with the phone it will be much better.
I bought a case from brando awhile back and used it on my imate jam, but when i dropped my jam, it just stopped working, so I decided not to use their cases for now.
balut said:
I bought a case from brando awhile back and used it on my imate jam, but when i dropped my jam, it just stopped working, so I decided not to use their cases for now.
Click to expand...
Click to collapse
You dropped your phone and it stopped working...and the case was supposed to prevent that? It's only to prevent cosmetic damage to the unit, not from free falling...
Link
Alright, The case the box came is in is kind of girly, anyways the quality of the case is amazing! It doesn't feel like it was cheaply made at all. It doesn't add too much bulk and I can still fit it in my skinnys(Levi's 511 Skinny 29 x 30) front pocket. The buttons are easily accessible even the the volume button being covered by the front flap it is still easy to press / locate since the case has a steep cut out for the volume buttons. Aswell as the S-Pen being so easily accessible. An added perk i liked about this case is that the speaker hole is actually covered by its own mesh. It also has an accessory hole so you could attach an accessory / lanyard to it. The Magnetized kick stand does not interfere with signal(atleast none i can tell).
Album
Zenus cases are the best I've seen so far for the Galaxy Note. I was thinking of getting this one as well but the color combinations just don't do it for me. Also, there's not cutout for the front speaker so it would be a little awkward to have to hold the front leather part back every time. I like that the case clips onto the metal part on the side and doesn't rest on the top of the phone so that a screen guard will thankfully be left untouched. I also love that it has a stand (The only reason I'm not getting the Zenus Masstige Stripe Case). I was wondering though, when the stand is set up, does the little latch (idk what it's called lol, the little thing used to clip on to the front cover to close the case) hide a little part of the screen since presumably, it'll be hanging down a little bit?
EDIT: Ordered it lol. It may have its flaws but it's the best I could find at its price range.
I have one of these (different colors, but this color looks great).
They are extremely high quality. As good or better than Vaja, for instance.
I've posted this before, that make sure you pay more and get the leather ones, as they have a few lines and some of the lines aren't as good quality.
This particular case is just great. The flap is a tad annoying but well worth it overall.
Note: one thing worth mentioning is that they are very light also.
would it be okay to use this case with a FULL skin applied? Ie. sides and back??
i'm sure the front would be okay, but just wanted to see if the sides of the phone with skin be okay.....
i've been looking at cases that have the flip cover, but they all look like it would peel off the side skins..... this one looks like it like it might be okay.
predation said:
would it be okay to use this case with a FULL skin applied? Ie. sides and back??
i'm sure the front would be okay, but just wanted to see if the sides of the phone with skin be okay.....
i've been looking at cases that have the flip cover, but they all look like it would peel off the side skins..... this one looks like it like it might be okay.
Click to expand...
Click to collapse
Hmmm...that's a tricky one. Obviously, it clips in tightly and securely so it might damage the skin during insertion and removal but once it's sitting in there, as long as you don't constantly remove it, it should be fine. I would recommend going to a store and testing out either this case or similar leather cases, but then again, if you harm the skin in the process, then this whole discussion is useless lol. On another note, why use a skin? The note is such a beautiful sleek beast. I wouldn't want to hide away any of the sides or take away from the beautiful protruding glass. That's why I hate my current Capdase Jacket XPose and am going for this case. Just increases the beauty XD. Anyways, yes, back on topic, I wouldn't recommend using a skin with this cover but hopefully someone who's actually tried it will reply.
Side-note: I ordered the Wine-Red / Dark Brown version
predation said:
would it be okay to use this case with a FULL skin applied? Ie. sides and back??
i'm sure the front would be okay, but just wanted to see if the sides of the phone with skin be okay.....
i've been looking at cases that have the flip cover, but they all look like it would peel off the side skins..... this one looks like it like it might be okay.
Click to expand...
Click to collapse
Here's a Flip case that would most likely not interrupt your skin.
Link
xCeejayy said:
The aluminum bumper wasn't doing it for me so I was looking around and I found this case. The colors are pretty subtle and calm. I'll update this with a review / pics of the case on when I receive it. I just wanted to share this case with you because it just looks so nice.
Link
Alright, The case came in the box it comes in is kind of girly, anyways the quality of the case is amazing! It doesn't feel like it was cheaply made at all. It doesn't add too much bulk and I can still fit it in my skinnys(Levi's 511 Skinny 29 x 30) front pocket. The buttons are easily accessible even the the volume button being covered by the front flap it is still easy to press / locate since the case has a steep cut out for the volume buttons. Aswell as the S-Pen being so easily accessible. An added perk i liked about this case is that the speaker hole is actually covered by its own mesh. It also has an accessory hole so you could attach an accessory / lanyard to it. The Magnetized kick stand does not interfere with signal(atleast none i can tell).
Album
Click to expand...
Click to collapse
These Zenus cases look great and seem very usable. But the downside is that they have a magnet at the back that interferes with S-pen functions (not with the signal). Check in the screen area in front of the magnet by trying to draw several long thin lines with the SPen that cross this area. That case was a money waste for me...
drkalo said:
These Zenus cases look great and seem very usable. But the downside is that they have a magnet at the back that interferes with S-pen functions (not with the signal). Check in the screen area in front of the magnet by trying to draw several long thin lines with the SPen that cross this area. That case was a money waste for me...
Click to expand...
Click to collapse
I tried this and it works fine for me Maybe contact Zenus for another one?
xCeejayy said:
I tried this and it works fine for me Maybe contact Zenus for another one?
Click to expand...
Click to collapse
I got these symptoms after a couple of days usage. I contacted the dealer and got a substitute with Capsule Stand Slide Series - White / Lime
When I got my Note off CL came with the Eel leather case. It's slick but I wish it was the capsule.
Sent from my SAMSUNG-SGH-I717 using xda premium
This is the Surface Case from Seidio, I just opened their website today and saw this!
http://www.seidioonline.com/htc-droid-dna-surface-case-black-p/csr3htdda-bk.htm
I'm really happy to see Seidio finally releasing some of their products for us, I'm deciding between picking up this black version of it or just waiting for the red one, or just waiting entirely on the Active case with built in kick-stand. Feel free to give your experience with seidio cases or anything seidio related
This is a lovely case I might order one as well I might wait to see if it drops in price 30 bucks isn't bad but I'm a cheap dude. Ill go on eBay see if its cheaper lol...good find tho :thumbup:
sent from my beastly powered DNA using Tapatalk 2
I'm going to definitely wait for their kickstand case. It's a no brainer for $5 more IMO. Thanks for the info though. Definitely glad as well that seidio decided to build cases for our device.
Sent from my HTC6435LVW using xda premium
well if someone does get this case let me know well it does with screen protectors cause the case i have now does not like my screen protector at all
The Active case is thicker. I've been waiting for the Surface case and holster combo. Thanks for the head's up.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
It would be great of they made an obexcase for our device. Then the water proofnesswould no longer be a question
Sent from my HTC6435LVW using Tapatalk 2
i just noticed this today too.. too bad i'm waiting for the active case with metal kickstand combo... and the money to buy it...
Just purchased the surface combo. Been waiting for this! I need a holster at work and nothing else has been very good imo for the DNA so far, at least that I have tried. Hoping it is as nice as my prior surface/innocase case combos were and that case is not too bulky.
tuxly said:
Just purchased the surface combo. Been waiting for this! I need a holster at work and nothing else has been very good imo for the DNA so far, at least that I have tried. Hoping it is as nice as my prior surface/innocase case combos were and that case is not too bulky.
Click to expand...
Click to collapse
Let me know how the surface case works for you when you get it! Would like to see how it plays with edge to edge screen protectors! If possible could you also do a mini review of the case?
Looks nice but the surface scratched the he'll out my my evo 4G and the soft touch texture started coming off... I'll wait for the reviews
Sent from my HTC Droid DNA.
Here my review on Seido Surface Combo. I really think Seido has done a great job at find the right balance with this case. It adds some protection for screen and camera by keeping them from connecting directly to flat surface. All of the edges are also covered. The thickness of case I think is just right. I was worried about added bulk as I have not liked any other case I have tried so far except the verizon shell which really adds nothing. Seido kept the back with same curve as phone. I am starting to actually like feel of device in case better than naked phone as phone does not feel quite as fragile or potentially as easy to drop. It is a bit easier to type in landscape mode as you have more to hold onto. Volume rocker and power button are easy to locate by feel now, and I have yet to accidently hit the volume rocker with the clever way this was designed. Closing usb port is not quite as easy with phone in case, but not overly hard either. The notification light on back has its own cutout also. Seido also did a great job at solvong the issue where speaker volume gets muted on some surfaces. I put the phone with this case on all the places where I cannot hear naked phone ring and the ringtone came out loud and clear. Have not yet tried case with a screen protector, but will try to get one so I can let people know how it works with them. Holster is great. Yes, it is a bit big to carry at waistband, but that is just because phone is the size it is. This holster manages to allow easy access while keeping phone secure (wore all day yesterday and no issues). The release hinge is a bit bigger than on prior Seido holsters, but it seems like it needs to be that way to add necessary stability. Has same swivel mechanism as other holsters also. Easy to put on and take off once you know how Seido cases are. Noticed no damage on phone from case, though could tell where soft lining touched phone (made a line that like fingerprints can be wiped away). Easy reach all eadges of screen; case does not hinder anything (with otterbox defender had trouble touching outer edges of screen). All in all, love this case and holster combo and it is definitely what will stay on my DNA from now on! If you have specific questions, let me know. Will try to get some pictures if I can find my actual camera.
tuxly said:
Here my review on Seido Surface Combo. I really think Seido has done a great job at find the right balance with this case. It adds some protection for screen and camera by keeping them from connecting directly to flat surface. All of the edges are also covered. The thickness of case I think is just right. I was worried about added bulk as I have not liked any other case I have tried so far except the verizon shell which really adds nothing. Seido kept the back with same curve as phone. I am starting to actually like feel of device in case better than naked phone as phone does not feel quite as fragile or potentially as easy to drop. It is a bit easier to type in landscape mode as you have more to hold onto. Volume rocker and power button are easy to locate by feel now, and I have yet to accidently hit the volume rocker with the clever way this was designed. Closing usb port is not quite as easy with phone in case, but not overly hard either. The notification light on back has its own cutout also. Seido also did a great job at solvong the issue where speaker volume gets muted on some surfaces. I put the phone with this case on all the places where I cannot hear naked phone ring and the ringtone came out loud and clear. Have not yet tried case with a screen protector, but will try to get one so I can let people know how it works with them. Holster is great. Yes, it is a bit big to carry at waistband, but that is just because phone is the size it is. This holster manages to allow easy access while keeping phone secure (wore all day yesterday and no issues). The release hinge is a bit bigger than on prior Seido holsters, but it seems like it needs to be that way to add necessary stability. Has same swivel mechanism as other holsters also. Easy to put on and take off once you know how Seido cases are. Noticed no damage on phone from case, though could tell where soft lining touched phone (made a line that like fingerprints can be wiped away). Easy reach all eadges of screen; case does not hinder anything (with otterbox defender had trouble touching outer edges of screen). All in all, love this case and holster combo and it is definitely what will stay on my DNA from now on! If you have specific questions, let me know. Will try to get some pictures if I can find my actual camera.
Click to expand...
Click to collapse
Wow thank you so much for this review, i can now safely go ahead and order this case from them now, unless i can find it on Amazon now. Either way you've closed any doubts about this case other then the who screen protector deal, let us know when you get your hands on one and how it plays with the case, thanks for this review once again i know many others will enjoy this as well!
Forgot to mention phone charges wirelessly through case with no problem.
Pictures of Seido Surface case and Holster are attached. They include front view, back view, side view, top view, bottom view, 3 views in holster and 2 views with only half of case on to give better idea of size of case.
I tried one of the verizon screen protectors. They do not go edge to edge so work fine with the case. Put one of the protectors such that it went to very bottom edge of phone (on phone in pictures). The case does lift it a bit if phone is held just right, but I could use the plastic thing to push bubbles away to lift edge of case just enough to push screen protector under the edge. I imagine it will be a bit of a challenge for true edge to edge protectors with this case, but might work after some tweaking. Seido is working on their own screen protectors for this phone so maybe they will look into the issue.
tuxly said:
Pictures of Seido Surface case and Holster are attached. They include front view, back view, side view, top view, bottom view, 3 views in holster and 2 views with only half of case on to give better idea of size of case.
I tried one of the verizon screen protectors. They do not go edge to edge so work fine with the case. Put one of the protectors such that it went to very bottom edge of phone (on phone in pictures). The case does lift it a bit if phone is held just right, but I could use the plastic thing to push bubbles away to lift edge of case just enough to push screen protector under the edge. I imagine it will be a bit of a challenge for true edge to edge protectors with this case, but might work after some tweaking. Seido is working on their own screen protectors for this phone so maybe they will look into the issue.
Click to expand...
Click to collapse
What ports does the holster cover? specifically looking at headphone and micro USB ports
ML417 said:
What ports does the holster cover? specifically looking at headphone and micro USB ports
Click to expand...
Click to collapse
Both the usb port and headphone jack are accessible when phone is in holster. Will get pics for you later if you would like them.
tuxly said:
Both the usb port and headphone jack are accessible when phone is in holster. Will get pics for you later if you would like them.
Click to expand...
Click to collapse
Someone had a camera I could borrow. Here are the shots.
tuxly said:
Someone had a camera I could borrow. Here are the shots.
Click to expand...
Click to collapse
that's great news, i have an external battery as well as a smartwatch i can control music with, so being able to keep the phone on the holster while doing either, and both, is great news
Glad it will work for you. I am extremely pleased with purchase of this combo!
i will still be waiting for the active case to release
** I will post some pictures later today - I'm at work currently **
The Nillkin Fresh case came about 2-3 days ago and I was quite excited. But that was short lived. The case is a faux-leather flip cover case with a thin plastic shell on that clips to the phone. It looks decent enough, but I have some problems with mine (possibly QC problems):
The case though didn't completely fit!! Along the right side (near the SD/SIM) it is a bit warped - not bad or noticeable unless your looking right at it and for it.
The case is held closed by a magnet, but the magnet on the flip cover is quite small which then requires it to be precisely over the other pole or it does nothing. Not a big deal, but I wish this was thought out better.
Additionally, one of the main features of the case is (link below) how the case being used as a stand. The flip cover is a tri-fold design which should act as a stand but I haven't had much luck with it. The inside of the seemingly leather flip cover is a soft touch, almost suede, material that is quite slippery. This plus the fact that the case seems to be needing to be broken in makes for the "stand" feature unusable... it falls right over currently. (I have tried multiple configurations).
Over all, I bought the case on eBay for $9.99 with no shipping cost (ships from china - companies home country) and it took about 15 days to get here (in the US). Not bad, but I am already looking for a replacement that will make my device feel premium again rather then cheap.
Would I recommend this case? Yes, but only as a temporary case until more come out - like the official Sony cases or a case from Incipio (link below).
** Complete side note: I had a Nillkin case for my old Nexus 4 which only lasted a few short months because the leather started to peel away from the flip cover! I knew this would be a temporary case when I bought it, so keep that in mind!
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3526&page=1
http://www.incipio.com/cases/smartphone-cases/sony-smartphones/sony-xperia-z-ultra-cases.html
I was fortunate to get to try that case out and many others (being in hk and china) - and I posted about this case. It's unfortunate you didn't read my post and what case eventually went with in the big Z ultra case thread.
This case is definitely not recommended if you want one to work well with desk stand, and want to use the trifold ipad style cover as a stand.
The snap-in style plastic mounts doesn't make it easy to pop in and out of to use the desk stand, and the plastic mounts are shiny thus looks and feels cheap.
Finally, the cover doesn't even come close to the quality and feel of the ipad cover, even the vinyl kind. The material is stiff and plasticky and most importantly doesn't fold together to function as a working stand at all. It will unfold/collapse and fall over.
In addition, there's an issue with the the magnet. With the magnet closed, there is a gap between the last third of the tri-fold cover and the phone's screen. This gap exists because the case (mold or design) is not the right fit - the wider flap makes it essentially unable to align with the opposing magnet. If you try to push the flap down to get rid of the gap, you inadvertently push/slide the magnet off and the cover comes loose. In practice, the magnet will never be engaged because you'll always push the cover down somehow (pocket, bag, stacking something on top).
The only Nillkin I recommend is the http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3516&page=1 shield case. I ended up buying the black one for scenarios where I don't want a flip cover. The fit is good, texture is good (good grippy backside), and it doesn't look too cheap (no shiny plastic). It's decent protection for rougher than usual situations. There are sections where there's a thin piece of plastic on the edge of the phone (like over the usb flap) where it feels weak, cheap and easily breakable. Besides that only issue, I like this case as a back-up.
For a flip cover case that works well with a desk stand, actually stands up, and feels decent quality - I recommend Kaso and Krussell. I went with Kaso as a cheaper alternative for now.
So I guess it's not just me... which is kind of a bummer, but I have already found a replacement. Now if only October 22 was here (my Birthday) I could get a new case!
Thanks for the replay, some good thoughts there!
toonhead85
Funny how the 2 Nillkin cases the OP talks about are the exact 2 I bought online.
I bought the white Fresh, and Yellow leather.
Anyway, after having used both, now I know that flip covers, despite the protection it gives, tend to get in the way of general use. Answering calls involve one extra hassle step.
Taking pictures, you have to roll the flip cover up into the triangle as if you are going to use it as a stand and hold it in your left hand, because simply flipping it and folding it over will obstruct the camera.
Nothing wrong with the build quality...I am sure it is better than most cheapos out there. All the useful ports are left uncovered (one of the reasons why I chose Nillkin...there is actual thought process that has gone into the design). If you want to use the magnetic charging port, not many other manufacturers apart from Nillkin make them uncovered.
The yellow I chose is less vibrant in colour (than what it seemed on screen), and does not go so well with the white ZU I have, so that got retired until the day I get SBH-52 and leave my phone in the bag.
For the Nillkin Fresh, I got in white, and am very happy with it, and currently in use.
It has a nice tight fit, seems to be made of good tough plastic, and the texture on the back helps with general grip.
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
The number of times that i thought that I had closed the USB port properly, but was still slightly open (thus not making it fully waterproof) has prompted me to get the magnetic charging cable. I knew it was something I wanted while I was out choosing the case, so for those who are still looking for cases, I won't say go Nillkin, but make sure you go for one that has the magnetic charging port uncovered.
Whether you buy DK-30 is a different debate. Some like it, but some find it expensive for what it is. There are not many covers out there tat allow you to dock with it on.
But the USB magnetic charging cable is something I believe every ZU owner should have. For that reason get a cover with the port uncovered.
jewelkobayashi said:
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
Click to expand...
Click to collapse
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
liqn7 said:
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
Click to expand...
Click to collapse
Here u go
jewelkobayashi said:
Nothing wrong with the build quality...
Click to expand...
Click to collapse
I came back to post a quick update about the case I got and this caught my eye... actually the build quality is the reason as well!!
The case is broken ><. On the top left hand side (near the charging port) the case has snapped. A piece is broken clean off and only after about 2 weeks. I know the case was $10, but I also had build quality issues with a Nexus 4 case, so I am going to say the quality is rather low.
With this new information, I am going to say stay away from this case. The long import time (from HK to US), and poor quality aren't worth it. Spend the few extra bucks and get a quality case you will have for more than a few weeks.
Just my 2 cents though...
toonhead85
Got myself an Xperia tablet z yesterday and love it, however I'm not a fan of the usb charging flap, so I have just decided to splash out £30 and buy a sgp-ds5 so I can simply slide my tablet in over night and charge without messing about
I'm looking for a case that can remain on, but still allow me to use the dock, I have a few simple needs from the case.
Protection is low down on my list, my tablet will never leave the house, the case is actually more of a stand, I am looking for a case that works as a great stand when I sit down and have the tablet on my lap.I never use the tablet at a table,I just use it when sitting on the couch or when laying in bed, I am looking for a stand that holds the tablet at a nice angel whilst on my lap?
The other thing is price I want one at a reasonable price, I like the official case, but it's silly money for me.
I see a lot about the poetic case, does it fit in the dock? Also the way it works as a stand, doesn't look like it would work well on a lap, looks like it works fine on a table, but as I said I never sit at a table.
Thanks
dougie175 said:
Got myself an Xperia tablet z yesterday and love it, however I'm not a fan of the usb charging flap, so I have just decided to splash out £30 and buy a sgp-ds5 so I can simply slide my tablet in over night and charge without messing about I'm looking for a case that can remain on, but still allow me to use the dock, I have a few simple needs from the case. Protection is low down on my list, my tablet will never leave the house, the case is actually more of a stand, I am looking for a case that works as a great stand when I sit down and have the tablet on my lap.I never use the tablet at a table,I just use it when sitting on the couch or when laying in bed, I am looking for a stand that holds the tablet at a nice angel whilst on my lap? The other thing is price I want one at a reasonable price, I like the official case, but it's silly money for me. I see a lot about the poetic case, does it fit in the dock? Also the way it works as a stand, doesn't look like it would work well on a lap, looks like it works fine on a table, but as I said I never sit at a table. Thanks
Click to expand...
Click to collapse
The only case I know of that can remain on the XTZ when sitting it in the charging cradle is Sony's XTZ case. I own the XTZ case and I found that even though the XTZ fit in the cradle with the case on, it was not really practical. I also own three other cases (currently using a Poetic case) which require the case to be removed before placing the XTZ in the cradle. But that is not a problem for me. It only takes a few seconds to remove the XTZ from its case or to put it back into its case. I also feel charging the XTZ with its case removed allows the XTZ to better dissipate the heat caused by the charging, which is a good thing.
Cat McGowan said:
The only case I know of that can remain on the XTZ when sitting it in the charging cradle is Sony's XTZ case. I own the XTZ case and I found that even though the XTZ fit in the cradle with the case on, it was not really practical. I also own three other cases (currently using a Poetic case) which require the case to be removed before placing the XTZ in the cradle. But that is not a problem for me. It only takes a few seconds to remove the XTZ from its case or to put it back into its case. I also feel charging the XTZ with its case removed allows the XTZ to better dissipate the heat caused by the charging, which is a good thing.
Click to expand...
Click to collapse
Thanks for the reply, when you say the genuine xtz case fit the charger but was not practical can you please explain that a little for me? Do you just mean not practical in the great dissipation sense? Or for another reason?
I would agree keeping any electrical device cooler rather than letting it get warm is always a good thing, but Sony seem to recommend using both accessories together and have designed the 2 to work together, so you would hope the tablet would still be well within its safe heat tolerances when using the case and dock?
The xtz case seems almost perfect for myself, it looks very sturdy to use to prop the tablet on my lap, it fits the charger, it is the lightest and thinnest case I believe?
Just the price really puts me off, £55 is a lot of money compared to most cases
If I went for the nice budget poetic case, and just removed it to charge, would the poetic case hold the tablet at a decent angle on my lap and be nice and steady without me having to hold the tablet firm? Or am I asking too much of any case to so that? Seems like most are just designed to sit on a table and play a movie, but I am trying to help get my tablet sat at the correct viewing angle for surfing whilst on my lap without the need for me to touch it, much like a laptop would.
Thanks
dougie175 said:
Thanks for the reply, when you say the genuine xtz case fit the charger but was not practical can you please explain that a little for me? Do you just mean not practical in the great dissipation sense? Or for another reason?
Click to expand...
Click to collapse
For another reason. When the XTZ is placed in the cradle with the Sony case on it, the case's front cover must be fully opened and folded towards the rear of the tablet and the case's rear cover must be pulled slightly away from the lower part of the XTZ so it will slide into the cradle. The part about the case's rear cover is not a problem, but the case's front cover wants to lie flat on my desk's top, which means a lot of clear area is needed behind the cradle and on my desk's crowded top, that is a not practical. So, it is better for me to slide the XTZ out of the case when I want to place it in the cradle. Again, the XTZ quickly and easily slides into and out of the case, so that is not a problem for me.
dougie175 said:
I would agree keeping any electrical device cooler rather than letting it get warm is always a good thing, but Sony seem to recommend using both accessories together and have designed the 2 to work together, so you would hope the tablet would still be well within its safe heat tolerances when using the case and dock?
Click to expand...
Click to collapse
I agree; however, having worked with electronic devices for more than 40 years and knowing heat is their enemy, an enemy that will shorten their life, I tend to give concern to heat dissipation. It is a choice from experience to keep my XTZ as cool as possible.
dougie175 said:
The xtz case seems almost perfect for myself, it looks very sturdy to use to prop the tablet on my lap, it fits the charger, it is the lightest and thinnest case I believe? Just the price really puts me off, £55 is a lot of money compared to most cases
Click to expand...
Click to collapse
The Sony case is a nice looking, sturdy case. The problem I had with it was the ugly elastic band that holds the case closed. The case will not remain closed without the band because the case does not have a magnet in its front cover like the Poetic and other cases do. The band also caused a notch to be formed on the long edge of the case which subtracted from the case's nice look, and the band would occasionally snag on something when I would pull the XTZ from my messenger bag.
dougie175 said:
If I went for the nice budget poetic case, and just removed it to charge, would the poetic case hold the tablet at a decent angle on my lap and be nice and steady without me having to hold the tablet firm? Or am I asking too much of any case to so that? Seems like most are just designed to sit on a table and play a movie, but I am trying to help get my tablet sat at the correct viewing angle for surfing whilst on my lap without the need for me to touch it, much like a laptop would. Thanks
Click to expand...
Click to collapse
I like the Poetic case even though it only provides three choices of angles for placing the XTZ; (1) right side up (Sony logo at top of XTZ) at 60º (0º being flat on a desk top), (2) up side down (Sony logo at bottom of XTZ) at 30º, and (3) nearly flat on a desk top. I say "nearly flat" because when the case's front cover is folded towards the rear of the XTZ, the front cover will not allow the XTZ to lie perfectly flat. For me, the choice of angles are enough. I mostly used my XTZ at the 60º angle and the case keeps my XTZ fairly firm in place, and I have no problem browsing web sites or watching videos. When I am doing a lot of typing, I use my XTZ at the 30º angle and again the case keeps my XTZ fairly firm in place. The case's front cover has a strong magnet that holds the case securely closed. The magnet is so strong that it also holds the case's front cover against the rear cover when the case is fully folded open. One thing I do not like is the USB port access hole cut into the fold of the case. Not only does the hole subtract from the case's nice look, it also makes folding the case open a little awkward. I wish I had bought the Poetic case before its manufacturer started cutting the hole in the case. The original Poetic cases did not have the hole.
Cat McGowan said:
For another reason. When the XTZ is placed in the cradle with the Sony case on it, the case's front cover must be fully opened and folded towards the rear of the tablet and the case's rear cover must be pulled slightly away from the lower part of the XTZ so it will slide into the cradle. The part about the case's rear cover is not a problem, but the case's front cover wants to lie flat on my desk's top, which means a lot of clear area is needed behind the cradle and on my desk's crowded top, that is a not practical. So, it is better for me to slide the XTZ out of the case when I want to place it in the cradle. Again, the XTZ quickly and easily slides into and out of the case, so that is not a problem for me.
I agree; however, having worked with electronic devices for more than 40 years and knowing heat is their enemy, an enemy that will shorten their life, I tend to give concern to heat dissipation. It is a choice from experience to keep my XTZ as cool as possible.
The Sony case is a nice looking, sturdy case. The problem I had with it was the ugly elastic band that holds the case closed. The case will not remain closed without the band because the case does not have a magnet in its front cover like the Poetic and other cases do. The band also caused a notch to be formed on the long edge of the case which subtracted from the case's nice look, and the band would occasionally snag on something when I would pull the XTZ from my messenger bag.
I like the Poetic case even though it only provides three choices of angles for placing the XTZ; (1) right side up (Sony logo at top of XTZ) at 60º (0º being flat on a desk top), (2) up side down (Sony logo at bottom of XTZ) at 30º, and (3) nearly flat on a desk top. I say "nearly flat" because when the case's front cover is folded towards the rear of the XTZ, the front cover will not allow the XTZ to lie perfectly flat. For me, the choice of angles are enough. I mostly used my XTZ at the 60º angle and the case keeps my XTZ fairly firm in place, and I have no problem browsing web sites or watching videos. When I am doing a lot of typing, I use my XTZ at the 30º angle and again the case keeps my XTZ fairly firm in place. The case's front cover has a strong magnet that holds the case securely closed. The magnet is so strong that it also holds the case's front cover against the rear cover when the case is fully folded open. One thing I do not like is the USB port access hole cut into the fold of the case. Not only does the hole subtract from the case's nice look, it also makes folding the case open a little awkward. I wish I had bought the Poetic case before its manufacturer started cutting the hole in the case. The original Poetic cases did not have the hole.
Click to expand...
Click to collapse
Thank you for taking your time write such an in depth reply, the fact that the Sony case requires so much room has totally out me off that one. Thanks for pointing that out to me. So a case that it's easily removed would be the next best option for me I guess, which you have confirmed the poetic it's simple to click in and out.
Thanks again for explaining the angle functions of the case, can you just confirm the case works well when using it as a stand on your lap? It is a major concern to me and the only thing stopping me buying the poetic really. Thanks
dougie175 said:
Thanks again for explaining the angle functions of the case, can you just confirm the case works well when using it as a stand on your lap? It is a major concern to me and the only thing stopping me buying the poetic really. Thanks
Click to expand...
Click to collapse
I cannot honestly comment on how well the case will work standing on your lap because I rarely place my XTZ on my lap, but when I do, I have the case fully folded open with the XTZ lying flat.
Cat McGowan said:
I cannot honestly comment on how well the case will work standing on your lap because I rarely place my XTZ on my lap, but when I do, I have the case fully folded open with the XTZ lying flat.
Click to expand...
Click to collapse
Ok no worries, thanks for all the help. Guess I'll just have to buy one and see if it's fits my needs, at least they are reasonable money even if it isn't right.
Try too look on amazon you will see a lot of different cases. I have the cradle and the sony case I have no problem using both togethrre at all.
Sent from my SGP312 using xda app-developers app
mrlokoo said:
Try too look on amazon you will see a lot of different cases. I have the cradle and the sony case I have no problem using both togethrre at all.
Sent from my SGP312 using xda app-developers app
Click to expand...
Click to collapse
Thanks I've spent hours on Amazon and eBay looking at cases I've gone for a roxfit Sony one with the 3m double sided tape, to try first, seems like the lightest simple solution for me, that I think will go in the dock with the case tucked behind it!
Yeah so have I. They really didn't make as much covers for it. I dont how that 3m sticky cover looks. I have the slide in cover from Sony. If not go on YouTube and try to see what people have chosen out.
Sent from my LT30at using xda app-developers app
Use the roxfit case, not sure the exact name but its really low profile and the flap is magnetic
almo40192 said:
Use the roxfit case, not sure the exact name but its really low profile and the flap is magnetic
Click to expand...
Click to collapse
Roxfit Book Case Ultra for Sony Xperia Z Tablet at Amazon.com for $38.78 USD plus shipping cost. I'm not liking the idea of having to use double-sided adhesive tape to attach a case to a $600 USD tablet.
Cat McGowan said:
Roxfit Book Case Ultra for Sony Xperia Z Tablet at Amazon.com for $38.78 USD plus shipping cost. I'm not liking the idea of having to use double-sided adhesive tape to attach a case to a $600 USD tablet.
Click to expand...
Click to collapse
Op said protection wasn't a concern. Besides, the adhesive is surprisingly good. There is no way the two come apart without extreme force. Mine stays on the dock or in the bedroom so protection wasn't a concern for me either, plus its the slimmest case I've found.
So just buy the sony case, the slide in one or the adhesives type. cause you are looking for the slimmest one. At the same time it looks good having the same namebrand together.
Sent from my SGP312 using xda app-developers app
My dock and roxfit arrived today, after much research I felt the roxfit would be the best for me so ordered one on Sunday.
Works a treat, I have no fear of the adhesive doing any damage. Fits perfectly into the dock very tidy with the cover pinned behind with the magnet.
It is almost the prefect case for me, its only fault is that it tends to slide down if you try and get to much angle on the screen which is a shame, however if you keep it quite upright it works perfect and it's very strong.
Really impressed with how light and tidy this case is, may just look at modifying it to help hold the screen at a lower angle in future if I feel I require it.
Thanks for the help and advice
I've got the same issue, I want to buy the dock but it would mean having to remove the tablet from the case every time, its a tight fit so its quite annoying.
Was hoping there would be a case that would work with the dock (apart from the official one)
http://www.incipio.com/cases/tablet...her-ultra-thin-sony-xperia-tablet-z-case.html
That one looks quite thin, anyone think it'll work with the dock ?
Edit: nvm that one just seems to protect the sides and bottom.
any more successes with finding a case that fits the cradle?
anyone?
Roxfit Case
I have the Roxfit case, and can confirm that it does work with the dock.
Like other users I do find that it can slip down, if trying to use it as a stand, but not a great problem.
My main criticism is that because the front of the case is one rigid piece, when it is folded back, it covers up the camera!
The only way I have found to use it, is to hold it like an open book.
If it were divided into two or three flexible parts,(like an iPad case) it would be possible the fold it back on itself, and so allow the camera to be used.
Has anyone else noticed this problem, or have a solution?
The official Sony 'Natural Rubber' case (SGPCV5) will allow you to dock the tablet but it's pretty messy ... you can hinge the case away from the Xperia and have it folded back and splayed behind the dock.
Not at all ideal but possible if you really want to dock it without taking it out of the case. Personally, I'd only use the case if travelling somewhere with the tablet. At home it doesn't need a case (especially considering that cases add bulk) and since that's where the dock stays, it's never an issue that I want to dock the tablet in the case.