Hi guys I broken my honor 5x when I try Cyanogen mod unofficial, I don't know what's happen but I can't return on any ROM with EMUI or Custom rom modaco or stock.
Modaco or stock rom debloat flash is ok but It's block on honor logo not the first but Honor logo animation he don't pass the animation logo
Cyanogen it's ok with any flash boot is ok
If someone has a backup TWRP for honor 5x L21 I take it immediatly. I.m a french user sorry if my english is bad. And excuse me for moderator if my questions is not in the right section.
ahmitoo said:
Hi guys I broken my honor 5x when I try Cyanogen mod unofficial, I don't know what's happen but I can't return on any ROM with EMUI or Custom rom modaco or stock.
Modaco or stock rom debloat flash is ok but It's block on honor logo not the first but Honor logo animation he don't pass the animation logo
Cyanogen it's ok with any flash boot is ok
If someone has a backup TWRP for honor 5x L21 I take it immediatly. I.m a french user sorry if my english is bad. And excuse me for moderator if my questions is not in the right section.
Click to expand...
Click to collapse
You need to wipe data ,cache and dalvik cache from twrp first and then flash cm12.1 .
Sent from my KIW-L22 using Tapatalk
hi friends back in house,
The problem is not cyanogen beacause the phone work with only cyanogen but if I want to move in modaco or stock rom is impossible. Why? I don't know before I flash modaco for example I wipe data, cache and dalvik the flash working progress ok but after reboot, is bootloop (Is not a bootloop I don't know what explicated this) in honor animation. Thanks and excuse me for my bad english sorry!
If someone has a backup twrp for honor 5x L21 I thank in advance.
Try this: http://forum.xda-developers.com/honor-5x/how-to/guide-restore-honor-5x-t3321631
Sorry for quick instructions but these should help you.
Enter fastboot (Hold volume down, press power to turn on). Flash TWRP.
Reboot holding down both volume up and volume down, enter TWRP.
Do a factory reset within TWRP. Now mount storage to your computer and copy the "Custom ROM starter template" zip from http://www.modaco.com/forums/topic/377002-r3-custom-rom-starter-template-honor-5x-kiw-l21-b130/ as this is a full, untouched stock ROM ready for flashing with TWRP.
Download stock recovery image from https://www.androidfilehost.com/?fid=24421527759890493 and copy it to your 5x device.
Now first flash the ROM you downloaded. Once this has been installed, click Install in TWRP again then click the button bottom right to switch to image. Click the stock recovery image you copied to your 5x then select 'recovery'. Once you have flashed the recovery, exit TWRP and select reboot system.
The phone will boot into EMUI as normal. Quickly go through setup skipping everything then open Settings and do a full factory reset & wipe internal storage. This will take your 5x fully back to stock.
Hold volume down, press power to turn on. does not turn fastboot mode
deco164 said:
Hold volume down, press power to turn on. does not turn fastboot mode
Click to expand...
Click to collapse
of course I can enter on fastboot
flibblesan said:
Sorry for quick instructions but these should help you.
Enter fastboot (Hold volume down, press power to turn on). Flash TWRP.
Reboot holding down both volume up and volume down, enter TWRP.
Do a factory reset within TWRP. Now mount storage to your computer and copy the "Custom ROM starter template" zip from http://www.modaco.com/forums/topic/377002-r3-custom-rom-starter-template-honor-5x-kiw-l21-b130/ as this is a full, untouched stock ROM ready for flashing with TWRP.
Download stock recovery image from https://www.androidfilehost.com/?fid=24421527759890493 and copy it to your 5x device.
Now first flash the ROM you downloaded. Once this has been installed, click Install in TWRP again then click the button bottom right to switch to image. Click the stock recovery image you copied to your 5x then select 'recovery'. Once you have flashed the recovery, exit TWRP and select reboot system.
The phone will boot into EMUI as normal. Quickly go through setup skipping everything then open Settings and do a full factory reset & wipe internal storage. This will take your 5x fully back to stock.
Click to expand...
Click to collapse
thanks all xda's friend I try it now please let me some time and I tell you if is work see you later...
bootloader does not turn on
deco164 said:
bootloader does not turn on
Click to expand...
Click to collapse
I can enter on bootloader and flash twrp recovery but not recognize on minimal adb
deco164 said:
bootloader does not turn on
Click to expand...
Click to collapse
excuse me bootloader what is this the logo honor and android powered? or other things
Excuse my english is very bad I don't understand all the words sorry:angel:
flibblesan said:
Sorry for quick instructions but these should help you.
Enter fastboot (Hold volume down, press power to turn on). Flash TWRP.
Reboot holding down both volume up and volume down, enter TWRP.
Do a factory reset within TWRP. Now mount storage to your computer and copy the "Custom ROM starter template" zip from http://www.modaco.com/forums/topic/377002-r3-custom-rom-starter-template-honor-5x-kiw-l21-b130/ as this is a full, untouched stock ROM ready for flashing with TWRP.
Download stock recovery image from https://www.androidfilehost.com/?fid=24421527759890493 and copy it to your 5x device.
Now first flash the ROM you downloaded. Once this has been installed, click Install in TWRP again then click the button bottom right to switch to image. Click the stock recovery image you copied to your 5x then select 'recovery'. Once you have flashed the recovery, exit TWRP and select reboot system.
The phone will boot into EMUI as normal. Quickly go through setup skipping everything then open Settings and do a full factory reset & wipe internal storage. This will take your 5x fully back to stock.
Click to expand...
Click to collapse
Hi there,
I have a KIW-L21 and tried to go back to stock rom using this method.
I already had TWRP so I skipped that step, I downloaded the rom and stock recovery from the links you mentioned.
I couldn't find factory restore in TWRP however I wiped everything (except for the external SD)
Once i flashed the rom then recovery i rebooted the phone however after showing the honor + android logo, the phone is stuck on the colour changing honor logo but wont go any further.
I have booted in recovery more (emui) and tried to do a factory reset from there but after 14% of formatting data I get an error "Data and cache format failed" and the only option I have after is "shutdown system now".
I can't even reflash TWRP to restore from a backup as I can't enable USB debugging on the phone.
Can anyone help please?
*FIXED!* although I couldn't go past the bootlogo, I extracted update.app and put it in dload folder on my externat SD and rebooted phone while holding power, volume up + volume down. It updated and booted back to stock firmware ... Happy person again!
Related
Hi,
yesterday I tried to upgrade to CM7.2 from a nightly. As I've been doing, I put the .zip in the sdcard and flashed it with ROM Manager (wiping everything). After flashing it, my phone stucked at HTC white screen and there is no way to switch it on, it stays at this screen all the time.
For my disgrace, it's S-ON, so I can't boot into recovery and restore anything. I've tried to restore a nandroid with fastboot and it doesnt't work (says "Failed (remote: signature verify fail)").
Any ideas? It's definetly bricked? Is there any hope of repairing it?
Thanks in advance (and please forgive my poor english xD)
vitiin92 said:
Hi,
yesterday I tried to upgrade to CM7.2 from a nightly. As I've been doing, I put the .zip in the sdcard and flashed it with ROM Manager (wiping everything). After flashing it, my phone stucked at HTC white screen and there is no way to switch it on, it stays at this screen all the time.
For my disgrace, it's S-ON, so I can't boot into recovery and restore anything. I've tried to restore a nandroid with fastboot and it doesnt't work (says "Failed (remote: signature verify fail)").
Any ideas? It's definetly bricked? Is there any hope of repairing it?
Thanks in advance (and please forgive my poor english xD)
Click to expand...
Click to collapse
What do you mean you cant boot into recovery because you are S-ON?
All you need to do is put the recovery file other wise known as flakeflash "UPDATE.ZIP" into the root of the SDcard, turn off your phone (Pull Battery), then press the down button and power button together, wait for the phone to do its stuff, then select recovery in the menu, the phone will reboot into red exclamation mark, press volume up and power, it will then go into stock recovery menu and will then look for the "UPDATE.ZIP" if all is well you should then go into the fakeflash version of clockworkmod recovery.
Does it boot when USB cable is plugged in (soft usb brick)?
ranger4740 said:
What do you mean you cant boot into recovery because you are S-ON?
All you need to do is put the recovery file other wise known as flakeflash "UPDATE.ZIP" into the root of the SDcard, turn off your phone (Pull Battery), then press the down button and power button together, wait for the phone to do its stuff, then select recovery in the menu, the phone will reboot into red exclamation mark, press volume up and power, it will then go into stock recovery menu and will then look for the "UPDATE.ZIP" if all is well you should then go into the fakeflash version of clockworkmod recovery.
Click to expand...
Click to collapse
Thank you very much, now I can boot into cwm, but I'm having some troubles when trying to flash CM7.2 (or even trying to restore any nandroid backup).
First, when I try to install CM7.2, it does it very fast, without showing any error, but when I restart the phone it gets stuck again on HTC screen.
Then I try to restore a nandroid backup but it doesn't find boot.img, system.img and data.img, skips all steps and restores nothing.
My last shot, try to install the last nightly I used, fails at the same point as when I try it with CM7.2.
I don't know what else can I do, any ideas? I hope there's still any chance for my Legend (and again forgive my bad english xD)
A few points, make sure the rom zip file you are going to flash is not corrupt or incomplete.
Boot into cwm recovery,
Make sure to format the boot, system, data, cache & ext, it wouldn't hurt to delete the dalvik cache too before flashing new Rom. Just remember NOT TO FORMAT SD card.
Using this method I have always been able to flash a new Rom.
Sent from my HTC Legend using xda app-developers app
ranger4740 said:
A few points, make sure the rom zip file you are going to flash is not corrupt or incomplete.
Boot into cwm recovery,
Make sure to format the boot, system, data, cache & ext, it wouldn't hurt to delete the dalvik cache too before flashing new Rom. Just remember NOT TO FORMAT SD card.
Using this method I have always been able to flash a new Rom.
Sent from my HTC Legend using xda app-developers app
Click to expand...
Click to collapse
I've tried this way but it didn't work
Ideas?
Thank you for your help.
vitiin92 said:
I've tried this way but it didn't work
Ideas?
Thank you for your help.
Click to expand...
Click to collapse
Prepare a new SD card in your PC (FAT32), put UPDATE.ZIP on it and a stock ROM, reboot into recovery, wipe all you can (factory settings) and flash the stock ROM, see if that works. If so, you could try to flash a custom ROM.
That is what I would try...
I'm too.
I can't up CookROm by Rom Manager,
but when i use ClockworkMod recovery, its OK
wim69 said:
Prepare a new SD card in your PC (FAT32), put UPDATE.ZIP on it and a stock ROM, reboot into recovery, wipe all you can (factory settings) and flash the stock ROM, see if that works. If so, you could try to flash a custom ROM.
That is what I would try...
Click to expand...
Click to collapse
I also tried your way but it's still broken
I don't know what else to do, seems dead xD
Thank you.
Some new ideas?
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
D03035790 said:
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
Click to expand...
Click to collapse
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
rcstar6696 said:
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
Click to expand...
Click to collapse
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
D03035790 said:
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
Click to expand...
Click to collapse
Use this one https://mega.nz/#!rI4y2bJS!VksDLNy_a8cy8x-VBviYRkTP2SdSBm7Rs9G445vUXCU
This is twrp but it works with cmbased roms.
Hello
I have a nexus 9 which I have rooted and flashed with TWRP
Today I attempted to flash Marshmallow onto my devices but after rebooting I am given a message that decryption has been unsucessful and that I has to factory wipe my tablet.
However if I press the factory restore button it takes me to TWRP recovery boot menu.
I would like to know what I have to do from that point onwards
Thank you
EDIT: Fixed
Hi,
when i tried to enter custom recovery twrp (after asking me to factory reset.. vol - + power) it actualy reset phon not enter twrp
it hapened after i install stock kdz..
any idea
gile81 said:
Hi,
when i tried to enter custom recovery twrp (after asking me to factory reset.. vol - + power) it actualy reset phon not enter twrp
it hapened after i install stock kdz..
any idea
Click to expand...
Click to collapse
Sounds like you have some reading to do start with this
https://www.google.com/amp/s/forum....-g5/how-to/info-autos-g5-thread-t3350648/amp/
It's a good read...... If you're still stuck know that after you fastboot flash TWRP you have to unplug and pull the battery. Because if you don't the stock recovery overwrites the custom upon reboot.
If you don't flash magisk or su or dmvertify once in recovery it will flash stock recovery upon reboot.
maybe the problem is to pull battery out... cause i already done this and i had a twrp and it work great... until installing the stock kdz
Hey all, so it appears that I screwed my phone, I am not sure how.
I was running LineageOS, and wanted to update to Android 10 one, so I followed the steps, and I think I screwed the sideloading part, so... long story short now when rebooting from OrangeFox RecoveryProject it says no OS detected, and when it boots it says encryption unsuccessful, I tried wiping and installing DisableForceEncryption_Treble_v17.2 and restarting, and the same thing happens.
I tried to flash through recovery both, and did not work:
https://xiaomifirmwareupdater.com/firmware/beryllium/
https://xiaomifirmwareupdater.com/archive/vendor/beryllium/
And when trying to flash through miFlash it doesn't work:
I go to fastboot in poco, hit refresh in miflash, it shows a device in the list, but the phone goes dark with 'something key to shutdown` written in the top left corner and if I hit the flash button nothing happens.
Can anyone assist with that please?
kishikaisei said:
Hey all, so it appears that I screwed my phone, I am not sure how.
I was running LineageOS, and wanted to update to Android 10 one, so I followed the steps, and I think I screwed the sideloading part, so... long story short now when rebooting from OrangeFox RecoveryProject it says no OS detected, and when it boots it says encryption unsuccessful, I tried wiping and installing DisableForceEncryption_Treble_v17.2 and restarting, and the same thing happens.
I tried to flash through recovery both, and did not work:
https://xiaomifirmwareupdater.com/firmware/beryllium/
https://xiaomifirmwareupdater.com/archive/vendor/beryllium/
And when trying to flash through miFlash it doesn't work:
I go to fastboot in poco, hit refresh in miflash, it shows a device in the list, but the phone goes dark with 'something key to shutdown` written in the top left corner and if I hit the flash button nothing happens.
Can anyone assist with that please?
Click to expand...
Click to collapse
This happened to me when I accidentally deleted the OS when flashing the latest MIUI 11 build (using TWRP). THIS IS HOW I FIXED IT.
Find a full firmware of whatever you wanted to flash, either Lineage or MIUI 11. Then flash via your recovery (you said you have orangefox). Use an external sd card, external USB or HDD since you technically wouldn't have access to your internal data. After flashing, same process as most updates, clear cache and dalkiv. Then flash a newer DFE (if you still want to decrypt, there is a page here in xda with it. Or go to miui forums Happybuddhist, the mod there, made a new one prebuilt with Magisk). Then reboot into recovery to make sure you keep your custom recovery. Once booted to recov. Boot to system. Should fix the issue.
You could check my guide here on how to unbrick your pocophone:
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
mecoromeo said:
This happened to me when I accidentally deleted the OS when flashing the latest MIUI 11 build (using TWRP). THIS IS HOW I FIXED IT.
Find a full firmware of whatever you wanted to flash, either Lineage or MIUI 11. Then flash via your recovery (you said you have orangefox). Use an external sd card, external USB or HDD since you technically wouldn't have access to your internal data. After flashing, same process as most updates, clear cache and dalkiv. Then flash a newer DFE (if you still want to decrypt, there is a page here in xda with it. Or go to miui forums Happybuddhist, the mod there, made a new one prebuilt with Magisk). Then reboot into recovery to make sure you keep your custom recovery. Once booted to recov. Boot to system. Should fix the issue.
Click to expand...
Click to collapse
I tried that, now I am a step forward I think, I flashed the stock firmware I found, and installed the latest stock ROM, rebooted (doesn't say no os anymore), but the only thing I see is a DELETE ALL DATA button and at the bottom 'Encryption was interrupted and can't be completed. As a result, the data on your phone is no longer accessible.
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account.'
Darklouis said:
You could check my guide here on how to unbrick your pocophone:
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
Click to expand...
Click to collapse
I have an issue with the MiFlash part, it seems that it doesn't work as I mentioned...
Aight all, formatting data partition to ext4 worked, now it is booting
kishikaisei said:
Aight all, formatting data partition to ext4 worked, now it is booting
Click to expand...
Click to collapse
Works now?
mecoromeo said:
Works now?
Click to expand...
Click to collapse
So I had an OS-less phone that don't get recognised in MiFlash, and I had orangeFox recovery.
The steps to fix were:
- Flash a full stock Firmware
- Flash the stock ROM
- Flash DFE
- Format data to ext4
- Reboot and it works
So thanks all for your help